I'm trying to give my computer (has ethernet wired cable connected to router) a static IP but it's not working. (BTW, I'm using ifup not network manager)I give it 192.168.1.8 and 255.255.255.0.Host-name I leave as they have it (it's the name of my computer). Click OK, accept and it all says it went through but now I can't ping anything. If I change it back to DHCP, I can ping again. What am I doing wrong?
View 6 RepliesHow can I give my VirtualBox OSE a static IP address. My virtualbox is running Windows Xp 32-bit, and I am wanting to give it a static IP Address.
For example, my ubuntu pc has the ip address, 192.168.2.101 I want my VirtualBox to have the ip address, 192.168.2.201
I also want my Virtualbox to have port 95 open.
I set up a dhcp server in the lan and assigned static ips to two computers, computer A and B, according to their mac address. Everything was running fine. But when I turned off computer A, connected computer C to the network, and assigned computer A's static ip to computer C without changing dhcp setting. Computer C was able to access the internet. When I turned on computer A, dhcp couldn't assign an ip address to it, and computer C showed an error message of ip conflict and failed to use internet. I wonder if dhcp server is able to prevent other computer from using the same static ip that is already assigned to a computer according to its mac address.
View 5 Replies View RelatedI wanted to have a static local IP on my server,But on my 192*.168.1.1, there's a place where ic an see all devices, and before, the displayed name was "STASH" and with the update i put, it'S now "--", but i'd like to keep my old one..
View 2 Replies View RelatedI want to set up moodle and need to give my computer some capability to act as a server. I am following the steps at [URL] although my question is not really related to moodle. Here is the problem: setting everything up to make my computer accessible from outside has worked so far. I got myself a static IP address using a dynamic dns server and can ssh into my computer from any other computer connected to the www. So,
[Code]....
I'm having some problems on the line with ***. This is from a OpenEntidade.java class file and I'm trying to update EmprestadorView's variables.
EmprestadorView.java
public class EmprestadorView extends FrameView {
...
OpenEntidade.java
-----------------
public class OpenEntidade extends javax.swing.JFrame {
[code]....
First of all, this isn't really a problem for me, but I'm just curious. In the past when I started a data CD project, I remember that k3b used to start me with a "blank CD" of 700MB and then expand to a "blank DVD" of 4.4GB when the amount of data exceeded the capacity of a CD. Normally I just make an ISO image for the CD and burn on another machine (for a reason not relevant here).
Today, it started me off with a "blank DVD" right away. It's not a problem because the ISO format isn't different and the data is under 700MB anyway. How come? Ah wait, I think I know what it is, there's a DVD+RW in the drive at the moment so k3b got too smart and assumed that I wanted to write to it, even though I selected Create image only.
I have installed Audacity from Packaman repo, because one from opensuse repo has no mp3 support. Now when I do zypper dup I get offered to upgrade Audacity and change vendor:
[Code]....
However, I would like to stick to Packamn repo. I have tried to change Packan repo Priority from 99 to 120, but I still get the same offer. If I protect the Audacity in Software Management, I will I be able to upgrade to new version of Packamn's Audacity if it hits repo in future?
I can't seem to give myself audio permission. What is the command that lets me add myself to a group so that I may be able to use alsa?
View 2 Replies View RelatedOn Opensuse 11.3,a normal user could not access and modify files in other partitions as the default setting .Is there any way to give a permission to a normal user to do these things instead of do these as a root user?
View 9 Replies View RelatedI have installed opensuse 11.4 couple of days ago. Installation went smoothly. Everything is working just fine except the screen resulation. My Monitor supports up to 1366*768. The Display Settings in 11.4 gives option of 1366*768, But whenever I maximize any window (say firefox, opera etc) I can not see the close button & scroll-bar. Here is my xorg file of monitor.
[Code]....
Is it possible to give user only FTP access / browsing rights for certain directory within /srv/www/htdocs and prevent same user to browse all other directories, even user's /home directory on that server?
View 8 Replies View RelatedI have downloaded static skype and when i tryed to run it i get following message:
Code: skype: error while loading shared libraries: libXv.so.1: cannot open shared object file: No such file or directory As far as i know statically linked skype shouldn't ask for anything wright?
How do I figure out what to enter into the fields when I set a static ip in KDE? Other network managers give you suggestions but knetwk does not.
View 9 Replies View RelatedHOW DO I SET MY OWN STATIC IP ON SUSE?
View 5 Replies View RelatedI am using Suse 11.4, with the Gnome desktop. I have downloaded the VLC player, but cannot work out how to make it play CDs in the CD drive. Right clicking on the Audio Disc icon that appears on the desktop whenever I load a disc doesn't give me an option to Play using VLC. Is there a way to make VLC the default player for CDs?
View 9 Replies View RelatedI got this message on Friday from just one domain. uote:mailsrv.forthnet.gr #<mailsrv.forthnet.gr #5.5.0 smtp; 554 5.5.0 Your message was considered to be spam by the FORTHnet Antispamming Policy and was not delivered to the recipient. The following spam tests returned positive for this message:FORGED_RCVD_HELO,RCVD_IN_BRBL. For further information visitWe are not a spamming community but it seems we have a statice IP address that has a Reverse lookup to "myipaddress.static.lyse.net" and not my email domain. Would setting a cname mail.mydomain.no -> myipaddress.static.lyse.net cure this problem or are there more tricks to be performedOnce I have cured the FORGED_RCVD_HELO I can move to getting the IP removed from BARACUDA.
