Red Hat / Fedora :: Cannot Install VLC Missing Libx264.so.83
Jun 19, 2010
It's been days and I still haven't found out how to install VLC. It says it requires libx264.so.83. I have libx264, and some other package listed as what's available in the following output when I issue "yum install vlc"
Code: [root@yoshii <myusername>]# yum install vlc-core
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
Resolving Dependencies
[Code]....
You could try running: rpm -Va --nofiles --nodigest can anyone shed some light on this? I need/want VLC for some videos I have that wont play with MPlayer.
View 4 Replies
ADVERTISEMENT
Jul 1, 2011
I like to install kazam a screencaster, so added the ppa. But during installation I get following dependency issue
[code]...
Obviously I like to ask the repo from where I can get those, but before that ; why debian missing those in its repo ( I am using testing ) and how ubuntu manage those to include in their repo ? May be a topic for debian decision maker, though interested to know.
View 14 Replies
View Related
Apr 8, 2009
I would like to install on my box FFMPEG with libx264 support. First of all I've tried yum install ffmpeg, but it occurs that it downloads a version from 2007 (?) and without libx264. Than I've tried this: [URL]. And everything goes ok till last ./configure:
./configure --enable-gpl --enable-postproc --enable-nonfree --enable-postproc --enable-libfaad --enable-swscale --enable-avfilter --enable-pthreads --enable-libxvid --enable-libx264 --enable-libmp3lame --enable-libfaac --disable-ffserver --disable-ffplay
And in this moment I do "make" and get:
-bash-3.2# make
gcc -DHAVE_AV_CONFIG_H -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_ISOC9X_SOURCE -I"/usr/local/lib/tmp/ffmpeg2/ffmpeg" -I"/usr/local/lib/tmp/ffmpeg2/ffmpeg" -fomit-frame-pointer -pthread -g -Wdeclaration-after-statement -Wall -Wno-switch -Wdisabled-optimization -Wpointer-arith -Wredundant-decls -Wno-pointer-sign -Wcast-qual -Wwrite-strings -O3 -fno-math-errno
-c -o libswscale/swscale.o libswscale/swscale.c .....
libswscale/swscale.c:3409: warning: assignment discards qualifiers from pointer target type
make: *** [libswscale/swscale.o] Error 1
And as you can see I get a lots of errors. Tried to install it for 5 day now, How to make this work??
View 2 Replies
View Related
May 1, 2010
My system had a child related crash(apparently glowing switches are fun to play with) while mplayer was running and now libx264.so.59 is missing. I've tried searching for it and can only seem to come up with RPMs
View 6 Replies
View Related
Jun 12, 2011
I was trying to run record it now, and switched from recordmydesktop to ffmpeg and it kept crashing. I tried it with the command line
Code:
ffmpeg -r 30 -s 1680x1050 -f x11grab -i :0.0 -vcodec msmpg2v2 -qscale 2 filename.avi
I have the following installed, but it's wanting libx264 which I don't see at slackbuilds.org:
[Code]....
Where should I start looking for missing things or...?
I also looked for xvidcap and kazam at slackbuilds.org but didn't see them there. Are those available?
View 10 Replies
View Related
Jun 3, 2010
were do i get the .dev files for libx264 0.98 i think is the version it is asking for.I install the latest libx264 from git or does that install the .dev file also.
View 3 Replies
View Related
Jan 29, 2011
I'm using mencoder to encode a DVD on my computer (reading it is not an issue), and I'm having trouble getting the codec to read a certain library.My command includes these options:
Code:
-ovc lavc
-lavcopts vcodec=libx264 (I also tried with libxvid)
It spat out this error at the end:
Code:
Cannot find codec 'libxvid' in libavcodec...
Couldn't open video filter 'lavc'.
Failed to open the encoder.
Exiting...
Unless I can get this working I'll fall back on mpeg4 but I would like these codecs. I've had good experiences with them. I've checked and the libx264-98 package is installed, along with libxvidcore4 and avifile-xvid-plugin Is this a permission problem? Or do I have to set a conf file? DO NOT suggest using a different -ovc or vcodec. If you have one that works for you, keep that for yourself. I am going to use lavc.
View 4 Replies
View Related
May 25, 2011
OS: Ubuntu 10.04 LTS (Lucid Lynx)
I have installed the latest ffmpeg using this tutorial : HOWTO: Install and use the latest FFmpeg and x264.
What ever I do I always get the same error when trying to use ffmpeg with the new presets setting. I've searched forums and google the whole last day and now I'm pretty lost.
Here is the command I use (I've stripped it down to it's simplest form.):
Code:
$ ffmpeg -i ~/Desktop/input.mkv -vcodec libx264 -vpre lossless_slow ~/Desktop/output.mp4
and this is the error:
[Code]....
I've tried changing the bitrate, adding -pass 1, bitrate tolerance, quality based etc... I've tried at least 60 different things... reinstall ffmpeg countless times using different tutorials. It's always the same error.
View 6 Replies
View Related
Jun 19, 2010
(1)I got ffmpeg-checkout tarball dated 5 june 2010 . It was bigger than ffmpeg-export of same date but I noticed the binary ffmpeg & ffplay generated after './configure' & 'make' are same size.
