Fedora Installation :: Get To Start The Install Process In A Resolution Other Than The "Optimum Resolution"?
Dec 5, 2009
I have googled this and I refuse to believe the answer is "older video card" or "ubuntu". Does anyone know what boot parameters to use or how to get Fedora to start the install process in a resolution other than the "Optimum resolution"? resolution=640x40 vga=ask. These do not work. They set the debug display but when the graphical portion starts it defaults to the "optimum resolution" and the message displays "Cannot Display This Video Mode". As you consider the answer, think this is a new computer, blank hard disk, etc. I am installing Fedora 10. Tried 11 and Vista seems less buggy, prefer 10 or 9.
I am trying to install Fedora 11, but the monitor that I am using is only 640x480. When the window comes up to start the install, I cannot see any of the buttons or tabs for selecting the items. How can I adjust the resolution so that I can see the entire image in my screen?
I installed fedora 15 and i m not able to change the monitor resolution. if I open the display settings I just get the choice between 1024x768 and 800x600.
When I boot my computer I get this message: Warning Pc video resolution is out of range Change setting to recommended resolution 1280x1024 @60mh So I hit ctrl alt f1 I typed in Sudo dpkg-reconfigure xserver-xorg Nothing happens. It's been very frustrating because with everything that I've looked up it says that it's suppose to guide me through something. I desperately need my computer for school.
Barebones installation. Manually start x with 'startx'. For some weird reason, the resolution randomly sets to either 1024x768 or 800x600. How do I permanently set a resolution?
I'm running 10.10. I have a Nvidia GTX 460. My actual resolution is only 1024x768. I can't get the native resolution (1280x1024). Nvidia-settings does not show this resolution. Google hasn't helped at all so far, and I have installed the Nvidia Driver.
Optimum number of processes for procesor In Linux based os are there a optimum number of process for a processor that gives 'maximum performance' for system(or process range depend on cpu speed,cache etc...)? By 'maximum performance' I mean better performance?
I searched the archives and didn't find anything on this, and was just wondering if there is a problem if you load Ubuntu 9.1 and have a display that's higher than 1024x768. I'd prefer a machine with a higher res, but I've heard that Ubuntu will only go as high as 1024x768.I'm guessing, however, that by 9.1, it should recog the higher res while loading and it won't be a problem, but thought I'd check before shelling out on a machine with a nicer display.
I was evaluating a live distro on a USB drive and the resolution got changed from my normal 1680X1050 to 1024X768. I normally run SuperOS (ubuntu derivative) at 1680X1050 on my 22" LCD flatscreen monitor. The users manual for the monitor says that the optimum resolution is 1680X1050. Now when I go to system, preferences, monitors the monitor is unknown and the highest resolution that is available is 1360X768. I have clicked on Detect Monitors but not sure anything is happening. I have went to system, administration, additional drivers but none show up. The OSD menu for the monitor is showing 1380X768. I haven't been able to make any changes to the setting. I push the button that is supposed to get me into the sub-menu but nothing happens.
I am trying to install Fedora 10 from a live USB. It boots from the USB just fine, gets to the bootloader, the 3 coloured status-bar goes all the way, then my screen changes to "No Signal." I was able to boot into and install F11 in the exact same way on the same hardware. I think the problem is my monitor, its 16:9 and can't display some high 4:3 resolutions (like 1280x1024, 1440x900 is the optimal resolution). Is there any line I can add to the boot option in grub to change the resolution, or anything else, besides digging through my closet for a CRT just for the installation?
I've installed Ubuntu 9.10-karmic koala-and all runs good except screen resolution. I don't have any graphic card, and with windows I never had problems...but with linux max resolution is 800x600. what can I do to set a resolution of 1024x760 or similar ?
The installation went okay (to start with) on my newly formatted hard drive (after death of Windows XP), but I got an error about 3/4 of the way through. The system said something about starting the desktop to try to resolve or fault find the problem. So I now have a desktop with access to all the menu system. I am feeling my way around slowly getting used to the environment. I think there are bits missing from the install but with no frame of reference I cannot tell what exactly is wrong. One obvious problem is my Monitor screen resolution. In Monitor preferences it is set as 'unknown monitor'.
