i finally get my server reformat and replace with redhat server v 5.5 ... [URL] and the same thing show in rkhunter log..
like this
"
[18:00:36] /sbin/ifdown [ Warning ]
[18:00:36] Warning: The command '/sbin/ifdown' has been replaced by a script: /sbin/ifdown: Bourne-Again shell script text executable
[18:00:36] /sbin/ifup [ Warning ]
[code]....
I have installed Fedora 11 and I have set it up as a web server with Apache. I have a domain name from GoDaddy that I own and I have set it to my web server. I am able to type the address into a browser on a computer outside of my network and it will pull up the web pages on the server. the problem that I am having is that after I type the URL, it gets replaced with the IP address. [URL] I know that I need a nameserver to resolve the IP address but I can not figure out how to do it. I have tried to use Bind but I can never seem to get it to work.
View 3 Replies View RelatedI use Fedora 13 (minimal installation), ISC DHCP server 4.1.1-P1. I'm running Fedora 13 too on a separate machine (minimal installation) with ISC DHCPclient 4.1.1-P1. My goal is to do some IPv6 testing. When I use the DHCP client manually (dhclient -6 -timeout 5 -d -v eth0), the client retrieves and installs a dynamically assigned IPv6 address.
Additionally, the client gets 1 DNS resolver address and 1 DNS search list. The resolver address and DNS search list always get written into /etc/resolv.conf. Perfect, exactly what I need. But when I do a "service network restart" or restart my system (which should trigger the same, as far as I understood), the DNS resolver addr and the search list get written into /etc/resolv.conf.save and the /etc/resolv.conf stays as before. How can I change this behavior? I don't need the .save file, I just want to have /etc/resolv.conf replaced by the latest DNS information.
I was using ubuntu 11.04 with a separate boot partition. Then i installed fedora 15 during which i erased(format) the /boot partition which holds the Grub2 entries for ubuntu. And its been replaced with the Grub's of Fedora. My Ubuntu installation is still intact sans the /boot folder. i tried copying the ubuntu vmlinuz and initrd into /boot (now belonging to fedora) and booted from grub - it throws me into initramfs , from which i dont know how to get into the lovely GUI of ubuntu .
[Code].....
where /sda1 is boot ; /sda7 is home ; /dev/sda10 having the [once] ubuntu installed files without /boot folder ; /dev/sda3 my fedora installation from where am typing this. Can i make a dual boot of ubuntu and fedora now without the need of reinstalling ubuntu again
Whenever I try and use php from the command line, I get this message:PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/imagick.so' - /usr/lib64/php/modules/imagick.so: cannot open shared object file: No such file or directory in Unknown on line 0The problem isn't the missing module, it is the warming message itself -- it is breaking scripts that rely on the output.I tried shutting off errors, changed my error reporting to:
error_reporting = E_ALL & ~E_NOTICE | E_CORE_WARNING | E_COMPILE_WARNING
And:
display_startup_errors = Off
Doesn't seem to matter though - it is almost like it isn't using the php.ini file at all
I have old app that by default is looking for /dev/dsp as an audio device. The source is configured as such and I want to change that so sound will work on current versions of Fedora.
What is the equivalent of /dev/dsp in F15 ?
I think /dev/dsp was the default generic sound device .. ?
I have execute following command and got the following warning.
[root@sina0012 /]# serviceconf
No display information -- gtk_init not called
Gtk-WARNING **: cannot open display:
rpm -ivh httpd-2.0.59-1.i386.rpm
warning: httpd-2.0.59-1.i386.rpm: Header V3 DSA signature: NOKEY, key ID 751d7f27
error: Failed dependencies:
libapr-0.so.0 is needed by httpd-2.0.59-1.i386
libaprutil-0.so.0 is needed by httpd-2.0.59-1.i386
[code]...
I just replaced the battery on my motherboard in an older computer that I was going to load Linux on. Before I replaced the battery, I booted up the computer and my old copy of win2k loaded up fine. Now that I have replaced the battery, the BIOS will not load the ROM from my PCI ATA adapters (one SIIG ATA 133 IDE controller, and one Promise ATA 133 IDE controller) which are hooked to my hard drives that I boot from (software raid 1) and the CDROM drive in the system (along with some other hard drives for storage). I removed the adapters and stuck them in another computer to check them. They both loaded their ROM's into the BIOS of the other computer. So the cards are fine. The computer has an award BIOS. I have checked all of the settings and reset the CMOS again, but it will not load the ROMs from the PCI controllers into the BIOS on boot.
View 14 Replies View RelatedMay I know what is wrong in the following TAR command? It works, but generate a warning...
> tar -cpzvf /etc/a000/backup.tar.gz /etc/r000
tar: Removing leading `/' from member names
I have installed ubuntu Server 9.10 [ubuntu-9.10-server-i386]in ma machine. After giving the command startx i couldnt goto gui . It saying x session : warning: x rdb command not found resource not merged.
View 1 Replies View RelatedI am trying to insall CPAN, apparently I do this by typing CPAN at the command line.After much else, this results in
Code:
**UNRECOVERABLE ERROR**
Could not find gdlib-config in the search path. Please install libgd 2.0.28 or higher.
If you want to try to compile anyway, please rerun this script with the option --ignore_missing_gd.
Warning: No success on command[/usr/bin/perl Makefile.PL INSTALLDIRS=site]
[code]....
i just tried to install Ubuntu Netbook 10.04 on my old Amilo Lifebook P Series. But after the boot screen and the choice to install Ubuntu i get stuck at the Ubuntu screen with the little dots on the bottom If I hit esc i can see the warning (process 257): GLib-WARNING **: getpwuid_(r) failed due to unknown user id (0)
View 2 Replies View RelatedI've got a font issue on my system: The normal arial is missing from my system and all software substitutes it with arial-black. It's a system wide problem:Firefox, konqueror and chrome all render Arial texts as Arial-blackOpenOffice and GIMP only display "arial black" in font selection, not arialInkscape displays bot arial and "arial black", but they're the same font.I tried reinstalling liberation-sans-fonts package and even rebooted, but the problem remains. I checked my fontconfig configuration, but nothing seems to be wrong.I believe the problem first occured after I uninstalled VirtualBox (proprietary edition). But I'm not sure.
View 3 Replies View RelatedI am trying to make wine work for explorer. I followed some instructions on this link [URL] To follow this link, I am supposed to
cd ~/ies4linux/ie6
cp user.reg ~/user.reg.old
gedit user.reg
1st and 2nd line went well 3rd line when I try to execute the command gedit user.reg (gedit:2573): Gtk-WARNING ** cannot open display I then /ies4linux/ie6# ls dosdevices(in blue) drive_c(in blue) system.reg(in white) userdef.reg(in green) user.reg
I just installed Fedora 11, and am now running a Yum Update. It has run for a while, but now I have this message:
warning: rpmts_HdrFromFdno: Header V3 RSA/SHA256 signature: NOKEY, key ID d22e77f2
updates/gpgkey | 1.6 kB 00:00
Importing GPG key 0xD22E77F2 "Fedora (11) <fedora@fedoraproject.org>" from /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-i386
Is this ok [y/N]:
Do I say yes or no to this? I don't know what it is.
For the last week or so, I've been getting the following warning whenever I do an update. Is it expected, or should it be bugged?
Code:
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
Warning: RPMDB has been altered since the last yum transaction.
Updating : pulseaudio-libs-0.9.21-1.fc12.x86_64 1/53
dd_wizard
Fedora 13 (2.6.33.6-147.2.4.fc13.i686)
Every time I use YUM from the CLI the following message shows up: Code: Warning: RPMDB altered outside of yum. ** Found 1 pre-existing rpmdb problem(s), 'yum check' output follows: wine-common-1.2.0-1.fc13.noarch has missing requires of wine-core = ('0', '1.2.0', '1.fc13') What is this? How to deal with it?
So I booted up lucid lynx this morning and all the text is replaced with rectangles.This is true for the login screen and any applications I can get to open (Some such as Chrome and Firefox will not launch).If I boot into recovery mode and enter the command line, text works as normal.I found some suggestions to run "sudo fc-cache -f -v" which did not fix the issue and one suggestion to edit xorg.conf in a particular way, but since xorg.conf doesn't exist in lucid lynx, that was a no go.I did get a couple of screen shots:
View 3 Replies View RelatedFinal update: No matter what has been tried throughout this thread, the gnome foot icon refuses to budge, so: I give up.I'll update this again IF the creator of the icons ever responds to me..Yet still the icon (gnome foot) remains, and i can't figure out why.
View 9 Replies View RelatedAn Acer Ferrari 4005wlmi laptop has the following CD/DVD IDE drive with a thickness of about 13 mm:
[URL]
Can this be replaced by an IDE 2.5'' HDD?
If an adaptor of some kind is required, where do I get one?