(2)I am using ubuntu 8.04 with GNOME. I am able to compile ffmpeg with following options
[Code]....
Do I have to get tarballs (of libx264 & libtheora) & compile them .
View 6 Replies
View Related
Jul 23, 2010
problem, I have just installed Fedora 13 on to a new build but for some reason I am missing the top and bottom taskbars. I can see the GNOME desktop with two icons, I have managed to get yum running, which is currently downloading updates. I have used the same live CD on other systems with incident.Just wondering if there is some thing I could try to reset or start a service setting etc to get the taskbars to show?
View 3 Replies
View Related
Dec 1, 2014
I have an asus pc, and its network hardware is not recognized by debian, the drivers are not even in the list provided during the installation process. I managed to download them from another pc, but if i try to make them and install them, i'm stucked because Make is not installed on debian (nor is sudo).So i need a connection to install the drivers that provide me a co0nnections..
View 4 Replies
View Related
Mar 24, 2010
I am recently installed Fedora User (From a Live USB) I tried to install the updates that are detected here in my computer, but because a missing repository it don't installs.
View 8 Replies
View Related
Jan 14, 2009
I have just downloaded this theme: [URL] I tried using emerald to install the theme - I can see the theme there, but I cannot install it. I opened CCSM, and see no option for a theme. I am rather new with linux, so I am more than likely missing something
View 2 Replies
View Related
Feb 21, 2011
i a newbie at linux and i installed Fedora 14 with minimum services and software in order to install Dynamips/Dynagen (Cisco router emulator).when i try to install Cisco rpm -ivh dynamips-0.2.8RC2-1.i386.rpm file i get the following:
error: Failed dependencies:
libc.so.6 is needed by dynamips-0.2.8RC2-1.i386
libc.so.6(GLIBC_2.0) is needed by dynamips-0.2.8RC2-1.i386
[code]....
View 4 Replies
View Related
May 3, 2011
I am trying to use kickstart to create a master boot disk for all of my server installs. Unfortunately it seems to be missing some of the packages specified and I can't figure out why. Here is the packages section of my ks.cfg file
Note: all at symbols have been replaced with # because the forum filter seems to think they are urls.
%packages
#admin-tools
#base
#core
#dns-server
[Code].....
View 1 Replies
View Related
Feb 17, 2009
Im trying to run yum install PackageKit and i keep getting :
Error:"" ""
View 1 Replies
View Related
Aug 18, 2009
i wanted to install screenlets under fedora 11 but python wont let me, is there a way to do it i keep getting the Python(abi) dependency missing message I've tryed both 32 and the 64 bits version, even the noarch i found here with no results at all
View 14 Replies
View Related
Oct 14, 2010
I'm running FC11 on an Intel 686 server and would like to solicit some help. I'm writing an Expect script to discover our lab network and would like to insert the results into a mySQL database. I've installed Apache/PHP/mySQL via the LAMPP distribution. I've hit a brick wall, however, in trying to install the mysqltcl library. how to install the library. I have downloaded an RPM, but installatiojn is failing due to missing dependencies: libmysqlclient.so.10 and libmysqlclient_r.so.10. And I have no luck in locating and installing those.
View 1 Replies
View Related
Jan 31, 2009
I have installed Fedora 10 on a Dell M6400. It has 2 disks in a mirror raid. It came with Windows Vista, but I am not doing a dual boot setup. I have formattet the disk with this installation.I downloaded http://ftp.crc.dk/fedora/linux/relea...0-i386-DVD.iso, burned the DVD and did the install check. It passed the check.The installation went fine, but after the first reboot I am getting "Missing operating system".
I have no idea where to begin... Could the installation media be faulty after all? I there anyway to get passed this, without reinstalling? I know this may have something to do with the boot loader, but I don't know anything about it.I have installed Fedora 4,5,6,8,9 and this never happened to me before, but then again, I did all these installations on my old Dell Latitude.... Could this have something to do with the new hardware?
View 8 Replies
View Related
Oct 20, 2009
I've been trying to install Vmware Workstation and keep getting an error about Kernel Headers missing! Although I am pretty sure I have the headers installed for my system. It's looking for the PAE version of my headers which I believe it doesn't exist!
View 13 Replies
View Related
Mar 7, 2010
First off, I have spent several hours searching this and other forums looking for an answer to this, and have tried several things, none of which have fixed this issue. Here is what I'm seeing:I performed a new install of FC12 on a Thinkpad R40, 512Mb RAM, with a 40Gb HDD, 38Gb useable, from a live CD. That leaves a little over 9Gb free for expansion. All went well with the install, but the post-boot upgrade would not complete due to an error with the abrt files. I found a thread discussing this and used the suggested method of performing the updates from a shell, which worked fine. There were LOTS of installations, updates, and replacements, and finally the shell returned "Complete!". After a reboot I was going through the Fedora_12_ User_ Guide.pdf and noticed many items missing from the System Menu as described in section 3.1.1.3 "The System menu". Another thread seemed to address a similar issue with su - then yum groupinstall "GNOME Desktop Environment", which I did. It updated over 870 items, then completed with no errors. At this point I logged out and back in, no change, and then tried a reboot, which also did not change anything. Finally, I'm appealing to the community.
