OpenSUSE Network :: Machine Refuses To Allow VNC Server 1 To Start

May 24, 2010

I have one machine (out of a couple dozen) that continues to refuse to allow "vncserver :1" to start. It is perfectly happy with :2 - :9 but tells me :1 is already running - yet ps tells me that there is no running
Xvnc instance.
What have I done here and how do I get that session back? I've cleared the /tmp/.X11-unix entries but that did no good. Could I have checked something in Yast that is launching an invisible session?

View 4 Replies


ADVERTISEMENT

OpenSUSE Network :: Knetworkmanager Refuses To Start?

Sep 8, 2010

All of a sudden the Knetworkmanager icon disappeared from my panel and when I try to start it from a console I get the following output.

ion@linux-4cfs:~> knetworkmanager
terminate called after throwing an instance of 'std::bad_alloc'
what(): std::bad_alloc

[code]...

View 8 Replies View Related

OpenSUSE :: Gparted Refuses Sometimes To Start / Solve This?

Oct 17, 2010

If I try to start gparted, sometimes it works fine, other times, it throws this error:

Code:
Could not initialise connection to hald.
Normally this means the HAL daemon (hald) is not running or not ready
I have tried manually starting hal daemon,but nothing happens.

View 2 Replies View Related

Server :: Apache Refuses To Start Using PerlModule And Virtual Host

Nov 12, 2009

I'm trying to install two instances of OCS Inventory on the same machine using virtual hosts in apache. The apache configuration for it is in it's own file and it works fine without any virtual host. If I add it apache refuses to start without giving any error message. I narrowed it down to some lines loading perl modules, and if I comment them away apache will start again. Some of the modules work, but some of the ones specific to OCS Inventory will not work. I can't understand what the difference is between loading it in a virtual host or not, it doesn't make any sense to me!

View 2 Replies View Related

Server :: RAID5 Refuses To Start After Yanking Drive From SCSI Bus

Mar 23, 2010

I am setting up a new server and am in the midst of testing RAID. This is an Ubuntu 9.10 server. RAID1 (/dev/md1) is spread across 12 one-terabyte SCSI disks (/dev/sdi through /dev/sdt). It has four spares configured, each of which are also one-terabyte SCSI drives (/dev/sdu through /dev/sdx). I have been following the instructions on the Linux RAID Wiki ([URL]....

I have already tested the RAID successfully by using mdadm to set a drive faulty. Automatic failover to spare and reconstruction worked like a champ. I am now testing "Force fail by hardware". Specifically, I am following the advice, "Take the system down, unplug the disk, and boot it up again." Well, I did that, and the RAID fails to start. It outright refuses to start. It doesn't seem to notice that a drive is missing. Notably, all the drive letters shift up to fill in the space left by removing a drive. The test I did was to:


[code]....

Is removing a disk from the bus a reasonable test in the first place? Meaning, is this likely to happen in a production environment by other means than a human coming by and yanking out the drive? Meaning, is there a hardware failure that would replicate this event? Because, if so, then I don't know how to recover from it.

View 1 Replies View Related

OpenSUSE Network :: Mulit Server Setup \ Server Machine Has No Internet?

Mar 27, 2010

I want to set up the following server in open suse:dhcpopenldapnfs (to allow users to mount their home directories from the serverI started off with the openldap server. I configured it with dc=localdomain,dc=local as its domain. As the server machine has no internet. Though when I go to add a .ldif file with the following command

Code:
ldapadd -x -D 'cn=Administrator,dc=localdomain,dc=local' -f /home/base.ldif -W
It returns this

[code]....

View 9 Replies View Related

OpenSUSE Network :: Setup A Samba Server On 11.2 Machine

Apr 15, 2010

I set up a Samba server on my openSuSE 11.2 machine and I can connect to it locally with the local ip and with my actuall ip. My friend however cannot. I tried to have him ping my ip and that wouldn't even work. I'm confused and wondering why it doesn't work. We share a lot of files and this would make both of our lives much easier.

View 9 Replies View Related

OpenSUSE Network :: Set NFS Server On 11.3 / Cannot Mount A Directory Of Machine On Another?

Apr 5, 2011

i have a suse 11.3 machine and i cannot set it to be a NFS server that is i cannot mount a directory of this machine on another one running as well a 11.3 while i can mount without problem a directory from 10.0.i do not know where to start as the NFS server option seems to have vanished from YAST.