Details of the rest of the system: [URL]
I have a problem with Fedora Red Hat (2.6.23.17), every time I restart the server, the eth configuration is deleted and replaced by a new one. For example, my configuration:
eth0 --> static ip address
I restart the server, then eth0 file is deleted and replaced by eth1 with default configuration. I try to create an eth0 and give it the static ip, I stop the network I get at the end: SIOCGIFFLAGS: No such device
But when I start it back I get: bringing up interface eth0: Device eth0 does not seem to be present, delaying initialization. However, if I configured the static ip to eht1 it will work perfectly. But I still get "SIOCGIFFLAGS: No such device" when I stop it.
OK I Have a server half way around the world and I've got a problem (hopefully small), I had to have my main drive replaced and now I need to recover the LVM so I can access the other 2 hard drives with all the data on them. The problem is these drives used LVM and encription on them. Also the mysql partition was removed (also on the failed drive)
The setup is as follows 40GB SSD (this drive was replaced) 2X 500GB SATA These drives are encrypted and used raid and LVM But im really unsure how to get to the data/set it back up like it was before. Now before the hard drive was replaced I was smart enough to create a image of the drive with dd. Il try to list a few things I think are important Firstly this is what I used to start the drives up with the old drive.
[Code]...
What linux is the best use that i can replace to Microsoft Windows that suitable to school and college. that all program used in windows base will work like Visual Basic, Pascal program, Photoshop and many more
View 12 Replies View RelatedI've always used SSH to get to my Linux server and decided to figure out VNC. I've got VNC installed just fine and was logged, then I click Exit on the VNC screen and all hell broke loose. So I'm left with a gray useless screen, so I though I would kill the process. Did a ps -aux | grep vnc and saw what is running Then did a vncserver -kill :1 and vncserver -kill :2 Then typed vncserver
Now I'm getting Warning: blahblahblah:1 is taken because of /tmp/.X1-lock Remove this file if there is no X server blahblahblah:1 Warning: blahblahblah:2 is taken because of /tmp/.X2-lock Remove this file if there is no X server blahblahblah:2 So per the man pages I need to go here $HOME/.vnc and kill something. So How do I get to $HOME/.vnc? Is this a hidden location? I'm thinking I need to do a kill -9 .X1-lock per the above Warning message but where is that?
Since upgrading last week we keep getting a red icon warning msg for the ABRT system - it's not really something we want to have activated - is there any way to turn it off ?
View 3 Replies View RelatedI'm experiencing a problem with cron.hourly running mcelog.cron on Fedora 11:Quote:mcelog: warning: 18446744073709551600 bytes ignored in each recordmcelog: consider an updateI've read a dead end email thread here from February 2010 describing what I am seeing on Fedora here:Does anyone have any insight into this problem? This is relevant portion of strace(1)ing mcelog which shows /dev/mcelog is open()d and configured correctly:Quote:
open("/dev/mcelog", O_RDONLY) = 3
ioctl(3, MTRRIOC_SET_ENTRY, 0x7fff13129bac) = 0
ioctl(3, MTRRIOC_DEL_ENTRY, 0x7fff13129ba8) = 0
[code]...
I have a problem with the 'yum update':
Code:
Warning in file "/usr/share/applications/gnome-nautilus-folder-handler.desktop": usage of MIME type "x-directory/gnome-default-handler" is discouraged ("x-directory" is an old media type that should be replaced with a modern equivalent)
Warning in file "/usr/share/applications/gnome-nautilus-folder-handler.desktop": usage of MIME type "x-directory/normal" is discouraged ("x-directory" is an old media type that should be replaced with a modern equivalent).
And I also got this warning when installing VLC.
I had occasion to add a few lines to rc.sysinit. Turns out the lines syntax was wrong. Instead of the booting ignoring those lines and proceeding on, then giving me an error warning or perhaps dumping into the interactive mode it just hung up! After several tries at moving on I discovered ESC dropped me into some sort of unannounced shell I got the installation disk out and with the repair system option using VI I got the lines deleted and all went back to normal. Now my suggestion is that if something does not make sense in terms of syntax while booting then cover it by doing the above and ignoring it with a warning later.
View 14 Replies View RelatedI have a new (few months) HP Compaq laptop where I run Fedora 13. A couple weeks ago, it started complaining about too many bad sectors in the HD. What I have done is to remove palimpsest from load-on-start list, so I don't get the annoying message. I know the palimpsest Disk Utility has given problems like this (false positives) in Ubuntu, and F11. So my concerns are:
Is it normal in F13 to get those palimpsest warnings? Or should I consider the idea that my new HD is really failing? If this is a bug in palimpsest, is it going to be fixed soon?