General :: Check HDD Capacity Debian Lenny?
Nov 9, 2010
My specs: Debian Lenny i686, 7gb ram, 1tb hdd, Pentium 4 2.2 the rest not important.
Now, i did clean install of Debian on to my 1tb hdd as such:
- 14 gb swap (as far as I understood it has to be twice as ram)
- / root 25 gb
- /home the rest
I don`t know if it`s important, but I am under Gnome+Compiz+Emerald.
So the first question is: There is a program in: Applications/SystemTools/Disk Usage Analyzer It tells me thisScreenshot-Disk Usage Analyzer.png
Correct me if I am not right, but i am running out of disk space on /home?
View 4 Replies
ADVERTISEMENT
Dec 14, 2009
i was trying to use gnome and kde but i don't like them. I tried xfce and it seem to fit my needs but.My computer is used to be powered on for a weeks. While time passes, a process xfdesktop begin to use more and more memory and to free RAM i need to log out and log in again.
I tried squeeze yesterday on my virtual machine and it has 4.6 and seem not to have that bug, RAM usage is static(yes it still works when i write this and have memory usage 34492k, which is not changing for an hours of usage already), also 4.6 is MUCH better than 4.4.
i already tried adding squeeze to "sources.list" but i can see too many dependencies which should be upgraded if i install 4.6, i'm beginning to afraid it can crash entire GUI(or entire system, i can see there is libc6 required to be updated).
View 14 Replies
View Related
Apr 25, 2011
I can use dvd+rw-mediainfo to report the capacity of a loaded blank recordable DVD. Does anybody know of an equivalent program for CDs?
View 10 Replies
View Related
Aug 25, 2011
Whenever I unplug my laptop it gets slugishly slow, and I don't understand why. I noticed that when on battery I cannot by any means make the cpu work at its full speed (1.7Ghz) even with the performance governor; it always stays at 1.2Ghz. When unplugged from AC, cpufreq-info also tells me the speed can vary between 600MHz and 1.2Ghz, even though it reports the max hardware speed of 1.7Ghz. Besides, I have tested the laptop on AC power at 1.2GHz and it seems a whole lot faster than when on battery at the same speed. Are there any more "power-friendly" reductions in... say for example, graphics card? It would impact UI redesign significantly (and it sure as hell looks slow). How can I customize (or at least disable) these inconvenient cpu speed reductions?
View 1 Replies
View Related
Dec 9, 2010
I have a single PC that has two hard disks in it. One is 250GB running Debian linux; the other 1TB running windows. I was switching between the two by going to the BIOS and changing the order of the hard disks to boot from. Both lived happily together in peaceful co-existance. Until....
Lately, I haven't been using Linux, so I decided to convert the 250GB to windows. So I put in the windows install CD, and it all started working fine, but when it came down to setting up a partition, Windows only recognized 130GB (out of the 250GB). I got confused so I decided to re-install linux. Linux recognizes the full 250GB; it recognized that there is a second hard disk running a different OS so the grub gave the option to boot from windows. So after a couple of reboots from both drives I decided to go ahead and install windows on the 250GB. Well again, windows only recognized 130GB, but this time, windows showed me another hard disk again with 130GB capacity. Apparently I stupid enough to proceed so now both hard disks - the 250GB and the 1TB - have capacity of 130GB each. And this is where I'm stuck.
I have tried fdisk, I have tried debug, but for some reason, windows can only recognize 130GB out of the entire disks; linux on the other hand recognizes the full capacity. I also used the seagate disk diagnostic tool (seatools for MS DOS) and it found no errors on either hard disk.
How can I reclaim the full capacity under windows?
View 4 Replies
View Related
Oct 22, 2010
I've recently started trying out Debian 5 coming from Ubuntu. I'm very much in love with KDE 4.4 now they've fix it so it actually runs. but I'm unable to install it on Debian 5.
Right now I have Debian 5.0.3 on an Asus Eee netbook, and it's running KDE 3.5.x. I installed this from a Disk marked Debian, Official CD KDE i386, Debian GNU/Linux 5.0.3 "Lenny" (I bought the entire 33 CD set.)
I've tried to install KDE 4.x via synaptic, using the kdebase-runtime-bin-kde 4:4.1.0-2.
Even after a 3h download and install, it still boots with KDE 3.x. There is no switching to KDE 4.x in the KDM as well.
