Dual boot installed Redhat enterprise linux 5 with windows 7 on a 64b machine. On reboot after loading some files the GUI doesnot show only a black screen and nothing happens.
View 3 RepliesI have problem with my Debian. Sometimes after reboot I can see only mouse cursor (moveable) and black screen with command prompt in top -left corner. I don't know how to fix it...
Code: Select allroot@debian:/home/rafal# lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 8.1 (jessie)
Release: 8.1
Codename: jessie
[code]....àwwwwwwwwwwwwwwwwwwww~s
I've just put a fresh install of 64 bit Lenny on my new HP server. All went well so I thought to install KDE. On reboot, the screen just goes black.Could I have some helpful suggestions on how to start working out what the problem could be?
View 7 Replies View RelatedI just installed Ubuntu and after the restart all I get is a black screen. Sounds like the program booted up but I can't see any thing.
Using a Gforce 9400 vid card.
I tried to update my main computer from Ubuntu 10.0 to 11.04. I wish I could remember what it said, but it crashed during the update. The lights on the keyboard were flashing on and off as well. When I try to boot, all I get is a black screen and flashing lights. The Ubuntu recover also has the same thing. I am going to try a fresh install. For some reason I am leaning to the power manager, but I am no where near sure.
View 2 Replies View RelatedI'm writing from the IBM Thinkpad A30 with Linux CentOS! After installed CentOS I've see a message when the sistem start....and this message said: ACPI: Could not use ECDT. (think is a BIOS error....but this is what I've read with a Google search.....). After the first start I've make the update (suggested by the OS) and, after make the reboot....same problem. I see a black screen and the power light of the HD seems run....but don'a appear any sort of screen immages/text.
View 2 Replies View RelatedSo I updated my software using Yast. One of the updates failed to install. I rebooted and then was in black screen hell with the following information:
Neither the variables MOUSEDEVICE and MOUSETYPE nor the variable GPM_PARAM is set in /etc/sysconfig/mouse
Run 'yast mouse' to set up gpm
Starting hpssd: Checking/updating CPU microcode unused
Starting nfsboot (sm-notify) done
done
Loading keymap i386/qwert/uk.map.gz done
Loading compose table winkeys shiftctrl latin1.add done
Start Unicode mode done
Starting hotkey-setup done
[OK]
Starting cupsd done
Starting powersaved: ###################################
# ACPI system but acpid not running. #
# Start acpid first, then restart powersaved! #
############################################### skipped
Mount SMB/ CIFS File Systems unused
Executing suseRegister (looking for new update channels): skipped
Starting SSH daemon done
Starting ypbind.....................No domainname set skipped
Starting service automounter ("files nis" does not provide any mounts) skipped
Starting Firewall Initialization (phase 2 of 2) SuSEfirewallZ: Warning: ip6tables does not support state matching. Extended IPu6 support disabled.
SuSEfirewallz: Warning: no interface active done
Master Resource Control: runlevel 3 has been reached
Skipped services in runlevel 3: nfs gpm microcode powersaved smbfs suseRegister ypbind autofs
Welcome to SUSE Linux Enterprise Desktop 10 SP1 (i586) - Kernel 2.6.16.54-0.2.5-default (tty1).
linux-bvuz login: Starting ZENworks Management Daemon^[^[^[
I don't have a CD drive attached to the HP 2133.
I just updated from FC 10 to FC 12 via install/upgrade disk, and when re-booted the screen is then black (at the point that it should display logins). I think it may be due to nvidia driver in FC 10 not being upgraded, because I think I compiled it from nvidia rather from yum install. Anybody else have this problem? BTW, it is a dual boot with Win XP, but has never caused a similar problem before.
View 8 Replies View RelatedI am running a dell poweredge 2600 in which i just now did a fresh install of Centos 5.5 KDE. The install went perfectly with no hiccups or errors. I reboot the server and centos dose its normal checking everything and giving a Green"OK" or Red"Error" and everything seems to be fine. I then get to a black screen with a X mouse cursor, i can move the cursor freely and i can turn the Num Lock key on and off and i can do a Ctrl+Alt+F5 and then reboot with a Ctrl+Alt+Del smoothly, but i just cant get the centos to boot up all the way into the GUI.
