vsftp dose not work in my machine. I try to restart vsftp by command
Code: sudo /etc/init.d/vsftpd restart but it failed:
Code: Shutting down vsftpd done Starting vsftpd startproc: exit status of parent of /usr/sbin/vsftpd: 1 failed
I'm trying to get my vsftp server to run. When ssl is disabled it works pretty fine, but after turning on I get the following error:
[Code]...
I've experienced some problems with Dolphin. It crashed a lot, so hard that I've to reset the machine. I have a Vaio VGN SZ 750. Since OpenSUSE 11.1 it used to fail responding, or when I have to move a lot of files, it starts to slow the machine until I have to turn off or restart. I really don't like it as I like Konqueror, so I'd like to know if I can uninstall Dolphin and use konqueror as default. Can I use the camera, the digital-"reader" and the Nvidia card of my laptop? Any link?
View 5 Replies View RelatedI am using backtrak 4 because i wont to hack a wireless network and when i wrote iwconfig it dose not work. see this [url] and i am using dell laptop dell inspiron 1545.
View 4 Replies View RelatedI am trying to install opensuse 11.2 as DomU on a Host running also opensuse 11.2. When I use a file as destination everything goes well and the installation finishes with success. But when i install the DomU on an LV (Logical volume) with Yast, once the installation finished and the DomU restarts, I get the Error "Boot Loader didn't return any data"
I mounted the LV and I verified the presence of /boot/vmlinuz-xen, /boot/inirtd-xen, menu/lst etc ....
[Code].....
OpenSuSe fail to start if loading on fail safe following msg appears
blogd: no message logging because/var file system is not accessible
I have run defrag through XP
Just for information in case if it is important to start dhcpd and named: Sep 16 20:26:44 LINUX-SRV named[2417]: nss_ldap: could not search LDAP server - Server is unavailable Sep 16 20:26:44 LINUX-SRV named[2417]: nss_ldap: could not search LDAP server - Server is unavailable
Secondly Both config files in /etc/sysconfig set parameters to start in jail root but
[Code]....
Frostwire and Nicotine + they both have outdated RPM's for 10.x that dose not support 11.3. They have newer .deb files. What would I have to do to install a .deb file. Navigate to the file using CD (change dir) and then? Model: Toshiba L505-ES3045 (Intel i3, 4gb Memory, OpenSuse 11.3/Windows 7, Intel HD Graphics)
OS: OpenSUSE 11.3 Prior OS's: Mac OS/X11/Fink/Windows XP/Vista/7.
I have one machine (out of a couple dozen) that continues to refuse to allow "vncserver :1" to start. It is perfectly happy with :2 - :9 but tells me :1 is already running - yet ps tells me that there is no running
Xvnc instance.
What have I done here and how do I get that session back? I've cleared the /tmp/.X11-unix entries but that did no good. Could I have checked something in Yast that is launching an invisible session?
i am currently trying to install vsFTP onto my new linux server and btw i just started using linux today this is my first time using linux so i got the ftp installed good it got downloaded and everything then i went to open a port for my server for vsFTP i used this comand to open it "-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT" then i closed it by pressing ESC then :wq! and it brought me back to my comand line again so now when i try to start the ip table thing with the comand "service iptables start" then when i execute that comand putty respondes with this "Applying iptables firewall rules: iptables-restore: line 1 failed [FAILED]"
The install Guide im using: [URL]
I've been instructed to set up an sftp server this weekend. I was going to just use vsftpd b/c it's awsome, but then someone said it's supposed to use ssh. so here's my question:
Is Vsftpd the same thing as Sftp? is it the same openssh protocol for encryption and file transport? I've set up Vsftpd before and it just uses port 21, and it doesn't seem to ask all the same questions as ssh, so is it the same thing? or should/could I tunnel vsftpd through ssh?
I'm using openSUSE 11.1 and would like to authenticate vsftp users against a mysql database. The newest version of pam-mysql I can find is from 2005. I'm concerned about using something from what appears to be a dead project. Is there an alternative? I'm trying to come up with a solution where I can manage FTP users from an application running from Windows desktops.
View 1 Replies View RelatedI have three machines with the same configuration. ssh and SFTP enabled on all three and I can see all three from the network. I can also ping all three. Here is what I get with the ssh debug command on the problematic machine:
linux-csp7:/home/ines # ssh -vvv ines@192.168.2.19
OpenSSH_5.2p1, OpenSSL 0.9.8k 25 Mar 2009
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug2: ssh_connect: needpriv 0
[Code].....
when uploading a couple of files via ftp, it fails with
[code]...
But when performing this I got FATAL: Module capability not found. So what I'm using is openSuSE11.2 with 2.6.31.14-0.2-default kernel. Vsftp version is 2.0.7-5.2.1 How can I introduce this capability module into the kernel? Or do I not need it?
I have PDF printer on laptop, but not on work machine. Both using 11.2.How to install it on work machine (desktop)?
