OpenSUSE :: Setting Up Virtual Box Again
Jun 19, 2010
I am trying to install again virtual box after a new clean install of 11.2. After install and running: /etc/init.d/vboxdrv setup
I get error:
Stopping VirtualBox kernel module done
Recompiling VirtualBox kernel module failed
(Look at /var/log/vbox-install.log to find out what went wrong)
Here is the log file:
Makefile:162: Warning: using /usr/src/linux as the source directory of your Linux kernel. If this is not correct, specify KERN_DIR=<directory> and run Make again.
Makefile:170: *** Error: /usr/src/linux (version 2.6.31.12-0.1-desktop) does not match the current kernel (version 2.6.31.5-0.1-desktop). Stop.
View 6 Replies
ADVERTISEMENT
May 23, 2011
The only things i need out of it are: mars_nwe (Netware server under Linux) and a reverse telnet server (the dos machine is a bbs) I need the virtual server to support a very old dos machine, and while i COULD use samba for drive mapping, the VNC server I'm useing on the dos machine is a progrm called TINY which pretty much means i'm stuck useing the novell dos network stack.
how best to configure opensuse for this? I'm running the install off of the live-dvd which has quite a bit selected by default. I'm not in need of an x-server or a desktop manager, as this will be a set it up and forget about it once it works VM
View 1 Replies
View Related
Oct 31, 2010
I have video files in multiple directories. Is there a way to setup a vitrual directory that shows that content of all the video directories. Sym link is not good enough since the content of these directories changes all the time.
View 3 Replies
View Related
Oct 26, 2010
So I'm wanting to learn a bit more about networking (ok, ALOT more), and I was thinking of trying to setup a virtual network via Virtualbox on my desktop, and as seperated from the internet as humanly possible (preferably no connection whatsoever).
Ignoring a few of the obvious problems (like my little dual core potentially running half a dozen VMs on 2G RAM), I am wanting some guidance as to what programs I would need or some documentation on setting things up.
I have no real clue where I would want to start with this, but I want it as a testbed for future toying with, to learn from, and just generally as something for me to hack at to see what does what, how, and why.
View 6 Replies
View Related
Aug 14, 2010
Can I copy my virtual box VM windows XP virtual-machine files to another Linux computer and run the machine on that computer while I keep on running it on the original computer?
This question is about technical possibilities, not licences.
View 2 Replies
View Related
May 21, 2010
I have virtual XP set up with VirtualBox and I can't (been trying for a couple weeks now) to get an Internet connection on the VM. I have tried using NAT, bridged adapters and nothing.
View 1 Replies
View Related
Feb 22, 2011
I am trying to set up an Apache2 virtual host to test sites I make from my own computer.
I used this guide to set up my LAMP and vHost, The LAMP stack seems to be working great, but I run into some problems when I try to set up a vHost
As described in the guide I
1. made a new directory in my home folder /home/[myname]/www/test.dev to put my site in (it currently contains a simple index.html file as a test).
2. In /etc/apache2/sites-available I copied the file "default" and renamed it "test.dev"
3. I edited the content of "test.dev" to look like this:
Code:
4. I enabled the site using the command "sudo a2ensite test.dev". I then restarted apache "sudo /etc/init.d/apache2 reload".
5. I edited the hosts file: "sudo gedit /etc/hosts" to look like this:
Code:
6. I restarted apache "sudo /etc/init.d/apache2 reload".
Now if I enter "http://test.dev" in my firefox's adress bar I just get the apache2 "It works!" site. What is going wrong to cause firefox to show the "It works!" page rather then my own test site?
View 1 Replies
View Related
Jul 9, 2010
I am having trouble setting up name based virtual hosting on my Linux Webserver. I have two websites: I need the lowcostchemicals site to use a SSL certificate which I have already created and added to a folder [URL] The lowcostchemicals site needs to go into the folder:[URL] The [URL] site needs to go into the folder [URL] I have tried to set up the virtual hosts but all of the sites go to the root folder: var/www/html/
View 1 Replies
View Related
Jul 12, 2010
How to change the console login prompt settings in slackware 13.1 x64? I tried googling but couldnt find anything, maybe I dont know what it's called.. I mean when the system boot and boots into console asking login info, how to reset the console to new page/clear screen(clearing all the boot up info lines) before it prompts to login. Like for example if after logged into a tty I type exit, I want the screen to refresh(reset?) such that all screen info is cleared and only login prompt is shown on the top left of the screen, like in fedora shell prompt.
View 2 Replies
View Related
Mar 31, 2011
i must make this work with the use of virtual pc's. I have vm player and installed fedora ( the latest version ) and one xp . So i have 2 virtual pc's. I'm making it simple for start so i can add more pc's when i see that it is working. I have setup a dhcp server at the fedora virtual pc. The fedora virtual pc is like a soho router. The xp pc is getting ip from dhcp while the fedora one has a static one.
My pc is behind an adsl router. Both virtual pc's can see each other which means i have no connectivity issues.Im trying to setup a squid proxy ( transparent one ) so for example the xp pc can access porn sites and such. I used all required configuration for the squid to work and started the service. Ive also inserted with iptables the commands to forward all incoming port 80 packets to port 3128 ( the squid ). It doesnt seems to be working and i thik i know why but i dont know how to fix it.
Because the xp has a gateway at 192.168.1.1 ( the adsl router ) packets go directly to it and not to the soho router ( fedora virtual pc as i intend to do) What can i do to solve this problem ? How can i forward all packets to go to the fedora virtual pc first and then the fedora pc to forward them (if necessary) to the adsl router? PS. I used Bridged connection on the networking configutration on the vmware player ! If you also want i can post the code for squid or iptables if needed !
View 1 Replies
View Related
Mar 17, 2011
I am in the process of setting up a couple of virtual servers in a cloud environment. I am currently working on my application server (Server 1) and am stuck on the creation of my ruleset for this server.
I need to allow SSH, FTP, HTTP, HTTPS, and PING on this server. This server will also need to be able to talk with a couple of database servers as well as a memcache server (all internally within my cloud environment)
I have been reading on iptables, since I have never messed with them before, and have come up with the ruleset I will paste below. I have taken other steps to secure my server...changing ssh port, not allowing root to login via ssh without logging in as a user, turning off unnecessary daemons, editing my hosts allow/deny files, just to name a few.
I am a newbie to iptables, so I would love a bit of helpful advice, criticism, and even a good explanation why I should add or remove or edit something. I really want to know the how AND the why!
[Code]...
View 4 Replies
View Related
Sep 6, 2010
Has anyone gotten XP Mode to work in Win 7- while Win 7 is running in VBox? Everything installs seemingly error free- XP Mode, and the two updates. I then start Win XP Mode. The computer goes through 25 minutes or so of setting up XP mode for 'first use'. At the end, a message appears: "Could not complete setup. Please try again". In Win7, I've removed XP Mode from Programs and Features, and reinstalled. No change.
Using 11.3, Oracle/Sun VBox 3.2.8 with guest additions, and Win7 Ultimate with the three required downloads (after selecting Win7 Ultimate 32bit and English) Download Windows XP Mode
View 6 Replies
View Related
Feb 16, 2010
I've been trying to understand how Linux creates the network/interfaces on a machine (been reading the Linux admin guide), but as I'm pretty new to this subject, I've got lost in the forest.
To provide with my goal:
1.) Learn about network setups on Linux
2.) Be able to maintain my own (virtual) network
3.) Configure my (virtual) network
View 1 Replies
View Related
May 31, 2011
On OS 11.4, 64 bit box. Has anyone figured out how to make the VM hdd larger after the original one has gotten full? I've search the forum but all the searches come up with ways that confuse me.
View 3 Replies
View Related
May 23, 2011
have installed kvm using yast and now when I try add new mashine I am getting message "virtual monitor is not running and to run xen I need restart my opensuse, which I did and still getting the same message... thats what I am getting when going to manager virtual mashines -> add new mashine : Traceback (most recent call last):
[Code]...
View 3 Replies
View Related
Jan 10, 2011
I am trying to install a 11.3 virtual machine through Xen on a 11.3 installation. I am trying to install from the opensuse DVD. I get to this point, setting up everything (I can only do paravirtualization) Then the DVD spins for a little while and after that I am returned this error message "device 0 vif could not be connected opensuse....."
I tried a bunch of different settings in the previous screen and I always end up with this error I googled around and it seem to be a problem in different distros but I could not spot a solution at all
View 9 Replies
View Related
Jul 3, 2009
apache virtual host to limit the concurrent connections of virtual hosts? Taking into account the host of each virtual user's home directory can also have more than one subdirectory, which should be restricted to a subdirectory. Is beyond the control of the operation of these sites in a subdirectory. Best local restrictions or limitations to the overall situation.
View 1 Replies
View Related
Aug 23, 2009
I have spent considerable hours searching forums and googling. I have yet to find out what "lm-sensors acpitz-virtual-0 Adapter: Virtual device temp1:" is actually looking at. I have an Abit IP35 motherboard with Ubuntu 9.04 installed.
Here is the output from sensors:
Virtual Device Temp 1 keeps going up to 121 degrees and the computer shuts down. None of the others overheat. Also, my bios does not show my voltages to be set like it lists above. The bios in the motherboard is the latest from Abit.
View 9 Replies
View Related
Aug 25, 2009
When I create virtual ethernet interface and do a ping -I <v_int> <host> the outgoing address is the one of the physical interface and NOT the virtual interface.Is there no chance that trafic will go out with virtual interface address??Incoming trafic is done well i.e. responds to the virtual interface have the virtual address.
My problem is that I have 2 modems and want to check both default gw behind the modems.
If I do a "normal" ping both are reachable over default route even the modem which is not the default route will not work because ping goes over the working modem.So I have 2 routing tables and want to route the virtual interface to one modem the other to the other modem
View 3 Replies
View Related
Jun 29, 2010
I would like to configure and SAN disk. But I do not have a physical SAN disk. Is it possible to create and configure a Virtual SAN disk and work on it with virtual machines?I have around 400GB of space in my Laptop.
View 7 Replies
View Related
Apr 21, 2010
I'm having an issue with setting up the virtual hosts on my web server. I have 2 virtual hosts (example1.com, example2.com). example1.com works but example2.com is sent to the index file of example1.com. I did some searching on google and it seems the problem might be with my /etc/hosts file.
First virtual host that the second is also directed to...in sites-available/sites-enabled (note port 80 is blocked by my isp so I use 8080)
Code:
Second virtual host file
Code:
And my hosts file
Code:
# The following lines are desirable for IPv6 capable hosts
Also I'm using a dyndns.org...would that make a difference?
View 2 Replies
View Related
Jan 5, 2010
I have been unable to create any type of Windows VM in Xen. Every time it tells me that the processor(s) in the machine do not support full virtualization. After some research, I found several articles regarding the vmx setting in /proc/cpuinfo not showing up when the xen kernel is booted versus it showing up in the default kernel. Of course, I am not seeing the vmx extension in /proc/cpuinfo after I boot to the xen kernel. In the other posts where other people are in the same situation, the only resolution is to upgrade to the 2.6.16 xen kernel. I am already past that:
linux-vxke:~ # uname -r
2.6.31.8-0.1-xen
yet I am still unable to create any form of Windows VM. I have even seen that some people are able to create a partially virtualized Windows VM, and they report that the message is only a warning. However, I am unable to get past this message. I am running a Dell Optiplex 760 with an Intel Core 2 Duo E7300, and I have the VT-x setting enabled in the BIOS. Has anyone else seen this situation or have any thoughts on why this is happening?
View 6 Replies
View Related
Jan 26, 2010
I need a Etext reader to help me read my txt books. I can not use the RFBD or get the Virtual box to work! Both tread told me to Not Try! so what is a etext reader for the txtbooks.
View 2 Replies
View Related
Feb 8, 2010
I am trying to find a good virtual keyboard that is in Japanese. there doesn't seem to be much options for virtual keyboards, let alone one in japanese. The only one I have found is xvkbd, but it is very limited and somewhat glitchy. I tried setting it to Japanese, but all that does is add a button to switch to japanese that you annoyingly have to hit every time you want to enter a character. And not only that, even though the keyboard is in hiragana, it inputs katakana. Are there any other options for a virtual Japanese keyboard, or at least a way to get xvkbd to input hiragana?
View 7 Replies
View Related
Feb 13, 2010
I have openSUSE 11.2 x64 natively installed on my PC.
What is the best virtual machine that I can run on openSUSE in order to run XP Pro x64 and Windows 7 x64.
By best I mean opensource, lightweight, and stable.
View 7 Replies
View Related
Jun 26, 2010
I installed openSUSE 11.2 and works great. The only problem I have is that I can use the XEN virtual machines only as a root. If I login as a normal user and open the Virtial Machine Manager I receive the following message:Virtial Machince Manager Connection Failure:Unable to open a connection to the Xen hypervisor/daemon.
Verify that:
- A Xen host kernel was booted
- The Xen service has been started
[code]...
View 1 Replies
View Related
Jul 26, 2010
I ma new in OpenSuSe and I want to create virtual Machine using the graphical interface Xen of Opensuse 11. I did'nt find a good tutorial ton use it or a gut getting started with xen in Opensuse.
View 1 Replies
View Related
Sep 4, 2010
I previously had my Virtual Box install of Ubuntu set to have the Network via "host-Only Adapter". But recently I needed to get on the internet on that install, so I changed it to "NAT" and restarted. It still cannot get on the internet! How can I fix this?
Some notes:
1. I have other virtual box installs that CAN get on the internet
2. This one was able to get on the internet prior to setting it to "host only adapter"
View 2 Replies
View Related
Dec 16, 2010
I installed Oracle VM virtual box from software installler.I want to run windows xp on it.But I'm getting following error whenever i click on start(note : I haven't installed xp just created the vdi.):First window: (VirtualBox - Error):Failed to open a session for the virtual machine WindowsXP.The virtual machine 'WindowsXP' has terminated unexpectedly during startup with exit code 1.
The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing'/etc/init.d/vboxdrv setup'as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary.and in the end Bug Buddy reports error.I saved the report file but where should i post it.(Provide link if possible)
View 9 Replies
View Related
Mar 14, 2011
I just installed openSUSE 11.4 and after the installation of VirtualBox I coudn't start it. The icon at the cursor kept jumping but no response. I tried to run the binary from Konsole and I got the following message:VirtualBox: supR3HardenedVerifyFileInternal: Failed to open "/usr/lib/virtualbox/VMMR0.r0": No such file or directory (2)I checked YaST to see which packages were installed:
python-virtualbox
virtualbox
virtualbox-guest-kmp-desktop
[code]...
View 1 Replies
View Related
