Debian Multimedia :: Can't Render Text With Kino
Feb 11, 2015
When trying to render text with kino on amd64, I get:
Kino experienced a segmentation fault.
Dumping stack from the offending thread
Obtained 2 stack frames.
kino() [0x43bdb0]
/lib/x86_64-linux-gnu/libc.so.6(+0x321e0) [0x7f844b8401e0]
Done dumping - exiting.
I tried 'rm -rf ~/.kino-history' but this did not work.
I realized what I could have done wrong. I added deb-multimedia.org as a repository and installed mythtv and avidemux. I also did an update with aptitude and an upgrade with aptitude.
View 1 Replies
ADVERTISEMENT
Jan 27, 2011
I use Kino to transfer dv from my camera and also use it for video editing, but there are very few GUI options when it comes to transcoding the edited files into, say, h264. Kino is using ffmpeg, and I know there are a plethora of options. For instance, here is the output of the logfile from a file I made with h264 and the best quality available in Kino.#options: 768x576 fps=25/1 cabac=0 ref=1 deblock=0:0:0 analyse=0x1:0 me=dia subme=8 psy_rd=1.0:0.0 mixed_ref=0 me_range=4 chroma_me=0 trellis=0 8x8dct=0 cqm=0 deadzone=21,11 chroma_qp_offset=-2 threads=2 nr=0 decimate=1 mbaff=0 bframes=0 keyint=300 keyint_min=25 scenecut=0(pre) rc=abr bitrate=2048 ratetol=2.0 qcomp=0.50 qpmin=2 qpmax=31 qpstep=3 ip_ratio=1.25 aq=1:1.00Frankly, I am not that impressed with the result, and would like to use settings that give a better result, e.g. adjusting bitrate and more passes
View 1 Replies
View Related
Oct 12, 2015
Why is the font rendered so small on this site? C++ Shell? Before having Debian Stretch as a dual boot, the fonts rendered much better in the VBox VM after installing infinality.
View 5 Replies
View Related
Feb 3, 2010
For some reason under Ubuntu 9.10 (x86 and x64), MetaPost refuses to render any images that contain text. If you open the file for Image.1, it opens evince and it hangs indefinitely. I can create images perfectly fine and render this as long as there is no text. Am I missing any specific font packages or something that I should be using? I know that it works under Windows. I also know that on a different machine I had a while back (running Ubuntu 8.04, I believe), I had it working then.
View 1 Replies
View Related
Nov 24, 2009
Does anybody know what has happened to Kino - the video capture utility? Used to be packaged by packman for Opensuse but doesn't seem to be available for 11.2.
Is there an alternative I can use for video capture - or has packman just not gotten around to adding this yet?
View 1 Replies
View Related
Aug 9, 2010
I'm getting dropped frames from both Digital8 & MiniDV camcorders using Kino. MyCPU doesn't seem to be spiking. I've made sure compiz is disabled and no memory/cpu hungry apps are running. I'm using SATA drives so DMA shouldn't be the issue.
The video and audio that is captured seems to be fine.
Hardware info:
CPU - AMD 64 FX-55 Processor
Mobo - GA-K8NXP-SLI
01:07.0 FireWire (IEEE 1394): Texas Instruments TSB12LV23 IEEE-1394 Controller
01:0a.0 FireWire (IEEE 1394): Texas Instruments TSB82AA2 IEEE-1394b Link Layer Controller (rev 01)
View 1 Replies
View Related
Feb 11, 2010
I recently migrated my system to Karmic 9.10 from Hardy 8.04 Now that I want to convert some .avi videos to H.264 in Kino for upload, it doesn't work. In Hardy all was fine, I'd import the .avi files and export to h.264 mp4, then upload to ..... etc ... no problems. But with karmic; after I import the file into Kino, I then trim out the bits I don't want. Next I go to Export and select H.264 MP4 Single Pass (ffmpeg), then click the Export button; it 'locks the audio' and that's it - takes 5 seconds to 'finish' no matter how long the video clip is, and no mp4 file is generated or appears in the selected folder (same result with H.264 MP4 Dual Pass).