View 2 Replies View RelatedI have an appliance called my_appliance.raw. To start the appliance locally, I use:
[code]...
After that I would like to ssh into the guest from the host but just the ssh command doesn't work. firewall is disabled on guest. the ip I use is the one that ifconfig shows when I run it on guest. sshd is running.
I don't know if this is the right place to post this but here goes anyway.
System:
ASUS Pro50n Laptop
Distro: Arch Linux
WM/DE: Gnome
I've recently installed Arch linux with the gnome desktop environment, and everything is working fine apart from HAL and DBUS. I'm not sure why this problem is happening and I have no idea about any settings for HAL and DBUS all I know is what it says in the wiki.
The problem I have is that HAL and DBUS fail to start. I have tried /etc/rc.d/hal start and get the message BUSY.. then FAIL. I have tried /etc/rc.d/dbus start and get exactly the same. I have tried restart and that also fails. *EDIT* I have just tried /etc/rc.d/dbus start again without changing a thing and dbus has started successfully but HAL still fails.
The further problem, which I think is related to HAL not starting... possibly... Is that I can't watch DVD's / anything in the DVD drive. I can see it in Places >Computer as "CD/DVD Drive: 3_MEN_IN_ANOTHER_BOAT" but when I click to load it or if I open Totem and try and load it all I get is the error: Unable to mount location: Not Authorized. Is this related to HAL or is this a completely different issue?
*EDIT* fixed the HAL problem, reinstalled xf86-input-evdev package and it seemed to fix the problem. However I am still having a problem with watching DVD's
I type this 10,20,30,40,50 * * * * /root/auto.pl
my log file
Jun 23 10:10:01 localhost crond[7702]: (root) CMD (/root/auto.pl)
Jun 23 10:20:01 localhost crond[12022]: (root) CMD (/root/auto.pl)
Jun 23 10:30:01 localhost crond[14610]: (root) CMD (/root/auto.pl)
Jun 23 10:40:01 localhost crond[18676]: (root) CMD (/root/auto.pl)
Jun 23 10:50:01 localhost crond[22402]: (root) CMD (/root/auto.pl)
Jun 23 11:01:01 localhost crond[29476]: (root) CMD (run-parts/etc/cron.hourly)
but my application doesnt run at all. my script is in perl language
Over the past few days, I've noticed that administrative tasks sometimes fail to start. I'm asked to enter the administrative password, "Granting rights" appears in the bottom panel for a few seconds, but then disappears. I'm using Debian Lenny. This is only an intermittent problem, and if a task does fail to start, it will start on the next attempt. Tasks which have failed to start are:
*Launching Synaptic form the System menu.
*Launching a root terminal from the Applications menu.
*Launching Nautilus with root privileges from a terminal using gksu.
After coming across the following post, I thought maybe it was an issue with kernel 2.6.32-bpo.5-686, because I'd recently upgraded to that kernel too, but I'm advised that that isn't so.It was suggested that something else from backports might be causing the problem.
My dhcpd service get failed every time when I try to start it
1) Actually I have a lan connection which has a static ip network 192.168.10.0/24 and the pc to which is using the dhcpd has a ip address 192.168.10.1/24
2) And I have a internet connection wirelessly which has a network 192.168.2.0/24
Now I want to problem ip address in the network of 192.168.10.0/24
Here below is the configuration file of dhcp server:
# dhcpd.conf
#
# Sample configuration file for ISC dhcpd
#
# option definitions common to all supported networks...
option domain-name "example.org";
option domain-name-servers ns1.example.org, ns2.example.org;
# Use this to enble / disable dynamic dns updates globally.
#ddns-update-style none; .....
rhev-h starting NFS service why occur under issue message?
[root@RHEV ~]# /etc/init.d/nfs start
Starting NFS services: exportfs: can't open /var/lib/nfs/rmtab for reading [OK]
Starting NFS daemon: [FAILED]
[root@RHEV ~]# tail /var/log/messages
2010-12-23T09:32:20.507146+00:00 RHEV exportfs[7834]: can't open /var/lib/nfs/rmtab for reading
2010-12-23T09:32:20.562458+00:00 RHEV modprobe: WARNING: Could not open '/lib/modules/2.6.18-194.3.1.el5/kernel/fs/exportfs/exportfs.ko': No such file or directory
2010-12-23T09:32:20.562508+00:00 RHEV modprobe: FATAL: Error inserting nfsd (/lib/modules/2.6.18-194.3.1.el5/kernel/fs/nfsd/nfsd.ko): Unknown symbol in module, or unknown parameter (see dmesg)
2010-12-23T09:32:20.563344+00:00 RHEV nfsd[7838]: nfssvc: No such device
I have installed freeradius from repositories in both Debian and Ubuntu. I have built from source with 'fakeroot dpkg-buildpackage -b -uc' on both the official freeradius source code and the source provided by apt-src in both Debian and Ubuntu. On a normal install via aptitude there is no ssl-support, I understand this is because of license issues. Otherwise is works, but is of course useless in a wifi-auth setup. On a install from source code, after editing debian/rules and debian/control as recommended different places on the net, freeradius fail to start because of ssl error. Same on install via source code downloaded directly from [URL]... Anyone have a working ssl-enabled freeradius server running Debian or the likes?
