I have 2 samsung lcd monitors same model....but the issue is after installing fedora 12 using one of the lcd monitors the resolution was perfect..after replacing with the other monitor i am not able to get the right resolution...even in display setting there is no option for that particular resolution..its seems to be strange..i am also not able to find the xorg.conf file in fedora.
View 2 RepliesI'm new to Linux I used to use Ubuntu, when I wanted to change resolution in ubuntu just go to xorg.conf but don't have this in Fedora 11. My resolution is 800x600 right now btw.
View 5 Replies View RelatedAfter booting, logging into KDE i click the System Setting>Display and the screen resolution becomes 1024x768(60.0Hz).I do this everytime to get this resolution.Is there any way to save the screen resolution? And nothing happens if i press "Print Screen SysRq" from keyboard, so can't get any screenshot.
Why doesn't "Print Screen SysRq" work?
i recently installed fedora 11 i386 from fedora 8 i386. it was a fresh install. with 8 i had a 1024x768 res and my monitor is a 15.4" Polaroid LCD tv that has a max res of 1280x800. when i goto display and try to change the res it only shows 800x600 and below.
View 11 Replies View RelatedI installed Fedora 12 into a virtual Machine (using virtualbox). Everything was perfect but the screen resolution is only 800*600. I cannot read the text fine and work is impossible.I searched already other posts but i couldn't find anything helpful.How can i set the resolution at least at ca 1280*1024?
View 2 Replies View RelatedMY current screen resolution is 1200X800 but from my monitor manual I can see that it support these resolution also 1366X768, 1280X960, 1280X1024 but there is no such option to change in my fedora 12. How can I change that?
View 14 Replies View RelatedI have some experience with Linux (mostly Ubuntu) but absolutely none with Fedora. In fact I have needed to re-install twice just to get to this stage. I now have a fully updated Fedora 14 Gnome desktop. I have (finally) got Nvidia graphics drivers up and running. I can open the Nvidia Settings screen and everything looks ok except that the desktop screen resolution doesn't seem correct. I have a Sony Vaio with default screen resolution of 1920x1200. In Nvidia settings it was set to AUTO, but I've changed that as root user to 1920x1200 with a refresh rate of 60 Hz and rebooted. My desktop looks quite good, but it's not 1920x1200 - maybe 1600x1200? Perhaps. How do I confirm the current resolution?
I have run
Code:
glx info | grep direct
and the output is
Code: direct rendering: Yes
GL_EXT_Cg_shader, GL_EXT_depth_bounds_test, GL_EXT_direct_state_access,
Which I presume is ok?
i am new with linux. i just installed fedora 6 on my pc. when i start linux os i get a message input signal out of range change setttings to 1280X1024-60Hz
Linux does not start...i changed the settings in windows and tried again but still the problem was not solved
I am using Mercury p4VM800 mother Board and Intel PIV 2 GHz Processor. I have installed the fedora 10 Today. My screen resolution was automatically set to 650x480 and this is the only option available in graphical mode. I am not able to increase the resolution to 1024x768. I once again reinstalled the F10. during the installation, in the boot: option I have entered 'linux resolution=1024x768', but it won't work.
View 4 Replies View RelatedI m trying to install Fedora 10 on my computer with ATI Radeon HD3850 but when anaconda is loaded i get a very wierd resolution that my screen can't read. Using another screen i got an image but it was unreadable. It was like the frequency was wrong or something.
View 1 Replies View RelatedJust installed F11. Been totally frustrated all day and all night with resolutions and DNS bugs. I installed system-config-display so I can get my video working properly. However, my monitor says it's out of range only on the login screen. How can I change the resolution for the login screen to match that of my working environment?
View 1 Replies View RelatedI installed FC11 on my laptop T43 and the video card is ATI Mobility Radeon x300. Now I have a problem of screen resolution with external monitor:
When I do presentation, I have to mirror the two monitors and both set to 1024*768, which is not perfect.