View 3 Replies
View Related
Aug 23, 2010
Unfortunately far for all unicode characters can be displayed in Fedora by default, (much less than in M$ Wnd). There is a tool that aim to find and install missing fonts when an non-displayable character appears, but it starts mainly when I accidentally open non-text file in terminal and never when a web-page I open in Mozilla Firefox (or Konqueror) contains such kind of characters. So, I see a rectangle with hexadecimal number of character in it (or simply empty rectangle in case of Konqueror) and don't know if there is a easy way to see it by installing missing font automatically (or manually at last) for range of this character or a way to install complete font collection to display all unicode characters from all ranges.
View 2 Replies
View Related
Aug 25, 2010
Debian and running Lenny on a server. I'm trying to install dbus and get an error:
So it seems I'm missing the /etc/rc0.d directory. I checked and all the other rc directories are there, from rc1.d to rc6.d, rc.local and rcS.d.
I don't know how deep these things go and I don't know why I'm missing the rc0.d. Can I just create the directory myself and that's it? It doesn't break anything somewhere else if I make it up myself? Or do I need to do something else to get this working?
View 9 Replies
View Related
Mar 12, 2010
I installed openSUSE a couple of weeks ago but didn't use it until 2 days ago. It was the latest version when I installed it.To my surprise there wasn't a gcc or pppoe installed. Or at least there wasn't a command line begging with ppp.I tried to install them both with rpms. I think I got them both, just they don't work very well. In particular rp-pppoe doesn't work at all. It says that there's no modem on eth0, which is very true there's only a eth cable. gcc seems to work but I'm not sure I installed all the dependencies.I can't use yast because of lack of internet. I have to reboot to windows and download rpms.Can you give me a work around? At least for the pppoe then it might fix itself. Can I have some EXACT links to rpms or another solution?
View 4 Replies
View Related
May 17, 2010
i'm searcing for libmysqlclient_r.a 64bit in openSuSE 11.2. On 10.2 it was included in libmysqlclient-devel, but now missing? Is there a package for that?
View 6 Replies
View Related
Aug 22, 2011
I have an acer travelmate 632 running 11.3.The grandkids have been playing playing frozen bubble in fullscreen mode but the "full screen" was actually only the central part of the monitor.Yesterday, there were a bunch of updates. Today, the kids again played frozen bubble but this time, the "full screen" was really the full screen, not the sub-window. After exiting the game, a window popped up telling me that a monitor had been disconnected and would I like to reconfigure. I said yes.
After reboot, the graphical login failed saying that a serious error had been encountered and that I should consult the KDM logs. I went to console mode but was unable to log in. Neither as root or as the regular user. Both fail with "Login incorrect". In fact, the only way in now is via single-user mode.
Looking through the /var/log/messages, I see a curious set of mesages complaining the, for instance, "/dev/sda4 is not in PARTITIONS" note the upper-case. I then see that, despite what "mount" tells me, ?home (sda4) and /boot (sda1) are not mounted. That is, I cannot list their contents. If I manually mount those partitions, I can list their contents.
View 4 Replies
View Related
Jan 17, 2010
I have ubuntu 9.10 freshly installed, and when I go to my ubuntu software center to install applications, there is no install button on the application page. I was wondering if anyone knows how to fix this?
View 2 Replies
View Related
Feb 8, 2010
Alright, so I've been reinstalling OSes quite a bit lately, mostly Linux distros. I decided I wanted to play a game that I had that only worked in XP, so I cleared a partition for it and installed it there. I figured I'd be able to reinstall GRUB2 later and get back into my Ubuntu install - and even if I couldn't, my home folder was stored in a separate partition so it wouldn't be lost...
...well whoops, that was a mistake. When I booted up the live CD, GParted showed that entire hard disk as unallocated space. Disk Utility's output shows everything but the Ext4 partitions (and displays some ridiculously large amount of unallocated space near the end). Fdisk gives me this: code...
From what I've read while searching about this, the Windows install screwed up my partition table... but I haven't yet figured out how to fix this. My two Ext4 partitions are missing (though my one Ext3 partition is still there)... does anyone have any advice?
I can still read my Ubuntu partition (/dev/sda5) in the terminal, but not through file managers, and the partition where my home folder was stored is just missing altogether - exactly the opposite of what I intended when I created it. =/
View 7 Replies
View Related
Sep 25, 2010
While i trying to install apt by yum install apt
I got the result:
View 2 Replies
View Related
Oct 13, 2010
I am missing the GD library on my server so the Captcha is not working.
I looked for the php_gd2.dll in the php.ini but did not see it anywhere.
I am running Fedora 11.0-64 and PHP 5.2.13.
The steps I have tried are:
From the root doing "yum install php-gd"
Then did a "service httpd restart"
I did a grep of various pieces of "extension=php_gd2.dll" in the php.ini but did not see this line anywhere.
My file path is /etc/php.ini
View 7 Replies
View Related
