I am trying to connect PDA via Synce to Linux and simply cannot get through. I tried with odccm and now going through OpenSuse installation and installed as suggested synce packages:
[Code]...
On the GnoTime home page they say that GnoTime is included with various distros, including suse. However, my opensuse 11.2 does not have this app. Do I need another repos? Can anyone advise how to simply install GnoTime for OpenSuse 11.2?
View 9 Replies View RelatedThe problem is that it simply won't connect in Ubuntu at all. In fact, to write this, I am using Windows. I am running 10.10. I downloaded the necessary file and installed it with my package manager, but it still won't work. What do I need to do to make it work?
View 6 Replies View RelatedIf you attempt to install VLC by simply adding the VideoLAN repository to YAST, the version that's installed won't have audio.Follow the Zypper instructions on the VideoLAN website (bottom of the page)VideoLAN - VLC media player for openSUSE Be sure to specify 11.3 as described, and VLC will install fine.
View 7 Replies View RelatedCan anyone guide me past this problem when trying to install synce/Multisync on F11. I am trying to sync to my HTC TytnII (HTC Kaiser) and any other useful advice appreciated as the synce wiki seems a bit out of date: Command: yum install synce-sync-engine synce-gnome synce-kde synce-software-manager synce-trayicon librapi Gives: file /usr/libexec/synce-serial-chat conflicts between attempted installs of synce-serial-0.11-3.fc11.i586 and synce-hal-0.13.1-2.fc11.i586 I presume I can 'force' the offending rpm but do not want to cause more issues. There is a bug report for this already: 505199
View 6 Replies View RelatedTrying to build the required libs for synCE, www.synce.org, as listed in their web site under building from sources. Came upon a snag, on building the odccm library which needs gnet-2. I loaded gnet-2 from my distribution DVD, and then did an #ldconfig afterwards, but it still says that it needs gnet-2. Not sure why it can't see it. I tried to build gnet-2 from source, but had a difficult time finding it as it is deprecated and Gnome only had the latest build which did not build (errors).
From configure script for odccm-0.11: no package 'gnet-2.0' found. Part of configure script is below.
Code:
if test -n "$PKG_CONFIG"; then
if test -n "$GNET_CFLAGS"; then
pkg_cv_GNET_CFLAGS="$GNET_CFLAGS"
else
if test -n "$PKG_CONFIG" &&
[Code]...
I'm trying to synce several windows mobile devices without much success. All the instructions I've read say that synce-dccm should be installed. I can't find it (or synce-odccm) either via synaptic or using apt-get install. Has this package been re-named or incorporated into something else or just redundant? I have the repository "launchpad.net/synce/ppa/ubuntu lucid" added to my sources.
View 9 Replies View RelatedThis requires a package(opensync-module-python) that appears to be removed. What should I do? What can I do?
View 2 Replies View RelatedI would like to make 2 vertical lines and two horizontial lines around this program. I use gcc as compiler.
* Simple parallel port output control program for Linux
*
*
* The program output the data value to PC parallel port data pins
* (default lpt1 I/O address 0x37. The data values are given as the
* command line parameter to the program. The number can be
* in decimal (0..255) or hexadecimal format (0x00..0xFF).
[Code]....
Lately, I have found that I have to go back to Vista (yes, old Vista no one loves) to burn an iso file on to a CD-RW. Brasero simply don't even see the CD-RW to even blank it, let alone burn the new iso file. I am using Ubuntu 10.04. As I have Debian 6 (gnome and KDE) I tried the same CD-RW, but neither Brasero, nor KDE's K3B 'saw' the CD-RW.But, the in that Vista, the CD/ISO burning software 'saw' the CD-RW without fail. Btw, this same problem happens with Unetbootin. Linux Unetbootin works worse than the Vista Unetbootin!Now, I have to use Vista to burn CD/DVD/Isos.Is there a some special problem with Linux burning software? I know that some developers are not happy with Brasero,
View 9 Replies View Relatedi'm having hard times trying to get rtorrent working on two CentOS boxes (one is 5.2 and the other 5.3, both x86_64)
i'm using rtorrent RPMs provided from rpmforge
they install fine, starts fine ... but there's simply absolutely no traffic at all !!! I'm sure ISPs are not blocking torrent (they can be shapping, but blocking i'm pretty sure they arent). And when i say there's no traffic, i mean rtorrent cant even download the torrent file when i inform the [URL] from inside rtorrent. It stays there on 0% and there's no download.
if i download the file from the console, with wget for example, i can download it successfully.
i have already tcpdumped the machine and i can confirm rtorrent is not even generating any kind of traffic. NOTHING.
do anyone got rtorrent from rpmforge working fine on CentOS 5.2 and 5.3 x86_64 boxes ?
it should be simply .... at least it was on Fedora 8 and 9 that i used before start using CentOS ...
