I have Atheros AR8132 Ethernet 10/100 and downloaded the drivers but need to re-compile the src in order to install it. after doing step (make install) it says:-
Makefile:61: *** Linux Kernel source not found. Stop. What does this mean?
I am currently trying to compile mpeg4ip on F12 in order to do live broadcasts using Mp4live (a real-time encoding tool which mpeg4ip provides). The idea is to use mpeg4ip as broadcast software for Darwin Streaming Server which i am already running (v. 6.0.3 ) and streaming pre-recorded media. So i use the command
Code:
./bootstrap
which eventually tells me that
Code:
Mp4live encoder report:
ffmpeg encoder is installed
xvid encoder is installed
*** x264 encoder is not installed
[Code]....
I have the source of the application I want to modify, as well as the list of dependencies I need in order to compile. I got the source code for those and compiled/installed them. I'm fairly sure that all of the dependencies are installed. However, when I go to run the compiler it crashes while parsing some of the code.
I had the application installed before, and it ran. After tinkering around trying to get the source to compile, the app no longer runs either. It crashes, and if run from the CLI, spits out something about not finding one of the files from the SDL library.
So obviously I did something wrong to mess everything up, because I'm in a deeper hole than when I started. Anyone know how I would go about fixing this? Or even starting with a clean slate so that I can have another go at it?
I have made two source files named as sum.c and average.cI have included sum.c in average.c
both files in Documents directory.when i compile average.ot followingerror"average.c:4:22: fatal error: sum.c: No such file or directorycompilation terminated.How to solve this issue?I have tried to copy sum.c to usrinclude folder but unable to copy
I am trying to install ndiswrapper in Fedora in order to install a Windows wireless driver.
Code:
su -c 'yum install kmod-ndiswrapper'
, I get this:
Code:
Loaded plugins: langpacks, presto, refresh-packagekit
[Code]...
Rhythmbox crashed and my radio stations disappeared. I'm not sure if this bears any relation.
I have 2 PCs, one of them is updated with latest updates.
For sure the 2 PCs have the same OS Fedora 14. How to install or catch those updates in order for me to install them offline on the other PC ?
I have been playing around with linux for a bit ... but i am getting to the point where i would like to know what is actually happening to the system .
Scenario ... I would like to install Mozilla Thunderbird On mozilla thunderbird website, current version is 3.1
However, when i run 'yum search thunderbird' i get a version 3.0.5.xxx
Why is repository not up to date?
So is it better to install through YUM or should i download the source and compile it?
If i compile it, will the YUM keep track of it if an update is made?
If compiled, how can i get it so it appears in the menu system (alacarte?)
Is it possible to extract and install source files through YUM (so it can keep track of the package)?
I am very much a Newbie to Linux/Fedora. Just installed Fedora 10, but having some problems with hardware driver recognition, particularly a wireless network PCI card. ndiswrapper is looking for a kernel in usr/src/kernels, which doesn't exist.In Fedora, is it necessary to compile a kernel? Looking through the FAQ at kernelnewbies, states to extract the kernel to a Linux directory, in usr/src, which also doesn't exist.
View 12 Replies View RelatedI cant find a Kismet install in the .rpm format and I don't know how to compile it from a .tar.gz
View 12 Replies View RelatedI have installed vmware but it is asking for GCC 4.3.2
GNC C Compiler (gcc) Version 4.3.2
how do I download, compile and install it?
i'm learning some new stuff how to pack RPM so i need to know how to compile starting i install a fresh RHEL5 and want to install bind9 the latest from isc.org
View 1 Replies View RelatedI'm using a webhosting server running CentOS, and I'm trying to install GCC to compile Java on the server. Since I'm new to Linux and don't have root privileges, I'm having trouble installing this. I need to install this using command-line. I don't know if I should compile from source (which I downloaded off the "gcc.gnu.org" website) or if I need to install a binary or something. Can I even install anything without root privileges?
