I'm using Fedora 12, also to new to Linux, recently while booting Fedora I've got the below message on the screen and the computer was not responding. render error detectedEIR : 0x00000010[drm : i915_handle_error]
View 3 RepliesI think I have Bug #444372 which seems to be fixed and available. I have installed Ubuntu 9.10 l Linux 2.6.31-20generic #58-Ubuntu SPM Fri Mar 12 i686 GNU This was listed as fixed 2010-02-10 and Bug Watch Updater on 2010-03-02 Changed in linux:
status: Confirmed → Fix Released
I installed 9.10 by ISO DVD gotten from the Ubuntu website after 2010-03-02.I have installed all updates in the Update Manager today.The error output is still showing up in my syslog:
render error detected, EIR: 0x00000010
[drm:i915_handle_error] error EIR stuck: 0x00000010, masking
render error detected, EIR: 0x0000010
My system hangs frequently. The desktop looks normal and the mouse is alive but nothing on the desktop will respond. CTL ALT F2 does not respond. I'm not sure if this bug is related.My hardware is an emachine D2823 Celeron D 325 with 256MB. Not the best and I expect it to be slow but not hang forcing a plug pull.
Sometimes my screen-saver crashes, showing a blank screen with "render error detected ..." message.This message is displayed only short time <1s, then login screen appears.Due to short time, I'm not able to read the complete error message on screen. Is there a way to delay the displaying of such errors so I can read it properly?In the /var/log/messages I have found the following: Code: Jul 9 09:22:33 dc7100 kernel: render error detected, EIR:
0x00000010
Jul 9 09:22:33 dc7100 kernel: page table error
Jul 9 09:22:33 dc7100 kernel: PGTBL_ER: 0x00000010
[code]....
The message above occurred with GEdit running in background and while attempting to use yahoo mail in Iceweasel. System froze and I rebooted.
While Iceweasel has been the browser used the most since installing the system and has been the program in use during the freezes, Epiphany was also tested and was far less functional, with rendering failures occurring with nearly each modification of a page, though not all fatal. With Epiphany, re-rendering and reloading of a page was only accomplished by using my mouse wheel, other input methods left a gray, unusable screen.
My installation was complicated by the following factors and goals: dual-boot capability with the idea of loading another linux flavor such as Ubuntu onto a partition. retain 2 "legacy" ReiserFS data partitions used under Debian Etch. use 1 ReiserFS partition as /home
What suggestions do you all have on stopping these system freezes and errors?
Other possibly useful factors:
I chose "Expert" (graphical) install as it seemed the only way to enable dual-boot capability.
I loaded the ReiserFS compatibility modules during the system install.
I chose the "highlighted" kernel during the install out of 4 choices. The kernel I chose is Linux version 2.6.32-5-686 (Debian 2.6.32-31) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Tue Mar 8 21:36:00 UTC 2011 - however I cannot rule out the possibility that one of the other 3 kernels wouldn't have worked better.
I chose to enable the version of the system that had the most options for hardware compatibility instead of a more limited, smaller system customized to my hardware.
The default system settings for inactivity would log me off, as ppropriate. Because of a pattern of problems awakening from sleep mode, on 5/13 3am I changed the log off setting to never to avoid errors when the system should awaken. But still yet another freeze at on 5/13 at 22:49 while multiple windows were open.
i got a dual-boot. both are debian. yesterday i upgraded one of them to debian-squeeze and to grub2.that installations boots just fine.but for the second i get the error message from the thread title:"render error detected"after the grub-menu.if i choose single user mode it boots and hangs waiting for the root file system.i found this results at google (which i am not allowed to post yet) but i don't understand them.
View 8 Replies View Relatedfor some reason my first updating was interrupted and from then i cannot update. i get the following message:
rpmdb: PANIC: fatal region error detected; run recovery
error: db3 error(-30974) from dbenv->open: DB_RUNRECOVERY: Fatal error, run database recovery
error: cannot open Packages index using db3 - (-30974)
error: cannot open Packages database in /var/lib/rpm
CRITICAL:yum.main:
Error: rpmdb open failed
[root@laptop etc]# yum repolist
[Code]....