View 3 Replies View RelatedI have been using ubuntu 10.04 64 bits for about 3 month. Today I change my keyboard layout, so I want to test if everything is ok so I reboot my computer. When I try to reboot everything is as usual but the problem is that after grub. Nothing only a black screen no matter what i do. I doubt the keyboard layout change something but who knows. I run AMD phenom 940 X 4, 4 gig ram, Ati radeon HD 4870.
View 3 Replies View RelatedI am running a dell poweredge 2600 in which i just now did a fresh install of Centos 5.5 KDE. The install went perfectly with no hiccups or errors. I reboot the server and centos dose its normal checking everything and giving a Green"OK" or Red"Error" and everything seems to be fine. I then get to a black screen with a X mouse cursor, i can move the cursor freely and i can turn the Num Lock key on and off and i can do a Ctrl+Alt+F5 and then reboot with a Ctrl+Alt+Del smoothly, but i just cant get the centos to boot up all the way into the GUI.
View 16 Replies View RelatedSo I'm in need of VM'ing a couple OS's to keep from repartitioning and dual booting my desktop. The first I'm trying to boot is a 64bit version of windows (have XP and 7 disc, trying XP for now) as I need to convert some of my work's ancient programs that still use DOS functions.
I choose Virtualbox over VMware just for the sake of VB being in the repos. Install and initial config went fine, but when I try to start (run) the VM the screen goes black, then the computer completely stops responding and needs a hard reboot. Pasting what I believe to be the error part in the log. If you need the entire log I can email or host it - too big for a post. Kernel Version - 2.6.32-trunk-amd64. Debian Sid
Short Version:
Code:
I've just installed Zorin OS onto the hard drive of my Dell Inspiron 8000 laptop. I used the entire drive, overwriting Ubuntu9.10. Now my screen is black. I think the system loaded correctly - I can hear some welcome music and the active l.e.d. of my drive slows and stops flickering. But I can't see anything!Here's what I tried:
- using the keyboard controls to increase the brightness (no effect).
- connecting a flatscreen monitor from my desktop and attempting to use the FN+f6 keys to change the display from the laptop screen to the other (no effect)
- rebooting
- rebooting into Setup (my laptop screen lights up for perhaps 5 seconds and then goes black again)
- rebooting with Ubuntu 9.04 CD in the drive (no response)
- attempting to reboot with my original Windows ME re-installation disc in the drive (no effect)
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies View RelatedI have installed virtualbox because i wanted to run .exe files for my job. After installation and configuration it asked me to reboot. From that moment when reboots it returns the full symbol of fedora and then the screen becomes black with white letters. I couldn't login ever again. I am new in Fedora, i don't have a backup of my files and i cant't work. I think that this could be a command line or something like this. Is there any possibility to login even once to copy my files to another disk and then to setup Fedora again?
View 11 Replies View RelatedI turned on my Acer laptop and during bootup it seemed normal. After it passed the blue Acer logo, all I could see is a black screen and a black cursor outlined in white in the shape of an X. Thinking it would be a one time thing, I turned it off again.it still was a black screen.
View 14 Replies View RelatedWhen I install Ubuntu 11.04 with Wubi, I get this freeze screen after I reboot and get past the Ubuntu splash screen: url
As you can see, it's a scrambled picture of my Windows desktop. This happens with every other version of Ubuntu also.
I'm running a 64-bit PC and I don't wanna waste another CD or use a USB to install, because I actually progress further in my efforts whenever I use Wubi.
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies View Related'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
View 4 Replies View RelatedAfter succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
another post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
View 9 Replies View Relatedi am fairly new to Ubuntu. i was using it fine for a month, but today, when i booted my computer up, it came up with a black screen instead of the normal purple ubuntu screen. the black screen had white text on it, and asked for my username and password. from there, it was a terminal prompt. i have been google searching for a while, and have tried typing "startx", "sudo apt-get install ubuntu-desktop", "sudo gdm", and i have also tryed uninstalling xorg, and reinstalling, and none of these things wanted to do anything for me.
View 4 Replies View RelatedI've been a happy Arch Linux user for years now. Recently, on my eee 1000he (an Atom netbook with intel GMA graphics) I've been seeing strange things. After it has been on for some time (usually hours), the screen starts to jitter, just for a fraction of a second, every now and then. After this has happened some times, the screen goes black (one time it went red). The backlight is still on and I can still ssh to the machine which reacts normal appart from the black screen. I can only regain the screen when rebooting. What could this mean? Is it hardware or software? X logs don't shown anything weird, where should I look? I haven't found anyone with the same problem on the net.
