Fedora :: Installing Yum Update And VLC - Warning In File
Jun 14, 2010
I have a problem with the 'yum update':
Code:
Warning in file "/usr/share/applications/gnome-nautilus-folder-handler.desktop": usage of MIME type "x-directory/gnome-default-handler" is discouraged ("x-directory" is an old media type that should be replaced with a modern equivalent)
Warning in file "/usr/share/applications/gnome-nautilus-folder-handler.desktop": usage of MIME type "x-directory/normal" is discouraged ("x-directory" is an old media type that should be replaced with a modern equivalent).
And I also got this warning when installing VLC.
I am using ubuntu 9.10 and I updated by ubuntu machine. It updated but at the end it gave me a message that "You have new mail in /var/mail/root". When I checked it via the command "tail /var/mail/root" it showed me this.
tail /var/mail/root X-Cron-Env: <SHELL=/bin/sh> X-Cron-Env: <HOME=/root> X-Cron-Env: <PATH=/usr/bin:/bin> X-Cron-Env: <LOGNAME=root> Message-Id: <20100318051502.0D1ABB1C01@Infosec-Lab04> Date: Thu, 18 Mar 2010 10:15:02 +0500 (PKT) WARNING: "MaxBytes[leased]" not specified ERROR: Please fix the error(s) in your config file
When trying to do an update or upgrade, I get the following:
Running Transaction Warning: RPMDB has been altered since the last yum transaction. Traceback (most recent call last):
[Code]....
I have tried yum clean all, yum clean metadata, rpm --rebuilddb, and even removing /var/cache/yum. yum info and yum list both work fine. Naturally, this yum problem is preventing me from updating my system.
Whenever I try to play a divx avi file in VLC it starts up, then shuts down again with no warning or error. Is this a bug in the current version. Kaffeine seems to play files OK. Using Fedora 11.
I see these boot.log warning and understand that the directory where these config files are kept has (or is) changing. Okay, but is the correct procedure to just move them over from the /etc/modprobe.conf dir to the /etc/modprobe.d file? I am wondering if some changes to those config files or those that they are related to must be also made? A portion of the boot.log is below.
I installed TeXlive 2010 and when i compile this command pdflatex it shows the following error:
warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr:/usr/share/texlive:/usr/bin/share/texmf-local/web2c:/usr/share/texmf-local/web2c:/usr/share/texlive/share/texmf-local/web2c:/usr/bin/texmf-local/web2c:/usr/texmf-local/web2c:/usr/share/texlive/texmf-local/web2c:/usr/bin/share/texmf/web2c:/usr/share/texmf/web2c:/usr/share/texlive/share/texmf/web2c:/usr/bin/texmf/web2c:/usr/texmf/web2c:/usr/share/texlive/texmf/web2c.
I've just done a clean install of OS 11.2 x86_64, KDE 4.3.1, and got the following message from RPM while installing multimedia support files from Packman using zypper on the command line:
Code: warning: /var/cache/zypp/packages/ftp.skynet.be-suse/noarch/rpmkey-packman-0.3.8-1.pm.1.1.noarch.rpm: Header V3 DSA signature: NOKEY, key ID 9a795806 Similar messages were coming up while installing other packages through Yast, and I'm wondering what the issue is. All of the messages were about the "key ID" at the end of the example line. (Everything is working so I'm not sure if this is a problem or not.)
I've had Ubuntu 11.04 installed on my desktop since it's release. Up until an hour ago, it was working fine. I clicked on an update from the update manager, now booting into a graphical mode is completely broken, (the start-up load hangs at 'Check Battery State ... [0k]'). I restarted my computer, and booted into safe mode, and launched the terminal. This all works fine. I then typed :
Code: sudo gdm start into the command prompt, hoping that I would be able to start things manually. Instead, it spat out this: Code:
gdm-binary[230]: WARNING: Unable to load file '/etc/gdm/custom.conf'. No such file or directory. gdm-binary[230]: WARNING: Unable to find users : no seat-id found. gdm-binary[230]: WARNING: Gdm Display: display lasted 0.070467 seconds
The last line was printed about 8 times, with slightly different times, before it gave up and failed. Some information which might help, I have Gnome 2, Unity and KDE (not sure which version), installed. My graphics card is the GTX 275, and I have driver the Nvidia driver 275.21. So yeah, I think the update has gone and moved custom.conf somewhere, but I have no idea on how to fix it. I have a graphics programming assignment due on Friday and I would be eternally grateful if I could get this fixed well before then.
