i just tried to install Ubuntu Netbook 10.04 on my old Amilo Lifebook P Series. But after the boot screen and the choice to install Ubuntu i get stuck at the Ubuntu screen with the little dots on the bottom If I hit esc i can see the warning (process 257): GLib-WARNING **: getpwuid_(r) failed due to unknown user id (0)
View 2 Replies"(process:325): GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)"
It comes after choosing language, when the Ubuntu start-up logo shows with the 5 dut under it. I am trying to install Ubuntu Netbook on a little Compaq Mini.
When i try to install Ubuntu 11.04 or try without installing i get graphics like this:[URL] same with older versions, and on older versions i used to get this error: (process:257):GLib-Warning**:getpwuid_r():failed due to unknown user id(0) but on new version it dosent appear. My graphics card is: GeForce 7600GT MSI.
View 3 Replies View RelatedI'm getting strange error after the splash screen in lucid
(process:290):GLib-Warning**:getpwid_r():failed due to unknown user id(0)
(process:315):GLib-Warning**:getpwid_r():failed due to unknown user id(0)
after this error the screen just hangs.
Installing 10.10 from disk, at some point during installation an error occurs and this appears:
(process:426): GLib-WARNING** getpwuid_r(): failed do to unknown userid (0)
Currently running 10.04. Just did some updates and when it finished rebooting it just doesn't work right. Whenever I click on my user name to enter my password it freezes for 3-5 seconds then the screen reloads. If I do Ctrl+Alt+F7 I get this error(the title of the thread). I have no earthly idea what this means but everything was working great until I did my updates just a couple hours ago. on??
View 9 Replies View RelatedGlib-Warning **:getpwuid_r(): failed due to unknow user id (0)
when you restart the following message appears : [URL]
I tried posting this before and I'm not sure what happened but I don't think it worked, so if it did please forgive the double post.am very very new to centOS and linux in general. I just want to setup a test web server that more closely mirrors our actual web server that is hosted by rackspace. I've installed centOS and tried to setup Apache, PHP and MySQL from a guide on the web using Yum. When I go to localhost in the web browser I'm able to see the default apache page. However when I create a php page it's just blank.When I look at the apache error logs I get this: PHP Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0
I've been searching alot on the internet and I know the issue is permission related, but I don't know how to fix it. I've seen some forum posts that say you need to use the chmod 775 command on the /var/www/html folder.Currently when I do ls -l /var/www/html it returns
-rw------- 1 root root 19 May 5 13:16 index.php
-rw------- 1 root root 19 May 5 13:15 index.php~
I'm sure that this isn't correct but like I said I don't know much about how to set permissions or who the owner needs to be. I've done alot of searching and seen similar posts, but no one seems to explain it clearly.
Quote:
(gimp:4216): GLib-WARNING **: /build/buildd/glib2.0-2.28.6/./glib/goption.c:2132: ignoring no-arg, optional-arg or filename flags ( on option of type 0
segmentation fault
gimp stopped working on kubuntu after installing updates, any fix?
I just isntalled LAMP using tasksel and have a problem. Whenever I try to access a page (aside from phpmyadmin, that works well), I get this error... Code: Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0 Fatal error: Unknown: Failed opening required '/var/www/index.php' (include_path='.:/usr/share/php:/usr/share/pear') in Unknown on line 0
I have restarted the computer, restarted apache, etc and still nothing. When I first installed, phpmyadmin was inaccessible, so I ran some command in terminal which apparently created a symlink between phpmyadmin in the user/share dir to the /var/www dir, and curious if this is the problem. I have no clue how to remove this symlink if this is the case, and have phpmyadmin working now due to install using sudo apt-get install phpmyadmin.
This is my slackware 13.1 new installation `.xsession-errors'.
Code:
<stdin>:1:3: error: invalid preprocessing directive #Those
<stdin>:2:3: error: invalid preprocessing directive #or
<stdin>:3:3: error: invalid preprocessing directive #Xft
[code].....