View 4 Replies View RelatedProblem-PC automatically boots into a black screen with blinking cursor. No message or nothing
I have 4 HD. Primary drive has Windows Vista, Secondary no OS installed. Sata1 HD Ubuntu 10.04, Sata2 Windows 7. Prior to installing windows 7 all was perfect but once I did it, grub got all screwed up. The only way I can boot into grub is if I manually select my Sata1 which has Ubuntu on it and only then it allows me to select Linux or Windows OS. How can I change that so it can boot up normally as before? I'm assuming that grub was installed in the primary drive which has vista on it, but once I installed windows 7 it got deleted and when I tried reinstalling Ubuntu, the grub was not installed in the primary drive.
I have spent the better part of 2 days perusing these forums for assistance. Here is the short story:I run a 7 year old custom build with a 82865G Intel Chipset and a NVIDIA FX5200 graphics card. Had been running a sluggish XP and after adding 2GB of fresh RAM wished to start fresh with my old friend, Ubuntu.
I've tried 10.04 LTS with and without my NVIDIA card installed with no luck. I have successfully installed 10.04 using the alternate install, but this also goes to black. I can hold shift to see GRUB and play around there, but no luck so far. I've also tried 9.10 but have not gotten past the pulsing Ubuntu image. I've seen plenty of support for NVDIA and Intel onboard graphics chips suggesting boot commands like nomodeset and i9015.modeset=0/1...it's all falling short.
I'm heavily leaning towards just installing an earlier LTS or a different linux distro all together. If there no one can help me debug, maybe someone can suggest a distro that will make me happy.
I've installed ubuntu 10.04 onto my Dell Latitude e6510 (through the wubi installer), but I can't get anything except a black screen. I'm pretty new to ubuntu, but after a bit of looking around at graphics issues I found a bunch of boot parameters and tried different combinations of them. i915.modeset=0 Gave me the purple loading screen, until the screen went black and I got flashing caps lock and scroll lock lights.xforcevesa gave me a completely black screen -- not receiving power at all
I also tried noapci, acpi=off, irqpoll, and pci=routeirq as parameters. None of those had any success.I've also tried letting ubuntu boot with a black screen until I heard the African drums and pressing Ctrl+Alt+F1 to go into the console, but the screen stayed black then as well.
I was able to get Fedora 10 to run on VirtualBox. Since the system wouldn't let me set the resolution to anything bigger than 800 x 600, I decided to get the nVidia driver (I'm running the nVidia 8400m G). I did it through this guy's tutorial: [URL]... After rebooting, I see the loading bars and everything, but I get a blank screen with a cursor. After pressing ctrl+alt+F3, I was able to log in to the root and execute the "akmod builds the required kmod on bootup" under the "For GeForce 8 series" [URL]... After a reboot, I still get the same thing. Will I have to reinstall Fedora 10 and just not update the nVidia graphics drivers? I have a 20" monitor that has a resolution of 1600 x 1050 and I would really like to take advantage of that.
View 14 Replies View RelatedI installed fedora core 11 on a dell inspiron laptop which has windows vista already installed on it. It shows that fedora is installed successfully and to reboot the system. When i reboot the system there is no grub screen and it directly boots windows.
View 5 Replies View RelatedI'm trying to install ubuntu alongside Windows 7 on a HP Pavilion DV3. When I reboot I'm given the option to either boot into windows or ubuntu (this is after running the wubi program from the ubuntu website); when I select ubuntu it says that the installation will continue but the screen then goes very dark like the brightness has been turned right down. In the center of the screen I can faintly see the word ubuntu. I've tried using the hot-keys on the laptop to turn the brightness up but this doesn't work. I've also tried installing from CD but his doesn't work either and I get the same problem. This is my first time installing ubuntu so I'm not familiar with how the installation process works. Also if any other details are needed I'll be happy to give them.
View 6 Replies View RelatedI installed fedora core 11 on my laptop (dell inspiron 1525), which has windows vista already installed on it. After installation it says that the installation is complete and please reboot the system. When I reboot it is directly booting into windows. The os selection screen is not shown.
View 9 Replies View Related