I am getting an error from yum update and Kpackagekit:
[root@asus-m4n82 tylerm]# yum update
Loaded plugins: refresh-packagekit
Setting up Update Process
rpmdb: page 18816: illegal page type or format
[code]....
How do I "run recovery"? Edit: Ok so it looks like I had som bad ram in my system that caused this - I found a site that told me to do this:
rm -f /var/lib/rpm/__db*
rpm rebuilddb
yum clean all
I did this but now when I try something like yum install firefox it pulls in a ton of already installed packages.
I'm tring to run AMDOverdriveCtrl, since they don't have an RPM file for Fedora i tried to compile from source i followed the instruction in the readme files run the make command
Code:
% make
g++ -mwindows -s -pthread -lwx_gtk2u_richtext-2.8 -lwx_gtk2u_aui-2.8 -lwx_gtk2u_xrc-2.8 -lwx_gtk2u_qa-2.8 -lwx_gtk2u_html-2.8 -lwx_gtk2u_adv-2.8 -lwx_gtk2u_core-2.8 -lwx_baseu_xml-2.8 -lwx_baseu_net-2.8 -lwx_baseu-2.8 -ldl -o./Release/AMDOverdriveCtrl ./src/CFanSpeedPanel.o ./src/COvdrSettingsPanel.o ./src/CFanControlPanel.o ./src/CColorTempPanel.o ./src/BezierMath.o ./src/Color.o
[code]....
and tried to run the application, and i get this error message
Code:
$ AMDOverdriveCtrl
Fatal Error: Mismatch between the program and library build versions detected.
The library used 2.8 (no debug,Unicode,compiler with C++ ABI 1002,wx containers,compatible with 2.4,compatible with 2.6), and your program used 2.8 (no debug,Unicode,compiler with C++ ABI 1002,wx containers,compatible with 2.6).
My goal is to import and organize photos from my SD Card I have a built in SD Card Reader on my Toshiba Satellite A205 with Fedora 12 installed
1st: I tried to just use gThumb but some of the images wouldn't render after import. - Also at this point, I selected for Fedora to automatically open gThumb Import when I enter the SD Card. Now I can't figure out how to stop it from doing that. If anyone could answer this too, i would be very grateful
2nd: I tried f-spot but it also wouldn't render some of the images after import and I don't like that it orders the photos by day and doesn't let you manage it yourself. Correct me if I'm wrong with this.
Now: I loved Picasa on Windows so I loaded the Picasa 3.0 RPM. I had an apparently common problem with the Wine preloader being blocked by SELinux. I followed the SELinux recommendation to lift the restriction. I realize its not as safe but I thought if I could get Picasa to work I could live with it. But I can't seem to import from Picasa either! When I start an import from Picasa it gets about 20 pictures though and then stops with the following error:
Code: An error has ocurred during importing. Either the source is unavailable or the destination is full or readonly. (11) And also the gThumb import window opens... actually as I'm writing this, it probably is the auto action i set up earlier that's throwing it off. That would probably make the "source unavailable" like the error implies.
I would like to remove the auto load behavior i set up when entering an sd card. If anyone has any other ideas why I can't view all of the images in the other programs i'd like to give them a fair evaluation also. A few of them render ok, but most of them just show a broken image link.
I'm using the ./livecd-iso-to-disk.sh script to create a bootable usb. Now in the arguments you're supposed to indicate a partition name. But my usb device gets auto-mounted to /media. And if I try to pass in /dev/sdb it gives me a "no media detected" message. What do?
View 3 Replies View Relatedi got an error this kernel requires an x86-64 CPU,but only detected an i686 CPU� while installing fedora12 in virtual machine..........
View 2 Replies View RelatedHi I am getting this error::
*** glibc detected *** ./a.out: free(): invalid next size (fast): 0x084ed538 ***
======= Backtrace: =========
/lib/libc.so.6[0x4df851]
[code]....
I'm having another issue when trying to install a particular software package.
I'm trying to install a CityEngine 2015.2 trial and when I run the setup script using ./Setup, I get the following error:
Code: Select all[CityEngine 2015.2 Setup Error]
libc6 not detected
I tried reinstalling libc6 to no avail and searching the net for answers but couldn't find any solutions.
