I like to install kazam a screencaster, so added the ppa. But during installation I get following dependency issue
[code]...
Obviously I like to ask the repo from where I can get those, but before that ; why debian missing those in its repo ( I am using testing ) and how ubuntu manage those to include in their repo ? May be a topic for debian decision maker, though interested to know.
It's been days and I still haven't found out how to install VLC. It says it requires libx264.so.83. I have libx264, and some other package listed as what's available in the following output when I issue "yum install vlc"
Code: [root@yoshii <myusername>]# yum install vlc-core
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
Resolving Dependencies
[Code]....
You could try running: rpm -Va --nofiles --nodigest can anyone shed some light on this? I need/want VLC for some videos I have that wont play with MPlayer.
tcptrack is missing from Debian 6 testing?
View 2 Replies View RelatedI'm trying to install Squeeze onto a new DELL Vostro 1520 laptop. The Windows Device Manager says it is Realtek PCIe GBE Family Controller.
During the network card detection phase, it prompts to install missing firmware file rtl8168d-1.fw from removable media. I understand that this is a non-free blob removed from kernel v2.6.32.
I am running 64 Bit Debian, 6.0 install with VLC and libavcodec52, libavformat52, and libavdevice52 installed. I also installed recordmydesktop which creates an ogv file, and I would like to use VLC to convert the file to an MP4. Then I can add it to a project under Open Shot Video Editor.
I get the following errors when I try to convert the file: Streaming / Transcoding failed: It seems your FFMPEG (libavcodec) installation lacks the following encoder: H264 - MPEG-4 AVC (part 10). If you don't know how to fix this, ask for support from your distribution. This is not an error inside VLC media player.Do not contact the VideoLAN project about this issue.
Streaming / Transcoding failed: It seems your FFMPEG (libavcodec) installation lacks the following encoder: MPEG AAC Audio. If you don't know how to fix this, ask for support from your distribution. This is not an error inside VLC media player. Do not contact the VideoLAN project about this issue. I've used Google to search for the error message, searched on the forum.videolan.org, and searched on this forum. So far, I've not found a lead to the solution. What am I overlooking/missing?
I am a ubuntu user but I want to go to the next level to use debian because what I heard of it, but I get confused to what to install on my computer do I install debian testing or debain stable with testing repositories.
- I want to use this system to the home use only.
- I want to use the newest packages because the stable packages is too old to use.
- What about using more than one repository i.e stable with testing with unstable at the same time (the same sourcelist)
- Is the testing and unstable sid packages good enough for the home use?
things "seem" to work, first time I've really ever used dmraid (usually mdraid), but I'm worried about this error
dmraid -ay
RAID set "jmicron_STORAGE2 " was activated
The dynamic shared library "libdmraid-events-jmicron.so" could not be loaded:
libdmraid-events-jmicron.so: cannot open shared object file: No such file or directory
Two things, why no matter what I name the RAID in the jmicron bios is puts a bagillion spaces after it, and second, I cannot find the missing lib anywhere I've installed all the dmraid* packages.
I hoped to use php-5.2 while keeping close the the centos packages (no external repositories).So I tried the packages from http://dev.centos.org/centos/5/testing/i386/RPMS/ .These packages seem to be compiled without mime-magic support (--without-mime-magic).The previous stable php-5.1.6 packages had this mime-magic support enabled.
View 1 Replies View RelatedI'm running the alsa upgrade script and I have ffmpeg installed so it finds the /usr/local/lib/libavcodec.a first when I want it to use the /usr/lib/libavcodec.so instead because otherwise make errors occur.
Can I point it to use the PATH to /usr/lib/libavcodec.a or should I just uninstall ffmpeg temporarily.
there are 2 related to 11.3: openSUSE_11.3/ and openSUSE_11.3_KDE_Distro_Factory/ Index of /repositories/KDE:/Extra they are not listed as official kde4 repos here KDE repositories - openSUSE, but they are in the same directory structure on the build service so it would assume they are official (what ever official means) They have rpm's I didn't see in community and playground (at least for 11.3) such as audex and clementine I would guess that they are for the stable and factory versions of KDE4 but then shouldn't there be a 3rd for unstable if this was the case? Or do they refer to the distro, 11.3 stable and 11.3 factory
View 6 Replies View RelatedMy system had a child related crash(apparently glowing switches are fun to play with) while mplayer was running and now libx264.so.59 is missing. I've tried searching for it and can only seem to come up with RPMs
View 6 Replies View RelatedI was trying to run record it now, and switched from recordmydesktop to ffmpeg and it kept crashing. I tried it with the command line
Code:
ffmpeg -r 30 -s 1680x1050 -f x11grab -i :0.0 -vcodec msmpg2v2 -qscale 2 filename.avi
I have the following installed, but it's wanting libx264 which I don't see at slackbuilds.org:
[Code]....
