I'm trying to ssh into a virtual installation of ubuntu I have, named "ubuntu-x86" but I can't get it to work for some reason. I have two network cards, both assigned to NAT, on the virtual machine, but one has a static IP address, while the other uses DHCP. For some reason, the command:
[Code]....
I couldn't find a clear answer to this, but is the linux-image-virtual package for host machines that will contain VMs, or a VM-oriented kernel for guest OS (ubuntu)? I have some guest VMs running on Microsoft's Hyper-V, and was looking for some further optimizations.
View 3 Replies View RelatedHow can I connect to Linux (which is in a VM) from the host PC using putty? I can ping the 192.168.1.108 from my host PC. And there is sshd process running on Linux. I choose the SSH to connect, but gives error.
View 5 Replies View RelatedI've set up ubuntu server 10.04 x64 with kvm and bridged networking and installed win server 2008 as a guest os. The guest os has full access to the network including lan/wan but the host os can only reach my lan and not the wan. This is true even when the guest machine is powered off?I have to admit that my knowledge of networking, particularly with respect to linux is very flakey but surely if the guest has internet access this should also apply to the host? My only suggestion is an issue with mac addresses but i don't know where to start. Has anybody ran into this problem before?
View 3 Replies View RelatedI am currently running ubuntu on a qemu-kvm virtual machine, and the host is fedora. I would like to mount a folder of the host machine on my VM, but never succeeded. The result of the command is :
root@armnlib-kvm:~# mount -v 192.168.1.10:/nfs /nfs
mount: no type was given - I'll assume nfs because of the colon
mount.nfs: timeout set for Thu Jul 7 06:02:43 2011
mount.nfs: text-based options: 'addr=192.168.1.10'
[Code]....
I have a WindowsXP virtual machine which I need to isolate from the host machine completely (have the host act as a bridge but not be visible on the IP layer at all.) It still needs to have Internet access. Obviously it has to be able to contact the router but I would like to be able to block port 80 (or even just block all SYN packets addressed to the router.) I also want to allow port forwarding from the router to the virtual machine. I can use basic iptables but this is way beyond me.
The host OS is probably going to be Debian Lenny but this is not built yet so if someone can recommend a different distro which is as lightweight as possible but will support VMWare, iptables and tcpdump then that would be great. I was thinking of Slackware but I have not used it in ages and from what I can remember their is no real package management.
Migrating Virtual Guest to Native Host
I have been using ubuntu server and desktop on virtual box for a while now. I have come to enjoy it more than being in Windows. I would like to install it natively. I am wondering. is there any way I can take my virtual machine and apply what I have done there to a new ubuntu install?
I have a ntfs hard disk, will ubuntu resize that for me at install?
Any good apps for backing up all my my firefox data and then applying that to my firefox in ubuntu?
I need to keep windows for some stuff for work, and for some games I like.
I have RHEL running in Virtual Box and my native OS is Win 7. From a purely educational standpoint, I want to be able to access RHEL from Win 7 over SSH. I download putty but don;t know how to make it do what I want. Ideally, I would like to use the linux command prompt at a minimum and preferably access the GUI apps also. IS this possible? I am just trying to explore and expand my linux knowledge.
View 7 Replies View RelatedFC13/KDE
How do I make a Guest img on hard drive and install Guest on a FC13 host? Is there a set of instruction for doing it on a FC13 host? I went to this website for the FC13 KVM instructions, but near the bottom of page 1 he starts off with making a Guest, Debian Lenny, on ubuntu. Chapter 4 Creating A Debian Lenny Guest (Image-Based).
He has got me so confused at this point on whether he is installing a Fedora or Ubuntu Guest. On that 1st page all steps for making a Host is completed on my Host computer. [URL]. I have got the Windows XP disk in the CD ROM ready to go. If you do a Google search on KVM. Any prior instructions just does not work for Fedora 13
I successfully installed the virtual box on my fedora 8 system, and also created a virtual machine with windows xp OS, it works nicely, I try to configure the serial port of my virtual machine and try to configure the path for the port "screen shot are attached" it gives me the error message also the "screen shot are attached" for your review.Is kind of mistake is going on during the path setting, and how to set the path for configuring the serial port of my virtual machine so that I can use the hyper terminal tool of windows.
View 4 Replies View RelatedI am trying to access shared folders in Virtual Box with Host OS being Windows7 and Guest OS is Fedora. Did anyone face a similar problem? I have been going through many solutions but none of them worked out. I am able to keep the required folders in Shared Folders making them Auto-Mount and Permanent. I tried to install Guest Additions from Devices, but I am not sure how to install the Guest-Additions software in Fedora. how to proceed so that I can access files in my shared folder.
View 1 Replies View RelatedI'm looking for virtual machine software that supports dual monitors on a Linux guest with a Windows 7 host.VirtualBox supports dual monitors only for Windows guests. VMware Player was extremely slow, so I gave up. I'm not sure it supports dual monitors, anyway. Can anyone recommend a product for what I want to do?
View 1 Replies View RelatedI am using virtual box with Guest OS Linux Mint on Host OS Windows Vista.I want to log in as 'root'.I typed 'su' at the terminal, then it asked for a Password
View 3 Replies View RelatedI have CentOS 5.5 and try to create KVM virtual machine with CentOS 5.5 as a guest. But when I exec command:
virt-install --connect qemu:///system --name test --ram 1024 --file=/var/lib/libvirt/images/test.img --file-size=10 --vnc --cdrom=/var/lib/libvirt/images/CentOS-5.5-x86_64-bin-DVD-1of2.iso --vncport=10000 --accelerate --os-type=linux --nonsparse --livecd --hvm
ok how do you add a rule which allows a virtual machine to connectto ssh on the main fedora host?so connecting from a virtual machine to the main fedora host installation? I think i have to use an iptables command but not really sure
View 3 Replies View RelatedI've installed VirtualBox OSE and have a couple of guest OS setup. I am running Ubuntu 11.04 and VBOSE version 4.x (the most current). Now this installs the guest OS virtual harddrives to a folder in my home directory. How do I get other users on the same host machine access to those virtual machines within VB? Currently logging in as another user and going to Applications/Accessories/VirtualBox OSE ... the list of guest machines is empty save of course on my login.
View 3 Replies View Relatedyou add a rule which allows a virtual machine to connect to ssh on the main fedora host?so connecting from a virtual machine to the main fedora host installation? I think i have to use an iptables command but not really sure
View 3 Replies View RelatedHow can I run LAMP (Linux, Apache, MySQL, PHP) in a virtual machine (Ubuntu in virtual box) and make it so the web server is accessible locally (and ONLY locally) on the host OS via an ip address?
View 3 Replies View RelatedWill there be any issues installing and then subsequently running a Microsoft Windows Server 2008 R2 installation on a VirtualBox VM on a Linux host (Ubuntu 11.04 64-bit)? I require Windows Server 2008 R2 for a course I'm taking, and I dont have any systems to install/deploy it onto.
Host Machine Specs:
Ubuntu 11.04 64-bit
4GB RAM
350GB Disk Space
Nvidia Quadro system
My company's default OS is Windows 7. I convinced my manager so that I could use Fedora 12, since I am mostly familiar with development environment in Fedora. However there are a few things I need in Windows 7, and I want to stop going back and forth in two OS'es in dual boot-up setting.
I've searched online for easy way to use the existing Windows 7 as guest virtual machine. I first tried VMware's Vcenter Converter Standalone in Windows 7, but it failed with some error code, and searching the particular error code didn't turn up any solution. I also tried to use Sun's VirtualBox, but I get segmentation fault error in Fedora. I tried to see if VMware server has a tool, but installation exists with an error, and searching the web for the error code didn't turn up anything either.... I wonder if I am having this much difficulties because I am using x86_64 version of OS'es.
Anyhow, if anyone has done it successfully - using existing Windows 7 as guest virtual machine in x86_64 version of Fedora 12.
My Windows guests see my VMware Host Only folders as \.hostShared Folders. But when I try to see them from a Linux guest, all I get is frustrated. No permutation of that seems to work. Because the Windows guests see the shared folders I know the host is doing its part in providing them. After two days of not finding an answer on the VMware Workstation forum I finally figured out that the problem really is how to look for them with Linux. With Linux I can turn off all NICs accept the Host Only NIC, put smb://172.16.138.1 into the address bar and see all the shares on the host, but not the folder designated as the host only folder. How to look for the shares with Linux?
View 3 Replies View RelatedI have installed Red Hat Eterprise Linux as a Guest OS using VirtualBox on the Host OS Windows XP SP 2 on my PC. I want to access my local / intranet web site from this Guest OS which is running on the top of on Windows XP, the Host OS. I am not sure as to what IP Settings I need to do. Though I am able to access Internet from both the OSes. The IP of this Guest OS is:
Code:
[root@localhost ~]# ifconfig eth0
eth0
Link encap:Ethernet HWaddr 08:00:27:30:E9:72
inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe30:e972/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1871 errors:0 dropped:0 overruns:0 frame:0
TX packets:1926 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1427538 (1.3 MiB) TX bytes:415769 (406.0 KiB)
Interrupt:11 Base address:0xd020
[root@localhost ~]#
I have installed Microsoft Self Loop Adapter (Autoconfiguration IP Address: 169.254.25.129) on the Host OS Windows XP. There is another adapter: VirtualBox Host-Only Network whose IP Address is: 192.168.56.1. So, how can we access intranet web site from the Host OS to Guest OS and vice versa. I also want to access this virtual Red Hat machine /console from within windows XP using PUTTY application. From Windows XP the Red Hat machine is pinging. But when I use the IP to access the machine through PUTTY it doesn't work.
how to connect OS "ubuntu 9:10" as the host, with Qemu as a guest.?I can not connect from the host to geust, how to connect??I use Samba to connect the host to the guest.I was able to ping from guest to host, but from host to guest can not ping .. why?
View 1 Replies View RelatedI have ubuntu-8.04.1-server installed on virtual machine. It works perfect. Now, I made copy of this virtual machine. I started that copied machine and it works fine, except one thing: network does not work!
I have several others VMs with freeBSD, openBSD or Windows on it, but only ubuntu machine hes network problem after coping. I tried some other VM with ubuntu on it - same problem! I downloaded VM with ubuntu - same problem.I take a look into /etc/network/interfaces file and it looks just as it should (same as before coping) but ifconfig command returns parameters for lo only (before coping there was eth0 and lo).
My Windows guests see my VMware Host Only folders as \.hostShared Folders But when I try to see them from a Linux guest, all I get is frustrated. No permutation of that seems to work. Because the Windows guests see the shared folders I know the host is doing its part in providing them. After two days of not finding an answer on the VMware Workstation forum I finally figured out that the problem really is how to look for them with Linux. With Linux I can turn off all NICs accept the Host Only NIC, put smb://172.16.138.1 into the address bar and see all the shares on the host, but not the folder designated as the host only folder.
View 3 Replies View RelatedI have VMWare on a notebook, guest Windows running on Linux host. The network in that virtual machine is configured as NAT. I want to share/transfer files from Linux (host) to Windows (guest). So I leave sshd always running on the notebook, I go into Windows and run an SSH/SFTP program. My Wifi router has address 192.168.1.1, my desktop has address 192.168.1.2 and my notebook has address 192.168.1.3. On the notebook, that SSH/SFTP program connects to 192.168.1.3 (i.e. the notebook itself) and everything works fine. But it's a notebook, and when I leave home with it, 192.168.1.3 is no longer accessible. How can I let the guest OS connect to the host OS when I'm away from my Wifi network?
View 1 Replies View RelatedI have rhel5 as host and guest is xp and rhel5, how will I make a network between them.
View 3 Replies View RelatedRecently I've been unable to load web pages, hosted on my Ubuntu Guest in Apache, from my OSX Host. In fact, I can no longer even ping the Guest OS from the Host. In the past, when I did ifconfig on the Guest, I got an IP of 10.0.1.n. Now I'm getting 10.0.2.15--the default NAT Address. The thing is, I didn't change any settings recently. What I did do is run software update for OSX, Ubuntu, and updated VirtBox.
Current Versions:
VirtBox 4.0.8 r71778
Host: OSX 10.6.7
Guest: Ubuntu 11.04
why I can no longer access my Guest OS from my Host? I spent hours on this last night, to no avail. What would cause the Guest IP to change from 10.0.1.n to 10.0.2.15? As I say, I manually made no config changes.
I am running VMware workstation on a Linux host and WinXP guest using NAT. I have shared a folder on WinXP, and I am able to mount it on the linux host with:
mount -t smbfs -o username=Administrator,password=mypasswd //192.168.100.129/Shared /mnt/tmp
This works fine. However, I want to mount the same folder from a different linux machine (not the host).
I added port forwarding in /etc/vmware/vmnet8/nat/nat.conf:
[incomingtcp]
#445 = 192.168.100.129:445
If I run:
mount -t smbfs -o username=Administrator,password=mypasswd //external_ip_number/Shared /mnt/tmp
I am getting:
mount error 112 = Host is down
Refer to the mount.cifs(8) manual page (e.g.man mount.cifs)
It doesn't work even if I try the above command from the linux host itself. It only works if I use the internal IP number. I suspect vmware is not forwarding port 445 but I am not sure how to verify it. I am not running smbd on the linux host, in case that make any difference. I didn't think that was required because the server is really on the WinXP and the linux is just a client.
I'm looking for a SIMPLE solution for printer sharing. I have an HP printer attached to my Linux host (prints fine from there). I want my XP box to be able to use this printer as well. I can ping my XP box from my Linux box (and vice versa), and the XP box has the HP print driver installed.When I go into my XP box and try to add a printer, I click "A network printer or a printer attached to another computer", then "Connetc to a printer on the Internet or on a home office network" and enter my printer.I'm using the printer name as show in CUPS. I also tried it without port 631. Either way, I get an error message saying "Windows cannot connect to the printer. Either the printer name was typed incorrectly or the specified printer has lost its connection to the server.
View 5 Replies View Related