I need a Etext reader to help me read my txt books. I can not use the RFBD or get the Virtual box to work! Both tread told me to Not Try! so what is a etext reader for the txtbooks.
View 2 RepliesVirtual Box doesn't work under ordinary user, though this user is in vboxusers group. Under SU it work normally. This happied after upgrage to 4.0.10-8.1 version from obs://build.opensuse.org/Virtualization community repository. In Oss repository there is 4.0.4 version.
Here the massage, that appears after start of Virtual Box under ordinary user: "Failed to create the VirtualBox COM object.
The application will now terminate.
Ditails:
Callee RC:
NS_ERROR_FACTORY_NOT_REGISTERED (0x80040154)
I would like to configure and SAN disk. But I do not have a physical SAN disk. Is it possible to create and configure a Virtual SAN disk and work on it with virtual machines?I have around 400GB of space in my Laptop.
View 7 Replies View RelatedI have an appliance called my_appliance.raw. To start the appliance locally, I use:
[code]...
After that I would like to ssh into the guest from the host but just the ssh command doesn't work. firewall is disabled on guest. the ip I use is the one that ifconfig shows when I run it on guest. sshd is running.
Can I copy my virtual box VM windows XP virtual-machine files to another Linux computer and run the machine on that computer while I keep on running it on the original computer?
This question is about technical possibilities, not licences.
Has anyone gotten XP Mode to work in Win 7- while Win 7 is running in VBox? Everything installs seemingly error free- XP Mode, and the two updates. I then start Win XP Mode. The computer goes through 25 minutes or so of setting up XP mode for 'first use'. At the end, a message appears: "Could not complete setup. Please try again". In Win7, I've removed XP Mode from Programs and Features, and reinstalled. No change.
Using 11.3, Oracle/Sun VBox 3.2.8 with guest additions, and Win7 Ultimate with the three required downloads (after selecting Win7 Ultimate 32bit and English) Download Windows XP Mode
We have the following school project that I can't seems to make correctly:We need to make a whole subnet communicate with the internet through another subnet's gateway using iptables, with a difficulty option, only 1 NIC.I know its seems complicated, but it's not that bad. Please keep reading and let me explain.Let's say we have subnet (number 1) = 10.1.2.0/24, gateway 10.1.2.1.I have another subnet (number 2)= 192.168.1.0/24, gateway192.168.1.1Subnet 1's (10.1.2.1) gateway doesnt have a WAN connection.Subnet 2's (192.168.1.1) does.Which means all 192.168.1.XXX can communicate with internet, while all 10.1.2.XXX cannot.Not, the goal of the project is to give 10.1.2.1 a possibility to NAT packet comming fomr it's subnet to 192.168.3.1, so the subnet 10.1.2.XX will have access to the internet.
Now, since 10.1.2.1 (the gateway) only have 1 NIC, we make it hold virtual IPs.eth0:0 = 192.168.1.35 (static)eth0:1 = 10.1.2.1 (static, begin the 10.1.2.0/24 gateway)The routes are OK and I can ping correctly on both subnet.I can even ping the internet from eth0:0 !! (192.168.1.35)I tought using the following iptables command from the 10.1.2.1's machine would do the trick:iptables -t nat -A POSTROUTING -s 10.1.2.0/24 -j SNAT --to-source 192.168.1.35But for some reason, 192.168.1.1 doesnt even receive any packet from it's log, except when it's not NATed (when it comes directly from 192.168.1.35), which let me think the iptables command above doesnt work correctly.
I am more used to freebsd. I installed fedora in Virtual Box and tried to get on to the internet but it didn't work.
In the terminal, when issued ifconfig command, it shows eth0 and eth1..... I dont know if the wireless is installed or not.
I don't know if I'm posting in the right box - I'm new to both Ubuntu and this forum so please bear with me. Thing is, I spent almost 2 days trying to find a web server that meets my likes. I tried like almost every well known web server, be it Apache, Lighttpd, Nginx, and Cherokee, one by one. For each I was successfully in getting PHP up and running, but was never able to configure the virtual hosts.
I'm 99.99% sure that I - for multiple times - followed correctly the online how-to's. Especially Cherokee, I did exactly the screencast (which is just 2 steps, as Cherokee has a GUI for virtual server setups). Strange enough, with each web server the virtual hosts thing never worked for me. I always received "Server not found" error. I tried with Firefox and Google Chrome. Currently I'm on an Ubuntu 9.10 (32bit) box - I reinstalled this one over the 64bit, to vain.
Don't know if it's a problem with my DNS, but I have another machine running Windows 7 with the same DHCP settings (means same DNS and IP range). Virtual hosts work fine there on an XAMPP installation.
