Fedora :: Cisco PacketTracer Crash In 12?
Dec 10, 2009
Does anyone experiencing problems with PacketTracer 5.2 in Fedora ? When try to save a project the program crashes with the following error on stderr:
Code:
CPtmpConnection::socketError
callManager : onError
callManager : onDisconnect
Segmentation fault (core dumped)
In /var/log/messages I saw the following error :
Code:
Dec 10 11:03:05 localhost kernel: PacketTracer5[4173]: segfault at 38 ip 00ce4525 sp bffda150 error 4 in libQtXml.so.4.5.3[cca000+43000]
Seems to be a QT4 problem ....
View 1 Replies
ADVERTISEMENT
Oct 19, 2009
I'm running fedora 11 and cisco version 4.8.01 (0640). When I connect to my work, and get authenticated, the system freezes completely. In searching it looks like at one point updating the kernel to a new version resolved this, at least for the 64bit implementation. I'm running 32bit and I'm on kernel kernel-PAE-2.6.30.8-64.fc11.i686 which is a newer version then what was listed in the other thread.
View 7 Replies
View Related
Mar 2, 2010
You have accepted the terms to the EULA. Cisco Packet Tracer will now be installed.
Attempting to install package now Preparing...
I need to do a project for my cisco class and i need to get this Packet Tracer to start working!
View 2 Replies
View Related
Jun 14, 2011
I'm running Fedora 15 with current updates and kernel. I do not have anything special or non-standard about my configuration or setup. I use grsync to sync my home folder files to a remote rsync server on my network. I've checked my hard drives and my memory and everything else I can think. Here is the problem:
grsync will run for some time and once it nears completion it will crash. This, however, is no standard crash. It literally shuts my computer "OFF". I have shared the remote rsync folder through CIFS as well and I can copy those exact same files through nautilus with drag and drop without issue. I have had a few occasions where the rsync process will complete without issue, but this is a rare occasion. Since it powers my computer completely off I do not enjoy the luxury of having any log files or messages to attempt to diagnose from.
View 9 Replies
View Related
Mar 11, 2009
Is using Cisco AnyConnect for ssl remote access, i loged on on my company vpn.abcd.com , using a username and a password, requested a certificate which was added to Firefox certificates, then installed the AnyConnect client. now i can just start the AnyConnect client to connect without the need to access to my company vpn.abcd.comWhat i want to do is to add a vpn connection to the network manager so its always connected once i powered my computer on, and dont need to start the AnyConnect client to get connected each time.
There were three options Password/SecurID, Certificate(TLS), Certificate(TLS) with TPM.I tried the first one, got a message "Unknown certificate from VPN server "vpn.abcd.com". Do you want to accept it?" , accepted entered my password ---> login failedThe other two options need a certificate files which i dont know how to get, is it the firefoxcertificate, or what ?.
View 2 Replies
View Related
May 9, 2009
Just wanted to ask a small question... I've set up a VPN connection to my university and i installed and configured everything ok, cause I can connect without any problems...
Now that I'm connected I want my browser to run through the VPN tunnel created by the connection so i can access certain sites that are else inaccessible, but how do i force my browser (I'm using firefox atm) to do that?
When I'm on MAC of Windows OS, as soon as i connect with a VPN, all connection run through them. Fedora seems to ignore the VPN connection and just continues to use my home-network to connect to the internet.
So the basic question is: how do i use the VPN connection.
Iuse FC10, kernel 2.6.27.21-170.2.56.fc10.i686, fully updated system
View 4 Replies
View Related
Jun 18, 2009
Probably there is bug in kernel used FC11 [url] This bug freeze computer after ping or other data sending over VPN connection.
Is there any chance to backport this patch to kernel in FC11?
More about this in topic:[url]
View 14 Replies
View Related
Feb 10, 2010
i am learning security and firewalling. i want to know . where a linux firewall is sufficeint and where it is not sufficeint? if you can explain why or give a reference i will be glad. is that security or traffic handling problem? when i should select a cisco product? in tarms of traffic and sceutiry. do you have any good alternative recomendation to Cisco
View 1 Replies
View Related
Jun 30, 2010
cisco vpn client 4.8.5 I have no problem to connect it, but got disconnected every minute after I opened a terminal and ssh to company's server. Not sure what's causing the problem. There's no problem to connect to windows.
View 2 Replies
View Related
Mar 7, 2011
Problem with fedora 13, I am no longer able set up a virtual private network using vpn. The following error message appers:
"/usr/sbin/vpnc: no response from target"
No problem when connecting with ubuntu or windows.
View 1 Replies
View Related
Mar 10, 2011
I tried to install CiSCO's Packet Tracer on Fedora 14, though it went thought all stags on installation, it did now show up, any one has had any measure of success installing it? Seems it is much easier to run the Windows version using Wine!
View 8 Replies
View Related
Oct 16, 2009
I just got DHCP working, but I need to add a "Pre-Defined Option" for the Cisco VoIP network here. At least that's what it's called in Windows. This "Pre-defined Option 150" is necessary on Windows dhcp servers tied to Cisco VoIP networks, but I have no idea where to start getting that set up in Fedora.