View 9 Replies View RelatedIve been using linux for a few months now and every now and again i come accross a program that doesnt have a rpm package but says that it can be installed on Fedora using source. I'm familiar with build essentials and the following commands:-
tar xzvf package.tar.gz
cd package
./configure
make
make install
but from what i have read fedora uses a differnet compiler. I'm trying to install Buddi budget manager and the ./configure command doesnt work, which im guessing is because it doesnt have a configure file? Can anyone confirm how to compile from source and whether there are any tutorials specific to fedora.
in my text file of 5 columns 2 column is in DDMMYYYY format. (ie DATE OF BIRTH). how to use sort command for its ascending order and descending order.
Is the same can be use for the date format YYYYMMDD ?
I'm runing FC11 and have compiled the vanilla kernel 2.6.33.4 to support Dazuko. It has broken my NFSD server in the process, and I can't figure out why. I get these errors on boot. FATAL: Module nfsd not found. FATAL: Error running install command for nfsd
[code]....
I have a laptop that has both Windows 7 and Ubuntu installed on it. I want to install Debian alongside the other two OS'es in order to experiment with it.
View 1 Replies View RelatedI am currently running Windows 7. I want to install the latest ubuntu (which I know I can just install right on top of &) but I also want to install FreeBSD and either Windows Server 2003 (maybe 2008 if i can get my hands on it). What would be the best way to go about installing these 3 OSes next to W7? I was also thinking about just upgrading my hard drive to a 2TB internal anyways, so waiting to get that is also an option, then installing everything in the "best" order. I also want to try installing Mac sometime too once I upgrade hardware.
View 2 Replies View RelatedI may be in the wrong section here (hardware) but I do believe this is a hardware issue. If indeed it is not, I welcome any admins to move this post to the correct section. That said, here's the issue:After years of frustration and problems with Windows XP, my parents finally asked me to install a Linux distro onto their machine. Taking their needs and lack of experience outside Windows in mind, I suggested Ubuntu and Linux Mint to them (as I do to pretty much anyone who wants an easy and beginner-friendly distro). Running first Mint's live session and then Ubuntu's on my own machine to give them an idea of how their new desktop would look, they picked Ubuntu and I grabbed the disk, my external hard drive, and proceeded to back up all their pics, music, docs, etc onto the external.
Once finished, I popped Ubuntu (10.04 LTS) into their machine for a reboot. Realizing when the Windows XP logo came up that the boot order is set to boot from the hard drive first, I went into BIOS and changed the boot order to check the appropriate DVD drive first (they have two DVD drives, both can and have burned onto DVDs without issue), and then the hard drive. Saving my changes and exiting, I did another reboot.I got as far as the splash screen where the dots under the Ubuntu logo lit up as normal, and then after a bit of a wait on my part, suddenly exits to a screen with a prompt telling me a boot device could not be found. Trying again with Linux Mint proved similar.Next I tried simply letting it boot into Windows as normal where I could then use Wubi to install Ubuntu beside Windows but again, the screen got as far as the Windows logo with the blue "loading bar" underneath and then would simply reboot. Having to focus my attention elsewhere for a couple minutes I found out upon return that the system was stuck in an endless loop of rebooting, asking to select between a safe mode, normal boot and last known configuration for Windows, then to the logo and starting over again.I went back into the BIOS and returned the settings to booting from the hard drive first as before (nothing else had been changed), and attempted another reboot. Same loop.I had made a boot "stick" for Ubuntu some time ago, and I've used it once when installing Ubuntu on a friend's laptop which had a broken CD drive. After it wouldn't boot from the USB device I looked in BIOS and selected "look for other devices to boot from" as there was not option to boot from USB in the standard option list (just hard drive, DC/DVD, and disabled). Still no luck.
Calling up my self-proclaimed computer expert uncle, he assured me that returning the BIOS to its default settings would allow it to boot normally back into Windows, probably after performing a disk check.Taking his advice I returned the BIOS to its default settings and reboot. No change, same loop! Frustrated I called him up again, and he said he'd have a look at it when he next gets a chance. heh. That may not be for a while as he is known for taking on projects he can't (or won't) finish.Anyway, tired and now uncertain, I thought perhaps it's something to do with a live disk. I tried an openSUSE installation disk and ended up with "please insert disk 1 into drive" prompt after selecting "install" from the first menu on the disk.