View 9 Replies
View Related
Jul 10, 2010
I'm trying to capture video from my Sony DCR-HC21 video camera. I've managed to install Kino fine but was getting the error
aw 1394 kernel module not loaded or failure to read/write /dev/raw/1394
I could get it working by opening as root but then the files belong to root which I didn't want. So I did the following (as suggested in another thread:
chmod 777 /dev/raw1394
And now I get the error "No AV/C compliant cam connected or not switched on"
I've tried so many things ie [URL]
and as I'm a novice I'm reluctant to keep trying random things when I don't really know what its doing.
OK, it's back to the first error, is there anyway to run Kino and capture video without changing to root?
View 9 Replies
View Related
Feb 26, 2011
I'm trying to use Kino in Ubuntu Maverick Meerkat with a Canon ZR45MC Digital Video Camcorder. Kino is capturing the video, but not the audio.I have it connected by a DV Firewire. I've used it with Windows Movie Maker that way, and it worked fine.
View 6 Replies
View Related
Dec 1, 2010
I have made a video using PiTiVi, which worked fine to make it. But when it came to rendering it into a file I could use, the program just disappears from my screen. Here is the file: [URL]. How do I get it to work?
View 4 Replies
View Related
Jun 20, 2011
i've used ubuntu as main system from a few months to now and i'm finding my first big problem. I can use games and see movies without any problem, even using wine i can play wow at 40+ fps with medium/high options. Recently i've downloaded and instaled ogre and found that, if i try to render the sample modelit slows down. It says it is showing about 2kfps, but the model moves as if it was at 1 or 2 fps. By chance, i saw that if i open wow and then render the model of ogre, suddendly it goes smooth. Trying to find the problem, i went to the system test option of ubuntu11, when i arrieved glxgears test, it showed a really slow performance. Tried with wow opened and... magic!, it runs like hell XD. Then i tried calling glxgears from console, it says 9k+ fps, but again it went really slow! don't know whats happening.
[Code]...
View 3 Replies
View Related
Mar 20, 2010
Although I am an obsessed Ubuntu user, I am also a realist. When I have to give a presentation, I often have to use someone else's computer, and that system invariably runs windows. So when presenting via Powerpoint with embedded video on a default windows install, I need to be certain that the video format will play correctly. It is hard to convince windows users that Ubuntu is better if your videos/slides/documents etc don't play nice with their setups.
I have used kdenlive before (on OpenSuse) and it has a wmv export profile which works, but I was really hoping to sort this out using Ubuntu.
export settings or profiles in OpenShot that will definitely work for me??
I know that Openoffice Impress on Ubuntu plays every format I've ever tried flawlessly -- but when you give a talk somewhere you are often using someone else's computer and it is usually windows
View 1 Replies
View Related
May 4, 2011
I'm looking for a good video editor for after I make a video. I'm currently using gtk-record desktop, and I don't have a problem with that. It's when I use Pitivi that I actually can't edit the video or render it correctly. How to render the actual project. I'm using 10.04.
View 7 Replies
View Related
May 4, 2010
Actually I want to log a bug but I don't really know what package to log it against. The problem is that by default Pango is choosing the AR PL UMing CN as the font to render Japanese text when the current font doesn't have Japanese glyphs. But AR PL UMing CN is a Chinese font, so Chinese glyphs for kanji characters (e.g., 覚) are displayed. This is jarring and confusing for Japanese readers.
This situation mostly arises when you have mixed English and Japanese text. Some applications (for instance Firefox) will allow you to select a font for Asian text. Thus if the text contains only Asian characters it will use the font you select, rather than what Pango would have selected. But if it is a mix of English and Japanese, you end up with the wrong glyphs.
Other environments (like gnome-terminal, or a gedit) have difficulties as well. Since the primary interface requires mono spaced roman characters you run into difficulty selecting fonts. Most Japanese fonts only have proportional roman characters. This means that if use a nice roman font and use Japanese text (for instance file names), you end up with Chinese glyphs. What I want is a mechanism that will work across all of Gnome for selecting the font I want to use for Chinese characters. That way I can choose either Japanese or Chinese glyphs.
I realize this is low priority. It only bugs me a little, but many of my Japanese colleagues are put off from using Ubuntu because they are confused by the Chinese glyphs that pop up on my screen from time to time. As I said, I'd like to file a bug, but I'm not sure against what package...