Yesterday i updated fedora 13.After reboot problems started with te display driver.Scrolling sreens goes very slow and with little steps.Moving a screen from one side to the other goes also very slow.It seems there is a problem with the ATI driver.I also have problems after new kernel updates.The new kernels simply won't boot? The boot proces hangs everytime the fedora logo turns wite.
View 2 Replies View Relatedmy two partitions (ubuntu and WinXP) worked fine, i always had a boot option at startup. however, my Win boot option simply disappeared. I did not do any update recently, so I do not really understand what could have happened. My /media/windows is also completely empty. when i try to open the windows partition, it says "could not mount".
View 7 Replies View RelatedGrub installed from 9 or 10 ubuntu simply won't load Windows.Ubuntu and GRUB on IDE hdd, Windows on SATA HDD.Installed all default options, just clicked thru install and when attempting to boot Windows XP screen is blank with a blinking cursor in the top corner.Same thing happened earlier when I ran Fedora 11 then 12.Different version of same result.Can't Canonic work with Grub developers to at least make a workable configuration r it's default setup?Searched the web, in a 1000 places same solution is offered: adding a few lines to menu.lst.1) the lines are already there2) this is for the old version of grub.Does grub actually work for anyone out there? Or is it only supposed to work in weird configurations?
View 9 Replies View RelatedI have a linux desktop with two connections - fast eth0 and slow modem ppp0. Most of traffic (e-mail, DNS, NTP) can be routed simply by IP/mask. But how about http and p2p (torrents, DC++)? Routing by IP is unacceptable, because there is very huge amount of routing rules. I need route http packets (80 port) through ppp0, p2p through eth0 (10000:65535 ports). I've found that splitting traffic by port is possible with marking packets for different gateways. For begin I cleared all tables and bringed up connections.
Code:
# iptables -F -t mangle
# iptables -F -t filter
# iptables -L -t filter
Chain INPUT (policy ACCEPT)
[Code].....
I'm trying to setup PS3 media server on my new OpenSuse 11.2 and I'm being unable to connect to the PS3. The multimedia server seems to being working ok, only it has not appear on XMB.
I've been searching on PS3 Media Server forums and try a couple of solutions regarding /etc/hosts and adding full qualified domain name of server to it, but it doesn't seems to work.
I recently installed Debian with the Xfce desktop environment on my Toshiba Satellite laptop and my Synaptics touchpad simply does not work. In fact, it was not even working in the Debian graphical installation.
I verified that the touchpad is enabled by going to Applications --> Settings --> Mouse and Touchpad. I also verified that I had the requisite drivers by running Code: Select allsudo apt-get install xserver-xorg-input-synaptics. Finally, /var/log/Xorg.0.log did not reveal anything unusual, though the output is quite long and was difficult to navigate. Here is the output of Code:
Select allcat /var/log/Xorg.0.log | grep Synaptics:
Code: Select all[ 464.205] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
[ 464.205] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 464.205] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 464.205] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 464.205] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 464.205] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 464.260] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 464.260] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5678 (res 46)
[ 464.260] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4732 (res 63)
[code]....
I have tried a few packages but cannot find an easy intuitive interface for editing tables in a mySQL database. I just need to simply edit the table field data, import and export multiple rows, and filter the table data so only the rows are returned based on a string that I search for. The tables I edit have several thousand rows and some up to 30,000. I do not know how to write queries and it seems all these packages require that you know how to write sql queries to do what I need to do. On the mac I used Sequel Pro, which is dead easy to use and is mostly point and click to do all the above. Since my mySQL experience is very limited, I really need something simple like this.
I have tried:
MySQL Workbench
Navicat (lite version)
MySQL Query Browser
how to do what I need to do with the above packages.
