Fedora 13 (2.6.33.6-147.2.4.fc13.i686)
Every time I use YUM from the CLI the following message shows up: Code: Warning: RPMDB altered outside of yum. ** Found 1 pre-existing rpmdb problem(s), 'yum check' output follows: wine-common-1.2.0-1.fc13.noarch has missing requires of wine-core = ('0', '1.2.0', '1.fc13') What is this? How to deal with it?
For the last week or so, I've been getting the following warning whenever I do an update. Is it expected, or should it be bugged?
Code:
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
Warning: RPMDB has been altered since the last yum transaction.
Updating : pulseaudio-libs-0.9.21-1.fc12.x86_64 1/53
dd_wizard
When trying to do an update or upgrade, I get the following:
Running Transaction Warning: RPMDB has been altered since the last yum transaction. Traceback (most recent call last):
[Code]....
I have tried yum clean all, yum clean metadata, rpm --rebuilddb, and even removing /var/cache/yum. yum info and yum list both work fine. Naturally, this yum problem is preventing me from updating my system.
I would like to change the GDM theme on Fedora 10 if possible. I thought I saw somebody say this was not possible... is that true? Why?
View 9 Replies View RelatedIn my yum history listing, I've noticed the "EE" in the Altered column next to some of the entries. It looks like this (example from Section 5.16.1 History [URL]):
Code:
617 | System <unset> | 2010-12-23 13:16 | E, I, U | 30 EE
Does anyone know what the "EE" means?
I am getting an error from yum update and Kpackagekit:
[root@asus-m4n82 tylerm]# yum update
Loaded plugins: refresh-packagekit
Setting up Update Process
rpmdb: page 18816: illegal page type or format
[code]....
How do I "run recovery"? Edit: Ok so it looks like I had som bad ram in my system that caused this - I found a site that told me to do this:
rm -f /var/lib/rpm/__db*
rpm rebuilddb
yum clean all
I did this but now when I try something like yum install firefox it pulls in a ton of already installed packages.
ok, so im pretty mad right now, i've tried to download the iso image of fedora 13 twice today and just to get the same error on both, it says the file is corrupted or it has been altered, the checksum isn't correct, so is it a problem with fedora or what? i downloaded both from their website. what can i do? i don't want to try just to get the same result.i finally got the iso ok, the solution? downloaded it on window$.
View 7 Replies View RelatedI have mulitple files that i need to be altered...is there a way to do so with out having to enter each and every file and do so?
View 3 Replies View Relatedfor some reason my first updating was interrupted and from then i cannot update. i get the following message:
rpmdb: PANIC: fatal region error detected; run recovery
error: db3 error(-30974) from dbenv->open: DB_RUNRECOVERY: Fatal error, run database recovery
error: cannot open Packages index using db3 - (-30974)
error: cannot open Packages database in /var/lib/rpm
CRITICAL:yum.main:
Error: rpmdb open failed
[root@laptop etc]# yum repolist
[Code]....
I'm trying to recover my rpmdb after canceling the installation of a package (dumb, I know). After clearing /var/lib/rpm/__db* and running rpm -vv --rebuilddb I still get an error error: cannot open Packages index using db3 - Invalid argument (22). What should be my next step?
View 7 Replies View RelatedI have Ubuntu 9.10 running on Dell Dimension 8400, 1 gig ram, Pentium 4. No other OS installed. Last night I decided to upgrade from 9.10 to 10.0.4 through Upgrade Manager with the upgrade button. The upgrade ran over an hour and errored in the "Installing the upgrades" step with the following messages on the Terminal screen:
"rpmdb: Program version 4.8 doesn't match environment version 4.7.
error: db4 error (-30971) from dbenv->open: DB_VERSION_MISMATCH: Database environmnet version mismatch
error: cannot open Packages index using db3 - (-30971)
RPM failed to open database, cleaning it up..."
I went to bed without doing anything. This morning at 7:30am EST I checked the status of this and nothing changed to the screen it was still stuck on this error with progress bar at 4 minutes in Upgrade Manager. I can move my mouse and even open Firefox 3.6.3 to search for issues within Ubuntu environment so I am not frozen. I haven't tried anything else yet.
I have a 250 GB external disk, where there was store a hundred and something GB of data. Pictures, music, documents and TV-shows. It was FAT32. In an attemt to make an live USB drive with openSUSE, I did exactly what I shoulden't do: I mistook the external disk for the the USB drive. Now the external disk has a 700 mb linux partition, while 232.2 GB is unpartitioned. TestDisk from CGSecurity is looking to see if there is a lost partition table there, somewhere. Is there anything I can do? There was no formating, so the data is still there (except for those 650 mb that was overwritten). Is there any way to rebuild the old partition?
Output from "fdisk -l":
Disk /dev/sdc: 250.1 GB, 250059350016 bytes
64 heads, 32 sectors/track, 238475 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
[code]....
i just tried to install Ubuntu Netbook 10.04 on my old Amilo Lifebook P Series. But after the boot screen and the choice to install Ubuntu i get stuck at the Ubuntu screen with the little dots on the bottom If I hit esc i can see the warning (process 257): GLib-WARNING **: getpwuid_(r) failed due to unknown user id (0)
View 2 Replies View RelatedToday i upgraded my system and started getting error when i update, install or remove a package. The error isn't restricted only to one repository so i thing something is wrong with my system.
[Code]....
I just installed Fedora 11, and am now running a Yum Update. It has run for a while, but now I have this message:
warning: rpmts_HdrFromFdno: Header V3 RSA/SHA256 signature: NOKEY, key ID d22e77f2
updates/gpgkey | 1.6 kB 00:00
Importing GPG key 0xD22E77F2 "Fedora (11) <fedora@fedoraproject.org>" from /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-i386
Is this ok [y/N]:
Do I say yes or no to this? I don't know what it is.