Where should I start looking for missing things or...?
I also looked for xvidcap and kazam at slackbuilds.org but didn't see them there. Are those available?
I tend to stay on for long time. My machine is a Fujitsu T4310 tablet. I have got all tablet features previously working properly when I was on Isadora Mint. After installing LMDE to my surprise basic features of the tablet simply worked out of the box but I'm missing a few important features like multitouch, screen rotate and buttons in tablet mode.
As far as my experience with Isadora, it needed a driver called "fjbtndrv", but I couldn't find it in the repos, moreover, I think it might need some tweeks to get it behaving properly. I found some refferences but it refers to other ubuntu based distros, which I can't use of course.
p.s. prefere a solution other than compiling it myself, it looks scary and has lots of dependencies.
I have an harddisk which is old, since many years >10 years, and I recall I crashed few clusters using windows programs which were old and harddisk stuffs doing. So the pc lives with bad clusters, this pc lives very well since many years.Question, the pc has woody debian, which let us to install and exclude bad sectors during install. Bad clusters was an usual thing in the past, but today not anymore.Unfortunately debian squeeze installer coders had the good idea to remove the " bad cluster checking " before installing debian, during install (cdrom netinst).
View 1 Replies View RelatedI'm a Debian testing user (not an experienced one) on laptop Dell Latitude D531 and has encountered a problem: I've often got my laptop slowed down very much and the message appears in a console: Disabling IRQ #19 I've searched for the solution, but failed finding the answer.
dmesg showed:
Code:
[ 21.064461] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 21.067790] cfg80211: Calling CRDA for country: GB
[ 21.160654] padlock: VIA PadLock not detected.
[ 23.545837] fuse init (API version 7.13)
[ 24.354533] tun: Universal TUN/TAP device driver, 1.6
[Code]...
I tried to compile it but it seems to have one extra dependency after the other that needs to be compiled. I'm assuming that it should work since Google Chrome works for Lenny (apparently). Will it be added to backports eventually or anything of the sort?
View 3 Replies View RelatedI want to make a rescue disc for debian such that if anything goes wrong everything can be restored to its original condition. whatever extra packages are installed they should also be put back. most importantly zimbra and its dependencies.
View 1 Replies View RelatedI'd like to know how to leave only tty1 and 2 and permanently disable others. (I'm running Lenny/i386).
View 4 Replies View Relatedwere do i get the .dev files for libx264 0.98 i think is the version it is asking for.I install the latest libx264 from git or does that install the .dev file also.
View 3 Replies View RelatedI'm using mencoder to encode a DVD on my computer (reading it is not an issue), and I'm having trouble getting the codec to read a certain library.My command includes these options:
Code:
-ovc lavc
-lavcopts vcodec=libx264 (I also tried with libxvid)
It spat out this error at the end:
Code:
Cannot find codec 'libxvid' in libavcodec...
Couldn't open video filter 'lavc'.
Failed to open the encoder.
Exiting...
Unless I can get this working I'll fall back on mpeg4 but I would like these codecs. I've had good experiences with them. I've checked and the libx264-98 package is installed, along with libxvidcore4 and avifile-xvid-plugin Is this a permission problem? Or do I have to set a conf file? DO NOT suggest using a different -ovc or vcodec. If you have one that works for you, keep that for yourself. I am going to use lavc.
I'm running Debian Testing and since some time ago I'm getting the following messages:Any ideas how to solve this warnings?
(gtk-update-icon-cache:9204): GdkPixbuf-WARNING **: Cannot open pixbuf loader module file '/usr/lib/x86_64-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders.cache': No such file or directory
Processing triggers for gconf2 ...
[code]....
I just installed the Debian testing release(with LXDE) from this week. Everything works great except the network card. I know the network card works because Windows and the Parted Magic Live cd recognize it. Also "lspci" seems to list the card, but when I fire "ifconfig -a" it is not listed there.
View 12 Replies View RelatedI had a Compiz update two weeks ago, this update came from the official repository of Debian. So everyone had this update, this update did not had a positive effect. The extra plugins on both my desktop and laptop can't be enabled now. Such as Expo or the Animations. I can just use the basic stuff. There have been some partial upgrades ever since for Compiz, so I guess they are still working on it. But my question is; am I the only one?