The detect monitor button does nothing and the resolution is set as 2048 x 1536 which is just too small to see properly on the screen. I am currently using zoom to increase within a window to use at all. I have tried opening a terminal and using the xrandr command which reports the following:
xrandr: Failed to get size of gamma for output default Screen 0: minimum 2048 x 1536, current 2048 x 1536, maximum 2048 x 1536. default connected 2048x1536+0+0 0mm x 0mm
I have a problem with my ubuntu 11.04 which is the resolution of the screen which is not supported by my monitor, so I can't see anything until the login screen appears. This actually was not a problem until my system stooped booting. Actually I do not know why is that because I can't see anything, it just stooped to view the login screen. For now the only information I can get is that the resolution params are: horizontal freq is 92.9kHz, vertical freq is 58kHz (which are out of my monitor's range). I would like to change this to get some informations from my system what is going on. Do anyone knows how do I change this startup resolution while the only thing I can do is to access the file system through LiveCD?
I installed a new pc with testing debian. It says that the Xorg cannot start due to resolution and ddc. But where is gone the xorg.conf? there is nothing into /etc/X11 no /usr/share/X11 ...? What happens to that file?
I am using Mercury p4VM800 mother Board and Intel PIV 2 GHz Processor. I have installed the fedora 10 Today. My screen resolution was automatically set to 650x480 and this is the only option available in graphical mode. I am not able to increase the resolution to 1024x768. I once again reinstalled the F10. during the installation, in the boot: option I have entered 'linux resolution=1024x768', but it won't work.
I m trying to install Fedora 10 on my computer with ATI Radeon HD3850 but when anaconda is loaded i get a very wierd resolution that my screen can't read. Using another screen i got an image but it was unreadable. It was like the frequency was wrong or something.
I'm still on GNOME with 800x600 resolution but I can't switch to 1024x768 because there is no 1024x768 option under resolution settings.My monitor is 17" so 1024x768 should work fine.My graphic card is integrated GeForce 6150.
I've installed Fedora 12, with the "basic video option." I've also installed an ATI driver via -- sh ./ati-driver-installer-9-12-x86.x86_64.run. However, in spite of installing the ATI driver, the resolution is poor. Rather than using the entire screen, only a reduced portion is visible/used. How to resolve this, so I can use the entire screen?
Ive just installed Fedora 12, max resolution option is 800*600 can someone advise how i can adjust or improve the resolution to at least 1200*700?Hardware: HP D330m, 2.8GHZ, 700MB RAM, VGA is a Intel Extreme Graphics Display.
on an older computer. I get as far as the screen that asks if I want to try or install and then I get a message saying the screen resolution is wrong and I need to reset. I even disabled the hard drive in bios and still get this message. computer was built to run xp and had ubuntu on it before. I tried to upgrade the nvidia driver and broke it.
I've decided to try Debian Lenny, after i succefully installed it without any problems there appears to be a problem - after loading the services and etc, my monitor turns off with a floating message saying it cannot display the current resolution, and that i should set it to 1280x1024@60Hz.
after the latest kernel update (2.6.32-26), my computer will no longer start up with a screen resolution higher than 800x600. Before this update, my computer would sometimes startup with this problem, but this could usually be fixed with a restart (or two if necessary). At this resolution the panels and a lot of tool-bars will not display properly, so I am limited as to what I can do using the GUI. my video card is an S3 unichrome (I think. It is built-in to the motherboard so I don't know for certain) my screen is an old ctr one I am running Ubuntu 10.04 on the 2.6.32-26 kernel.
Trying to get the updates for my Nvidia card, there are 3 updates in the update manager, but it gives me this error if I try to update them: -
Code:
nvidia-newest-kmod-common >= 177.82 is needed by package akmod-nvidia-newest-177.82-1.fc9.2.x86_64 nvidia-newest-kmod-common >= 177.82 is needed by package kmod-nvidia-newest-2.6.27.19-78.2.30.fc9.x86_64-177.82-1.fc9.8.x86_64 nvidia-newest-kmod-common >= 177.82 is needed by package kmod-nvidia-newest-2.6.27.21-170.2.56.fc10.x86_64-177.82-1.fc10.2.x86_64 nvidia-newest-kmod-common >= 177.82 is needed by package kmod-nvidia-newest-2.6.27.19-170.2.35.fc10.x86_64-177.82-1.fc10.2.x86_64 : Success - empty transaction
How can I lock in a screen resolution setting so Fedora has no other options to use? I had this problem and thought it went away as F11 has been behaving fine for weeks. Today it froze so I had to power cycle to reboot. It came back but had a crappy resolution setting and no higher options available.
I had to re-boot twice to get it to finally load the correct settings again. How can I fix this so it cannot boot to lower resolution? I want to LOCK IN the minimum resolution so it cannot boot to that crappy screen whenever it has a mind to. I feel I should be the one to decide what to load it's my computer !!
After install of FC13, my command prompt console and tty virtual consoles are a small box in the upper left corner of the screen. It contains tiny 80 characters by 25 rows. I want to fill the screen the old way. I assume the problem is high value screen resolution set automatically to match my display; with fonts based on the smaller pixels. This is NOT X-Windows. I can set that resolution but it has no effect on tty consoles.
It is NOT grub, which I can set with kernel parameter vga=0 to do exactly what I want. Messages from grub are big letters but change to tiny ones at init ("press 'I' for interactive startup" and the beginning of the boot log). This is not an issue with the same display using FC10 and no vga= parameter. Is there a reason that the kernel parameter failed after grub? Can I specify console resolution?
I just installed Fedora 14 via live CD on my netbook. I am trying to install open office and it's saying I have conflicting files but Open Office is not installed. Yes, this is a nooby question and I'm usually quite good with Linux but this has just baffled me.
I have just installed Fedora 10 and all went well except that the resolution is set to 1024x768, which is not cool on a 22" HP w2207h LCD monitor. When I bring up Monitor Resolution Setting the Mirror Screens is checked and 1024x768 is the highest resolution. If I uncheck Mirror Screens and select "Laptop" I am able to select 1680x1050, but it now has my desktop in the upper left hand corner of my monitor. Should I be looking for a driver for my i845G graphics processor?
PS: I am new to using Linux please be patient with my ignorance.
im a long time Ubuntu user that is giving Fedora a spin using Virtualbox on my Win7 machine. I have managed to get it up and running and guest additions working but have run into a problem with a few of the updates available in the Software Updates section.
It originally had around 75+ updates to install and seemed to do this fine. Unfortunately after a reboot and new check it comes up with 11 new updates. When I run install updates it gives me an error (see this post title) along with this bit of gibberish:
Code: PackageKit = 0.4.6-8.fc11 is needed by package PackageKit-glib-0.4.6-8.fc11.i586 sane-backends = 1.0.19-15.fc11 is needed by package sane-backends-libs-1.0.19-15.fc11.i586 perl = 4:5.10.0-68.fc11 is needed by package 1:perl-Pod-Escapes-1.04-68.fc11.i586 gnome-media = 2.26.0-6.fc11 is needed by package gnome-media-libs-2.26.0-6.fc11.i586 : Success - empty transaction I have searched around on google and came across similar issues for folks but in most cases they were trying to do a system update that caused the issue. I am not (this is a fresh install tonight of 11). Most other cases also didnt seem to have quite so many items listed.
I use a CRT screen and my graphics card is able to handle 1024x768 but sometimes when I start the computer the resolution is 900x600 and it is panning the 1024x768. I am currently running 800x600 but the low resolution is starting to get on my nerves. Also some programs(mostly games) require a resolution of at least 1024x758.
I have fedora 12 and I tried to change the screen resolution under the system menu to a higher one and it changed but now I dont have any menus and I'm not sure if I can use quick keys to go back to the display preferences to reset the screen resolution. Is there anyway I could run the display preferences by running a command in the bash shell or is there a quick key that allows menu access.