I parsed the script for that exception and found the following code:
Code: Select allelif [ "x` which dpkg-query 2>/dev/null `x" != "xx" ]
then
DetectedLibcVersion=` dpkg-query -s libc6 2>/dev/null | grep ^Provides: | cut -f2 -d'-' `
if [ "x${DetectedLibcVersion}" = "x" ]
then
error_header
echo "libc6 not detected" >&2
exit 1
fi
I recently had a hard drive on a computer (not to be obvious), and I fried the computer. You may ask "well why did you do that?" well, simply because I had accidentally bumped and switched to 220 volts, rather than keeping it at 115 like a sane individual. Anyway, I got a new computer, swapped the hard drive. When I go to boot into ubuntu though, it gives me the following error:
Code:
Ubuntu is running in low-graphics mode
The following error was encountered. You may need to update your configuration to solve this.
(EE) No devices detected.
I also have XP on this hard drive, and it works almost better than it did on my old one, surprisingly. all i have to do now for it to be labeled as efficient, is to get some RAM. But anyway, what can I do about the error message? I tried booting into recovery, running dpkg from the list of options, and it did a couple of things.
I tried to install OpenSuse 11.3 on my brand new pc, which already had Windows 7 proffessional in it, and I went step by step through the installation without changing anything. It didn't work. I tried for a second time and this error message kept popping up: "Creating device modes with udev 2.0436224] [drm: i915_diver_load]*ERROR*Detected broken BIOS with 262140/2644kb of video memory stolen. 2.0436224] [drm: i915_diver_load]*ERROR*Disabling GEM(try reducing stolen memory or updating the BIOS to fix)"
And then a lot of letters and numbers wich make no sense to me. Now the only way I can initiate OpenSuse is with the OSuse boot dvd and on failsafe mode.
So everytime I resume Ubuntu from hibernation, it remains black for a time then 2 messages on the screen appear for about 10 seconds before I can log-in:
Code: [ 0.556247] [drm:init_ring_common] *ERROR* render ring head not reset to zero ctl 00000000 head 02001000 tail 00000000 start 02001000 [ 0.556320] [drm:init_ring_common] *ERROR* render ring head forced to zero ctl 00000000 head 00000000 tail 00000000 start 02001000
hey dude error in gnu c pointer
I am using Red Hat Enterprise Linux 5.0.
#include <stdio.h>
#include <stdlib.h>
int main()
{
char * cp = NULL;
[Code].....
I migrated to Debian sid, but since then I got this error everytime I launch Update Manager (whether it's in graphical mode or from a shell). Just after putting down my root password, I got this error:
Title of the window: (as superuser) A fatal error has been detected in update-manager. Do you want to submit a bug report? Selecting No will close the application. Whether I click Yes or No, nothing happens.
When I deleted uninstalling and installing some packages in Yast2 I got this output:
Deleting mc
Additional rpm output:
rpmdb: PANIC: Invalid argument
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30977) from dbcursor->c_put: DB_RUNRECOVERY: Fatal error, run database recovery
error: error(-30977) storing record "4.0-1" into Requireversion
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30977) from dbcursor->c_get: DB_RUNRECOVERY: Fatal error, run database recovery
error: error(-30977) setting "3.0.4-1" records from Requireversion index
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30977) from dbcursor->c_get: DB_RUNRECOVERY: Fatal error, run database recovery
error: error(-30977) setting "" records from Requireversion index
and on and on for 3 pages for every package.
Some files are generating in my Documents folder named hs_err_pid4214.log ........ different logs files are generated. I put the contents of one of them:
Code:
A fatal error has been detected by the Java Runtime Environment:
SIGSEGV (0xb) at pc=0x00007f1714b33e30, pid=4214, tid=139736470193920
JRE version: 6.0_24-b07
Java VM: Java HotSpot(TM) 64-Bit Server VM (19.1-b02 mixed mode linux-amd64 compressed oops)
Problematic frame:
C [libsvllx.so+0x82e30] _ZN26SvNumberFormatsSupplierObj18SetNumberFormatterEP17SvNumberFormatter+0x0
# If you would like to submit a bug report, please visit: [URL]. The crash happened outside the Java Virtual Machine in native code. See problematic frame for where to report the bug.
