OpenSUSE :: K3b Decided To Give DVD Capacity Immediately?
Nov 13, 2010
First of all, this isn't really a problem for me, but I'm just curious. In the past when I started a data CD project, I remember that k3b used to start me with a "blank CD" of 700MB and then expand to a "blank DVD" of 4.4GB when the amount of data exceeded the capacity of a CD. Normally I just make an ISO image for the CD and burn on another machine (for a reason not relevant here).
Today, it started me off with a "blank DVD" right away. It's not a problem because the ISO format isn't different and the data is under 700MB anyway. How come? Ah wait, I think I know what it is, there's a DVD+RW in the drive at the moment so k3b got too smart and assumed that I wanted to write to it, even though I selected Create image only.
View 1 Replies
ADVERTISEMENT
Dec 31, 2009
I am writing some server programs. I notice that I can only connect to the server with a total of 28232 connections (clients) before I get the errno [99] "Cannot assign requested address" from the client program. I am using the same machine to do both operations. It seems like I am reaching some networking limitation outside of both programs.The server process has a maximum of 6 theads running(well below the thead limit). The client has two threads. When I add another client machine to the testing I can surpass 28232 connections). What limitation am I reaching on the server machine and how can I overcome this limitation. Again when I add a client machine to the testing, I can achieve more than 28232.
System Setup:
SUSE 11.1 64 bits
ulimit nofile=150000
View 7 Replies
View Related
Nov 26, 2010
I had a dual boot system with Ubuntu and Mint. I needed more space on the HDD and decided to remove Mint.This went well and I now only have Ubuntu on the HDD. The problem is that when I boot up I still get the selection to choose whether I want to boot with Ubuntu or with Mint. I now want to remove this option from the boot list so that I can boot directly into Ubuntu automatically.
View 2 Replies
View Related
Mar 17, 2010
I am trying to run VNC server on a standard OpenSUSE 11.2 Gnome Desktop installation.I have done this succesfully with SLES for sometime, however, my experience with OpenSUSE 11.2 is that it doesn't work out of the box!!
I am using XP Pro VNC viewer Free Edition 4.1.2 to connect.
I have removed "localhost" from the # special IPv6 addresses in hosts. This fixes the black screen issue for me. All appears well until I disconnect and retry the connection after 5 minutes or so. Then VNC client makes the connection and then immediately disconnects. It's a no go from then on. If I reboot OpenSUSE 11.2 it works again but then reconnect fails again after the same period of time.
I am trying NX now as an alternative. However, I would much prefer to use VNC.
View 9 Replies
View Related
Jan 8, 2011
I have Suse 11.3 KDE and every time I opened an mp3 file, Amarok opened and closed immediately reporting a new bug everytime. So I followed this thread Amarok Not Launching I have uninstalled Amarok through Install/ Remove software. But I am not able to find this folder to delete, as mentioned in above post: Delete the directory ~/.kde/share/apps/amarok
View 9 Replies
View Related
Mar 16, 2011
Just upgraded from 11.2 and after some trials and tribulations with my video driver I'm almost fully functional.When I start Sketchup it dies immediately with the following error:~> wine C:\Program Files\Google\Google SketchUp 8\SketchUp.exeerr:seh:raise_exception Unhandled exception code c0000094 flags 0 addr 0xf778515a
View 1 Replies
View Related
Apr 24, 2011
When I am trying to start Tuxmath, it only show the initial screen for a second or two, and shuts down. From the console I get this error message:
[code]...
View 2 Replies
View Related
May 10, 2011
I have just installed openSuse 11.4 on my Acer Aspire 5738Z. When I click on the action button included in the bottom panel, I expect to open a windows asking me if I want to shut down, restart, or log off. But unfortunately, when I click on it, I am not offered any option and I get immediately logged off. I removed the button from the panel and installed it again, but it still dysfunctions.
View 4 Replies
View Related
Jul 1, 2010
I installed openSUSE 11.2 on my Compaq 2170US laptop. When I select it from the grub menu, everything acts normally until the login screen, which freezes immediately (i.e. before I can select my user account or type in my password).I installed from the full openSUSE DVD and chose the GNOME desktop. Before installing, I took openSUSE for a test drive with the GNOME LiveCD and everything seemed to work fine.
View 4 Replies
View Related
Jan 18, 2011
Running Ubuntu 10.10. I was trying to get mythtv going and in my infinite wisdom decided to reboot to fix a install problem. Anyway now I get a "windows classic grey" login prompt - which seems to be a symptom of the more serious next problem: My desktop is black, mouse is black, taskbar exists but I only see the clock. No desktop icons etc etc.