I remember that when I use RHEL 5 desktop edition, The system can automatically detect the external monitor and set it by itself ----- The laptop uses 1400*1050 and the external monitors such as projector uses 1024*768. But I haven't found such feature on FC11.
Im running fedora 11. I pressed the desktop effects button yesterday, and it suddenly changed my resolution to 800x600 when it was previously a lot higher. I couldn't fix it, so i reinstalled fedora 11. Couldn't fix it. Reinstalled Windows XP, then reinstalled fedora 11, and it fixed. Now, 12 hours on, it has gone back to 800x600. How can i fix this?!
View 4 Replies View RelatedHow do you get to the place to change the screen resolution through the menus in Fedora 13? When I couldn't find it, I ran gnome-display-properties, changed the resolution, restarted, and when it started back up the resolution was not changed!
What is the recommended way to change the screen resolution?
I have a intel 82845 video card. I want to set the screen resolution to 1600x1200. The highest choice under system> preferences > Monitors is1024x768. I see some posts saying to edit xorg.conf, but when I go to /etc/X11/ there is no xorg.conf. I know the card and my monitor will do this resolution, as I had it to that resolution in windows 7 and in XP.
View 1 Replies View Relatedit will NEVER let me change the screen resolution to 1440x900. It never gives me the option. I then spend hours looking for fixes, making Xconf files and editing them to no avail. The same is true for Fedora 15 (Beta). what can i do to get the 1440x900 option in my "Display" list in Fedora.
View 2 Replies View RelatedThe "Display" interface does not have a tab for "Hardware". The resolution does not go above 800 x 600.
There is no etcX11Xorg11.conf file.
There don't seem to be any display drivers in the software repository like in ubuntu.
I just install a GT240 video card on my desktop. The monitor that I've been using is a 50PH9UK plasma TV. The TV is connected to the desktop through VGA output. It appears that Fedora sets the screen size at 1360x860 by default. However, I prefer to set the screen size at 1020x768. The problem is that everytime I reboot the desktop, Fedora automatically resizes the screen to the default resolution (1360x860). I tried to look for the xcon.fig file in /etc/X11/ but it's not there. It appears that the xcon.fig is missing. Do you know how I can correct the automatic screen reset issue? By the way, I'm using the Fedora 14 KDE version.
View 4 Replies View RelatedHave just upgraded from FC12 - nothing seemed to work as it should - to FC13 which is working quite a lot better - automatically updating everything etc. - and I can now install what I want. The preupgrade installation bizzo seemed to work quite well. But I can't seem to be able to set a "default" screen resolution - being slightly geriatric I like 832x624 - but rather have to do it manually every time I start the OS. Have dug into it quite a lot but can't seem to find a way of having it boot up each time at the res I want it to.
And also, in the past, when clicking onto URLs in emails in Thunderbird they automatically opened themselves in Firefox - but not now. Even clicking "Open in Browser" doesn't seem to do it. Have to copy and paste etc. Surprisingly the other way seems to work OK - "Contact:" tags in Firefox open a Tbird email pane. Do I have to get into about.config or write a user.js file or that sort of thing?
FC13 Athlon 64x2/5000 2G RAM
I am using Fedora 12 with KDE4 and when I logged in to my KDE desktop for the first time, the screen resolution was 2048x1536, which was unusable for me. Therefore I set the screen resolution to 1280x1024 through the System Settings > Display in KDE4. However, whenever I log out and back in, the resolution falls back to 2048x1536. When I go to System Settings > Display to set it right, as soon as I click the Display button in System Settings, before changing any resolution, the screen falls back to the 1280x1024 setting
View 2 Replies View RelatedI am using FC10. how do I change the resolution of the "Boot Up" screen? My monitor is 1024x768 capable but my boot screen is 1280x1024. I don't get anything until it finally loads X Windows. When my machine is booting up I cannot see the screen because my monitor can't handle it. When I hook it up to my other monitor (1280x1024 capable) I can see the boot up screen. I'd like to be able to see the boot screen in case there are any errors I need to se. How do I change it?