A fatal error has been detected by the Java Runtime Environment?
View 9 Replies View RelatedI am getting an error when i generat a report with squid's report generator ( sarg )is there a tool or way that i can find where in the log file the error is, the log file is 61442 lines, and it's gonna take me forever to find the error,
View 1 Replies View RelatedI am a web developer and fonts are crucial to my job.All i want is firefox to render the fonts just like if im on a windows machine, is this possible?For example i install tahoma and microsoft core fonts but in the FF they're not appearing right. This is a straggle to my work and believe me, i 've searched the entrire internet for a solution!
View 8 Replies View RelatedI installed Suse 11.3 a couple days ago. I have been using Ubuntu for the last 2 years and wanted to try something new. Everything has been working great so far except the widgets.
To add a widget, I click the icon on the right of the toolbar, click "Add Widget", and drag the widget to the desktop. When the widget appears it is stretched to the full width of the display and everything is scrunched vertically. A screenshot of the problem is below.
I just installed Ubuntu 11.04 with unity. Occasionally I will have text in firefox that doesn't render properly. It will have horizontal lines through it. I have attached an example of the problem I am having.
Is this a bug in 11.04?
I upgraded from 10.10 to 11.04Most things appear to work, however I can not use my terminalI can open the terminal (the standard terminal, as well as guake)however it will not render on the screen.It appears as an invisible window. I can type into the terminal area and the commands will process, but I can't see what im typing.Fspot is another window which will not render, however chromium and other programs open fine.I have changed my nvidia driver several times (the default one, nvidia's one and nouveau's manual compile), but this doesn't resolve the issue.Ive tried editing my grub conf file /etc/default/grub and un-commented GRUB_GFXMODE=1024X768
View 1 Replies View RelatedSome time ago I optimised my fonts following dugan's great tutorial. I mostly used Seamonkey to browse so I didn't notice the difference until today I ran Firefox. The font preferences seem to be identical, yet the fonts look differently on each browser. See the attachments (the browser on the left-hand side is Seamonkey)
View 2 Replies View RelatedI have just started to work on Ubuntu (Ubuntu 10.4 LTS) and I am having some problems to get a WUSB600N vers. 2 802.11n adapter working. I have followed the procedure described at [URL] . The compilation has been successful and I can see the kernel loaded an the module detected:
Code:
adrien@ubuntu:/$ lsmod | grep rt3572
rt3572sta 612272 1
adrien@ubuntu:/$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
The wireless adapter is detected by the system and it can scan the neighboring APs (cf. below with MAC address made unreadable):
Code:
adrien@ubuntu:/$ sudo iwlist ra0 scan
[sudo] password for adrien:
ra0 Scan completed :
Cell 01 - Address: --:--:--:--:--:--:--
Protocol:802.11g
[code]....
I love Ubuntu but there is just one thing that I cannot get working. I have vista on this computer (Which I am going to delete after I get this working) when this computer is booted into vista then I type "192.168.1.65" (which is this computers internal ip address) and it connects to it without a problem. When I try this on ubuntu with KRFB running I type "192.168.1.65:5900" as it tells me to do with the added port number. This computer (This is the one I am Connecting to says "The remote user has been authenticated and is now connected." and when I hover over the icon it says "Desktop sharing - Connected with 192.168.1.70" which is my laptops IP address. On my laptop however it says "Remote Desktop Disconnected Because of a protocol error detected at the client (code 0x1104), this session will be disconnected. Please try connecting to the remote computer again." No matter how many times I try it doesn't work.
View 6 Replies View RelatedWhen trying to render text with kino on amd64, I get:
Kino experienced a segmentation fault.
Dumping stack from the offending thread
Obtained 2 stack frames.
kino() [0x43bdb0]
/lib/x86_64-linux-gnu/libc.so.6(+0x321e0) [0x7f844b8401e0]
Done dumping - exiting.
I tried 'rm -rf ~/.kino-history' but this did not work.
I realized what I could have done wrong. I added deb-multimedia.org as a repository and installed mythtv and avidemux. I also did an update with aptitude and an upgrade with aptitude.