Red Hat / Fedora :: Set Resolution To 1400x900?
Oct 3, 2010I have a emachine e19t5w 1400x900 monitor and fedora only has a setting up to 1024x768, what can I do?
View 2 Replies
ADVERTISEMENT
Debian :: Get Screen Resolution Up To 1400x900?
Jan 19, 2010I've been googling around for a while now and have been unsuccessful in setting up the screen resolution up properly... I have the manual for my monitor in case you ask for any of the specs. Other than unsuccessfully changing the xorg file, I've successfully went through the steps on Debians wiki site for NvidiaGraphicsDrivers in order to get my 9800gt working. I want to get the resolution upto 1400x900, but in the "Screen Resolution" window I only have the option for 640x480,50Hz
[Code]...
Ubuntu :: Xorg Doesn't Detect Monitor / Won't Display Higher Than 800x600 On A 1400x900 Monitor
Apr 3, 2010I installed Karmic on an older PC I had laying around, and the only trouble I am having is with screen resolution. It uses an old ATI chipset (onboard) for video, and it doesn't seem to do EDID correctly, so I can't display anything higher than 800x600. I have tried creating an xorg.conf, but it's still not working. How can I tell Xorg to ignore the fact it can't detect a widescreen monitor and display something larger than 800x600? I noticed the log says the sync's are out of range, but I am not sure how to fix it.
Here is my current xorg.conf.
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
Fedora Installation :: Get To Start The Install Process In A Resolution Other Than The "Optimum Resolution"?
Dec 5, 2009I have googled this and I refuse to believe the answer is "older video card" or "ubuntu". Does anyone know what boot parameters to use or how to get Fedora to start the install process in a resolution other than the "Optimum resolution"? resolution=640x40 vga=ask. These do not work. They set the debug display but when the graphical portion starts it defaults to the "optimum resolution" and the message displays "Cannot Display This Video Mode". As you consider the answer, think this is a new computer, blank hard disk, etc. I am installing Fedora 10. Tried 11 and Vista seems less buggy, prefer 10 or 9.
View 9 Replies View RelatedGeneral :: Video Resolution Out Of Range Change Setting To Recommended Resolution 1280x1024
Oct 14, 2010When I boot my computer I get this message: Warning Pc video resolution is out of range Change setting to recommended resolution 1280x1024 @60mh So I hit ctrl alt f1 I typed in Sudo dpkg-reconfigure xserver-xorg Nothing happens. It's been very frustrating because with everything that I've looked up it says that it's suppose to guide me through something. I desperately need my computer for school.
View 8 Replies View RelatedUbuntu :: Resolution Randomly Sets To Either 1024x768 Or 800x600 - Permanently Set A Resolution?
Dec 26, 2010Barebones installation. Manually start x with 'startx'. For some weird reason, the resolution randomly sets to either 1024x768 or 800x600. How do I permanently set a resolution?
View 1 Replies View RelatedUbuntu :: Actual Resolution Is Only 1024x768 - Can't Get The Native Resolution (1280x1024)
Apr 5, 2011I'm running 10.10. I have a Nvidia GTX 460. My actual resolution is only 1024x768. I can't get the native resolution (1280x1024). Nvidia-settings does not show this resolution. Google hasn't helped at all so far, and I have installed the Nvidia Driver.
View 2 Replies View RelatedUbuntu :: Changing A Display Resolution If You Have A Higher Resolution In 9.1?
Dec 7, 2009I searched the archives and didn't find anything on this, and was just wondering if there is a problem if you load Ubuntu 9.1 and have a display that's higher than 1024x768. I'd prefer a machine with a higher res, but I've heard that Ubuntu will only go as high as 1024x768.I'm guessing, however, that by 9.1, it should recog the higher res while loading and it won't be a problem, but thought I'd check before shelling out on a machine with a nicer display.
View 9 Replies View RelatedHardware :: Resolution Changed - Can't Return To Normal Resolution
Nov 20, 2010I was evaluating a live distro on a USB drive and the resolution got changed from my normal 1680X1050 to 1024X768. I normally run SuperOS (ubuntu derivative) at 1680X1050 on my 22" LCD flatscreen monitor. The users manual for the monitor says that the optimum resolution is 1680X1050. Now when I go to system, preferences, monitors the monitor is unknown and the highest resolution that is available is 1360X768. I have clicked on Detect Monitors but not sure anything is happening. I have went to system, administration, additional drivers but none show up. The OSD menu for the monitor is showing 1380X768. I haven't been able to make any changes to the setting. I push the button that is supposed to get me into the sub-menu but nothing happens.
View 3 Replies View RelatedGeneral :: Resolution Max Is 800x600 - Can't Set A Resolution Of 1024x760
Apr 2, 2010I've installed Ubuntu 9.10-karmic koala-and all runs good except screen resolution. I don't have any graphic card, and with windows I never had problems...but with linux max resolution is 800x600. what can I do to set a resolution of 1024x760 or similar ?
