Red Hat / Fedora :: Install GCC To Compile Java On The Server Using Command Line
Feb 21, 2011
I'm using a webhosting server running CentOS, and I'm trying to install GCC to compile Java on the server. Since I'm new to Linux and don't have root privileges, I'm having trouble installing this. I need to install this using command-line. I don't know if I should compile from source (which I downloaded off the "gcc.gnu.org" website) or if I need to install a binary or something. Can I even install anything without root privileges?
I am going to compile and install my first linux application from the command line. The program is the port scanner program NMAP, and I am looking at the documentation to learn how to do it. I saw this thread [URL], and I just want to make sure I understand what it is I'm doing.
bzip2 -cd nmap-5.35DC1.tar.bz2 | tar xvf - cd nmap-5.35DC1 ./configure make su root make install
"bzip2 -cd nmap-5.35DC1.tar.bz2 | tar xvf -" Here I am calling the bzip2 program to work with a specified file. look for the file nmap-5.35DC1.tar.bz2 in the current diretory (-cd) and to pipe (redirect) something, this is where I get lost, I think. And I know what x & v mean but not f, or what that has to do with the previous commands.
cd nmap-5.35DC1 Chage to the named directory. ./configure I assume this is a command? make Builds an executable su root make install not sure what the difference is between this and the above.
I've got the "OpenCryptoKi" project source from "sourceforge.net" at here:But I don't know how should I compile and build it by "GCC" or "Make"?!I have ubuntu 9.04 and I've set the linux runlevel at 3, but I'm not so familiar with compiling such project at commandline environment of linux
I've just installed java (jre-6u21-linux-i586.bin) on Red Hat 4.4 AS and issued this command to check the java version: java -versionand got :bash :java: command not found
I have bound over the command line all for my work related jar files to my CLASSPATH and can now execute the command javac HelloRDFWorld.java and there comes noerror messages. I assume javac command can be executed without any problems:
I am trying to make a java application run on a barebone computer connected to a tv screen trough hdmi. I want to make this run as light as possible so gnome probably is overkill. currently I'm running fluxbox but I would like to encapsulate video and some other gui stuff in the program and run it command line(trough startup script.) Another way to do this would be running it when fluxbox starts in full screen. But I really don't know how to do this or where to edit the startup script so I can run it. I'm using ubuntu 10.04 server edition and only installed jre, fluxbox, and of course ssh-server.
i've gotten my fedora 12 to the point where i can run python3 scripts from command line and can call up python 2.6.2 idle with the command 'idle' from command line. what command will call up python3 (3.1.2 to be exact) idle?
Ive been using linux for a few months now and every now and again i come accross a program that doesnt have a rpm package but says that it can be installed on Fedora using source. I'm familiar with build essentials and the following commands:-
tar xzvf package.tar.gz cd package ./configure make make install
but from what i have read fedora uses a differnet compiler. I'm trying to install Buddi budget manager and the ./configure command doesnt work, which im guessing is because it doesnt have a configure file? Can anyone confirm how to compile from source and whether there are any tutorials specific to fedora.
below is what happens when i try to run a install from the command line in virt-install. keep in mind that this is a fresh fedora12 install selinux is disabled logged in as root. i have never had so many problems with something and it is maddening for there to be a thousand freaking how-to's on the subject all acting like it is so freaking simple.
For the analysis of wireless mobile nodes simulations, I have downloaded Jtrana from [URL] This is a java based project but I do not know what steps I am supposed to follow to use it for my trace analysis. In fact I know how to compile a .java file, but jtrana is a complete GUI software.So I want to know to how to install it under fedora.
I am attempting to write a very basic script that monitors a server's load and automatically emails an administrator upon the load reaching a certain threshold...
1.) `uptime | awk -F ' ' {'print $10'} | cut -d ',' -f1 | awk -F '.' {'print $1'}` -- the output from this command results in a decimal figure, so when that value is parsed and placed in an if statement, the value is not seen as a number. load-monitor.sh: line 9: [: 4.96: integer expression expected/How can I allow a number like "4.56" to be seen as an actual number within the if statement and be compared to 4, for instance?
2.) I am running a cPanel server on CentOS 5.4 -- when I run mail -s "SUBJECT" $EMAILADDRESS the command just hangs, and stracing the process shows it stuck on a read syscall.
3.) If I wanted to write this script in PHP, I have one primary confusion -- how can I mimic the functionality of obtaining the output from uptime via awk, etc. so that I can determine what the server load is at a given time? Which PHP function(s) would assist in that regard?
I'm runing FC11 and have compiled the vanilla kernel 2.6.33.4 to support Dazuko. It has broken my NFSD server in the process, and I can't figure out why. I get these errors on boot. FATAL: Module nfsd not found. FATAL: Error running install command for nfsd
from the commend line i went to compile the c program by giving the commend "gcc first.c -o first" but the commend line showing gcc is not found. iam using fedora 13 pls tell me what can i do to compile the program. the program i used to compile is below
I was having so much trouble with ubuntu 8.04 that I deleted off my computer and did a fresh install of 9.10. I downloaded the 64 bit iso from the internet, burned it to a disc and installed it. When it asked if it should be the server version I thought I said no. Now when I boot it only boots to the server version and all I get is command line. Can I get out of this and get my regular ubuntu screen back or did I install the wrong version?
Whilst I have used GUI-based Linux distros for the last few years, I am now struggling somewhat when it comes to setting up a server from the command line. All the howto's I've read so far tell you how to set up certain things, but I don't know what I actually need to set up.Rather than asking the same questions all over again on a forum like this, and generally being a bit of a noob, I wonder if there's a resource somewhere that someone could direct me to in order to know what I need to do to set up a fileserver.
The hardware is all done, and I will probably set up a router distro like IpCop to manage the network, but I'm rather lost as to what packages I need, and how to know what the server is/isn't doing.I've used plenty of command lines in the past (ms dos, amiga dos, BASIC programming etc), just not a linux command line. All I've ever done is mount a few drives, use nmap and started x
I was using Red Hat 7.3 forever and decided it was time for a change. I went to Fedora 10 but it was really buggy. CentOS 5.2 is VERY stable.Here is my problem.The server is command line only -- I tend to hate GUI"S.I setup Samba no problem disabling the ports needed through the firewall and that was straightforward.CUPS is a nightmare for me since CentOS locks down the cupsd.conf and then the firewall does its thing. I allowed port 631 through the firewall but then got lost on the cupsd.conf. It's been too long and the old redhat one won't work with CentOS (not surprising since it's a VERY old system) straight-forward CUPS tutorial for a command line interface. I just need it to be:
I am running SUSE 10.2 under z/VM 540 and have java working fine. I also have IBM EKM software running fine(if I execuute the script manually).I am trying to start this software automatically following the boot process. I have tried creating a member /etc/init.d/after.local but it does not seem to know where java is./etc/init.d/after.local: line 2: java: command not found"" After I login to any user I can get java -version to work, so my classpath is good.
LINUXEKM:/ # java -version java version "1.5.0" Java(TM) 2 Runtime Environment, Standard Edition (build pxz64dev-20091106a (SR11 ))
Java is installed in linux machine and when I enter the command java -version it shows java is not found.At the same time when i run from the folder where its installed with ./java -version it works.
first of all why its not working from any other place? also why do I need to give ./ from the folder?
Whenever I try and use php from the command line, I get this message:PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/imagick.so' - /usr/lib64/php/modules/imagick.so: cannot open shared object file: No such file or directory in Unknown on line 0The problem isn't the missing module, it is the warming message itself -- it is breaking scripts that rely on the output.I tried shutting off errors, changed my error reporting to:
