apache virtual host to limit the concurrent connections of virtual hosts? Taking into account the host of each virtual user's home directory can also have more than one subdirectory, which should be restricted to a subdirectory. Is beyond the control of the operation of these sites in a subdirectory. Best local restrictions or limitations to the overall situation.
View 1 RepliesI'm having an issue with setting up the virtual hosts on my web server. I have 2 virtual hosts (example1.com, example2.com). example1.com works but example2.com is sent to the index file of example1.com. I did some searching on google and it seems the problem might be with my /etc/hosts file.
First virtual host that the second is also directed to...in sites-available/sites-enabled (note port 80 is blocked by my isp so I use 8080)
Code:
Second virtual host file
Code:
And my hosts file
Code:
# The following lines are desirable for IPv6 capable hosts
Also I'm using a dyndns.org...would that make a difference?
What is the (officially) proper way to configure Apache so that a given IP address can have two or more virtual host names, each going to different distinct configurations (e.g. with different DocumentRoot, Alias, etc), and also do this for the IP address so that it goes to a designated configuration rather than defaulting to the first or a random host name?
Apache documentation does not appear to address this. If so, it has it hidden in a non-obvious place.
I run couple of sites on a virtual hosting environment and I am in need of adding additional SSL for a different domain name. From what I read on some forum topics indicate that SSL cert requires different IP address. meaning one cert for each IP. Is this true? If so, then I'm having some difficulties understanding the benefits of running virtual host if a server can't host multiple secured site through single IP. Any way to run multiple ssl site within virtual host environment. I'm hoping for a possible workaround.
View 3 Replies View RelatedFirst of all I've looked at "similar threads" without finding an answer. I'm setting up Name-based VH using an IP as the base. The OS is CentOS 5.4
My config looks like:
NameVirtualHost 12.345.678.90:80
#
# NOTE: NameVirtualHost cannot be used without a port specifier
# (e.g. :80) if mod_ssl is being used, due to the nature of the
# SSL protocol.
[Code]...
The names are of course not in DNS so to access the server from my local Windows machine I had to use the hosts file: 12.345.678.90 dev1 Entering dev1 in my browser *does* take me to the server but it takes me to default VH (DocumentRoot /var/www/html). What am I overlooking?
I have just setup two Apache virtual hosts and I was wondering how I could link them to different domains so that they could be accessed from another machine.
View 7 Replies View RelatedThis really has me baffled! I'm running Apache 2.2 on Windows Server 2003 (I know, my first blunder). I can edit existing virtual hosts without a problem, for example, I can change this existing vhost to point to a different document root and it works fine:
<VirtualHost *:80>
ServerName existingsubdomain.mydomain.net
DocumentRoot "C:/Inetpub/wwwroot/mydirectory"
</VirtualHost>
But the moment I try to add a new virtual host, it doesn't get recognized! When I try to browse to it in a browser, I get a "Server not found: Firefox can't find the server at newsubdomain.mellemallc.net."
<VirtualHost *:80>
ServerName newsubdomain.mydomain.net
DocumentRoot "C:/Inetpub/wwwroot/mydirectory"
</VirtualHost>
Can anyone point me in the right direction as to why this may be happening?
I am trying to run two web servers (Virtual Hosts) on a single Linux Centos 5.5 box with a single IP address 192.168.0.182. I did all the pre-installation requirements such yum install mysql, yum install mysqladmin, service httpd start, service mysqld start etc etc.In /var/www/html directory, I have two folder called server1 and server2. These two folders have the necessary web server php script files and folders. I opened the browser and managed to install the script on one web server successfully. When I put the IP address 192.168.0.182 on the browser address bar, the page loads without any problem. Now I would like to be able to install the other web server script and I don't know how to?Here is my httpd configuration;
<VirtualHost *>
DocumentRoot /var/www/html/server1
ServerName development.mysite.com
[code]....
How to best manage both http and https pages on the same apache-server without conflicts. For example, if i have both 000-default.conf and 000-default-ssl.conf pointing to mydomain.com, and don't want users who visit mydomain.com without specifically type the https-prefix to be redirected to the https-page - how to handle users using browserplugins such as https-everywhere etc?
Another option would be to create a subdomain ssl.mudomain.com and have users who want to reach the ssl site to have to type ssl. I have tested several things with https everywhere enabled in my own browser, and it seems really hard to make this working the way i want, in one way or another i always end up getting redirected to the ssl-site automatically.
The reason i need this to work is because i run one site that i don't care much about SSL, that is the "official" part of that site, and i also host some things for friends and family on the SSL-part. This would not have been a problem if it wasn't that i use self-signed certificates for my ssl-site and the major user become afraid when a certificate-warning pops up in their browser and therefor leave the site.
I am upgrading my server and I have a lot of sites. Since I cannot take my server down for a few days, maybe a week until I manage to migrate all the sites to the new machine, I figured I could migrate them one by one. After migrating one, I would somehow tunnel the requests of that name virtual host to my internal machine. When everything is migrated, I would then switch the machines, update ip's and stuff and everything will work just fine.
However I cannot seem to find a way to do this tunneling. is this at all possible? If not, what alternatives do I have?
On my server I have connected domain: www.my-first-domain.com which is installed in /var/www/first
For that domain I have installed virtual host.
Quote:
I dont know why, when I will put address my-first-domain.com instead of www.my-first-domain.com server redirect that domain to folder /var/www/.
[Code]....
What I want: multiple virtual hosts with ssl and only 1 ip address: In my example: server = 192.168.227.129
[Code]....
I'm running Apache with mod ssl, with a php app using ssl. https://www.example1.com
I've made a virtual host to host a simple static site which I dont want SSL for.
When I try and get to the site it redirects me to [url] which gives a certifcate error and shows the site from example 1.
Config below:
I have 4 domains registered through godaddy. I have a dell poweredge box with one static IP hosted somewhere. I want the 4 domain to resolve to four different sites. I have already created 4 different sites in apache with four different aliases and has enabled it.
eg
alias /a /var/www/a
alias /b /var/www/b
alias /c /var/www/c
I want to acomplish.
www.a.com ==> xx.xx.xx.xx/a
www.b.com ==> xx.xx.xx.xx/b
www.c.com ==> xx.xx.xx.xx/c
I tried with godaddys forward with masking option. It works but I can't hide xx.xx.xx.xx/a in the links. Whats the best approach? One limitation is I cannot use the webhosts name servers. How do I set this up with name based virtual hosting? Do I setup a DNS server in the box?
I do have a dns host name for my box which is publicy accessible. Some my.ca.examplehost.net
I'm using Apache 2.2 to host multiple subdomains using a single SSL certificate (a wildcard certificate e.g. *.mydomain.com) and, yes, it works! Everything seems to be served correctly and the browsers are pretty happy.
And you can also have the non-SSL sites (virtual hosts on port 80) on the same IP. (That's covered elsewhere)
For those that want similar functionality here's my discovery...
My configuration is like this:
ssl.conf:
Code:
I would have to say that I don't believe that this will work if you are not using a wildcard SSL certificate and having anything other than subdomains under that wildcard.
It is somewhat limited in scenario where this is useful, but for a set of company websites that should be under SSL, this can be tremedously useful when you have a single IP.
I'm running XAMPP 1.7.2 on Ubuntu 8.10 (Linux dt19.im.local 2.6.27-14-generic #1 SMP Tue Aug 18 16:25:45 UTC 2009 i686 GNU/Linux) and am using the PHP 5.3.0 Apache module as standard. For one virtual host I'd like to use PHP 5.2.X as it is part of a project which has a lot of legacy code which is not compatible with PHP 5.3.0. The virtual host configuration block and the applicable directory directive are as follows -
Code:
Checking phpinfo() output on the above virtual host (or using the default virtual host directive and accessing it via http://localhost/[SNIP]/[SNIP]/phpinfo.php rather than [url] shows PHP 5.3.0 is running. After applying minor tweaks such as adding ScriptAlias or SetEnv options the problem persists. I've Googled for a good while and have checked the permissions and the like and tried the advice of other users (XAMPP or otherwise) either resulting in PHP 5.3.0 being used or a HTTP 400 bad request/invalid URI error. I've stuck with the configuration above as this is correct according to the PHP manual.
FYI cgi-bin/php-5.2.6 is a soft symbolic link to /opt/lampp/bin/php-5.2.6 (I've added the FollowSymLinks option to the cgi-bin directory directive in httpd.conf). I've tried installing php5-cgi from the Ubuntu repos and setting it up in a similar way, to no avail. I've also tried copying the executables into the cgi-bin directory, pointing the Action line directly to bin/php-5.2.6 and dropping the -c /opt/lampp/etc/php.ini-pre1.7.2 option in the Action line. I've even tried commenting out the LoadModule lines for PHP which results in a HTTP 400 bad request/invalid URI error. This demonstrates the fact that the PHP CGI use is being ignored.
I've checked httpd.conf and the extra/httpd-*.conf files and ensured all required includes are being loaded. I know that it's probably something stupid on my part which is causing this! Given that I've tried PHP CGI builds in the Ubuntu repos I don't think this is an XAMPP-specific issue.
One of our Apache servers, version 2.2.3, is running three virtual hosts on it. However, while two are accessible, gray.mgh.harvard.edu, www.plastimatch.org, the third, cmrol.mgh.harvard.edu cannot be reached by any remote host.
I am at a loss as to why this is occurring. To that end, I am including the httpd.conf file as an attachment in the hopes someone can see what I missed, and help correct this issue.
I'm trying to figure out why Apache is ignoring SSL Cipher statements when placed inside a Virtual Host. Specifically I'm trying to disable SSLv2 and only allow SSLv3 or TLSv1
In httpd-ssl.conf I have the following
Code:
And when I try and connect, I get the expected results.
Quote:
In my virtual host statement I have
Code:
The only difference between the two is the httpd-ssl.conf has -ALL in the CIPHER, and the virtual host entry has ALL. However if I try and change the ALL statement in the virtual host entry to -ALL I get the following error in my logs & get no content.
Quote:
Why it's not working in the virtual host statement? Unfortunately as many of you are probably aware it's impossible to gain PCI certification with SSLv2 enabled.
I am having two domains. for ex: www.example1.com and www.example2.com. These two domains need to be hosted under one ip. Yes by configuring name based virtual host we can do that. But, my question is my first domain(www.example1.com) need to be hosted by Apache web server, and my second domain(www.example2.com) need to be hosted by Tomact. Is it possible to configure name based virtual host for a scenario like this.
View 6 Replies View RelatedI was trying to setup SSL Client authentication on only one virtual host. Here is a brief excerpt sample of my conf file for the virtual host:
<VirtualHost xx.xx.xx.xx:443>
SSLRequire %{SSL_CLIENT_S_DN_O} eq "something"
SSLVerifyClient require
SSLVerifyDepth 2
</VirtualHost>
But when I try to check for syntax errors tells me SSLRequire not allowed here I do not want to add SSLRequire on the main httpd.conf because I only want it for one virtual host. The rest of the virtual hosts do not need it.
I'm trying to install two instances of OCS Inventory on the same machine using virtual hosts in apache. The apache configuration for it is in it's own file and it works fine without any virtual host. If I add it apache refuses to start without giving any error message. I narrowed it down to some lines loading perl modules, and if I comment them away apache will start again. Some of the modules work, but some of the ones specific to OCS Inventory will not work. I can't understand what the difference is between loading it in a virtual host or not, it doesn't make any sense to me!