View 1 Replies
View Related
Apr 7, 2010
I am trying to introduce a bar code scanner to Red Hat Ent 5 OS based Box, since the PC is brand new and manufacturer decided not install serial port any more instead I have 5 USB port 1.0v. Unfortunately the scanner device give output on serial port which is incompatible to computer's USB port.I try using converter USB to Serial and Serial to USB; but all efforts are avail and NO reading I can capture in to Linux box. I wonder if any one has configured Bar-code Scanner which has serial port while computer has USB port PLEASE enlighten me if you can
View 2 Replies
View Related
Feb 22, 2011
I have used audacity occasionally since... well, since ever. I grew annoyed by a very uncommon way to do the things, and for the occasional bug of the day (varying the bug depending on the concrete day, that is).
After I awoke in the morning to continue the editing, it seems that audacity decided not to be able to open the file it saved 5 hours ago (not much time to sleep, you see). I am looking for a piece of software that can do basic wave editing. I really don't need jack, ardour, rosegarden nor anything like that. I only do wave editing, and as said very occasionally.
So, is there any other wave editor that I can use instead of audacity? I don't even need it to be able to open the audacity .aup files. I will re-do the work if needed.
View 7 Replies
View Related
May 25, 2011
I'm trying to give my computer (has ethernet wired cable connected to router) a static IP but it's not working. (BTW, I'm using ifup not network manager)I give it 192.168.1.8 and 255.255.255.0.Host-name I leave as they have it (it's the name of my computer). Click OK, accept and it all says it went through but now I can't ping anything. If I change it back to DHCP, I can ping again. What am I doing wrong?
View 6 Replies
View Related
Aug 9, 2010
I have installed Audacity from Packaman repo, because one from opensuse repo has no mp3 support. Now when I do zypper dup I get offered to upgrade Audacity and change vendor:
[Code]....
However, I would like to stick to Packamn repo. I have tried to change Packan repo Priority from 99 to 120, but I still get the same offer. If I protect the Audacity in Software Management, I will I be able to upgrade to new version of Packamn's Audacity if it hits repo in future?
View 9 Replies
View Related
Sep 29, 2009
I can't seem to give myself audio permission. What is the command that lets me add myself to a group so that I may be able to use alsa?
View 2 Replies
View Related
Sep 30, 2010
On Opensuse 11.3,a normal user could not access and modify files in other partitions as the default setting .Is there any way to give a permission to a normal user to do these things instead of do these as a root user?
View 9 Replies
View Related
Mar 15, 2011
I have installed opensuse 11.4 couple of days ago. Installation went smoothly. Everything is working just fine except the screen resulation. My Monitor supports up to 1366*768. The Display Settings in 11.4 gives option of 1366*768, But whenever I maximize any window (say firefox, opera etc) I can not see the close button & scroll-bar. Here is my xorg file of monitor.
[Code]....
View 9 Replies
View Related
Feb 12, 2011
Is it possible to give user only FTP access / browsing rights for certain directory within /srv/www/htdocs and prevent same user to browse all other directories, even user's /home directory on that server?
View 8 Replies
View Related
Jun 5, 2011
I am using Suse 11.4, with the Gnome desktop. I have downloaded the VLC player, but cannot work out how to make it play CDs in the CD drive. Right clicking on the Audio Disc icon that appears on the desktop whenever I load a disc doesn't give me an option to Play using VLC. Is there a way to make VLC the default player for CDs?
View 9 Replies
View Related
Sep 6, 2010
I have a 650 GB ext3 LVM partition with RAID 1 on. The partition is 85% full, but the system says "no space left on device" - where did the 15% go?I ran "tune2fs -m 0 /dev/mda1", so it is not the space reserved for the root - so Nautilus reports the same free capacity as GParted now.Some more info:- Ubuntu 9.10 x64- GParted says 650 GiB, 104.83 GiB free- Nautilus says 104.8 GiB free- The system thinks the disk is completely full - I cannot even create (touch) a new empty file
View 9 Replies
View Related
Apr 25, 2011
I can use dvd+rw-mediainfo to report the capacity of a loaded blank recordable DVD. Does anybody know of an equivalent program for CDs?
View 10 Replies
View Related
Aug 3, 2010
What is the maximum amount of ddr that can be installed in a 64 bit ubuntu linux system computer?
View 1 Replies
View Related
Apr 20, 2010
Just rebuilt my file/print server using an ECS 945GCD-M Atom motherboard. Running it under 9.10 (2.6.31-20) using the same cable and port on my Netgear switch that my old server connected to at 1GB/s without issue (old server's NIC was Intel-based).
Found the driver is an AR813x, & downloaded & installed the latest driver from here (1.0.1.9). sudo lshw -C network now shows that it's using the new driver, but still sitting at 100MB/s:
Code:
*-network
description: Ethernet interface
product: Attansic Technology Corp.
[Code].....
I can't seem to get it to come up at the full 1GB/s. I also tried ethtool -s eth0 speed 1000 without success. why networking restart ignores eth0?