View 1 Replies View Relatedvirtual console (run level 3,5) screen resolution. After installing fed12 the resolution is higher(which is good) then in previous versions. After upgrading from 11 -> 12 the resolution of the virtual consoles stays the same, to large. I already compared grub.conf,i18n which are the same. Where is the resolution configuration for fed 11,12?
View 2 Replies View RelatedI've installed Fedora 12 KDE using VMWare, but I can't for the life of me get my display settings to stick. When I change the resolution, my display responds appropriately but upon logging out or rebooting, these settings are lost. Am I missing something completely obvious here?
View 14 Replies View RelatedI just did an update and now my screen resolution is down to 1024x768 from 1280x1024. I tried to change it using the System->Preferences->Monitor menu item, but it is already set to the max it allows. I noticed that the monitor is unknown and hitting Detect monitors doesn't change anything.
Here is my graphics controller:
[root@nc1lt6812a ~]# lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02)
The monitor is a Planar PL1910M.
My intel drivers rpm:
[root@nc1lt6812a ~]# rpm -qa | grep intel
xorg-x11-drv-intel-2.11.0-4.fc13.i686
The rpms that were installed:
[root@nc1lt6812a ~]# rpm -qa --last | grep '22 Jun'
vim-X11-7.2.411-1.fc13 Tue 22 Jun 2010 06:22:40 PM EDT
policycoreutils-python-2.0.82-31.fc13 Tue 22 Jun 2010 05:47:08 PM EDT
[Code]....
After install of FC13, my command prompt console and tty virtual consoles are a small box in the upper left corner of the screen. It contains tiny 80 characters by 25 rows. I want to fill the screen the old way. I assume the problem is high value screen resolution set automatically to match my display; with fonts based on the smaller pixels. This is NOT X-Windows. I can set that resolution but it has no effect on tty consoles.
It is NOT grub, which I can set with kernel parameter vga=0 to do exactly what I want. Messages from grub are big letters but change to tiny ones at init ("press 'I' for interactive startup" and the beginning of the boot log). This is not an issue with the same display using FC10 and no vga= parameter. Is there a reason that the kernel parameter failed after grub? Can I specify console resolution?
I've just installed Fedora 14 on my DELL inspiron mini 1018. Installed the latest updates (including the latest kernel). Everything works fine except the screen resolution cannot be set to higher than 1024x600. The driver is Intel NM10
I googles the topic and found many forums that guides throgh the xorg.conf file (had to create one) but with no luck.
monitor is a Optiquest Q19wb. I normally have is set on 1280x1024, but fedora will only go to 800x600. It has detected the monitor correctly. Not sure if being connected to KVM will cause issues. The xorg.conf does not exist. Have installed system-config-display but have not run yet.
View 1 Replies View RelatedI have tried this with many different configurations, however, I believe that the scroll bar that shows the progress of the boot is preventing it from changing successfully. I don't know how to switch it off. X is not installed. No gui, only tui.
View 5 Replies View RelatedCode:
Fedora 12
2.6.32.9-70.fc12.i686
GEFORCE GO 7400
When my notebook boots I get a high screen resolution. However, when I login it seems to go to a lower resolution that is not clear. I think this all started when I updated to a new kernel. So I reinstalled the nvida drivers using leigh's guide. However, I still can't seem to get it to display correctly.
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (mockbuild@) Sun Feb 28 14:49:02 EST 2010
# Xorg configuration created by livna-config-display
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection .....
I've recently been messing with installing Fedora 14 an older computer I have and I've hit a snag. While everything else seems to be just honky dory, I cant get the screen resolution to go higher than 848x480. I know that the screen I'm using supports at least 1024x768 (possibly higher, i don't know) as another computer I have will display at that on it with no problem.
I've spent literally hours mucking about with xrandr, and xorg.conf (had to create it cause it didn't exist)As an addendum: the GUI monitor preferences screen says "Unknown" for the monitor I'm using, where as the xorg.conf file i created accurately detects it as Vendor "NEC" ModelName "PX-50VP" That's not really a big deal though, just a minor quirk I would think.