Fedora Servers :: DNS For Web Server - Gets Replaced With The IP Address

Sep 26, 2009

I have installed Fedora 11 and I have set it up as a web server with Apache. I have a domain name from GoDaddy that I own and I have set it to my web server. I am able to type the address into a browser on a computer outside of my network and it will pull up the web pages on the server. the problem that I am having is that after I type the URL, it gets replaced with the IP address. [URL] I know that I need a nameserver to resolve the IP address but I can not figure out how to do it. I have tried to use Bind but I can never seem to get it to work.

View 3 Replies


ADVERTISEMENT

Fedora Servers :: Dig Command With IPv6 Address As Server

Mar 2, 2009

I am trying to get the MX record using dig command supplying IPv6 address of host. but i am getting connection timed out .

while with IPv4 address and host-name its working fine.

View 1 Replies View Related

Ubuntu Servers :: NAS Device OS Be Replaced With LXDE Distro

May 8, 2011

Is there a recommended NAS device (preferably only an enclosure which I can change the SATA HDs) in the market that the OS used in the NAS device can be changed by installing either Lubuntu or Mint LXDE?These are the things I am looking for with the NAS device

> Accessible using Linux, Windows and OSX
> Low powered and power saving as it will be open 24/7 plugged into a UPS
> Has to have all of these programs: Dropbox, XChat, Chromium, JDownloader, utorrent (through Wine), VNC, TeamViewer, FreeNX

[code]....

I have something similar going on with my relatively old (it's core 2 duo I think) monitor-busted laptop for around a year now. But the discspace of that is only 160GB and it's somewhat a pain to always migrate the files. I'm also thinking it would be good storage of lots of big pictures as my brother is a hobbyist turned professional photographer and I am an apprentice of his. It will also be stored with lots of videos and sound files that can be accessed at least through the network.

I'm thinking of at least having it 2TB but there currently are two problems with the current laptop namely: the USB plug of the laptop has serious problems that it disconnects the USB2 randomly then makes it USB1 speed. Secondly, it has bad heat management that it shut downs randomly without a word (or so I think it's because of that it shuts down).

As much as I would like to build from the junk of old computers we don't use, I don't think I have the time recently to make my own NAS and experiment (and even though I'm excited in learning and setting up RAID - I don't think I have that luxury of a time at the moment).

I've been reading last night of devices like Buffalo Link Station and such but most if not all of them have their own preinstalled OS and Google searches doesn't stumble me to an. What I want actually is install Mint LXDE or Lubuntu as I prefer that it has the features and programs I'm currently using right now with the 160GB network storage.

Is there a NAS device in the market I can install Lubuntu or Mint LXDE (yeah, I think LXDE will be the best environment for the things I will do for it)? Or is it still better that I make some time and build my own NAS? Please advice *bows deeply*

PS: I've been checking for NAS devices available at a tipidpc.com (a very big local tech selling community) and found these:

Linksys Cisco NAS 200 dual SATA bay - [URL]
Buffalo Link Station Duo LS-WXL/E - [URL]
EtrayZ 2-bay [URL]

Do any of the abovementioned devices can be installed with Linux LXDE distro?

View 3 Replies View Related

Ubuntu Servers :: Replaced DVDRW Drive Not Reading Disks?

Feb 25, 2010

I just replaced a DVD-RAM drive in one HP server, The drive is recognized by the OS:

Code:
# lshw -class disk
*-cdrom UNCLAIMED
description: SCSI CD-ROM
product: DVDRAM GSA-T50L

[Code]...

Is there anything I should do when replacing a drive? Didnt think so, but this is going nowhere.

View 3 Replies View Related

Ubuntu Servers :: Apache Use Server Name Instead Of IP Address

Feb 25, 2010

I've setup a Ubuntu 9.10 LAMP server to host a word press blog on an intranet. I've got everything working except the url for the site.The IP address of the server will take me to the site URL.../But I'd rather use the server's name instead of the IP address URL...When i try to go to URL... in Firefox or IE it give me a server not found page and changes the URL to URL...I also have Webmin installed on the server and I've been playing around with the Apache module and can't figure out how to set it so i can use the server name instead of the IP address to get to the site.

View 6 Replies View Related

Ubuntu Servers :: Active Ip Address For Server?

May 8, 2010

I installed LAMP server at my debian lenny. people can't view my webpage via my ip address. How to active my ip address?