I've been unable to find a repository. I thought about using a Ubuntu KDE install, but after reading some posts here, I thought I'd better ask your opinions first. (Which I should ask too. if I see programs I like in Ubuntu, should I just compile them from tarballs instead of the .DEB binary to make sure they work in Debian 5?)
Should I wait till Debian.org actually puts KDE 4.x on their repositories (I hear the next version will have KDE 4.5.x on disk.)
System:
Asus Eee 1000HA
1.67ghz ATOM processor
2g memory
160g HD
Grub2
Debian 5.0.3, w/KDE 3.5.10
Ubuntu 9.04/Gnome
View 3 Replies
View Related
Dec 8, 2010
I'm trying to upgrade a Debian Etch box to Lenny. I've opened /etc/apt/sources.list, did a global replace etch->lenny. Then I did "apt-get update" as root. After some activity, I got the following message:
W; GPG error: http://security.debian.org lenny/updates Release: the following signatures couldn't be verified because the public key is not available: NO_PUBKEY xxx And then another error of the same nature for the different, FTP site. Then it said I might to run apt-get update to correct that.
View 1 Replies
View Related
Mar 16, 2010
I have been Linux user(Ubuntu)for about 3 years since my switching from Windows. Although I did not have any complain against it, I wanted to try Debian Lenny. I have already partitioned my disk and installed Debian. Everything worked fine according to my expectations except for one thing: wireless.I tried different things to get it works without result. The light indicator of my computer seems to be working but the Network Manager does not detect any signal. In Ubuntu the wireless is detected automatically even using the Live CD.
View 1 Replies
View Related
Apr 2, 2010
In accordance with directives - possibly misunderstood - I have reconfigured the Debian "locales" package; I changed the installed locale from en_US.ISO-8859-1 to en_US.UTF-8 and left the default locale for the system as "none". So far so good. In my ".bashrc" file, I have an entry for "LC_LANG".
If this entry is set to "en_US.ISO-8859-1" all my texts are readable on the console but I get warnings like: Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale If I change the LC_LANG entry to "en_US.UTF-8", I no longer get these warnings but the screen-display of Midnight Commander (mc) is a real mess. And even man-pages are no longer able to display hyphens (-) correctly.
View 3 Replies
View Related
Feb 11, 2010
I am looking for the best sources.list there is for Debian/Lenny Stable,I got the following from the website of sources.list generator, but I am not convince because for the last 6 days I did not got any update to do, my system been for 6 days straight up to date so, I am not convince at all because it is odd, here is my sources.list:
Code:
#############################################################
################### OFFICIAL DEBIAN REPOS ###################
#############################################################
###### Debian Main Repos
[code]...
PD: I got Germany Debian servers because they are pretty fast nothing more and also I am running on my Desktop Xfce4 that I loved, but, I would like to know if there is any repository for updates on this wonderfull Desktop Enviroment.
View 14 Replies
View Related
Jul 10, 2010
I just installed apache2 on my VPS (running Debian 5 (lenny)). Problem is that when i start apache2 nothing happens.
Code:
ps ax |grep apache
and
Code:
ps ax |grep httpd
returns only the grep process itself, and
[Code]....
View 2 Replies
View Related
Mar 10, 2010
I have installed Debian lenny with software RAID0 (i think it makes no sence to my problem but maybe...) I have installed apache2+php+MySQL (everything worked) I have installed proftpd (to enable users to put files over FTP) after this i tried to connect over SSH to my server i have got:
Code:
$ ssh -l shark 192.168.0.254 -v
OpenSSH_5.1p1 Debian-5, OpenSSL 0.9.8g 19 Oct 2007
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
[code].....
I thought it is problem with SSH i have tried to connect with another machine over putty, but no success... then i have removed ~/.ssh dir and tried to connect again... i got the same error. Then i connected keybord and monitor to my Linux box, tried to connect there... no success... neither root or my regular user shark. but i should mention my FTP users who have shell: /bin/ftp (symlink to /bin/false) log into the system and then automatically disconnect...
i have tried to boot my linux box to debian safe mode... it asked for a root pass. after i provided correct root pass it didn't fit. I remember once i have made my linux boot to init 1 without asking to provide a pass (it was mandriva Free 2005 or 2006.0) how to do it with a debian machine using grub or any other fixing possibilities?