View 2 Replies
View Related
Dec 3, 2010
1. Open Piviti2. Import Movies and still pics like jpegs3. Save4. Render ProjectAt this point, Render is greyed out. I can click on Modify or Chose FIle. So, I click on Choose FIle.5. Select any folder. At this point, nothing happens. I click on OK and nothing happens. I would file a bug, but I don't know where to file them at.
View 2 Replies
View Related
Sep 11, 2011
On my netbook I run crunchbang in tty (because X isn't supported) and it looks rather ugly. I have made it look fairly nice with the .bashrc but the text size is way too large. Is there anyone here that knows how to change it?Also I was wondering whether a png could be used as a tty background. Though I am possibly pushing the limitations of tty with that one lol.
View 1 Replies
View Related
Apr 2, 2011
I've Squeeze with a minimal XFCE 4 installed and looking for a simple text editor running under XFCE.
View 8 Replies
View Related
May 14, 2011
The message above occurred with GEdit running in background and while attempting to use yahoo mail in Iceweasel. System froze and I rebooted.
While Iceweasel has been the browser used the most since installing the system and has been the program in use during the freezes, Epiphany was also tested and was far less functional, with rendering failures occurring with nearly each modification of a page, though not all fatal. With Epiphany, re-rendering and reloading of a page was only accomplished by using my mouse wheel, other input methods left a gray, unusable screen.
My installation was complicated by the following factors and goals: dual-boot capability with the idea of loading another linux flavor such as Ubuntu onto a partition. retain 2 "legacy" ReiserFS data partitions used under Debian Etch. use 1 ReiserFS partition as /home
What suggestions do you all have on stopping these system freezes and errors?
Other possibly useful factors:
I chose "Expert" (graphical) install as it seemed the only way to enable dual-boot capability.
I loaded the ReiserFS compatibility modules during the system install.
I chose the "highlighted" kernel during the install out of 4 choices. The kernel I chose is Linux version 2.6.32-5-686 (Debian 2.6.32-31) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Tue Mar 8 21:36:00 UTC 2011 - however I cannot rule out the possibility that one of the other 3 kernels wouldn't have worked better.
I chose to enable the version of the system that had the most options for hardware compatibility instead of a more limited, smaller system customized to my hardware.
The default system settings for inactivity would log me off, as ppropriate. Because of a pattern of problems awakening from sleep mode, on 5/13 3am I changed the log off setting to never to avoid errors when the system should awaken. But still yet another freeze at on 5/13 at 22:49 while multiple windows were open.
View 1 Replies
View Related
Jan 27, 2015
I just installed a fresh install of Debian Wheezy to an old Pentium 4 desktop computer I found on Craigslist. Everything is mostly up and running but I've been encountering an odd issue with Firefox. Whenever I type text into either a search or text dialog on Youtube, Facebook or on Duck Duck Go the text is invisible. I can highlight the text to see what I have written, but obviously this is quite annoying not to be able to view what I am typing in these places in real-time. The strange thing is that it is only these sites that I have found, everywhere else (reddit, google, Debian forums as well) can see what I am typing. I'm using Firefox 35.0 right now.
View 7 Replies
View Related
Jul 11, 2015
I want to change the icon text color for my applications' launchers to white.
View 5 Replies
View Related
Jul 20, 2015
I use Scribus 1.4.4 without any changes from the Debian stable repository.
Each time when I edit text in the layout mode (not in the text editor) the program crashes with a "signal #11" message:
Code: Select all$ scribus
TIFFFetchNormalTag: Warning, Incompatible type for "RichTIFFIPTC"; tag ignored.
TIFFFetchNormalTag: Warning, Incompatible type for "RichTIFFIPTC"; tag ignored.
TIFFFetchNormalTag: Warning, Incompatible type for "RichTIFFIPTC"; tag ignored.
TIFFFetchNormalTag: Warning, Incompatible type for "RichTIFFIPTC"; tag ignored.
Scribus Crash
-------------
Scribus crashes due to Signal #11
Calling Emergency Save
Segmentation fault
On Wheezy I was using Scribus also, but without such problems. Unfortunately I often need to use the text editing in the layout mode in order to adjust the text flow for the final layout.