View 5 Replies View Related

OpenSUSE Network :: NFS Client Machine Freezes After Server Drops Off?

Jun 16, 2009

I have a 11.1 NFS server and several 11.1 NFS clients. If for some reason the server shuts down before the clients then the clients become almost frozen, particularly KDE is rendered useless even after cycling back to init 3 then init 5. I would like to make the clients immune to shutdowns on the server.

View 3 Replies View Related

OpenSUSE Network :: Getting Error Message - Pc Refuses To Allow Remote Connection

Sep 5, 2011

I have local and remote networks that have various printers. I can add any printer (local or remote) to any PC, except for one PC that's refusing to allow remote connection (it used to, but doesn't now!). The problem PC has two printers connected and work OK as a local printer, but both display same problem when attempting to connect from any remote PC via YaST. Using 'Connection Wizard> CUPS Server' connection method requires IP address of remote PC and printer name. But if I correctly select either of the two printers I get an error message:

"PING 192.168.1.149 (192.168.1.149) 56(84) bytes of data.
64 bytes from 192.168.1.149: icmp_seq=1 ttl=64 time=1.12 ms

Both printers are set to 'Accept Print Jobs' and 'Share Printers> Allow remote access' permits all networks to connect. why this PC is requiring the root password?

View 6 Replies View Related

OpenSUSE Network :: Can't Start NFS Server With GSS Option

Feb 24, 2011

I can't start NFS Server with GSS option.I've added [URL] (example) principal via kadmin with -randkey option as mentioned at "6.4.8. Creating Kerberos Service Principals".After executing rcnfsserver start, /var/log/messages shows:"do you have a keytab entry for nfs/<your.host>@<YOUR.REALM> in /etc/krb5.keytab?"

View 2 Replies View Related

Software :: Samba Refuses To Start On Startup - But Will Start Manually

Apr 14, 2009

I just moved my / from sda1 to an ide drive, hde1. i dont see how this could have caused any of these issues, but it did.

First my network card failed to start. i added a line in my rc.local file (where i put all of my additional programs, etc i want to start):/etc/rc.d/rc.inet1

The above now starts my network card with my static ip configured. dhcpcd also worked but i wanted this static.

Now samba will not start. i have the following line in my rc.local: /etc/rc.d/init.d/samba start

This used to work just fine. at first i thought that samba may be trying to start before my network card gets an ip, but the line is *after* the network startup line. just to make sure, i made an additional script called startsamba which contained a sleep 60 followed by samba start, to delay the startup of samba even further.

The message samba reports is very vague, something like failed - core dumped. most of the core dump log is garbage characters, but here is the beginning which seems like it might contain some info:

Code:

ERROR: Can't log to stdout (-S) unless daemon is in foreground (-F) or interactive (-i) after the system starts, i can drop to a console and type "/etc/rc.d/init.d/samba start" and the service starts just fine. i've also tried starting samba manually with "smbd -d" which also produces the core dump when started from rc.local, but not when started from a console after startup.

View 8 Replies View Related

OpenSUSE Network :: Start MySQL Automatically When The Server Reboots?

Mar 20, 2010

I installed and configured mysql 5.0 on my opensuse 11.1 box. But I have no idea how to get it to start automatically when the server reboots.

View 3 Replies View Related

OpenSUSE Network :: Help_no Interfaces Shown In Yast-firewall - Dns Server Won't Start

May 1, 2010

This morning I was configuring a DNS server through Yast at home, I've done it once before (in another wireless lan)and it works perfectly. But this morning, after I clicked "start dns server now", everything freezed, and caps lock light on keyboard kept flashing. I rebooted laptop,it couldn't boot into run level-5 and there were few "skipped" items and "failed" items displayed.... Sorry I'm new to linux so I re-installed it this afternoon, and kept /home partition, formatted / partition.

Everything seems to be fine after re-installation, again I tried configuring a DNS server and clicked "start dns server now", but the same problem appeared, caps lock light kept flashing and I rebooted the laptop but fortunately this time it didn't fail on any items when booting

In Yast-Network Settings, I choose "use controlled with network manager", and I can connect to wireless router and browsing web, but there are no any interfaces shown in Yast-Firewall, and this time, after I clicked "start dns server now", nothing happens, dns server just won't start...

View 7 Replies View Related

OpenSUSE Hardware :: Getting Nowhere With Nvidia X Server - Just Refuses Point Blank To Save Config

May 27, 2011

trying to enable the nvidia drivers because i wanted to use Gnome 3 and had zero luck. So once i read that suse was a better bet i installed that. the nvidia drivers have installed fine and i can get my required resolution of 1440x900 if i use an old saved xorg.conf file i managed to randomly cobble together a few years ago .. this is it ..