View 2 Replies View RelatedFedora :: Fedora 11 - Virtual Box 3.0.8 - Screen Resolution
Oct 28, 2009I am new to Fedora.I install it using virtual box 3.0.8.Screen resolution can not go higher than 800 x 600.
I am not familiar with vi.Is there any reconfiguring command just like in ubuntu?
Red Hat / Fedora :: Get The Right Screen Resolution
Feb 15, 2010I have 2 samsung lcd monitors same model....but the issue is after installing fedora 12 using one of the lcd monitors the resolution was perfect..after replacing with the other monitor i am not able to get the right resolution...even in display setting there is no option for that particular resolution..its seems to be strange..i am also not able to find the xorg.conf file in fedora.
View 2 Replies View RelatedRed Hat / Fedora :: Cannot Change Resolution Above 640 X 320?
May 30, 2011I am running Fedora Core 10 x64-bit. My video card is Quadro NVS 285 and the driver installed correctly. However I cannot change resolution above 640 x 320. Even adding resolutions higher than 640 x 320 such as 1600 x 1200 does not work so I created a new xorg.conf with the nvidia tool
Below is my xorg.conf file:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 270.41.19 Mon May 16 23:52:12 PDT 2011
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
[Code]...
My monitor is a Priceton Graphics VF912. I cannot find ANY information on this monitor on the internet as far as its Horizontal Sync and Refresh Rate. I know it is capable of at least 60 Hz because I have an identical one attached to my windows machine.
Someone please help. I have tried everything: running the xconfigurator tool, the nvidia xconfig tool, maually editing the xorg.conf and adding the resolutions myself and nothing works. Also xranr does not detect my monitor's capability correctly either. My system is an HP xw4300 with all stock parts except hard drive which is 500 gb sata. Using the stock "nv" driver does not give me resolutions above 800 x 600
Fedora :: Changing Screen Resolution In F11?
Aug 4, 2009I'm new to Linux I used to use Ubuntu, when I wanted to change resolution in ubuntu just go to xorg.conf but don't have this in Fedora 11. My resolution is 800x600 right now btw.
View 5 Replies View RelatedFedora :: Cannot Change Resolution To Above 640x480
Aug 12, 2009I am running fedora 11 live cd on a work computer waiting on a new harddrive. Ran knoppix and Gos 3.1 fine. they start at 800x600 but can relatively easily be changed to much better but fedora likes this really low resolution on the monitor 640x480. In Gos I unhide screens and graphics and change it there but fedora doesn't seem to have this basic setting utility. Where is it in fedora or its equivilant. The basic monitor setting only offers the 1 option and even this box is not fully visible, ok and cancel are cut off at the bottom. Going back to Gos for now, though someone managed to crash it while surfing the net. mATX Via chipset p4m800 s3 unichrome graphics. linux loads vesa drivers instead of s3 unichrome drivers.
View 1 Replies View RelatedFedora :: Why Is Screen Resolution Not Saved In KDE?
Sep 18, 2009After booting, logging into KDE i click the System Setting>Display and the screen resolution becomes 1024x768(60.0Hz).I do this everytime to get this resolution.Is there any way to save the screen resolution? And nothing happens if i press "Print Screen SysRq" from keyboard, so can't get any screenshot.
Why doesn't "Print Screen SysRq" work?
Fedora :: Screen Resolution Won't Go Above 800x600
Oct 19, 2009i recently installed fedora 11 i386 from fedora 8 i386. it was a fresh install. with 8 i had a 1024x768 res and my monitor is a 15.4" Polaroid LCD tv that has a max res of 1280x800. when i goto display and try to change the res it only shows 800x600 and below.
View 11 Replies View RelatedFedora :: Error In Dependency Resolution
Nov 12, 2009I seem to have a "small" problem with this error that I am given when try to update my Fedora 11 install using the command:
Code:
yum update
The error reads:
Code:
Missing Dependency: gnome-media = 2.27.91-1.fc11 is needed by package gnome-media-libs-2.27.91-1.fc11.i586 (installed) I have tried to the run the command: yum-complete-transaction but that has not bore any progress.
Fedora :: F12 (with KDE) Boots In Wrong Resolution
Nov 18, 2009I have no other gripes but one minor problem; After the boot, the KDE4 desktop starts with a resolution of 1152x864 instead of 1280x1024 selected at display settings. Strangely, it seems to activate the correct resolution instantly when I enter the display settings menu that shows the intended resolution (no need to apply anything). Going to the settings menu is a bit bothersome after every boot.
View 2 Replies View RelatedFedora :: Cant Set Resolution In Xorg.conf?
Feb 3, 2010While trying to implement some of the suggestions in the fedora 12 common problems (Intel Graphics)I discovered I cannot get the resolution correct using a xorg.conf file . Here is the file# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
[code]....
Fedora :: Limited Screen Resolution In F12
Feb 10, 2010I installed Fedora 12 into a virtual Machine (using virtualbox). Everything was perfect but the screen resolution is only 800*600. I cannot read the text fine and work is impossible.I searched already other posts but i couldn't find anything helpful.How can i set the resolution at least at ca 1280*1024?