Is there anyway I can go back to the old grub where I can do things like removing and reordering my menu simply with 9.10 and Lucid when it comes out?
View 8 Replies View RelatedOur business is replacing Microsoft Windows with Ubuntu (Linux) but there is one or two problems with the main computer in the office. One the main computer is my Dad's computer and the only thing he does differently then the other computers is that he does his accounting which he uses Simply Accounting and I don't think Simply Accounting is compatible with Ubuntu/Linux.
I found a great, simple accounting program for Ubuntu called Eqonomize. It doesn't have to be that one, but anyone where we can convert are data from Simply Account to an accounting program with Ubuntu.
point me at a free proxy to bypass this which can simply be installed, built and/or run.setting up a server outside china and running a tunnel to it from my comp is not an option. also, below is a list of sofware that i have tried and failed to work:
Tor with vidalia
Tun with squid (i think squid)
hamachi (which i later realized would never have worked)
i tried to get haystack but it wouldn't build.
PS: if this post is in the wrong area, please tell me where to move it...
I have an ubuntu machine connected to my network which is used as a Minecraft server, storage, and a subsonic server for music. For the most part, the only person using these services, especially during downtime, is just me at home. Which is why I'm surprised that 2-days ago I detected that my network was being slowed to a crawl. There I found that the ip connected to my ubuntu was moving around 170,000 kb on my Netlimiter 3 program.
I have no idea why that is, I closed my ports that were forward for the ubuntu servers, but the bandwidth keeps leaking. Disconnecting the network from the ubuntu computer or turning off the computer stops the odd downloading and uploading. If anybody would have any information of what I can check or shut down in Ubuntu, please let me know. I'm fairly a beginner to the OS, but haven't been able to find a similar problem on this forum.
I've been trying to revive my old Acer Aspire 3680, which is supposed to have Acer InviLink 802.11b/g Wi-Fi CERTIFIED solution, supporting Acer SignalUp wireless technology, as shown is in Specification.The system simply doesn't detect Wi-fi and I don't know how to make it work.
View 9 Replies View RelatedNew problem with compaq 610 160GB 2GB intel duo core 2.0.This machine will simply not run sound apps on any distro I've tried with.
View 5 Replies View RelatedAnybody know how to import Simply Accounting files into Gnucash?
View 1 Replies View RelatedI have all my music stored as digital files on my hard drive, in a tree of folders. The smallest branches of the tree represent individual albums, each holding a dozen or so individual song files. I have Amarok 2.0.2 installed on Kubuntu 9.04. The program opens as expected, and using the "Files" tab in the left pane I can navigate to any sub-directory I want. I can see the listings of songs within each album's sub-directory.
But I cannot figure out how to make Amarok play those songs. Drag and drop from the left pane into either the center pane or right pane does nothing. Right-click and "Append to Playlist" does not appear to do anything -- the "Playlist" tab in the left pane remains empty, and the center and right panes remain empty. I've tried to find the answer in the on-line Amarok manual, but the documentation only seems to take me to the point of finding the songs in the left pane, but not how to make Amarok play them.
In Iceweasel (Debian's name for Firefox) within the Preferences you can select "Load images automatically". I have this unchecked, because I use dial-up and prefer not to have to waste time with images. However, for some sites it's sometimes useful to load the images. So, I'm wondering if there is a way to simply load the images for a site that is easier than what I currently do (which is: going to Edit-Preferences-Content, rechecking "Load images automatically" then pressing Reload). In short, is there a way to have a button somewhere that I can press that will simply load the images for the current site while I can still have the "Load images automatically" preference box unchecked?
View 2 Replies View Relatedas title, is there someone who switched a 5.5 lamp server to 5.6 simply with a yum update?Is it a safe and painless procedure?
View 7 Replies View RelatedIn Ubuntu, When I type sudo and hit enter, the new command will appear on the command line, instead of simply executing. This is different from other operating systems I've used, such as older ubuntu's, mac osx and debian. Is there a way of disabling this confirmation and having it simply execute the command?
View 3 Replies View RelatedI've got Ubuntu 11.04 here and I am currently downloading oneiric ocelot iso. My question is: can I simply upgrade from my current Ubuntu version to oneiric? I've got some pretty important files on my current Ubuntu and I don't want to loose them and yet very much interested to see what oneiric ocelot.
View 1 Replies View Related