View 3 Replies
View Related
Dec 16, 2009
I am trying to connect to a cisco console port using the usb to serial converter. I am using minicom and I changed me setting to reflect the USB converter cable, but it isn't working. I have set my baud rate to 9600, 8 data bits and no parity. Minicom acts as if it is connected (it doesn't give any errors), but there is nothing on the screen and nothing happens when I type. Also, I use the tail command and it sees the usb connector connected when I unplug it and plug it back in.
View 10 Replies
View Related
Mar 29, 2010
I have set up one Fedora 10 server.I found that rsyslog service is running on Fedora 10 server.How to configure rsyslog on Fedora 10 to collect the log from Cisco ASA5510 ?
View 2 Replies
View Related
Jun 8, 2010
my cisco wireless card model # wmp600n. Fedora doesn't even recognize that its there and i haven't been able to find any linux drivers for it, tried installing the driver using wine but still isnt working for me...
View 2 Replies
View Related
Jun 21, 2011
I can get a dual band cisco ae1000 to work with fedora 15, but the same steps taken on opensuse don't work. Has anyone managed to get this card working on opensuse 11.4 x64? If so, I've tried compiling a driver and using the repo for an rt3572sta. neither worked. The way i hacked the program (following a fedora forum) worked in fedora but not opensuse. I've tried blacklisting cards and making sure the module loads on boot.
View 1 Replies
View Related
Feb 2, 2010
In fc10 & fc11 everything worked well with vpnc.
With fc12 vpnc starts allows me to connect to my work site then everything works fine til I try and start a remote desktop connections to a windows client use tsclient. All I get is a blackscreen and my laptop is hung.
At work without the vpnc it works fine if I start the vpnc from nm it performs the exact same way and I get the blackscreen.
I have disable selinux.I also disabled the firewall
there was another gentlemen on here with the same issue.
The only way out is a hard reboot and there are no messages in the logs that say there were any problems.
View 3 Replies
View Related
Dec 1, 2009
So I puts my shinny new F12 install on my new computer. It's a little climb for me but for the most part easier then some of the other F's that I have tried to install.
One problem I have right now is my inkscape crashes as soon as I try to put some text on a page. I tried the automatic bug report thingy but it complained about me not having a log in. inksacpe is really becoming a very important application for me, I have been trying to shy away from the Windows programs I have been using.
I must say, F12 seems to really be advancing the fedora project into a nice desktop system.
View 4 Replies
View Related
Jul 9, 2010
after mistyping my session passwd at the kdm login, I retried again and the greeter instantaneosly crashed and X died on tty1 (black screen, blinking cursor in upper left corner) Switching to tty2, I tried to login again but did not succeed to start X again, so I rebooted the system and looked at Xorg.0.log.old. There I found: xf86CloseConsole: VT_WAITACTIVE failed: Interrupted system call
Here we go again!
P.S.:
I do not know how long this error exists, I noticed it only yesterday and the updates today didn't help.
View 2 Replies
View Related
Aug 14, 2011
It just crashed today, I had to press RESET to bring it back.
How can I find out what happened when it crashed, like 'Event Viewer' in Windows?
right now, dmesg shows something like code...
View 3 Replies
View Related
Nov 21, 2008
I have recently installed Fedora 9 about a dozen times and everytime I apply the recommended system updates, the system crashes upon reboot, leaving me at a dead "GRUB" message (not a prompt). I would love to be able to update my version; suggestions?
View 1 Replies
View Related
Jun 24, 2010
I'm Linux beginner. I have cisco vpnclient always down I need to run it automatically when it is down.
View 1 Replies
View Related
Jan 5, 2009
Fedora 10 64bit install from DVD. Working my way through the how to's, this is my first linux experience!When I choose the user switcher > other OR system > Logout user > Switch user my system goes to a blank screen and I can only get it back by using the reset switch (or power off)If user1 logs out, user2 can then log on and vise versa.I can go to applications > terminal as user1 and su user2 no problem ( and back to user1)but if I use the user switcher = problem.I am fairly sure that the users are set up correctly, they all work individually.I searched the forums and there seems to be no current similar problems mentioned.My system is a gigabyte GA K8VM800M (onboard graphics and sound) AMD Sempron 1GB ram 40GB HD I used the DVD to install on to previously used HD with no other OS on it, I chose the 'use the whole hard drive for fedora' option and had no reported problems with the install.Have I got something set up incorrectly? or where should a look for help on this.
View 14 Replies
View Related
Oct 19, 2009
after playing games using WINE, I noticed that the system went Black screen of death.
I had to hard boot the system and now system is hanging. However, I can ssh into the system from another machine so I know only X windows hung.
I can log in using NX client without any issue, but can not log in from the console.