I am trying to install Fedora on my computer and it boots fine but then comes up with an error it says"Warning : cannot find root file system"Create symlink /dev/root and then exit shell to continue the boot sequencebash:no job control in this shell bash-3.2# I am a completly new to all this so
It appears that the update process on or about 2011.04.28 downloaded and installed a non PAE kernel (kernel-2.6.35.12-90.fc14) on my box. Until this update, it has been installing PAE designated kernels. When this update occurred, it downloaded the PAE headers and debug, devel and debug-devel PAE components. Has anyone else noticed this in their update?
Why isn't there a clear warning against selecting the 'update' option in Meerkat?I know it seems like a good idea to have it, but unless a server speed test is run, it adds a huge amount of time to the install (3 1/2 hours of downloading so far). It's not my internet connection (ADSL2+ - fast), so it must be an overloaded server and/or congested intercontinental data pipes.
After the installation, it's possible to find one's optimal (fastest) server before running updates - and I know from past experience that this makes a huge difference to little old me in Australia. I can certainly update everything much faster than I am currently seeing . I strongly recommend that, if this option is kept in future distributions, it should include a server speed test (and auto selection of the best server?) as well as a realistic warning to the user.
Warning: Do not edit /etc/sudoers directly with an editor; Errors in syntax can cause annoyances (like rendering the root account unusable). You must use the visudo command to edit /etc/sudoers. In the previous section we added your user to the "wheel" group. To give users in the wheel group full root privileges when they precede a command with "sudo", uncomment the following line:
%wheelALL=(ALL) ALL
so i signed in as root and typed in visudo now i alreayd made the changes but how do i exit and save super+x doesnt seem to do it for me since im not using nano and not supposed to cause it causes errors
Today Software Update on Fedora 13 listed updates for OpenJDK, SSH protocol, and SE Linux policy configuration. When I clicked on the Install button I was presented with a list of nearly a hundred fonts that Software Update said were required. They were all fonts that I have removed from my computer over and over - fonts for languages that I do not speak and don't want on my computer.
I unchecked the fonts, but Software Update said it could not continue without installing them. Apparently they are dependencies of one or more of the three packages I mentioned above. Is there a way to figure out what package is constantly installing these fonts?
I note that after deleting the fonts I never have any problem with apps failing to run. And if I go to a web page created with a language that requires a particular type of font, Firefox still displays the page with the correct font for that language, even after removing the fonts from my computer. Are they really required?
I do not know if this is really something I should worry about. I am running Debian testing on my laptop (HP Pavillon dv6). Today, the aptitude update---aptitude upgrade gave me a new kernel (2.6.39). However, if I boot with that kernel, I get a warning (do not know if that is the way I should call this) telling me that the machine failed to get the i915 symbols so turbo graphics will be disabled.I have not done any serious test, but at first sight I do not notice any difference performance-wise with respect to the previous kernel. what am I supposed to do to fix this?
i seem to be having some issues with update-manager. all has been well for months since i installed etch. now, when i try to do an update, i get the error message :
W: Unbalanced action groups, expect badness [CRITICAL:UpdateManager.Backend.PythonApt] BrokenCount > 0 (1)! not sure where to go from here, i trawled some forums for an answer and tried : sudo dpkg --clear-avail && sudo apt-get update and : sudo rm /var/lib/dpkg/available to no avail. here's a copy of my sources.list just in case [URL]
As the title says i updated my system which then needed a reboot. I also installed Mixxx djing software to try it out. So i thought id just restart the system. Usually when i boot into my desktop wireless automatically can connect to my router but not this time, wired only for now... i know theres tons of wireless issue threads but some more experienced users will be able to get straight to the point and run through some diagnostics with me.
I have been using Ubuntu for some time now and am feeling up for a bit of a change but don't want to change completely. I thought of trying openSUSE or Mandriva out before but they didn't feel right and I have heard so much about Fedora I was thinking about trying that but since I don't have any discs and nor can I boot from USB, I started thinking about other ways of installing it to my laptop.