View 4 Replies View Related

CentOS 5 Server :: A New Service Appears After The Entire Server Was Replaced

Mar 29, 2010

I noticed that my VPS was rebooted recently and a new service appears

[root@localhost ~]# pstree
init─┬─brcm_iscsiuio───2*[{brcm_iscsiuio}]

View 3 Replies View Related

Ubuntu Servers :: Server Inet Address Change Everyday

Mar 17, 2010

I'm using comcast, and I setup my server, everything works fine.But later I found out that the server inet address is changing everyday, and it makes my server almost not accessible.Is there anyway to fix that problem??

View 5 Replies View Related

Ubuntu Servers :: Can't Access Apache - Any Server Over My Primary Ip Address / Do That?

May 17, 2010

I have no idea what is going on here and this is the second time it has done this but. I just installed Lucid Lynx Desktop Edition for my Server. I have installed apache php5 mysql binarys. I have 3 ips on the machine 10.0.1.30, 10.0.1.37, 10.0.1.38. .30 is the main ip 10/100 the rest are 10,100,1000 ports. I can only access Apache 2.2 over .37 or .38 but not .30

I have not used Ubuntu alot but I am starting to and this really pisses me off since all my computer have aliases to the machine through .30

View 5 Replies View Related

Ubuntu Servers :: Set The Server To Hold The Domain From A Dynamic Ip Address?

Sep 25, 2010

I have 4 servers that I got at auction and they now have ubuntu running with gnome interface.I installed apache2 and tried to edit the conf file but i am not sure if it is a router issue a dns or the config.I am trying to figure out how to set the server to hold the domain from a dynamic ip address and also how to create some test page to see if i can acess from the internet.

I have purchased some books on the command lines and how ubuntu works, I am understanding it so far, but dont know how to have a directory for the dns request to point to for the sitewhat i want to do with the servers...voipeb server for about 4 websites - one is for a volunteer rescue organization, another for a test auction site and 2 portfolio sitesremote file access- if possiblealso on a side note, is it possible to have a message relay from one cell phone or transmit to the server and have it send sms message to cell phones? - this will be used for the rescue group as well.

View 3 Replies View Related

Ubuntu Servers :: Address Book Sharing In Outlook Via Server

Nov 6, 2010

Is there a way to synchronize the address book in Outlook when the user works on multiple windows computer, and the server in the internal network runs under Linux ?

View 1 Replies View Related

Ubuntu Servers :: Remote Desktop Connection - Cannot Seem To Connect To Any Windows Server Via IP Address

May 5, 2011

I have a problem with my Terminal Server Client, I cannot seem to connect to any windows server via IP address. Can anyone please recommend any tool I could use to connect? I need to work on the server for admin interfaces example Admin Kits for workspace protection

View 9 Replies View Related

General :: What Is Production IP Address And Management IP Address In Servers

Jul 20, 2011

what is Production IP address and Management IP address in Linux servers? What is the significance of these two? When to use what?

View 3 Replies View Related

Fedora Servers :: Cannot Assign IP Address To Eth0

Feb 17, 2009

Just Installed Fedora 10 on Dell PowerEdge 2950. Installation went fine. Problem is I cannot Assign a Ip address to eth0. Service "NetworkManager " dies on its own "ifconfig eth0 192168.0.8/24" works though.

View 6 Replies View Related

Fedora Servers :: Starting HTTPD98 - Address Already In Use

Mar 26, 2009

I start httpd but status shows: httpd dead but subsystem locked

get another message: starting httpd98) address already in use: make _sock: could not bind to address [::]:80

bottom line is I can load the Apache web page.

View 2 Replies View Related

Fedora Servers :: Can't Browse Applications Using Ip Address

Apr 6, 2009

I just setup an application (phpcollab) on a linux machine, I was able to browse the app using localhost, but each time i try browsing it using the ip address, a blank page loads with a message saying "No input specified".

Whenever I try browsing the app from other systems on the network, I get a page cannot be found error message even though the other machines are successfully pinging the linux machine's ip address.

I need to browse it with the ip address because the app is to be accessed from other machines on the network.

View 3 Replies View Related

Ubuntu Servers :: Setup Access Properly From A Public Address To A Monitoring Server That Works Fine Locally?

Apr 19, 2011

I've spent days trying to setup access properly from a public address to a monitoring server that works fine locally. Everything works from public access until I try to link to a CVS repository. The rancid CVS repository is set up as a separate server (virtualhost). It appears the referring link causes a DNS error (105: Server Not Found) when the CVS repository server is accessed from the public address. Things work fine when accessing via localhost.

Localhost link:

[URL]

Public link: (this results in 105 error caused by redirection (bold portion of link))

[URL]

Code:

Virtualhost config:
LoadModule jk_module /usr/lib/apache2/modules/mod_jk.so
JkWorkersFile /etc/apache2/workers.properties
JkLogFile /var/log/apache2/mod_jk.log

[code]....

View 2 Replies View Related

Fedora Servers :: Email Sender Address - Postfix / Dovecot Etc

May 21, 2009

I have an email server configured with postfix, dovecot, saslauthd and squirrelmail. It works great. In fact I'd even say it works too well: in squirrelmail, I can configure any sender address and my server will accept it. Message will be sent, wether the sender's address is [URL] or [URL]. Is there any way of limiting it in such way that only [URL] is accepted as sender's address?

View 6 Replies View Related

Fedora Servers :: HTTPD Service Does Not Start - Could Not Bind To Address

Nov 17, 2010

I have one problem regarding my web server. When I am try to restart my httpd service it shows...

[root@localhost ~]# service httpd restart
Stopping httpd: [FAILED]
Starting httpd: (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs [FAILED]
[root@localhost ~]#

View 2 Replies View Related

Red Hat / Fedora :: Install Cluster On Servers - Validate A Multicast Address Before Using It?

May 19, 2011

I am trying to install a Red Hat cluster on my servers. In order to configure an heart bit between the servers I must give a valid multicast address. I wanted to know if there is a way to validate a multicast address before using it. For example if it is already in use i don't want to use it.

I read a little about it and there is a Perl module called IO::Socket::Multicast: [URL] There is a tool called mcasttrest.pl: [URL] Oracle use it to test multicast. But I am not sure what will do the trick in Red Hat cluster.

View 1 Replies View Related

Fedora Servers :: OpenVPN - Socket Bind Failed On Local Address

May 4, 2011

I finally got the certs to configure:
openvpn --config server.conf
Tue May 3 17:26:27 2011 OpenVPN 2.1.1 i686-redhat-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Jan 5 2010
Tue May 3 17:26:27 2011 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Tue May 3 17:26:27 2011 Diffie-Hellman initialized with 1024 bit key
Tue May 3 17:26:27 2011 TLS-Auth MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
Tue May 3 17:26:27 2011 ROUTE default_gateway=192.168.122.1
Tue May 3 17:26:27 2011 TUN/TAP device tun0 opened
Tue May 3 17:26:27 2011 TUN/TAP TX queue length set to 100
Tue May 3 17:26:27 2011 /sbin/ip link set dev tun0 up mtu 1500
Tue May 3 17:26:27 2011 /sbin/ip addr add dev tun0 local 10.8.0.1 peer 10.8.0.2
Tue May 3 17:26:27 2011 /sbin/ip route add 10.8.0.0/24 via 10.8.0.2
Tue May 3 17:26:27 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
Tue May 3 17:26:27 2011 Socket Buffers: R=[114688->131072] S=[114688->131072]
Tue May 3 17:26:27 2011 UDPv4 link local (bound): [undef]:1194
Tue May 3 17:26:27 2011 UDPv4 link remote: [undef]
Tue May 3 17:26:27 2011 MULTI: multi_init called, r=256 v=256
Tue May 3 17:26:27 2011 IFCONFIG POOL: base=10.8.0.4 size=62
Tue May 3 17:26:27 2011 IFCONFIG POOL LIST
Tue May 3 17:26:27 2011 Initialization Sequence Completed

But openvpn still won't start; where to go from here.
Tue May 3 17:54:25 2011 TCP/UDP: Socket bind failed on local address 192.168.122.3:1194: Address already in use
Tue May 3 17:54:25 2011 Exiting

View 3 Replies View Related

Fedora Servers :: Configure Email Address Alias Using Regular Expression In Postfix?

Mar 8, 2010

I am trying to configure virtual alias using regular expression.

For example :

Email send to user.1@example.com and user.2@example.com will deliver to user mailbox.

Email send to user2.1@example.com and user2.2@example.com will deliver to user2 mailbox.

And the numbers or alphabet in between user name and the domain will be vary , I can't just do a normal alias.

I been try to play around with main.cf and the virtual alias table but still not able to get work. So I am not sure is the main.cf didnt configure correctly or the regular expression is not working.

View 3 Replies View Related

Fedora Networking :: Resolv.conf Not Replaced

Nov 1, 2010

I use Fedora 13 (minimal installation), ISC DHCP server 4.1.1-P1. I'm running Fedora 13 too on a separate machine (minimal installation) with ISC DHCPclient 4.1.1-P1. My goal is to do some IPv6 testing. When I use the DHCP client manually (dhclient -6 -timeout 5 -d -v eth0), the client retrieves and installs a dynamically assigned IPv6 address.

Additionally, the client gets 1 DNS resolver address and 1 DNS search list. The resolver address and DNS search list always get written into /etc/resolv.conf. Perfect, exactly what I need. But when I do a "service network restart" or restart my system (which should trigger the same, as far as I understood), the DNS resolver addr and the search list get written into /etc/resolv.conf.save and the /etc/resolv.conf stays as before. How can I change this behavior? I don't need the .save file, I just want to have /etc/resolv.conf replaced by the latest DNS information.

View 2 Replies View Related

Ubuntu Installation :: Replaced With The Grub's Of Fedora

Jun 26, 2011

I was using ubuntu 11.04 with a separate boot partition. Then i installed fedora 15 during which i erased(format) the /boot partition which holds the Grub2 entries for ubuntu. And its been replaced with the Grub's of Fedora. My Ubuntu installation is still intact sans the /boot folder. i tried copying the ubuntu vmlinuz and initrd into /boot (now belonging to fedora) and booted from grub - it throws me into initramfs , from which i dont know how to get into the lovely GUI of ubuntu .

[Code].....

where /sda1 is boot ; /sda7 is home ; /dev/sda10 having the [once] ubuntu installed files without /boot folder ; /dev/sda3 my fedora installation from where am typing this. Can i make a dual boot of ubuntu and fedora now without the need of reinstalling ubuntu again

View 1 Replies View Related

Ubuntu Servers :: When Attempting To Switch To A Static IP Address, The Vent Client Will Not Detect The Vent Server At All?

Nov 18, 2010

I've been attempting to figure this out for about 4 days straight, so far it has not been fruitful. I've installed Ubuntu 10.04 server onto my former gaming system, Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 2 cores with 2 GB ram. Overkill I'm sure, especially for a simple personal voip, htpc, storage server.

The problem is only noticeable when I have the vent server running, on the 10.04 server, and I attempt to connect to it through the LAN via the client on my windows computerEverything works fine and connects, LAN and from the outside, as long as the server is set to DHCP. However when attempting to switch to a static IP address, the vent client will not detect the vent server at all.Aside from an annoyance at having to stick with DHCP, I am still curious as to why the static settings will not function. Something so simple has turned into something quite difficult.

I can still connect to the Webmin interface and Putty into server with either DHCP or static IP enabled.I've performed the following troubleshooting steps so far:1) Followed the directions at https://help.ubuntu.com/8.04/serverg...iguration.html2) Edited the /etc/network/interfaces file through the CLI with nano and through notepad on the windows computer3) Through Webmin I've assigned the static IP, although for some reason it does not include a gateway field.4) I've rebooted the server5) I've issued the CLI

Code:
sudo /etc/init.d/networking restart
Here is the file /etc/network/interfaces:

[code]....

View 6 Replies View Related

Server :: Blocking Dhcpd Address Lease For Specific MAC Address?

Sep 4, 2009

I hv Cent OS 5.3 installed as server. I hv a network of approx 100 desktops and laptops. For a security purpose i want to block certain laptops from gaining a the network access using dhcp. Can we block the ip address leasing if a specific MAC address request for a ip lease?

View 7 Replies View Related

Server :: IP Address In Ubuntu \ Dont Find Inet Address?

Aug 4, 2011

If I give "ifconfig" in my laptop I get eth0,lo,wlan0.In that where do I find my Ip address in Ubuntu in 10.04. In eth0 I dont find inet address.Where can I find it?

View 2 Replies View Related

Fedora :: Replaced /dev/dsp As The Default Generic Sound Device?

Sep 4, 2011

I have old app that by default is looking for /dev/dsp as an audio device. The source is configured as such and I want to change that so sound will work on current versions of Fedora.

What is the equivalent of /dev/dsp in F15 ?

I think /dev/dsp was the default generic sound device .. ?

View 8 Replies View Related

Red Hat / Fedora :: Warning: The Command '/usr/bin/whatis' Has Been Replaced By A Script

Oct 20, 2010

i finally get my server reformat and replace with redhat server v 5.5 ... [URL] and the same thing show in rkhunter log..

like this

"
[18:00:36] /sbin/ifdown [ Warning ]
[18:00:36] Warning: The command '/sbin/ifdown' has been replaced by a script: /sbin/ifdown: Bourne-Again shell script text executable
[18:00:36] /sbin/ifup [ Warning ]

[code]....

View 2 Replies View Related

Ubuntu :: Give Server A Actual Address And Not Ip Address?

Mar 15, 2011

i am pretty much brand new to ubuntu i have messed around with it a little and have gotten my apache2 server up and running what i have some questions on is

1. How can i give my server a actual address and not my ip address?

2. Is there any way i can put like forum software on part of it? if so how?

3. What is the best way to write web pages i know some html so thats how i was able to write what i have now just wondering what best way is

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved