when uploading a couple of files via ftp, it fails with
[code]...
But when performing this I got FATAL: Module capability not found. So what I'm using is openSuSE11.2 with 2.6.31.14-0.2-default kernel. Vsftp version is 2.0.7-5.2.1 How can I introduce this capability module into the kernel? Or do I not need it?
After few hours working I can connect to ftp.And download files from the server.But I can not upload file or create directory.I checked my configure file several time could not figure it out.
# cat /etc/vsftpd/vsftpd.conf
anon_world_readable_only=NO
anonymous_enable=NO
[code]....
I am testing my ftp server configuration.Anonymous download works , however anonymous upload does not.I am getting the following error message from both Windows and Linux 5.4clients : 553 cannot create the file.And i am running Fedore 12.
View 3 Replies View RelatedI've been instructed to set up an sftp server this weekend. I was going to just use vsftpd b/c it's awsome, but then someone said it's supposed to use ssh. so here's my question:
Is Vsftpd the same thing as Sftp? is it the same openssh protocol for encryption and file transport? I've set up Vsftpd before and it just uses port 21, and it doesn't seem to ask all the same questions as ssh, so is it the same thing? or should/could I tunnel vsftpd through ssh?
I'm using openSUSE 11.1 and would like to authenticate vsftp users against a mysql database. The newest version of pam-mysql I can find is from 2005. I'm concerned about using something from what appears to be a dead project. Is there an alternative? I'm trying to come up with a solution where I can manage FTP users from an application running from Windows desktops.
View 1 Replies View RelatedI'm trying to get my vsftp server to run. When ssl is disabled it works pretty fine, but after turning on I get the following error:
[Code]...
I've setup a Lamp Server for Testing, The Lamp Server is Up & Running on CentOs 5.5
I am now trying to setup a VSFTP server where local users can upload files to there home directory so that Apache can serve web pages straight from the directories of system user home/accounts giving users the ability to run their own web sites which are hosted off the main server [tutorial here: [url]
So far i have been able to serve/display index.html files from the users home directory [url] but so far i cant upload files to any user home directory, every time i try to upload a file with filezilla i get this error message: 553 Could not create file. Critical file transfer error
I have searched online for similar problems like mine and so far i've tried alot of the solution but none seem to work. I'm confused, dont know where i went wrong, i put the users in a group called ftpusers and here are the permissions on the users (test, ftpuser & testftp) home directory. have a look an tell me where i went wrong :(
Also the root directory where the web pages are served from is called public_html here are the permissions
Here is my vsftp.conf file can someone check it to see if i made any errors in there:
I am trying to upload a photo to craigslist from a NAS drive on my network but when I go to choose the file, the network resources are not listed in the file tree. Or maybe I am not looking in the right place? Take a look at the attached. This is what I see, but there should be something on the left pane that says "Network" so that you can access your workgroup shares.
I also attached a screenshot from my "files & folders" menu which clearly shows such a "network" option in the file tree. How come it's in one place and not the other?
I`ve the following internet configuration at home -
WORLD
to
ADSL modem in BRIDGE mode with DHCP
[code]....
All internet browsing function are ok, but when I try to upload file using sftp to a remote compute - it hangs. This is not a problem of remote computer. Download is working ok. I disabled firewall on wireless router but this did not help.
Have a pureftp server on OpenSuse 11.2 (x86-64 bit), KDE 4.3.5, dual core AMD. It responds to ftp clients on another machine (openSuse 11.1) within the same subnet (192.168....) and delivers lists of directories, changes directories, etc. The clients (gftp, jftp, filezilla, dolphin--tried them all) are unable to upload to the server (after a successful log-in on the server as a user, not root) with an error message that seems to indicate an inability to open the file on the client machine. Also logged in as user on the client machine. From FileZilla:
Command:STOR FCtinyLogo2.jpg
Response:553-Can't open that file: Permission denied
Response:553 Rename/move failure: No such file or directory
What am I missing in permissions? The directory where the JPG is located belongs to the user who is signed in, its in his home directory. The users on the two machines are not the same.
So up until I updated from Opensuse 11.3 to 11.4, I hadn't any issues with my network connection. At least none worth mentioning. Once I installed 11.4, I've had weird issues with varying lengths of connection. Sometimes I can't connect anywhere, sometimes I can only get to the router, sometimes I'm 100%. I'd fiddle with YAST until everything worked. I honestly have no clue whether or not anything I did had any effect.
Enough of the iffy history, here's what's happening now. For the past few weeks up until last night, I have been at 100% connectivity. I never turned off my computer until last night (it just shut itself off, like the cord was unplugged. I dunno what happened, maybe it was my foot, maybe the PSU. I think it has happened before.). When I turned it back on, I was only able to connect as far as my router (192.168.1.1, a D-Link Gaming router that has always been very good to me). I could not make it to my modem (192.168.0.1, a Quest DSL modem. Once I can get here, then usually I'm good to go 100%).
I tried again this afternoon, and no change. I then get the crazy idea to unplug the ethernet cable from it's PCI-card home and return it to the onboard port (which I long ago declared defunct). Immediately after plugging it into that port, I ran "ping 192.168.0.1" and I started getting returns. I open up Firefox and try to load an external page, and nothing happens. I go back to the console that I was pinging from, and it had stopped. I start pinging my router, and no luck. What I conclude from my little experiment is that the router is not at fault.
1. It did not change at all between being at 100% and being at 0% after reboot.
2. I was able to get returns from the modem, past the router, for a brief period of time while using the defunct ethernet port.
Since I never had these problems before updating to 11.4, I'm inclined to believe that it was the update that started these problems.
I have a problem with uploading any file to my Suse 11.1 with vsftpd. The active (not commented out) settings in my /etc/vsftpd.conf are:
dirmessage_enable=YES
chroot_local_user=YES
local_enable=YES
anonymous_enable=NO
syslog_enable=YES
connect_from_port_20=YES
pasv_enable=YES
listen=YES
ssl_enable=NO
And I added umask 022 to the user login script problem I have: I login with user and password that exists as a local user on my suse machine. I can read and download from my homedirectory, but I cannot upload with filezilla. Then I get the error: 550 permission denied critical file transfer error
I am programmatically doing a large FTP upload (about 5 Gb's of 2-3 Mb files) from my Windows 7 machine to a ProFTPd server on my Ubuntu box. When the program is run, transfer rates are huge! but as run time continues, transfer rates drop off significantly and eventually slow to a halt resulting in a:
Quote:
Read Timed Out
error.
The rest of the uploads fail due to Socket Read Errors.
Why is the transfer failing like this?
I finally have my system to where I can connect to proftpd but my uploads fail. I think my problem lies in the upload folder. I do not really understand where to put it. Will someone look at this config file and tell me where to put it and what I need to do to get it working. A basic anonymous configuration, no upload directories.
[code]...
I regularly check for updates via Update Manager. I have, as of today started getting errors, some updates did not upload.
View 2 Replies View RelatedTrying to install the Novell iprint client but got the following error message:
My system specifications are as follows:
I've just upgraded to 11.3 (64 bit) and the nfs client does not quite work. I have 3 mounts I try to make, and 2 out of 3 work. The third seems to mount, but shows an empty directory. There are no errors in /var/log/messages on the 11.3 client or the server. The only difference between the 3 mounts that I can see is that the failing mount is of an xfs system. The other two happen to be ext3. Is that visible to the nfs client? Or is that a red herring? I can still mount all 3 just fine from my other opensuse 11.2 systems.
For info, the server is running opensuse 10.3...
Code:
nas:~ # uname -a
Linux nas 2.6.22.19-0.2-default #1 SMP 2008-12-18 10:17:03 +0100 i686 athlon i386 GNU/Linux
My laptop, running OS114, crashed today b/c it ran out of battery. Apparently, apart from the partial loss of an important document, this has wreaked some part of OS.
I can connect to the network w/o problems i.e. I can access the router over it's IP.
I can not, however, open any site in any browser. pinging them does not work too.
the /etc/resolv.conf is blank up to the standard notes from the OS developers. That is, there are no relevant entries there.
I'm using KDE 4.5 with KNetworkmanager, but neither did I find any solution while looking through the menus of KNetworkmanager, nor in Yast "Network".
vsftp dose not work in my machine. I try to restart vsftp by command
Code: sudo /etc/init.d/vsftpd restart but it failed:
Code: Shutting down vsftpd done Starting vsftpd startproc: exit status of parent of /usr/sbin/vsftpd: 1 failed
Just having updated from SuSE 10.3 to 11.1 I'm struggling with some network issues. WLAN connection setup with Network manager worked, the connection comes up on login to KDE 3 and works for some time. All of a sudden, the wlan connection fails and reconnection via NM is not possible. The normal wired ethernet stays fully operational and connection is established at plug in of the cable. I tried to track the issue down by browsing through /var/log/NetworkManager but I did not find the answer. A rcnetwork restart brings back a fully operational network including wlan connectionvia NM.
Working connection fails, NM fails to reconnect:
Code:
Jan 6 13:04:30 mars NetworkManager: <info> (eth1): supplicant connection state: scanning -> associating
Jan 6 13:04:30 mars NetworkManager: <info> (eth1): supplicant connection state: associating -> associated
Jan 6 13:04:31 mars NetworkManager: <info> (eth1): supplicant connection state: associated -> 4-way handshake
Jan 6 13:04:31 mars NetworkManager: <info> (eth1): supplicant connection state: 4-way handshake -> group handshake .....
first added the kolab openSUSE11.2 repo
Index of /repositories/server:/php:/applications/openSUSE_11.2
then while trying to install kolab, I got following error
# zypper install kolab
Loading repository data...
Reading installed packages...
'kolab' not found.
Resolving package dependencies...
Nothing to do.
[Code]...
I have a Huawei E173u-2 mobile broadband usb stick. It is recognised as a gsm-modem and shows up as such in the networkManager-plasmoid. I have set up the connection details for my ISP (O2), but I can't connect. When I click on the connection, "signal strength" is shown as well as "operator" (o2 - de). The "connection state" changes to "Preparing to connect", then "Setting network address". Then the modem vanishes and comes up again a few seconds later.
Here is the log (/var/log/messages):
Code:
It seems like there is a connection for about 5 seconds, then the modem hangs up and restarts .
The stick works fine with our windows netbook, so I don't think it is a hardware failure.
How do I get this working?
My system:
opensuse 11.4
kernel 2.6.39-30-desktop (2.6.38 gives the same error)
kde 4.6.3
plasmoid-networkmanagement 0.9.svn1192577-168.6
Have just installed 11.4 Linux 2.6.37.6-0.5-default. I find that saving data does not enter the folder. Attempting to file once more, the folder selected shows that data is already there and gives the option to overwrite. Closing the folder and reopening again, data has still not transferred. Only after rebooting does the data appear. I am wondering whether I have insufficient RAM (512K)
View 1 Replies View RelatedWhen we try to login using KDE we get the following error
"kstartupconfig4 does not exist or fails. The error code is 3. Check"
If we use IceWM GUI login works fine.
I have installed Vbox on 2 systems running Opensuse 11.3 and both have experienced knetworkmanager failure. Knetworkmanager failed after a failed wake up from sleep mod, which also had been working perfectly until this failure. I am wondering if the vbox kernel modules could be causing this isssue. To temporarily fix the problem I am running my network connections through yast networks setting . (which uses the traditional ifup method and everything is working)
View 3 Replies View RelatedHaving just installed OpenSuse 11.3, NetworkManager identifies my wireless network, but repeatedly fails to make a connection. Without further ado, here are the outputs to commands requested in the first sticky thread:
[Code]....
I've spent two days trying to get this to work to no avail.here is the output of a recommended diagnosis script to start.[URL]
short version is ...
!!! CND0120E: Network card ra0 has no IP address
!!! CND0490E: No access point with your SSID detected on interface ra0
[code]....
I just installed Fedora12 in a Core i3 machine... everything looks fine, but I have a huge problem... every time I upload a file (using ftp or sftp) some wier characters are included inside the file... for example.
[Code]......
I run:
Linux 2.6.27.48-0.3-pae i686
openSUSE 11.1
KDE 3.5.10
When I attempt to determine who's in the samba database or enter a new member in the file I get the following: No builtin nor plugin backend for tbdsam found PANIC (pid 8201): pdb_get_methods_reload: failed to get pdb methods for backend tbdsam
[Code]....
I attempted to upgrade from the software.opensuse.org website with samba-3.60-10.1.i586.rpm. I get a message: Nothing provides cifs-utils needed by samba-client-3.60-10.1.i586.rpm. So I could not upgrade. There are other upgrades on the site but they are not available for some reason. What is an appropriate upgrade? Is upgrading the solution? If not then what?
I am attempting a Network installation of openSuse 11.3 on an old desktop which has IBM Boot Manager so that I can boot to one of three OSs, openSuse being the third. Sadly the installation of openSuse fails before the CD initial boot has finished. Looking at the text log of the starting process the problem appears to be a driver and the last line of text where it stalls refers to eata driver.
There are 4 hard drives in the machine, configured as two RAID 1 arrays driven by a DPT 2144W hardware raid card. (Very old but very good). If I Google eata I get a good deal on SCSI raid and DPT cards but I am out of my depth when they say a kernel module is needed.
Another concern is that the RAID arrays are configured using a bootable DOS configuration disk and once this is done they are recognized by other OSs such as eCS and OS/2. The arrays are just treated as single drives so these OS installations do not interfere with the card configuration. I am concerned because I cannot afford to lose the data on the drives but it appears the linux driver might want to rebuild the arrays.