P.S. i can not how provide server side /var/log/syslog or any other info because i cannot log into my Linux "server"
View 10 Replies
View Related
Sep 28, 2010
I got a givox usb 168z webcam, I want to use it on my pc which has debian, so I want to know the procedure to install it.
View 3 Replies
View Related
Sep 14, 2010
I have installed CUPS on my Debian 5 Lenny server. I do not have a GUI installed, only SSH to command line.
I cannot get CUPS to let me browse to the html interface from another machine. I believe that CUPS is running only on localhost because when I run
Code:
I get
Code:
When I browse (or telnet) to port 631 from another machine it refuses the connection, if I telnet from my Debian server to port 631 it connects.
My cups.conf is
Code:
I'm not sure how to make it allow me to browse from another machine that does have a GUI so I can configure a printer.
View 5 Replies
View Related
Jan 30, 2011
I have set up Debian 'Lenny' on my machine at home. I work in the computer industry but I am not soo techie so I want to find the best way to learn Linux from scratch.
What would be the best source of documents to find what is available in Lenny eg. software and how to install them, how to configure package manager, configure wireless adapters, use UNIX commands for linux and install Apache, MySQL and PHP?
View 3 Replies
View Related
Aug 3, 2010
What is the maximum amount of ddr that can be installed in a 64 bit ubuntu linux system computer?
View 1 Replies
View Related
Feb 3, 2010
I am new to Debian but not Linux-based systems. I have been experimenting a lot with Debian Lenny/Squeeze. I am growing more comfortable each day with the Debian design. Yet there remain many unexplored areas. I am creating a migration check list. Things to check, prepare, or reconfigure when moving from one Linux-based system to Debian.
I have a good computer background and my current check list probably is fairly good. Yet I would appreciate input and opinions from experienced Debian users of things to watch in such a migration. Login defs, passwd/group files, different directory locations, keymaps, services and daemons, etc. I am not too concerned with the desktop as I plan to stick with KDE 3.5 for a while and I can basically move those settings across.
View 4 Replies
View Related
Jan 25, 2010
I'm using Debian Lenny and I want to tunnel rtorrent only through a OpenVPN tunnel. I have a tunnel running, the config file looks like this:
client
dev tun
proto udp
remote openvpn.xxx.com 1194
resolv-retry infinite
nobind
persist-key
persist-tun
[Code]...
My idea is that I could run a sockd proxy internally that redirects traffic to the openvpn tunnel. I could use the *nix "proxifier" application "tsocks" to make it possible for rtorrent to connect through that proxy (as rtorrent doesn't support proxies). I have trouble configuring sockd as my IP inside the VPN changes every time I connect. This is a config file someone said would help:[URl].. As my IP changes at each connect I don't know what to put in that config file. I have no control over the host side config file.
View 1 Replies
View Related
Feb 17, 2010
Primary symptom: /proc/self/fd is there and normally populated, however /dev/fd is not. Process substitution therefore fails, because bash wants to create files under /dev/fd./dev/.static/ and /dev/.udev are populated. aptitude udev shows that the Debian package is installed, even though udev cannot be supported on this Xen vps (and, I believe, isn't supported by default until later stable versions of the Linux kernel).
I can solve the immediate problem by symlinking from proc/self/fd to /dev/fd, and putting the appropriate script in init.d. But are there any risks arising from Debian being misinformed about what my vps can do? And if so, what should I do about it?
View 1 Replies
View Related
Oct 12, 2010
i'm new to Debian os and currently want to install php5 apache2 and mysql 5.1. But ive got problem to start the mysql services.The error on command prompt as belows:
[Code]...
View 9 Replies
View Related
Oct 11, 2009
I have installed Koha on Debian Lenny. It does work well, but I have to manually start the koha-zebra-ctl.sh by entering /usr/share/koha/bin/koha-zebra-ctl.sh start The is, however, that this starts at boot from /etc/init.d/koha-zebra-daemon. Like /etc/init.d/koha-zebra-daemon start (does not work now) In the koha-zebra-daemon file I have:
#!/bin/sh
# Quick start-stop-daemon example, derived from Debian /etc/init.d/ssh
set -e
# Must be a valid filename
[code]....
I have made a symbolic link;
ln -s /usr/share/koha/bin/koha-zebra-ctl.sh /etc/init.d/koha-zebra-daemon
I have tried checking whether the symbolic link exists with readlink, but this never seems to return anything anywhere.