I'm using CentOS 5.5 64-bit. When I do "yum info mysql" or "yum info php" it doesn't list the latest version available. Is there a way for me to include more official repository in order to do the install via yum?
View 1 Replies View RelatedI'm running 11.2 with standard repositories (plus packman). I want to install a recent kernel and then compile some variations of it (to investigate a hardware problem).
So I took these steps:
(1) add the 11.2 Kernel:/HEAD repository
(2) enable multiversion in zypp.conf
(3) use YaST software management to select the kernel development pattern
Note that at the moment, the standard 11.2 kernel ( 2.6.31.14-0.6-desktop) is in use and I have not selected any packages from HEAD. But it has installed 2.6.37-41.1 versions of all the kernel packages I didn't already have (source & docs etc) instead of the 2.6.31 versions. /usr/src/linux symlinks to linux-2.6.37-41 instead of to a directory for the running kernel!
(1) it should have loaded the packages corresponding to the running kernel
(2) it's not supposed to switch repositories
I just moved from openSUSE 11.0 to 11.2.
While I like to new login screen (I was using a face based theme previously), I am stumped on how to control the order that the user names are presented.
As best I can tell, they are presented in the order who logs in most frequently. While that makes a certain amount of sense, I would like to be able to force the list to remain alphabetical.
Is there any way to control this, and if so, where?
I'm trying to change the boot order in grub (menu.lst) but does not working.
My menu.lst:
# Modified by YaST2. Last modification on Qua Jul 28 22:45:21 BRT 2010
# THIS FILE WILL BE PARTIALLY OVERWRITTEN by perl-Bootloader
# Configure custom boot parameters for updated kernels in /etc/sysconfig/bootloader
[Code].....
I'm wondering where the services order is read from during boot. For some reason the system trys to mount my NFS files BEFORE it starts networking. This results in log delays during the boot process.
View 3 Replies View RelatedI just gave my friend my laptop which has II on it. She wants W7 (have the disk) but how do I reformat my drive in order to do a clean install?
View 3 Replies View RelatedI'd like to install a JAR player in order to test JAR files before installing into my cell (a SonyEricsson w150a, a.k.a. Yizo). Ubuntu 10.10 Maverick.
View 7 Replies View Relatedhow do i format a hard drive in order to install linux,The following errors are displayed during installation:"VolGroup01" not found followed by could not find filesystem '/dev/root
View 2 Replies View RelatedI installed debian with minimal packages (without an any X components). Later I installed xserver-xorg-video-intel , xserver-xorg-input-mouse, xserver-xorg-input-kbd ... and other X components through apt-get. Created a Xorg.conf file.
On execution of X, I see black screen without cursor. What are the other minimal packages that I need to install in order to run any window-manager like openbox.. ?
I Currently have the problem of not being able to install xmms on suse 11.3, apparently since there's no way to install it from the packman repos because xmms claims it's missing glib 1.22 -oh yeah that one. But since it worked like a charm on 11.2 i'm just wondering if the glib, gtk, and gdk rpms will be present in the future or have i just missed something. I've tried to compile gtk 1.2 and above on 11.3 but since it is a 64bit system it do not comply with my request.Output from glib-1.2.2 and 1.2.10
Code:
checking host system type... Invalid configuration `x86_64-unknown-linux-gnu': machine `x86_64-unknown' not recognized
checking build system type... Invalid configuration `x86_64-unknown-linux-gnu': machine `x86_64-unknown' not recognized
and what's missing for xmms
[Code]...
If anyone could give me a tip on how to compile the old 32bit gtk libs on a brand new 64bit system would be much appreciated. Or if there is an even simpler way please tell i.e if there is any repos hosting what i need. Greets
I am trying to install the k10temp driver for sensors in order to get temps off my cpu. I found this but I dont know what to do with the makefile.
View 2 Replies View RelatedI've got a mate that wants to put windows 7 dual boot with osx on his mac book pro. I have talked him into putting Ubuntu on as well I just don't know how and in what order. So what is the best way to do it? Any good websites/tutorials?
View 2 Replies View Related