This is the entry from .xsession-errors:
GNOME_KEYRING_SOCKET=/tmp/keyring-4P86Nb/socket
SSH_AUTH_SOCK=/tmp/keyring-4P86Nb/socket.ssh
Window manager warning: Failed to read saved session file /home/stranger/.config
[Code]....
View 1 Replies
View Related
Nov 26, 2009
Almost everyday my notebook freezes. I know the kernel is still up and running because I see my hd led activity lit from time to time and when I pressed the wifi/bluetooth button it also lit on and off with no problem.
The problem is my XWindows, it's just freezes and there's nothing I can do with it. I still can move my mouse cursor but I can't click anything because the screen is just freezes.
I tried to pressed Ctrl + Alt + F2->F5 to go into console mode. Not working.
The only workaround is turn-off and turn it on again.
This happened after I installed F11. with F10 I have never seen such problem
Here is my configuration :
- Notebook Acer Travelmate 6292
- 4 GB memory
- VGA is Intel on-board.
Sofware I uses when the freezes happened :
- Virtualbox 3.0.10
- I use compiz/emerald
- Gnome
- Firefox
- Limewire (sometimes)
View 12 Replies
View Related
Apr 4, 2010
I just upgrade my desktop to F12 and using it for few weeks now..Everything seems working fine except X server crash on me often.
Anybody out there have the same problem?
Need a work around solution for this.
Attattched a copy of Xorg.3.log.old for reference.
My system is as follow:
Intel P4 2.26Ghz
Kernel 2.6.32.10-90.fc12.i686.PAE
memory 1G
View 1 Replies
View Related
May 22, 2010
I have a crash that occurred after first install while updating. The update was 1.2GB Had to reboot 5 times to complete the update downloading process. Much of what I read suggests KDE, xorg and qemu as part of what is causing the crash, but I haven't found a similar issue. After the update completed installation the crashes were less severe but still occur when updating.
Code:
yum update
The latest crash occurred after yum update and left a large amount of information in konsole. It disables wireless networking so not sure how the bug is related. During the first yum update I had to reboot the system to get full functionality back. After the first update I just had to wait for system to return to normal.
Code:
Complete!
[Whereareyou@Iamhere ~]$ kdeinit4: preparing to launch /usr/lib64/libkdeinit4_kbuildsycoca4.so
<unknown program name>(2413)/ KStartupInfo::createNewStartupId: creating: "Iamhere;1274481784;509281;2413_TIME0" : "unnamed app"
kbuildsycoca4 running...
Error: "/var/tmp/kdecache-Whereareyou" is owned by uid 500 instead of uid 0.
kbuildsycoca4(6739) kdemain: Reusing existing ksycoca
kbuildsycoca4(6739) KBuildSycoca::recreate: Recreating ksycoca file ("/var/tmp/kdecache-Whereareyou/ksycoca4", version 162)
kbuildsycoca4(6739) KBuildSycoca::createEntry: new: "screensaver.desktop"
kbuildsycoca4(6739) VFolderMenu::pushDocInfo: Menu "applications-kmenuedit.menu" not found.
kbuildsycoca4(6739) VFolderMenu::mergeFile: VFolderMenu::mergeFile: "/etc/xdg/menus/applications-merged/ggz.merge.menu"
kbuildsycoca4(6739) VFolderMenu::mergeFile: VFolderMenu::mergeFile: "/etc/xdg/menus/ggz.menu"
................................cut out info to fit post requirement
kbuildsycoca4(6739) KMimeAssociations::parseAllMimeAppsList: Parsing "/usr/share/kde-settings/kde-profile/default/share/applications/mimeapps.list"
kbuildsycoca4(6739) KBuildSycoca::save: Saving
kbuildsycoca4(6739) kdemain: Emitting notifyDatabaseChanged ("services", "apps")
--Cursor stays here, hanging out--
View 1 Replies
View Related
Jun 7, 2010
I upgraded from F12 i686 to F13 (I should say clean install). And now ever so often my computer locks up...... I will wait for an update or something this week but if it continues after I may have to go back to F12 (on another HDD)
View 10 Replies
View Related
Jun 12, 2010
I tried upgrade with dvd media and preupgrade from F12 but in both cases there is anaconda exception. I have dual boot windows xp (/dev/sda1) and F12 (/dev/sda2).
sudo fdisk -l /dev/sda:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xa070b627
[Code]...
View 2 Replies
View Related
Dec 4, 2010
I've just installed F14 64bit on my desktop and I tried to run Open Office Writer. As a result, GNOME crashed and the rendering of the desktop was messed up. I had to force a reboot, and now everytime I login the Open Office recover dialog causes a crash again. I suppose it has something to do with the opensource nvdia drivers and OO.o's toolkit but I can't look at it with the crash-on-login thingy there (I suppose I can install the closed source drivers from a tty now that I am thinking it again....)
---------- Post added at 07:27 PM ---------- Previous post was at 07:24 PM ----------
Uh... actually I can't install the closed source drivers. Yum finds no mirrors for rpmfusion >(
...or the Fedora repos :
View 1 Replies
View Related