Apparently the Xen kernel version doesnt work on Virtual Box. Didn't even know I had that version. All I can see is I386 and x86_64 version. Anyone got any experience with this point with in the direction of the correct ISO to work on a standard PC?
View 5 Replies View RelatedI'm running Virtualbox on Windows Vista.I have a Microsoft USB mouse (it says "Comfort Optical Mouse 3000") with left and right buttons, and a mousewheel in the middle.If I press down on the wheel, it pretty obviously makes a "click".I'm running Debian inside Virtualbox, and it's working great, but middle-mouse-click does nothing.Left and right click, and scrolling with the wheel, work fine.Is there any way to get middle-mouse-click to work in my virtual machine?
View 2 Replies View RelatedI'm trying to ssh into a virtual installation of ubuntu I have, named "ubuntu-x86" but I can't get it to work for some reason. I have two network cards, both assigned to NAT, on the virtual machine, but one has a static IP address, while the other uses DHCP. For some reason, the command:
[Code]....
Having trouble visualising how IP-Based Virtual Host (with SSL) would work. Here is my vhosts.conf file:
Code:
#Define Name Virtal Host
NameVirtualHost 10.10.0.54:80
#Used to replace the main server host. The log file will reside in /var/log/httpd/error_log
[Code]....
How will it work? I will need to forward port 443 to the 10.10.0.55 interface right? Without doing that, there is no way this is going to work... is there? And that means that I can't run more than 1 ip-based SSL virtual host on one machine because I can't forward 443 to two different interfaces.
Also, do I use internal ip address or external ip address in the <VirtualHost > tag? I only have one static public ip.
I created a new virtual host in Apache using Webmin and am having trouble getting it to work. When I created it, I opted to create the config file as a "New file under virtual servers directory /etc/apache2/sites-available". So now I have a default config file /etc/apache2/sites-available/default and a new one created by Webmin at /etc/apache2/sites-available/webmin.1412323.conf. It seems like the settings in that new Webmin config file aren't being picked up by Apache -- when I try and browse to mywebsite.com it shows my root /var/www folder, not the subdirectory /var/www/mywebsite.
Is there a way I can tell Apache to include the new Webmin config file for the virtual host or should I just copy the directives into the default file at /etc/apache2/sites-available/default? It seems like Webmin should automatically configure Apache to work with any newly generated config files.
I am trying to install again virtual box after a new clean install of 11.2. After install and running: /etc/init.d/vboxdrv setup
I get error:
Stopping VirtualBox kernel module done
Recompiling VirtualBox kernel module failed
(Look at /var/log/vbox-install.log to find out what went wrong)
Here is the log file:
Makefile:162: Warning: using /usr/src/linux as the source directory of your Linux kernel. If this is not correct, specify KERN_DIR=<directory> and run Make again.
Makefile:170: *** Error: /usr/src/linux (version 2.6.31.12-0.1-desktop) does not match the current kernel (version 2.6.31.5-0.1-desktop). Stop.
On OS 11.4, 64 bit box. Has anyone figured out how to make the VM hdd larger after the original one has gotten full? I've search the forum but all the searches come up with ways that confuse me.
View 3 Replies View Relatedhave installed kvm using yast and now when I try add new mashine I am getting message "virtual monitor is not running and to run xen I need restart my opensuse, which I did and still getting the same message... thats what I am getting when going to manager virtual mashines -> add new mashine : Traceback (most recent call last):
[Code]...
I am trying to install a 11.3 virtual machine through Xen on a 11.3 installation. I am trying to install from the opensuse DVD. I get to this point, setting up everything (I can only do paravirtualization) Then the DVD spins for a little while and after that I am returned this error message "device 0 vif could not be connected opensuse....."
I tried a bunch of different settings in the previous screen and I always end up with this error I googled around and it seem to be a problem in different distros but I could not spot a solution at all
apache virtual host to limit the concurrent connections of virtual hosts? Taking into account the host of each virtual user's home directory can also have more than one subdirectory, which should be restricted to a subdirectory. Is beyond the control of the operation of these sites in a subdirectory. Best local restrictions or limitations to the overall situation.
View 1 Replies View RelatedI have spent considerable hours searching forums and googling. I have yet to find out what "lm-sensors acpitz-virtual-0 Adapter: Virtual device temp1:" is actually looking at. I have an Abit IP35 motherboard with Ubuntu 9.04 installed.
Here is the output from sensors:
Virtual Device Temp 1 keeps going up to 121 degrees and the computer shuts down. None of the others overheat. Also, my bios does not show my voltages to be set like it lists above. The bios in the motherboard is the latest from Abit.
When I create virtual ethernet interface and do a ping -I <v_int> <host> the outgoing address is the one of the physical interface and NOT the virtual interface.Is there no chance that trafic will go out with virtual interface address??Incoming trafic is done well i.e. responds to the virtual interface have the virtual address.
My problem is that I have 2 modems and want to check both default gw behind the modems.
If I do a "normal" ping both are reachable over default route even the modem which is not the default route will not work because ping goes over the working modem.So I have 2 routing tables and want to route the virtual interface to one modem the other to the other modem
I'm having an issue with setting up the virtual hosts on my web server. I have 2 virtual hosts (example1.com, example2.com). example1.com works but example2.com is sent to the index file of example1.com. I did some searching on google and it seems the problem might be with my /etc/hosts file.
First virtual host that the second is also directed to...in sites-available/sites-enabled (note port 80 is blocked by my isp so I use 8080)
Code:
Second virtual host file
Code:
And my hosts file
Code:
# The following lines are desirable for IPv6 capable hosts
Also I'm using a dyndns.org...would that make a difference?
I have been unable to create any type of Windows VM in Xen. Every time it tells me that the processor(s) in the machine do not support full virtualization. After some research, I found several articles regarding the vmx setting in /proc/cpuinfo not showing up when the xen kernel is booted versus it showing up in the default kernel. Of course, I am not seeing the vmx extension in /proc/cpuinfo after I boot to the xen kernel. In the other posts where other people are in the same situation, the only resolution is to upgrade to the 2.6.16 xen kernel. I am already past that:
linux-vxke:~ # uname -r
2.6.31.8-0.1-xen
yet I am still unable to create any form of Windows VM. I have even seen that some people are able to create a partially virtualized Windows VM, and they report that the message is only a warning. However, I am unable to get past this message. I am running a Dell Optiplex 760 with an Intel Core 2 Duo E7300, and I have the VT-x setting enabled in the BIOS. Has anyone else seen this situation or have any thoughts on why this is happening?
I am trying to find a good virtual keyboard that is in Japanese. there doesn't seem to be much options for virtual keyboards, let alone one in japanese. The only one I have found is xvkbd, but it is very limited and somewhat glitchy. I tried setting it to Japanese, but all that does is add a button to switch to japanese that you annoyingly have to hit every time you want to enter a character. And not only that, even though the keyboard is in hiragana, it inputs katakana. Are there any other options for a virtual Japanese keyboard, or at least a way to get xvkbd to input hiragana?
View 7 Replies View RelatedI have openSUSE 11.2 x64 natively installed on my PC.
What is the best virtual machine that I can run on openSUSE in order to run XP Pro x64 and Windows 7 x64.
By best I mean opensource, lightweight, and stable.
I installed openSUSE 11.2 and works great. The only problem I have is that I can use the XEN virtual machines only as a root. If I login as a normal user and open the Virtial Machine Manager I receive the following message:Virtial Machince Manager Connection Failure:Unable to open a connection to the Xen hypervisor/daemon.
Verify that:
- A Xen host kernel was booted
- The Xen service has been started
[code]...
I ma new in OpenSuSe and I want to create virtual Machine using the graphical interface Xen of Opensuse 11. I did'nt find a good tutorial ton use it or a gut getting started with xen in Opensuse.
View 1 Replies View RelatedI previously had my Virtual Box install of Ubuntu set to have the Network via "host-Only Adapter". But recently I needed to get on the internet on that install, so I changed it to "NAT" and restarted. It still cannot get on the internet! How can I fix this?
Some notes:
1. I have other virtual box installs that CAN get on the internet
2. This one was able to get on the internet prior to setting it to "host only adapter"
I installed Oracle VM virtual box from software installler.I want to run windows xp on it.But I'm getting following error whenever i click on start(note : I haven't installed xp just created the vdi.):First window: (VirtualBox - Error):Failed to open a session for the virtual machine WindowsXP.The virtual machine 'WindowsXP' has terminated unexpectedly during startup with exit code 1.
The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing'/etc/init.d/vboxdrv setup'as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary.and in the end Bug Buddy reports error.I saved the report file but where should i post it.(Provide link if possible)
I just installed openSUSE 11.4 and after the installation of VirtualBox I coudn't start it. The icon at the cursor kept jumping but no response. I tried to run the binary from Konsole and I got the following message:VirtualBox: supR3HardenedVerifyFileInternal: Failed to open "/usr/lib/virtualbox/VMMR0.r0": No such file or directory (2)I checked YaST to see which packages were installed:
python-virtualbox
virtualbox
virtualbox-guest-kmp-desktop
[code]...