(polkit-gnome-authentication-agent-1:1742): GLib-GObject-WARNING **: cannot register existing type `_PolkitError'
(polkit-gnome-authentication-agent-1:1742): GLib-CRITICAL **: g_once_init_leave: assertion `initialization_value != 0' failed
My recent issue is that when i start firefox 3.6.7 OS 9.10 is that the terminal will pop up and have this error: (firefox-bin:2690): GLib-WARNING **: g_set_prgname() called multiple times. I can only have firefox running when the terminal is running.If I close the terminal firefox will close as well
View 2 Replies View RelatedRead an article on Lifehacker about the new Thunderbird 3; decided to install it. I installed just Thunderbird itself first,
Code:
sudo yum -y install thunderbird
but when I try to run it I get this error:
Code:
(thunderbird-bin:17467): GLib-WARNING **: g_set_prgname() called multiple times I've since updated completely (which changed nothing, since I updated right before I installed Thunderbird) and installed thunderbird-lightning and thunderbird-enigmail, as they are both extensions I used in the past, to see if they would pull in any odd dependencies to solve the problem.
Code:
Installed Packages
thunderbird.x86_64 3.0-4.fc12 @updates
thunderbird-enigmail.x86_64 1.0.0-1.fc12 @rpmfusion-free-updates
thunderbird-lightning.x86_64 1.0-0.16.20090916hg.fc12 @updates
[code]...
Failed to read mirror file. it eventually shuts down saying "reverting to original state"?
Whenever I try to install Xubuntu onto my really old computer (not this one), it goes to a screen that shows nothing except the Xubuntu logo and the name. After a bit, my monitor falls asleep, and I am unable to wake it back up.If I press enter while at this screen, it brings up the error message in the title. The same thing happens with all the options I try to press.
View 1 Replies View RelatedI am trying to install Ubuntu 10.10 from a USB flash memory stick. It works fine until around 95%, where I get the following warning/error:
[Code]....
I click OK and the installer seems to finish nicely, except the terminal throws several errors along these lines (see photo):
[Code]....
I tried also with 10.04 LTS, the difference being that the install warning appears two or three times instead of once. Some results from googling (Ubuntu Forums, Ubiquity bug) suggest unchecking the initial update options. I am going to try this but I'm not sure if I'll be able to get the boot loader right (there seemed to be problems with this).
I've been using synergy on Ubuntu 9.04 and windows xp.Synergy 1.3.1 on both machines.My problem is that the server keeps cutting out. It seems to happen a lot when I watch flash videos on the server machine (ubuntu). This is what the server side looks like:
Code:
NOTE: synergys.cpp,500: started server
INFO: CServer.cpp,1141: screen "server" shape changed
NOTE: CClientListener.cpp,127: accepted client connection
[code]....
I dont think I usually get disconnected when doing other tasks. Mostly only when watching flash videos. Sometimes it doesnt automatically reconnect, and I have to kill synergys and restart it.
I am running Ubuntu 9.10 Karmic Koala, and I am having problems with GDB. When I attempt to debug a C program in kdbg or codeblocks, the output terminal will display this message: "warning: GDB: Failed to set controlling terminal: Operation not permitted" I have searched quite a bit and I have not found a fix that works.
I am running the latest stable versions of all my software supplied by the ubuntu repositories My system meets all the dependencies for KDBG and Codeblocks
I am running gnome, but the KDE files installed by Synaptic are version 3.5.10
I have KDBG version 2.1.1
I have GDB version 7.0-0ubuntu1
I have CodeBlocks 8.02-0ubuntu4
If anybody needs any more information in order to give ideas or knowledge on how to fix this just let me know
If you start gedit from the command line, then you can see this assertion error:
[bart@vectra ~]$ gedit &
(gedit:17187): GLib-CRITICAL **: g_string_append: assertion `val != NULL' failed
sys:1: Warning: g_string_append: assertion `val != NULL' failed
I have serious sound breakup with fedora 12. When I try I get: gnome-volume-control: WARNING **: Connection failed, reconnecting over and over. I know there is a price to be paid in terms of time and effort to run Linux. But I don't really want to have to fiddle with my sound system each time I upgrade. Every time I get my hopes up that Linux is easy enough to attract wide appeal, something comes along to show me I'm wrong. Most people don't want to live with the hassle. I will continue whether I get an answer or not. I will figure this out one way or another. But if more people were attracted to use Linux it would be easier for all of us.
View 4 Replies View RelatedMy system has stopped to boot at all...
Code: Select alldone.
Setting parameters of disc: (none).
Setting preliminary keymap...done.
Activating swap...done.
Checking root file system...fsck from util-linux-ng 2.17.2
[Code] ....
An automatic file system check (fsck) of the root filesystem failed. A manual fsck must be performed, then the system restarted. The fsck should be performed in maintenance mode with the root filesystem mounted in read-only mode. ... failed!