View 1 Replies View RelatedI have installed fedora 13 , 86_64. and was working fine until now. The problem was that JEXEC service Froze while booting. So I removed it /etc/init.d. The next time when I booted ATD service Froze, so I removed it by the same way. Next it was the turn of CROND followed by KSM , KSMTUNED. Then came ABRT-DAEMON which I had to type a #yum erase abrt* command. Finally it came to the turn of SM-CLIENT. I don't know where it is or what it is. Didn't find quality posts on the internet. What the heck should I do and I dont want to do a reinstall.
View 14 Replies View Relatedsince it started i cannot launch software-center, vlc, emesene... they all stopped working... i checked the logs of synaptic to see if i removed a python package and i didn't. i tried selecting all python packages for reinstall, and it didn't help! i really don't want to reinstall ubuntu.
View 9 Replies View RelatedI configured httpd.conf. With ip, port 80 and specified the document path correctly. But service httpd restart shows httpd stop fail, httpd start fail.
View 1 Replies View RelatedI have a really weird one. This may be a putty issue, or it may be a config issue in Ubuntu. I've no idea who to blame. I have four machines involved in my little issue that has me scratching my head on where to even BEGIN to diagnose what is going on. The computer I'm attempting to connect to (For identification purposes, I'll call it the main machine) is running a relatively new install of KUbuntu 10.04, stock install of openssh daemon. ufw is disabled, firewalls are off, etc, and I can prove that later.
The machine acting odd is a Win XP 32 bit running Putty. Haven't had a problem until this reload of the previously mentioned machine. A Work machine that is running RedHad of some flavour. A Virtual Machine running a headless setup of Ubunto 8.04. Now that the introductions are over, here is a quick map of the machines that can successfully connect with. My major problem is that I cannot get SSH (And ONLY SSH) to work between the XP machine and the main machine.
Work -> Main = Works
Work -> VM = Works
XP -> VM = Works
XP -> Main = Fails
XP -> VM -> Main = Works
Main -> Main = Works (IE: "ssh localhost")
VM -> Main = Works
When I try to get the XP machine to connect to the Main machine, I get an error with Putty saying:
"Server sent disconnect message
type 2(protocol error):
baad service request ssh-connection"
I've changed Putty to try using SSH Protocol 1 only, but it says the protocol isn't installed on the Main machine, which is true. I've tried setting just 1, and it gives me the error, and I've tried setting it to "2 only" and it again comes up with the error. I went into /var/log as root on the Main machine, and did a "tail -n0 -f *" and then tried to connect, but nothing relevant shows up.
As for the proof that the firewall is disabled, three of the machines are working with Synergy, I am able to swap between all three of the machines without a problem, I can get to WebAdmin from the XP machine to the Main machine, and I can open a Samba share from the XP machine to the Main machine without a problem. This sounds like a protocol issue, but I can't see anything in WebAdmin that'll put me in the right direction.
When I was using polipo on Ubuntu, it automatically start at system boot.
Now I'm using opensuse, I installed polipo from the repository, however, I have to manually start it by using "sudo polipo". If root privilege is not given, polipo won't work correctly.
What should I do to make it start at boot automatically?
a friend told me to creat /etc/boot.local, with code...
reason my wireless is constantly failing. the only solution is a reboot but it will start to fail again. I use hp mini 210 ubuntu netbook remix.here is a log file
Mar 19 19:37:37 nicky-laptop NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Mar 19 19:37:37 nicky-laptop NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (
[code]...
I have a problem when trying to start Cyrus IMAP (on Ubuntu server):
#./master &
[1] 1171
[1]+ Exit 1 ./master
I got a message from /var/log/message:
May 18 16:26:44 ldap master[1146]: process started
May 18 16:26:44 ldap master[1146]: unable to setsocketopt(IP_TOS): Operation not supported
I am having a RAID5 with a spare(total 4 disk).then the steps which lead me to a problem:
1. i was doing I/O on the array.
2. i pulled out a drive manually. So the spare drive took care of the failed one and started rebuilding. then
3. in the, mean time i pulled out the power plug of my NAS box.
4. After power up i saw my array was not active(by -D command option of mdadm). then
5. i executed: mdadm --assemble --scan /dev/md0 it gave me
I checked into the linux source and found that bd_claim is a function inside fs/block_dev.c and it failing due to which lock_rdev function (calling bd_claim in md.c) is failing and we are not able to start the array.I don't know why my RAID is not live after power on.
Plese help atleast can i save my data?