Is there any way I could mount it and add it to the grub/menu.lst so that the iso is loadable when I load into the Grub menu and I can continue its installation from there or, I have heard about a program called UNetbootin which can apparently do the job for, including downloading the .iso.
i just tried to install Ubuntu Netbook 10.04 on my old Amilo Lifebook P Series. But after the boot screen and the choice to install Ubuntu i get stuck at the Ubuntu screen with the little dots on the bottom If I hit esc i can see the warning (process 257): GLib-WARNING **: getpwuid_(r) failed due to unknown user id (0)
When I learn shell script, I want to add my own PATH variable to system previous variables. I find that my linux has the below PATH variables (in the end of this message). It shows 'No such file or directory' although I verify that all the directories exist. Some directories are empty indeed. This will result that warning?
I want to make the present PATH variables correct before I add mine.
bash: /usr/lib/mpi/gcc/openmpi/bin:/home/jeff/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/usr/lib/jvm/jre/bin: No such file or directory
What does this message mean: '(gedit:14074): Gtk-WARNING **: cannot open display:' I'm trying to open a text file from another computer via ssh. Is it a permission problem.
$test=exec ("rar a -r -v10M /var/www/html/utl/packed/folder.rar /var/www/html/utl/Downloads/folder/");
There is no files in /var/www/html/utl/Downloads/folder/ but a few folders are there which need to be added to folder.rar I am using correct exec and outputting it in php but output shows me Warning: No files.
I was installing this AMBER software on my 64-bit Linux redhat laptop. It gave me this error when I compiled it.
gcc -o ucpp mem.o nhash.o cpp.o lexer.o assert.o macro.o eval.o /usr/bin/ld: warning: i386 architecture of input file `mem.o' is incompatible with i386:x86-64 output /usr/bin/ld: warning: i386 architecture of input file `nhash.o' is incompatible with i386:x86-64 output /usr/bin/ld: warning: i386 architecture of input file `cpp.o' is incompatible with i386:x86-64 output
pcode]....
I went to the /usr/bin directory and saw all these executables including "ld", must've been installed by the IT people before they gave me the laptop. What are these files for? Is there a way to update them to x86-64 version?
I am a Debian User, now I have decided to install Fedora 14 x86_64 on my Acer Aspire computer, mainly to develop C++/Java software. Due to this, I have installed a lot of development packages. Shortly after installation, I have encountered problems updating some packages.
Below 'yum update' output: file /usr/lib64/ghc-6.12.3/bin-package-db-0.0.0.0/libHSbin-package-db-0.0.0.0.a from install of ghc-ghc-devel-6.12.3-8.3.fc14.x86_64 conflicts with file from package ghc-6.12.3-5.fc14.x86_64
file /usr/lib64/ghc-6.12.3/ghc-binary-0.5.0.2/libHSghc-binary-0.5.0.2.a from install of ghc-ghc-devel-6.12.3-8.3.fc14.x86_64 conflicts with file from package ghc-6.12.3-5.fc14.x86_64
file /usr/lib64/qt4/plugins/designer/libqwebview.so from install of qt-webkit-1:4.7.2-8.fc14.x86_64 conflicts with file from package qt-x11-1:4.7.0-3.fc14.x86_64
file /usr/lib64/libusrp.so.0.0.0 from install of usrp-3.2.2-9.fc14.x86_64 conflicts with file from package gnuradio-3.2.2-7.fc14.x86_64
REPOs ENABLED: Fedora 14 -x86_64, Fedora 14 - x86_64 - Updates only. Can't be a problem of multiple repos.
I downloaded Java from the Java website, and went into the root to try and make it an executable file, and it says "chmod: cannot access `home/Non-Admin/Downloads/jre-6u25-linux-i586-rpm.bin': No such file or directory". Is there some sort of program I can install that will automatically turn the rpm.bin/.bin into an executable file?
Does anyone know why files in my /tmp directory are not able to rm even using root login? not only that, I can't even chmod or do anything to files in /tmp directory... it always saying "read only file system" warning