View 2 Replies View RelatedI was trying to configure a static Ip on openSUSE but didn't get very far...I would like to do it through the terminal.
View 4 Replies View RelatedWe're trying to replicate something that Windows servers can do. Basically on a Windows box, you can give it a static IP address, but there is an option to have it update the DNS server with it's IP and hostname. We are trying to do this on SUSE 11.I know I can get this function to work on SUSE if the box is set up as with DHCP. What we're having difficulty is when the server is set up as a Static IP to get it to update the DNS server
View 8 Replies View RelatedI have virtual box installed which automatically installed bridges for my network adapters. This has always worked fine. I'm attempting to set up a static IP for this machine now. I use NetworkManager, and the physical connection (eth0) is set to static IP of 0.0.0.0, and the bridge (br0) attached to eth0 was set to DHCP. I changed br0 to my desired static IP and lost net connectivity (I'm talking about the host, not the virtual machine - I'll get the host working first). Re-enabling DHCP restores connectivity. So I don't know what the problem is, but I am unable to assign a static IP to the bridged connection. Do I have to do this differently? Do I need to remove the bridge so I am using just eth0 again, assign the static IP to eth0, and then re-install the bridge? I haven't tried that yet because a) I don't know how to remove & reinstall the bridge, because it was done automatically by Virtual Box installation, and b) I could probably do that if I had the time figure it out but right now I don't.
I set up a static IP on wlan0 on another machine using Network Manager and it works fine. That machine also has Virtual Box installed but for some reason doesn't have the bridged connections. (Perhaps because it runs Ubuntu, not OpenSUSE, if that makes any difference)
how to get openSUSE 11.2 to automount a USB drive (Creative Zen to be precise) to a static mount point? At the moment KDE is filling up my media folder with disc-x folders and the podcatching software keeps picking the wrong one to sync to. It's not my PC so command-line mounting is out of the question.
View 2 Replies View Relatedhow I can define a local static IP address (so that I can run a web server off of the same IP, rather than letting my router DHCP it)?I've tried doing the YaST->Network Devices->Network Settings->Traditional Method with ifup->Set NIC to desired IP->Set Default Gateway to router address method, and afterwards I can't even get into my router anymore (not even responding to ping).
View 8 Replies View RelatedI'm maintaining a very modest network at home, with OpenSUSE as OS on the server. I got the DHCP and routing working by following the instructions in the wiki. However, every time I run dhclient on the server/router, it appears my own DHCP server assigns an address to the internal network card despite the fact I specifically assigned it to be static using Yast. The situation resolves itself when I restart the network services with the command /etc/init.d/network restart. Otherwise no problem, but it also seems the internal network card gets a "new" IP from my server every time the external card requests one from the ISP. This is more of an issue.
View 5 Replies View RelatedI think that i lost my memory, because i completely forgot how to accomplish this.
I have a WEB/MAIL server configured to work on a static IP address, lets say 200.11.22.33.
Now I wanna point a domain to that server to get the services up and running, lets say mydom.com ...
The static IP Address is assigned by my Internet Provider.
I'm lost in the part of connecting the domain with the server.
I have the domain DNS pointing to the ISP name servers, but I don't remember if this is the correct way, or if I have to setup my own DNS server.
I have a problem with tightvnc, when I set up a dinamic ip with networkmanager it works fine but if I set up a static address connection it display an error "You have been unexpectedly disconnected from 'hometsa-comp'. Would you like to reconnect?"
"Couldn't convert 'hometsa-comp' to host address" I have setup the ip address, netmask, gateway and dns server in the network manager static address, it works when I setup the vnc connection using ip address instead of hostnames.
How do I assign IPv4 and IPv6 static addresses permanently in OpenSUSE 11.2? Currently I am only able to assign either IPv4 or IPv6 static address not both. I cannot find even the interfaces file(/etc/sysconfig/network/interfaces).
View 2 Replies View RelatedI just put in an ATI Radeon x600 on my OpenSuse system I loaded last week. The Xorg log shows that it is using the Radeon module (driver). I am seeing colored/static rectangles covering the green wallpaper and when scrolling in Firefox. Does anyone know how to resolve this issue, and is this the driver I should be using?
View 3 Replies View RelatedI would like to set-up a pretty fast a running apache. I would like to use him so to launch a pretty small web site of 10 static html pages. At this time there is no security concerns (even though I want to do it right) , because the computer has not even ethernet cable. I have some experience, 8 years ago I Was setting up virtual hosts in fedora, so this process is not a blackbox for me.
View 9 Replies View RelatedI've been using opensuse for about a week.(although I'm not completely a linux noob) I've been slowly moving more of the stuff I do on windows over to suse. I thought my sound was working fine until I decided to get mp3s running on amarok. I followed a bunch of guides which didn't work. While I was messing around with stuff I noticed a startup noise. I just assumed it didn't have a startup noise. At some point I broke all of my sound except running wine, so I reinstalled.
Now that I've noticed, none of my notification sounds work. Stuff like skype, firefox, and wine still give me sounds.
(If anyone could point me in the direction of a good place to get mp3s working on amarok would be nice as well.)
How do I activate static DNS for mobile broadband. I can't find any place to write down this information. Settings are made in Network Manager - not Yast.
View 3 Replies View Related