View 2 Replies
View Related
Aug 16, 2015
Dolphin showing .iso file as text wants to open in Kate or Kwrite. I reported this bug to Debian so they can get it fixed [URL]...
If you haven't done this fix, download the three iso files to see this problem in Debian 8 32bit: dban-2.3.0_i586.iso shows as normal in Dolphin. [URL]....
Modify:
/usr/share/mime/packages/freedesktop.org.xml
My freedesktop.org.xml before:
<sub-class-of type="application/x-raw-disk-image"/>
<alias type="application/x-iso9660-image"/>
[Code]....
View 3 Replies
View Related
Jul 31, 2010
I recently upgraded my squeeze in my job's PC. It went fine, but after a reboot if I press ctrl+alt+fX nothing happens. Keyboard works fine, I tested it in Openoffice.
View 2 Replies
View Related
Jan 24, 2011
I can't find a solution for not seeing any texts on html5 web pages. I haven't found any other report about such an odd behaviour on the web so far. Even on the new W3C web page (see the screenshot below for details) I can't see any texts. They are just invisible. I can mark and copy them, but there is nothing to see on Iceweasel 3.0.6 and Epiphany 2.22.3.
Because both browsers behave the same way I guess it's not a browser issue, but something more basic. My Debian Lenny stable should be unblemished because I've never used anything else than the main sources. I can't believe, that the W3C has switched to a new standard without propper fallback-support for older browser versions...
View 8 Replies
View Related
May 28, 2015
I would like to set the default text editor in Xfce to gedit. The only solution that I found on Google was to right click on a given text file, select 'open with other application', sleect gedit, and make sure that the "use as default kind" button is checked. Unfortunately this only works for text files with the same extension as the original file. Is there a way of setting every text file to open with gedit by default that doesn't involve repeating this exercise for every possible text file extension (.c, .py, .h, .hs, etc.)?
View 3 Replies
View Related
Dec 3, 2015
I have recently began to use libav and had an issue I was running into.. Not exactly how to word it so I will simply state the symptoms..
Goal: Create a screencast demo on linux, play it back on a windows machine.
I am running this command to record the screen, installed libav:
avconv -f x11grab -r 25 -s 1600x900 -i :0.0 -vcodec libx264 -threads 4 /home/sysadmin/Desktop/output.avi
The issue I am running into is, when I try to play this file in Windows Media Player or even VLC on the linux host, the default size of the video results in the text in the terminal to be unreadable..
When I re-size the video, as in blow it up to full screen, I can see the text clearly..
The playback device is running something like 1280x1020 resolution. Is there a way to make it so that the text will also be readable?
View 6 Replies
View Related
Feb 2, 2011
Any way to remove the background color from the icon text? The little color bubble that holds the icon text? Yes I know I am picky...
2011-02-01-203633_1280x800_scrot.png (6.88 KiB) Viewed 504 times
View 12 Replies
View Related
Jun 24, 2015
I've been having trouble with rendering issues in Gnome for the past few weeks, running Sid on x86_64, Occasionally Blue and Grey horizontal bars show up, they go away partially if I scroll up or down, and the bars disappear completely if the window is resized. Select characters/letters will also occasionally become garbled, if I change the font in Gnome Tweak Tool it seems to temporarily fix the issue though.
View 5 Replies
View Related
Sep 29, 2015
I use Scribus for designing leaflets and broshures. Unfortunately with the most recent version in the stable branch the program crashes each time I try to edit text in layout mode. I didn't have this problem in older versions. So I wonder if this is a bug others noticed in Scribus 1.4.4 on Debian GNU/Linux 8 (jessie) 32-bit.
For normal text editing I use the text edit mode anyway but when I try to fix line breaks it's always hard to not instantly see what I am doing. So even if I just want to insert a single character the program crashes with the following message: Scribus crashes due to Signal #11
View 3 Replies
View Related
Apr 29, 2010
After upgrading to gnome 2.28.2 and Nautilus 2.28.4, nautilus leaves text file(including .php .jave etc,.) icon blank while it works well with image and pdf files.
gnomevfs-info asd
Name : asd
Type : Regular
MIME type : application/octet-stream
Size : 27433
Not showing "Default app" but automatically opened by gedit. I am sorry but I don't really know what info matters. So tell me what info I should post here.
View 1 Replies
View Related