View 6 Replies
View Related
Jan 22, 2010
I have a nearly 10 years old iMac at home and installed Lenny on (somehow, I had to thrash Mac OS 9.2 :-P). Everything was successful until now, but on entering "startkde", the screen fills withkpersonalizer: cannot connect to X serverlines. Upon looking at other threads here I tried mdetect, installing X11... but to no avail
View 14 Replies
View Related
Mar 21, 2011
What happens if I update Debian Squeeze from Lenny's source.list?A step by step manual is written on Lenny, and if I change lenny to squeeze things seem to not work.When I update the squeeze from the original source.list and then change to the source.list that manual uses things are working.But if I were to start squeeze with lenny's source.list I am getting error while trying to do this:
apt-get install wget mc zip unzip bzip2 ntp ntpdate lsb-release.
View 6 Replies
View Related
Dec 12, 2010
I had debian lenny running smoothly for a while, then I think the power went out and the computer didn't shutdown smoothly. The next time I started it up I ran into this error: Checking root file system.../etc/rcS.d/S10checkroot.sh: line 274: /sbin/logsave: Permission deniedfailed (code 126)This happens in single user mode as well. I've tried fscking all my partitions but it doesn't help. I've booted in bypassing the normal init and changed the permissions of /sbin/logsave to 777 and during boot I get a message of: The file system check corrected errors on the root partition but requested that the system be restarted. failed!Then the system just reboots automatically without letting me to anything.
View 7 Replies
View Related
May 10, 2011
My requirement. We have a linux File server which was connected to SAN (IBM DS4700)now I need to increase my capacity by 50GB I've added the 50GB through the IBM storage manager to the File server, but it doesn't showing on my linux file server
bellow the detail of my drives
/dev/mapper/mpath0p6 1.6G 287M 1.2G 20% /
/dev/mapper/mpath0p7 837M 240M 554M 31% /var
/dev/mapper/mpath0p3 4.1G 2.5G 1.4G 65% /usr
/dev/mapper/mpath0p2 5.1G 1.7G 3.2G 36% /home
/dev/mapper/mpath0p1 200M 24M 166M 13% /boot
tmpfs 2.1G 0 2.1G 0% /dev/shm
/dev/mapper/mpath0p8 356G 303G 36G 90% /filesrv
I need to add the 50GB on to the "mpath0p8".
View 2 Replies
View Related
Dec 23, 2010
I wonder if this is possible to extend or regrow the Linux hard disk partition from 8 GB to 20 GB without losing the existing data on the partition ?at the moment this Ubuntu Linux is deployed on top of VMware and I've just regrow the hard drive from 8 GB into 20 GB but can't see the effect immediately.can anyone suggest how to do this without losing the data ?
View 9 Replies
View Related
May 17, 2010
I have attempted to install kernel 2.6.34 and 2.6.33 kernels with this Debian howto [url] Everything worked without any errors until I went to boot into the new kernel. When I receive this kernel panic output Kernel panic - not syncing VFS: unable to mount root fs on unknown-block(0,0)
It also spits out something about being unable to access ext2 FS. I googled this symptom and have seen that it is fairly common, but everyone's error seems somewhat unrelated. I used the same kernel configuration as the one that is currently working, to keep things simple.
And here is what my menu.list looks like:
View 3 Replies
View Related
Aug 17, 2010
I have installed Debian GNU/Linux 5.0.3 "Lenny" on a Compaq 510 laptop.
The problem am experiencing is that when I start it, it takes about 3 - 4 reboots before I get it to work without an automatic reboot.
I checked the dmesg command and the last part indicates the following:
I don't know what to do so as to enable the PCI interrupt that is should not reboot after a cold boot.
View 3 Replies
View Related
Jan 18, 2010
i do have a strange problem get running php5 on lenny 64 inside apache2. i had installed it as all instructions on the web does: # apt-get install php5 libapache2-mod-php5 php5-cli php5-common php5-cgi
apt has enabled php automatically, so
/etc/apache2/mods-enabled/php5.conf does have inside:
<ifmodule mod_php5.c>
AddType application/x-httpd-php .php .phtml .php3
AddType application/x-httpd-php-source .phps
</ifmodule>
[Code]...
View 3 Replies
View Related
Apr 3, 2011
I have a very strange problem for me. In this example dns and IP is hiden for security reason. When I try from putty manager to connect to my Debian and write next command:
[Code]...
View 1 Replies
View Related