View 2 Replies View RelatedI'm not sure is this is possible or not, but what I would like to do is take my public address mydomain.com and configure a virtual host something.mydomain.com only instead of having the content on the same server I would like it to point to the IP of my virtual machine that is in my private network and display that page publicly. Does anyone know if this is possible, or how to do it? I have done this with port forwards, but would like them both to be on the same port.
View 3 Replies View RelatedIs there anyway for one Virtual Server to access the main host, or another Virtual Server? Or would they be totally 100% independent?
View 5 Replies View RelatedI want to create a virtual host and virtual ip in proftpd linux centos. can anyone please help me on this,I'm new in linux.
View 8 Replies View RelatedI installed apache server on my Fedora 12. Its showing the test page 127.0.0.1, but when I give the address 97.168.234.76 (0r www.chaalu-kam.com), it tells that the requested url could not be retrieved.
I have made the following additions to the /etc/httpd/conf/httpd.conf file
Code:
In addition to this, I have added this to my /etc/hosts file
Code:
I wanted to test the Apache server on my laptop only by putting an html file in /var/www/html and naming it as index.html. I want this index.html page to be displayed when I put www.chaalu-kam.com in my browser. What should I do? My firewall is off too
I'm wondering if this is even possible before I start the learning curve with Ubuntu and apache virtual hosts.
I have a static external IP address that resolves to the various domain names I will be using. I have a web server inside my network with a private IP address and any http request to the firewall is forwarded to the webserver on the appropriate port. This setup works well when using the same web page/configuration for all of the domains.
Will it be possible to use named virtual hosts in this configuration, or will the NAT'ing interfere?
I am trying to configure Apache to handle virtual hosts. For this I un-commented the line in httpd.conf that say
Include /etc/httpd/extra/httpd-vhosts.conf
Then I included the following in httpd-vhosts.conf:
<VirtualHost *:80>
<Directory /var/www/git.localhost/gitorious/public>
Options FollowSymLinks
AllowOverride None
Order allow, deny
Allow from All .....
I'm having trouble implementing SSL on a AvantFax login screen. I've created the the certificates and keys and have them stored in /etc/apache2/ssl and I'm sort of stuck now. I've been following a guide but any changes to the conf files leads to errors. The system I'm using is Debian 5.0
[Code]...
I currently have an Apache Web Server running on Ubuntu 10.4 and I use a DynDNS service to make them accessible to the outside world via a domain and/or subdomain.
My configs currently look like this:
<VirtualHost *:80>
ServerAdmin <obscured>@<obscured>.com
ServerName <subdomain>.<obscured>.com
ServerAlias <subdomain>
[Code].....
This works fine from access outside of the network and all subdomains resolve to the correct directory.
The problem I am having is with accessing a subdomain over my internal network.
I can access the Web Server using the server's IP address: http://192.168.1.123/ but this always takes me to the same virtual host and I don't know how to distinguish between different virtual hosts (different subdomains).
Ideally I would like to access the same subdomains using http://<subdomain>/ where <subdomain> is the same as the subdomain attached to the external domain name.
I have Apache up and running and have a few virtual sites enabled. All these sites belong to the same user and group and the directory root for each site is in /home/{same-user}/www/{site-name}/htdocs/
I use Samba to connect from Windows to these directories and by default, files and directories are saved as the {same-user} and {same-group}. My question is, would it cause a problem if I changed the user and group in the virtual server directives in /etc/apache2/sites-available/site.conf files, giving apache permission to write to these files and directories. In the past I have changed the user and group to www-data (the default) but this seems inefficient an cumbersome compared to what I intend to do.
I use the server mostly for development, although at times I have a small site or two available to the public. Before I do this I want to be sure I'm not leaving a gaping security hole by changing these things. If this is all wrong, what is the standard way of running virtual hosts from apache and what is the standard document root for virtual sites?