I've always used SSH to get to my Linux server and decided to figure out VNC. I've got VNC installed just fine and was logged, then I click Exit on the VNC screen and all hell broke loose. So I'm left with a gray useless screen, so I though I would kill the process. Did a ps -aux | grep vnc and saw what is running Then did a vncserver -kill :1 and vncserver -kill :2 Then typed vncserver
Now I'm getting Warning: blahblahblah:1 is taken because of /tmp/.X1-lock Remove this file if there is no X server blahblahblah:1 Warning: blahblahblah:2 is taken because of /tmp/.X2-lock Remove this file if there is no X server blahblahblah:2 So per the man pages I need to go here $HOME/.vnc and kill something. So How do I get to $HOME/.vnc? Is this a hidden location? I'm thinking I need to do a kill -9 .X1-lock per the above Warning message but where is that?
Since upgrading last week we keep getting a red icon warning msg for the ABRT system - it's not really something we want to have activated - is there any way to turn it off ?
View 3 Replies View RelatedI'm experiencing a problem with cron.hourly running mcelog.cron on Fedora 11:Quote:mcelog: warning: 18446744073709551600 bytes ignored in each recordmcelog: consider an updateI've read a dead end email thread here from February 2010 describing what I am seeing on Fedora here:Does anyone have any insight into this problem? This is relevant portion of strace(1)ing mcelog which shows /dev/mcelog is open()d and configured correctly:Quote:
open("/dev/mcelog", O_RDONLY) = 3
ioctl(3, MTRRIOC_SET_ENTRY, 0x7fff13129bac) = 0
ioctl(3, MTRRIOC_DEL_ENTRY, 0x7fff13129ba8) = 0
[code]...
I have a problem with the 'yum update':
Code:
Warning in file "/usr/share/applications/gnome-nautilus-folder-handler.desktop": usage of MIME type "x-directory/gnome-default-handler" is discouraged ("x-directory" is an old media type that should be replaced with a modern equivalent)
Warning in file "/usr/share/applications/gnome-nautilus-folder-handler.desktop": usage of MIME type "x-directory/normal" is discouraged ("x-directory" is an old media type that should be replaced with a modern equivalent).
And I also got this warning when installing VLC.
I had occasion to add a few lines to rc.sysinit. Turns out the lines syntax was wrong. Instead of the booting ignoring those lines and proceeding on, then giving me an error warning or perhaps dumping into the interactive mode it just hung up! After several tries at moving on I discovered ESC dropped me into some sort of unannounced shell I got the installation disk out and with the repair system option using VI I got the lines deleted and all went back to normal. Now my suggestion is that if something does not make sense in terms of syntax while booting then cover it by doing the above and ignoring it with a warning later.
View 14 Replies View RelatedI have a new (few months) HP Compaq laptop where I run Fedora 13. A couple weeks ago, it started complaining about too many bad sectors in the HD. What I have done is to remove palimpsest from load-on-start list, so I don't get the annoying message. I know the palimpsest Disk Utility has given problems like this (false positives) in Ubuntu, and F11. So my concerns are:
Is it normal in F13 to get those palimpsest warnings? Or should I consider the idea that my new HD is really failing? If this is a bug in palimpsest, is it going to be fixed soon?
When I run libreoffice from the terminal as root, I get
Code:
Over and over for about 7 time and then
Code:
I've found several post referring to this error message, but the one's that were resolved, tended to include a reinstall, reboot and mysterious magic fairies fixing the problem.
i get this warning from selinux :
"SELinux is preventing /bin/mailx from append access on the file /var/lib/rkhunter/rkhcronlog.OmRFCZOynG."
I tried to fix it by "# /sbin/restorecon -v /var/lib/rkhunter/rkhcronlog.OmRFCZOynG" as suggested by SELinux but it comes back with another warning, but with a different /rkhcronlog.xxxxxxxxx...
i think its just a way of rkhunter logging issue -. attached here is the actual error message by selinux.
Suckit rootkit... Warning: /sbin/init INFECTED
How can I remove this guys? using fedora 15 64bits
Last week, i updated, my fedora. After that, during every boot up, I am getting a warning message like " Your hard disk may failing". It indicates that it is due to bad sectors. But I don't think so. There was a bug reported for a similar problem in fedora 11. I think it is not fixed yet. Hard disk is not having any problem during data access. Other OS including windows are not giving any warning message.
View 9 Replies View RelatedA week or so ago there was update to Fedora 14 that affected the wlan settings. Since then I keep getting a "low signal on..." warning. This flashes up at least every five seconds. I KNOW I have a low wi-fi signal! I don't need constantly reminding of it. Is there any way I can turn this warning off? I am using KDE4.6.1.
View 12 Replies View Relatedproblem in installin ns-2.28 on fedora 12 with gcc-4.4.4
[Code]....
i'm heaving the following message at boot time: "Starting udev: udevd[114]: unknown key 'DEVTYPE' in /etc/udev/rules.d/70-cups-libusb.rules:6", i guess it's something about usb printing support but i am not sure, and i don't know how to fix it, does any of you guys know what this exactly means and how to fix it
View 6 Replies View RelatedWhenever I try to play a divx avi file in VLC it starts up, then shuts down again with no warning or error. Is this a bug in the current version. Kaffeine seems to play files OK. Using Fedora 11.
View 10 Replies View RelatedI see these boot.log warning and understand that the directory where these config files are kept has (or is) changing. Okay, but is the correct procedure to just move them over from the /etc/modprobe.conf dir to the /etc/modprobe.d file? I am wondering if some changes to those config files or those that they are related to must be also made? A portion of the boot.log is below.
[Code]....