View 1 Replies
View Related
May 28, 2010
my laptop battery capacity has gone low due to constant charging or whatsoever reason. previously it was at 62% and within 2 months its gone down to 32%. I use the laptop atleast for 18hrs every day. so is ther any solution to prevent my battery from losing the capicity.
i use dell studio 15 laptop, with 3 gigs of ram, lithium ion battery(56Wh), ati card, using compiz, p8600 processor. i use this for app development and for listening to music and videos.
View 2 Replies
View Related
Jun 15, 2010
I've recently completed a fresh install of 10.04 on a home file server and upgraded the hard drives in my storage array. My PREVIOUS hardware was:
Old version of Ubuntu (I forget which one exactly, but I know I had missed a few upgrade cycles)
3X 500 GB Seagate Baracuda's (for the array)
Areca 1220 Hardware RAID controller
Intel Core 2 Duo 6600
320 GB Seagate for the boot drive
I was running that hardware for about five years or so and it was rock solid. After the upgrade the hardware specs are:
Ubuntu 10.04
Areca 1220 hardware RAID controller
4x 1000GB Samsung
Intel Core 2 Duo 6600
320 GB Seagate for the boot drive.
The fresh install of Ubuntu 10.04 went remarkably well. The drivers for that raid controller are in the kernel, which is great. I was able to access the old array after upgrading Ubuntu. Now I am trying to create a new array with the four 1000 GB drives in a RAID 5. Obviously that gives a maximum storage capacity of 3 TB, greater than the 2 TB threshold that seems to be so important. I've been doing some digging and here is where my questions start:
it appears as though gparted doesn't support file partitions greater than 2 TB, correct?
it also doesn't seem as though parted supports ext3 or ext4, is that correct?
If this is the case, how do I create a partition with ext4 that is greater than 2 TB?
I can see the array volume in gparted (which is a relief) but it lists the size as 2.73 TiB, which I find curious because that is over 2 TB, but not the full capacity of the volume. I can also get to the volume in parted. But I see in the parted documentation that using the makepartfs command is discouraged and instead, one should use the command mkpart to create an empty partition, and then use external tools like mke2fs ( to create the filesystem.
how to proceed from here. What does the community think is the best course of action to create a partition of 3TB in ext4? Then I need to change fdisk to automatically mount the array at every log in, right?
View 8 Replies
View Related
Aug 17, 2010
I have window 7 and Ubuntu 10.04 on my laptop.As you know if I extend the capacity of my ubuntu partion in window, I will lose ubuntu and I should reinstall it.I want to know if there is a way for extending my ubuntu partition from 20 Gb to 30 Gb without loosing ubuntu and windows?
View 3 Replies
View Related
Sep 25, 2010
I have an 8gb sandisk cruzer flash drive that I wanted to remove the U3 software from. I used with this:and ran it on my windows machine because wine didn't work for itbut after it removed U3 my card only had 3.8gb. Is there any way to restore it back to 8gigs?I've already tried reformatting with the disk utility and it just doesn't give me the option to format higher than 3.8gb.
View 4 Replies
View Related
May 18, 2011
1 Areca controller 1222 divided into 2x250Gb in RAID 1 for my Ubuntu installationm6x 2Tb in RAID 5 for my data (mounted as logical drive) resulting in 8Tb of available space (also visible in the disk utility of Ubuntu) Ubuntu 10.04 LTS
Now the problem; when I check the capacity in the file browser on my mounted data drive, I only see 5,1 Tb of total space.
View 1 Replies
View Related
May 22, 2010
I just bought a laptop with a T4400. Looking through lshw output turned up the following for the L2 cache:
Code:
*-cache:1
description: L2 cache
physical id: 6
slot: L2 Cache
size: 1MiB
capacity: 4MiB
capabilities: burst internal write-back unified
I'm curious as to why the size (1Mib) and capacity (4MiB) are different. Surely it can't be possible to stick something on the CPU to increase the L2 cache size, right?? So what does this mean?
I'm running 64-bit Linux Mint (derivative of Ubuntu). The kernel config says CONFIG_X86_L1_CACHE_BYTES=64 but I found nothing about the L2 cache.
Can I somehow unlock more cache to get a 4MiB L2 cache for free?
View 6 Replies
View Related
Nov 9, 2010
My specs: Debian Lenny i686, 7gb ram, 1tb hdd, Pentium 4 2.2 the rest not important.
Now, i did clean install of Debian on to my 1tb hdd as such:
- 14 gb swap (as far as I understood it has to be twice as ram)
- / root 25 gb
- /home the rest
I don`t know if it`s important, but I am under Gnome+Compiz+Emerald.
So the first question is: There is a program in: Applications/SystemTools/Disk Usage Analyzer It tells me thisScreenshot-Disk Usage Analyzer.png
Correct me if I am not right, but i am running out of disk space on /home?
View 4 Replies
View Related