The root filesystem is currently mounted in read-only mode. A maintenance shell will now be started. After performing system maintenance, press CONTROL-D to terminate the maintenance shell and restart the system. ... (warning).
Give root password for maintenance
(or type Control-D to continue): _
For now, I just don't know what I should to do next to my system has started to work again...
OpenSuse 11.2 Downloaded ISO Master 1.3.8 from here: [URL] Opened the Slackware 13.1 ISO within it, tried to modify the Tagfile which resulted in the error:
Quote:
Edit failed, check Options/Editor and running ISO Master from the terminal showed the error in the title of the thread!
I've installed BOINC for first time (from suse repos). I'm worried about running BOINC as root. How can this be avoided? I'd first like to exhaust all options with the official opensuse repo version of BOINC. If I am unsuccessful, then I'll try the version from Berkeley website.
View 13 Replies View RelatedI'm struggling to get my wireless connection working. During an install of the compat-wireless-kmp-desktop driver a warning occurs:
WARNING: /lib/modules/2.6.31.12-0.1-desktopp/kernel/drivers/net/wireless/wl12xx/wl12xx.ko needs unknown symbol_ieee80211_rx
and
Symbolieee80211_beacon_get
What can I do next to get this to work? Running Opensuse 11.2 on Asus 1005PE.
I do not know if this is really something I should worry about. I am running Debian testing on my laptop (HP Pavillon dv6). Today, the aptitude update---aptitude upgrade gave me a new kernel (2.6.39). However, if I boot with that kernel, I get a warning (do not know if that is the way I should call this) telling me that the machine failed to get the i915 symbols so turbo graphics will be disabled.I have not done any serious test, but at first sight I do not notice any difference performance-wise with respect to the previous kernel. what am I supposed to do to fix this?
View 8 Replies View RelatedI'm using a slack 13.37 version and this message is occuring during wine apps running:
preloader: Warning: failed to reserve range 00010000-00110000
Instead of being only a warning, I think it's breaking down and don't know exactly it's a wine or OS problem.
Googling point me a wine problem,
url
and another Ubuntu and Wine topics .
url
url
But I'm in a 32bits option ( no multilibs ), my wine, dependencies packages and procedures are the same installed before in 13.1 . Just system was changed! Anyone have any info on that sytem or wine problem?
Have you guys had this weird nautilus error? When I su to root and run "nautilus" in terminal, errors popped out:
Code: (nautilus:3979): EggSMClient-WARNING **: Failed to connect to the session manager: None of the authentication protocols specified are supported(nautilus:3979): Eel-WARNING **: GConf error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)
[Code]...
i have just updated to openSuSE 11.4 [64 bit]; rkhunter is giving these Warnings :
Warning: User 'rtkit' has been added to the passwd file.
Warning: User 'pulse' has been added to the passwd file.
Warning: User 'statd' has been added to the passwd file.
Warning: Changes found in the group file for group 'audio': User 'pulse' has been added to the group
Warning: Group 'rtkit' has been added to the group file.
Warning: Group 'pulse' has been added to the group file.
Warning: Group 'pulse-access' has been added to the group file.
Warning: Suspicious file types found in /dev: /dev/shm/initrd_exports.sh: ASCII text
Warning: Hidden directory found: /dev/.sysconfig
Warning: Hidden directory found: /dev/.mount
Do these look Normal, Are these False-Positives??
I have installed cpulimit tar archive software on my suse linux DesktopI can limit any process upto a max cpu percentage uses with its pid with below command.# cpulimit -p <pid> -l <percentage>It is working i have tested.But when i run this command for a executable script with following command# cpulinit -e /<path with script file> -l <percentage>it shows message "Warning: no target process found. Waiting for it." though thatscript is running at that time.what could be the issuse.How can i rectify that problem
View 2 Replies View RelatedI've recently installed Fedora 14 (x86_64) on my Alienware m15x laptop which has a NVIDIA GTX 260m onboard. Now I have followed leigh123linux's guide to installing those drivers on F14. The installation is a success and everything seems to be in working order, until the system randomly logs the user out and/or restarts the session with no warning. The screen goes black and the nvidia logo appears and then its back to the login screen again. This can happen many times with no apparent stop insight. This does not happen with the default F14 drivers that come with the installation, I have tried several re installations of the Fedora OS and several re installations of the NVIDIA driver, i still have the same problems.
View 3 Replies View Related