Ubuntu :: Compile Application From Source In Order To Modify?
Sep 1, 2011
I have the source of the application I want to modify, as well as the list of dependencies I need in order to compile. I got the source code for those and compiled/installed them. I'm fairly sure that all of the dependencies are installed. However, when I go to run the compiler it crashes while parsing some of the code.
I had the application installed before, and it ran. After tinkering around trying to get the source to compile, the app no longer runs either. It crashes, and if run from the CLI, spits out something about not finding one of the files from the SDL library.
So obviously I did something wrong to mess everything up, because I'm in a deeper hole than when I started. Anyone know how I would go about fixing this? Or even starting with a clean slate so that I can have another go at it?
Is there any open source virtual machine so i can study the source in order to create my own? i'm gonna write my own, so it doesNT matter if license does not allow further development of the code.
I am new to Linux Kernel. I want to disable branch prediction in kernel and recompile for my research purpose. Can anyone point me to clear instructions on where i can find the kernel config file in ubuntu and steps to recompile the updated kernel
I was saddled with the job of maintaining my department's website (I work at a college). When I still used windows I would access my department's folder on the web server using the following procedure: (in windows XP) go to the start menu > click 'run' > enter the folder address, I would be prompted for my login and password. The folder, and the whole server in fact, would then be visible in the windows file browser, under the 'networks' icon. I could then navigate to my department's folder and modify the files I need to to update the website.
How do I do this in Opensuse (using Gnome). I tried going to 'network' in nautilus and then 'open location' but no luck. I also tried 'connect to server' in nautilus (in the 'file' menu), but again no luck. which I could stomach if my college provided reliable access to computers on campus, but they don't so I have to use my laptop, which is now windows free . My current job is only going to last for a few more months, so having only so recently got rid of windows I am reluctant to re-install it just for this purpose (which is just about the only reason I currently have for using windows - the other is being able to download audiobooks from the public library, but that's another matter).
I recently installed a 64-bit version of centOS 5 alongside a 32-bit version, which I use. Turns out the 64-bit version absolutely will not boot and I'm stuck with it as my default boot option. Since the grub being used resides on the 64-bit half, I cant edit the menu file but I know theres a way to do this without it, through grub itself. I have about 29 render nodes now with this problem, and whenever they need to be rebooted I have to hook a monitor up to each one and hold its hand through the boot process. How to change the grub menu through grub itself, basically just change the default boot option and then have it stay that way?
i have just modify tcp.c file in/usr/src/linux/net/ ipv4 location.Now should i compile the complete kernel?if not then how to compile that net/ipv4 package or etc.
I have Atheros AR8132 Ethernet 10/100 and downloaded the drivers but need to re-compile the src in order to install it. after doing step (make install) it says:-
Makefile:61: *** Linux Kernel source not found. Stop. What does this mean?
I'd like to create a custom squeeze kernel. Is it a really bad idea to edit to edit the kernel config file directly instead of using "make config", "make menuconfig" or "make gconfig"? My problem is I missing a search function, for example in "make menuconfig" and cannot find some entries.
I am currently trying to compile mpeg4ip on F12 in order to do live broadcasts using Mp4live (a real-time encoding tool which mpeg4ip provides). The idea is to use mpeg4ip as broadcast software for Darwin Streaming Server which i am already running (v. 6.0.3 ) and streaming pre-recorded media. So i use the command
Code: ./bootstrap which eventually tells me that Code: Mp4live encoder report: ffmpeg encoder is installed xvid encoder is installed *** x264 encoder is not installed [Code]....
I read that xinetd listens on the service port and passes incoming traffic to the service (ftpd) via stdin. However, the ftpd source code reads its input from a socket not from stdin.
Am I to conclude that in order to be managed by xinetd, the source code for ftpd (or telnetd etc..) must be modified or recompiled to take its input from stdin??
I like to use Tilda in transparent mode. In Karmic I just added tilda to the startup applications and everything worked well. Now in Lucid, it starts up before Compiz and I don't get Compiz transparency. I have to quit Tilda and load it again before I get the transparency right. Is there some way to force tilda to start after Compiz? (I have tested this on several comps. it seems to hold true)
I have made two source files named as sum.c and average.cI have included sum.c in average.c both files in Documents directory.when i compile average.ot followingerror"average.c:4:22: fatal error: sum.c: No such file or directorycompilation terminated.How to solve this issue?I have tried to copy sum.c to usrinclude folder but unable to copy
I downloaded wine from a windows laptop, but because you have to have a computer running Linux to download it as a .deb package, I had to download the source code as a tar. bz2.
Does anyone know how I compile it and make it executable?
Wanted to switch to Kubuntu and decided a clean install was the way to go. Though the learning curve isn't too tough, I've hit a serious snag: When I try to compile a source package according to the similar instructions in each of the README files, I get the same error message;
Instructions:
mkdir build cd build cmake -DCMAKE_INSTALL_PREFIX=`kde4-config --prefix` .. make su -c 'make install'
[Code].....
I'm liking this KDE 4.4 setup, but if I can't install the improvements from kde-look.org
trying to install the latest version of Minitube on my 64 bit Ubuntu 10.04 installation. I thought adding a PPA would let me upgrade from version 0.9 to the latest version but it didn't seem to work. So now I'm trying to install from source (I've never done this before so I'm a complete noob when it comes to compiling). I checked the install instructions in the source which reads:
Code:
# Build instructions ## Prerequisites
To compile Minitube you need Qt >= 4.5 installed.On a Debian or Ubuntu system just type:
Windows and Mac users can get the Qt libraries from:
[URL]
Compiling on Linux is fairly easy. Just run:
qmake and then make
Beware of the Qt3 version of qmake! If things go wrong try running qmake-qt4 instead.
## Running
Just type:
./build/target/minitube
I installed the prerequisite packages,but just to be safe I wanted to run the ./configure command, but when I try to I get the "bash: ./configure: No such file or directory" message. Any idea what I'm doing wrong? Also, based on what I've read, I should have to enter some kind of install command in order to install the compiled binary but the instructions make no mention of this.
I often like to use packages that have to be compiled from source. However, even after downloading gcc, I can't compile anything, because the configure script gives me a message about being unable to execute C programs. I gather that this is because of a "noexec" option in /proc/self/mounts. Problem is that the file apparently cannot even be edited by root. Perhaps there is an alternate type of fedora distribution I could use?
How do you compile a tar.gz source on slackware?I am asking because I am about to download and install Slackware(x64), and I have some drivers that it may not have (Ubuntu didn't have them) and TrueCrypt source.
Has anyone successfully compiled VLC 1.0.0-rcX (rc1, rc2 or rc3) from source on CentOS 5? I have a binary installation of VLC 0.9 but I would like VLC 1.0 as it has a new codec that I'd like to use. I've tried lots of ideas which I can post - I keep getting build errors due to wrong package versions - but I thought I'd ask to see if anybody has a HOWTO first.
Recently I was trying to use Gentoo, and I was really impressed of how it is faster than Ubuntu in running applications, specially when I build wine and was able to run Oblivion at a reasonable speed. I would like to know if there is a way to compile Ubuntu from source code, to optimize it to my hardware.
I'm attempting to compile the latest version of VLC from source. I'm able to run ./configure without any errors, however when I try to make I receive the following error. I don't want to install the program from the repositories because it's outdated and the tray icon doesn't blend in.
I am trying to install a DR rootkit into ubuntu for an assignment, im using vm ware but can only get as far as extracting the rootkit and not being able to compile the source code.. when i use the ./configure command it says there is no such file or directory and when i use the make command it keeps getting errors.
I recently downloaded a source file from [URL] and wanted to compile it for fedora. I found that the source was written for ubuntu as all the instruction in README file was for ubuntu machine. Can I compile the source for fedora?