View 7 Replies View RelatedNot too happy with Ubuntu's venture into 'unity' so intend to give debian a 'test drive'.Re some eye candy, compiz-config settings manager enables numerous attractive settings but it doesn't seem to work on my machine.On Ubuntu wobbly windows and desktop cube works fine but not as it stands with my debian setup.Under Preferences-appearance debian has 3 tabs, Ubuntu has an extra tab which I think may be the key.Is there something extra I need to install on debian to get my 'wobbly windows'.
View 8 Replies View RelatedInstall One :
Installed Debian Squeeze onto my laptop using the netinst cd. During installation, I did not have access to the internet and installed "Standard System" during tasksel.
Install Two :
Installed Debian Sqeeze onto my desktop using the same netinst cd. However, this time I had connected the desktop to my router during installation. Similary installed "Standard System".
Both system later installed with KDE and working fine. Noticed that immediate after installation of the "Standard System", my desktop had more files installed eg. the exim package. Why the extra packages (eg exim) are installed? Are they actually required?
OS: Ubuntu 10.04 LTS (Lucid Lynx)
I have installed the latest ffmpeg using this tutorial : HOWTO: Install and use the latest FFmpeg and x264.
What ever I do I always get the same error when trying to use ffmpeg with the new presets setting. I've searched forums and google the whole last day and now I'm pretty lost.
Here is the command I use (I've stripped it down to it's simplest form.):
Code:
$ ffmpeg -i ~/Desktop/input.mkv -vcodec libx264 -vpre lossless_slow ~/Desktop/output.mp4
and this is the error:
[Code]....
I've tried changing the bitrate, adding -pass 1, bitrate tolerance, quality based etc... I've tried at least 60 different things... reinstall ffmpeg countless times using different tutorials. It's always the same error.
(1)I got ffmpeg-checkout tarball dated 5 june 2010 . It was bigger than ffmpeg-export of same date but I noticed the binary ffmpeg & ffplay generated after './configure' & 'make' are same size.
(2)I am using ubuntu 8.04 with GNOME. I am able to compile ffmpeg with following options
[Code]....
Do I have to get tarballs (of libx264 & libtheora) & compile them .
I would like to install on my box FFMPEG with libx264 support. First of all I've tried yum install ffmpeg, but it occurs that it downloads a version from 2007 (?) and without libx264. Than I've tried this: [URL]. And everything goes ok till last ./configure:
./configure --enable-gpl --enable-postproc --enable-nonfree --enable-postproc --enable-libfaad --enable-swscale --enable-avfilter --enable-pthreads --enable-libxvid --enable-libx264 --enable-libmp3lame --enable-libfaac --disable-ffserver --disable-ffplay
And in this moment I do "make" and get:
-bash-3.2# make
gcc -DHAVE_AV_CONFIG_H -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_ISOC9X_SOURCE -I"/usr/local/lib/tmp/ffmpeg2/ffmpeg" -I"/usr/local/lib/tmp/ffmpeg2/ffmpeg" -fomit-frame-pointer -pthread -g -Wdeclaration-after-statement -Wall -Wno-switch -Wdisabled-optimization -Wpointer-arith -Wredundant-decls -Wno-pointer-sign -Wcast-qual -Wwrite-strings -O3 -fno-math-errno
-c -o libswscale/swscale.o libswscale/swscale.c .....
libswscale/swscale.c:3409: warning: assignment discards qualifiers from pointer target type
make: *** [libswscale/swscale.o] Error 1
And as you can see I get a lots of errors. Tried to install it for 5 day now, How to make this work??
I have an asus pc, and its network hardware is not recognized by debian, the drivers are not even in the list provided during the installation process. I managed to download them from another pc, but if i try to make them and install them, i'm stucked because Make is not installed on debian (nor is sudo).So i need a connection to install the drivers that provide me a co0nnections..
View 4 Replies View RelatedI've heard a lot of talk about people running 'Testing' as a rolling release version of Debian. As I have a spare box to play with, I wanted to see what this was like. I've done a minimal install of Squeeze and had a look at /etc/apt/sources.list. As I would expect, the file refers to Squeeze and not 'testing' (I think Woody used to go for stable/ testing etc, but this then got changed). In order to run 'Testing', can I just replace the Squeeze references and do:
View 6 Replies View Related