View 2 Replies View RelatedFedora :: How To Set Screen Resolution At Maximum
Apr 30, 2010MY current screen resolution is 1200X800 but from my monitor manual I can see that it support these resolution also 1366X768, 1280X960, 1280X1024 but there is no such option to change in my fedora 12. How can I change that?
View 14 Replies View RelatedFedora Hardware :: Can't Get 1680x1050 Resolution On F13
May 31, 2010I performed a clean install of Fedora 13 (LXDE remix) over the weekend, and have been very pleased with it so far. However, I encountered a setback this morning when I brought my laptop into the office and hooked it up to an external Viewsonic VG2030wm LCD monitor. I can no longer utilize the native resolution of 1680x1050, although on F11 I could do so using the commands:
Code:
xrandr --output LVDS --off && xrandr --output VGA-0 --mode 1680x1050
The 1680x1050 mode is listed by xrandr (see below). However, when I run the above command the external monitor repeated alternates between a black screen and displaying my desktop (I'm not sure if the resolution is correct -- it's hard to tell).
[Code]....
Fedora :: 13 - Set Display Resolution 1152x864?
Aug 3, 2010I use an old notebook 15' LCD, (4:3) with the ridiculous (for fly eyes) resolution of 1400x1050. My eyes are not young anymore. On Ubuntu I could select the resolution of 1152x864 which is fine (1024x768 is too big and really makes me look like a grand-daddy...). How can I set 1152x864 on Fedora 13, if it is possible and how? Recent distribution do not rely on a xorg.conf file anymore. I use an older 9000 Mobility Radeon, and there are no proprietary drivers anymore, but the open source one. I gave it a try. Install the package to create an Xorg default and edited my resolution
Code:
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]...
I have changed the keyboard option to kill X with <Ctrl><Alt><Backspace> keys. That does not work--yet. No 1152x864 resolution.
Fedora :: Set Monitor Resolution To 1280*800 In F13?
Nov 5, 2010I have a 22'' monitor. And I would like to set resolution to 1280*800. This is the resolution set in Windows in my computer in another disk partition. So I dont understand why I can't do the same in Fedora 13. The default resolution is 1680*1050, but everything looks too small. Other options I can choose are uselesnes because it distort everything.
View 2 Replies View RelatedFedora :: Set Abnormal Resolution On 2nd Display?
Feb 23, 2011I am using a tv as a 2nd monitor and it has a very abnormal resolution. I have tried to set it but failed.
How do I do this?
Fedora :: Screen Resolution Does Not Seem Correct
Mar 10, 2011I have some experience with Linux (mostly Ubuntu) but absolutely none with Fedora. In fact I have needed to re-install twice just to get to this stage. I now have a fully updated Fedora 14 Gnome desktop. I have (finally) got Nvidia graphics drivers up and running. I can open the Nvidia Settings screen and everything looks ok except that the desktop screen resolution doesn't seem correct. I have a Sony Vaio with default screen resolution of 1920x1200. In Nvidia settings it was set to AUTO, but I've changed that as root user to 1920x1200 with a refresh rate of 60 Hz and rebooted. My desktop looks quite good, but it's not 1920x1200 - maybe 1600x1200? Perhaps. How do I confirm the current resolution?
I have run
Code:
glx info | grep direct
and the output is
Code: direct rendering: Yes
GL_EXT_Cg_shader, GL_EXT_depth_bounds_test, GL_EXT_direct_state_access,
Which I presume is ok?
Fedora Hardware :: How To Get 1280x800 Resolution
Jun 4, 2011In Windows Vista, I can use 1280x800 resolution. Fedora doesn't have this option in the display settings. The closest is 1280x960, but everything is stretched horizontally with this setting. Is there a way I can manually configure the screen resolution?
View 3 Replies View RelatedFedora :: How To Get Rid Of Dependency Resolution Errors
Mar 31, 2011I know I have this problem but how can I fix this dependency error?
Code:
Dependency Resolution Errors:
Package: vlc-core-1.1.8-1.fc15.x86_64 (rpmfusion-free-rawhide)
Requires: libstdc++.so.6(GLIBCXX_3.4.15)(64bit)Package: gstreamer-plugins-bad-0.10.21-2.fc15.x86_64 (rpmfusion-free-rawhide)
Requires: gstreamer-plugins-bad-free >= 0.10.21
Installed: gstreamer-plugins-bad-free-0.10.20-3.fc14.1.x86_64 (@updates)
gstreamer-plugins-bad-free = 0.10.20-3.fc14.1
Available: gstreamer-plugins-bad-free-0.10.20-3.fc14.i686 (fedora) .....
Fedora :: Setting Resolution To 1024x768?
Feb 14, 2010FC12-x86_64/KDE I want to set my resolution to 1024x768 using Intel Video adapter using the the i915 kernel module.
Putting the line below in /boot/grub/menu.lst on the kernel line after
rhgb quiet i915.modeset=1 vga=318
Is this the correct setting ?
I don't want to use a xorg.conf file.