Code:

File generated by XFdrake (rev 247269)
# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************

[code]....

View 5 Replies View Related

Ubuntu :: After A Reboot One Of The Hard Drives On Machine Refuses To Mount?

Feb 5, 2010

After a reboot (why did I do that???) one of the hard drives on my machine refuses to mount with the following message:

Code:
mount: wrong fs type, bad option, bad superblock on /dev/sdd1,
missing codepage or helper program, or other error

[code]....

View 13 Replies View Related

OpenSUSE Network :: New Dual-boot Machine Has Poor Network Performance

Jul 27, 2011

This is a thread I've moved over from the install forum and is hopefully more focused. Sorry if I have violated some protocol. Problem I have a new machine build configured to dual-boot Windows 7 and OPENSUSE 11.4. Network performance in Windows is very good but network performance in OPENSUSE is very poor.

[Code]...

View 4 Replies View Related

OpenSUSE Network :: Network 11.3 - Connection Refused When Try To Connect To SSH From Another Machine

Sep 27, 2010

I installed OpenSuSE 11.3. The only "extra" package I put in after the install was VirtualBox-ose. The firewall is disabled. I gave the machine a static IP address. I can get to the Internet from the machine. I enabled sshd to start on boot with "chkconfig sshd on" and also verified the service is running on the machine. I can ssh user@localhost from the machine as well.

When I try to connect to SSH from another machine, I get a connection refused. I verify that the firewall is down. I also try to get to VNC -- same problem: Connection refused. I ping the machine for fun. If I try to SSH again, it sometimes gives me a logon? I would check the server logs for the connection refused, but I wouldn't know where to look. I started in /var/log/messages, but nothing seemed to jump out there. I also find it strange because I can RDP to a windows guest running under VirtualBox. The Windows guest uses Bridged Network and DHCP.

I also find it interesting that I sometimes type a "ping google.com" from the 11.3 box and it will just hang - no output. Then I open firefox and get to the internet. All of a sudden, ping starts to give output. Could this be a neetwork card issue? A configuration issue? I don't know where to start.

View 1 Replies View Related

Ubuntu Servers :: Networking - Machine Refuses To Give Access To The Internet Via Firefox

Sep 21, 2010

I have a machine (lets called it machine 1) with two networks card, eth0 and eth1. Both have static IPs. Once in a while the machine refuses to give access to the Internet via Firefox (eth0 is the route to router). Other machines on the network have no problems accessing the Internet. Eventually the machine would just magically start working again, but this time it just seems to have stayed broken. I've done some simple diagnostics and found:

a) I have another machine running Apache with a Wiki on our network - [URL]. Machine 1 is unable to connect to this Wiki. I get 'the connection has timed out'. I can ping 192.168.1.73 and it responds in the usual fashion.

b) If I try to ping www.google.com it times out with: ping: unknown host www.google.com. I can ping google using its IP address.

c) On machine 1 I have tried traceroute on both www.google.com and its IP and I just get:

1 * * *
2 * * *

And so on until hop 30. Doing this on any other machine on the network works. So while it seems I can ping internally in our network and outside, but when it attempts anything traceroute or URL related it does not work.

View 7 Replies View Related

CentOS 5 :: Start A Virtual Machine (VB) When Server Is Turned On?

Apr 7, 2011

I need start a virtual machine (Virtual Box) when when my server centos is turned on or start.

View 6 Replies View Related

OpenSUSE Network :: Connecting To A Network On 11.3 On A Virtual Machine

Sep 28, 2010

Recently loaded 11.3 onto a virtual machine, however none of the network settings will allow me to connect to the internet. First time Ive had this happen, other distro's Ive experimented with connected with no problems. I recall seeing a similar topic some time ago (dont remember if it was here or another forum), but at the time, there had been no fix. Anyone know if this has been fixed?

View 5 Replies View Related

Fedora Servers :: Proftpd Refuses To Start - F8

Nov 3, 2009

Proftpd has been running OK until recently, when I tried to connect using my laptop. All I get is the proftpd-socket file under /var/run/proftpd/ I cant' find any log files with error messages in them. I have checked /var/log/messages - nothing in there either. I have rebooted the machine after re-installing proftpd. Still it wont start Is there any way to find out why proftpd has decided not to start any more?

View 4 Replies View Related

Ubuntu :: Opera 10.60 Refuses To Start From KDE Menu

Jul 5, 2010

After upgrading to v10.60, Opera will not run from the KDE menu. A entry appears in the taskbar and then disappears without opening any window. The entry for Opera in KDE menu has this command:

Code:
/usr/bin/opera %u

If I open a terminal and type "opera" or navigate to /usr/bin and click on the opera script there, it starts up just fine. Seems like it should be simple to fix, but I have tried various entries in the KDE menu ("opera", "opera %u", "/usr/bin/opera") and this same behavior occurs with any of them.

View 4 Replies View Related

Ubuntu :: OO Write Crashes Today And Now Refuses To Start?

Jul 7, 2010

OO write crashes today and now refuses to start. strace gives:

Code:
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb772e000
set_thread_area({entry_number:-1 -> 6, base_addr:0xb772e8d0, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}) = 0
mprotect(0xdef000, 8192, PROT_READ) = 0

[Code]...

View 5 Replies View Related

OpenSUSE :: Vsftp Dose Not Work In Machine - Fail To Start

May 24, 2011

vsftp dose not work in my machine. I try to restart vsftp by command

Code: sudo /etc/init.d/vsftpd restart but it failed:

Code: Shutting down vsftpd done Starting vsftpd startproc: exit status of parent of /usr/sbin/vsftpd: 1 failed

View 9 Replies View Related

OpenSUSE Network :: Susie 11.4 Network Manager Doesnt Start At Bootup

May 22, 2011

I am using an Acer Aspire 5536 AMD dual core laptop with a 64bit installation of Susie 11.4. Using 11.2 I had no problems connecting to the wireless router. As soon as 11.4 was installed, clean install, and the laptop rebooted, network manager failed to start, until manually invoked and then enabling networking through the system tray. Even after this it will not connect to a wired or wireless network sometimes for more than 30 minutes.

View 9 Replies View Related

Debian Multimedia :: Compiz Refuses To Auto Start Properly (with Gnome)

Apr 16, 2011

How to get compiz to auto-start. What seems to be the generally accepted method (from what a few google searches and the debian wiki tell me) of using gconf-editor and changing the window manager from 'gnome-wm' to 'compiz' in desktop > gnome > session > required_components doesn't change anything. The only method I found that did not involve using a terminal and running 'compiz --replace' every time I boot the computer was to add compiz and fusion-icon to the gnome startup apps, but this causes unwanted flickering (it starts metacity and then replaces it with compiz, ie it's simply automating what I would do with the terminal). Autostarting the fusion-icon alone does not start compiz, although it allows me to start it from it's menu if I right click the icon. Note that I sometimes use fluxbox as well, so starting it on boot isn't really an option either.

Perhaps this can be useful :
compiz:
Installed: 0.8.4-4
Candidate: 0.8.4-4
gnome-session:
Installed: 2.30.2-3
Candidate: 2.30.2-3

View 5 Replies View Related

OpenSUSE Network :: Start Network Interface At Virtual Terminal

Mar 1, 2010

I would like to use zypper to update openSUSE 11.2 through the Virtual Terminals (tty1 thro' tty6).

Network Interface is wlan0 (Wireless LAN, home network through a Router) that requires a password using WPA2.

My question is how to start wlan0 through the command-line ?

View 9 Replies View Related

OpenSUSE Network :: Cannot Start Network Manager - To Configure My Wlan ?

Nov 27, 2010

I have just installed opensuse 11.3. I am absolutely new for Linux and for this forum. I have tried to open Network manager to configure my wlan. But its not starting. How to start network manager and configuring my wlan.

View 4 Replies View Related

OpenSUSE Network :: Network Management Disabled After Start On 11.2

Dec 19, 2009

I tried connect to internet through iPhone (bluetooth tether), so I followed one tutorial... It said I have to change "networkmanager" to "ifup" in yast>network settings, and make some other changes... I did it, but I couldn't connect via iphone... OK... I put back all changes, also changed ifpu to networkmanager.

After reboot, Knetowrkmanager gives me "network management disabled" on startup, instead of list of my networks.

Of course, I google for solution, but without any luck. And then, I don't know why, I killed Knetworkmanager, start it again, and.. it worked!

But now, I have to kill it, and start again always, when I reboot my laptop...(HP Compaq 6720s, BCM4312, KDE 4.3.4)

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved