OpenSUSE Wireless :: Support The Driver Of Ar9271?
Mar 18, 2010when will support the driver of ar9271 for linux?
View 2 Replieswhen will support the driver of ar9271 for linux?
View 2 RepliesAnyone knows what is the right driver for this device? It is not being recognized by the system, and there is no Atheros AR9271 on url
View 9 Replies View RelatedI'm trying to get a TP-Link TL-WN821N WiFi USB dongle to work. I bought it because I thought it was based on the Atheros ar9170 chip (which is supported in Squeeze), but I've since learnt that it was based on the ar9271, which is only supported from kernel v2.6.36 on. I've read several threads on the subject, but I'm still confused about what I should exactly do. Since it is stuff that can potentially make the partition unbootable, I prefer to ask rather than to tinker.
I've read that upgrading the kernel would do the trick. The Liquorix kernel is especially recommended in one of those threads. However Liquorix only supports Sid and Testing. Apparently, you still can install it by fetching gcc 4.5 from the Sid repository, then install it... I'm a bit wary of screwing things up though... Another route appears to be the compat-wireless tool. I've downloaded the latest 2.6.32 release of compat-wireless (see here), but there's no reference to the ar9271 in the README. Is it appropriate nevertheless (they refer to an online list of supported drivers that was updated after the release... not sure what to make of it)? Otherwise, can I install the so-called "bleeding-edge compat-wireless" with a 2.6.32 kernel? BTW, I know that I'll also need the ath9k_htc firmware to be installed.
I am using an HP G60 laptop with a built in wireless NIC but am unable to get the wireless connection working. I have followed the advice in the sticky messages above and have included the information below. I know the wireless modem is working as I have got a spare USB wireless dongle running on the desktop (ironically - I can only get it working where it is not needed!!!). The same dongle will not work on the laptop. So it is a config thing and not a hardware issue On a trivial level, left clicking on the Network Manager icon shows the "enable wireless" greyed out. Desktop and laptop are running SuSE 11.3 and KDE4.4.4. I have tried the traditional method as well as knetwork manager and have no success with either. Here are the technical details. Hardware compatibility list provides
[code]...
The platform I used is Intel Q45 chipset. But my customer insist on openSUSE version 10.2. The problem I met is that I cannot get any graphic driver for Q45 chipset upon openSUSE 10.2 developing.
View 4 Replies View RelatedThe AMD tool ATI Catalyst does not provide Linux support for the ATI HD 6850. Running the tool allows the monitor to display in 1080P. However, it results in a watermark stating the hardware isn't supported.
Is there an open source driver that will support this card?
Can the Windows driver be co-opted for Linux?
When will there be an open source driver to support video cards?
No wireless networking. The ethernet works fine, and the wireless interface itself works well in Windows 7 (dual boot). Tried: Ndiswrapper, notoriously quirky, does not seem to work with the XP driver (the oldest driver available for the RTL8191SE). The linux driver offered on the manufacturer's website lacks any installation instructions. I have no clue how to install a linux driver. SUSE seems to have two network managers that are constantly complaining about control: Network Manager and Yast. Neither are great and I am left missing my Ubuntu.
However, my audio only seems to work on SUSE. I have tried almost every distro on this machine. Ubuntu lacked sound and wireless, Fedora played startup sounds, but would not play an mp3 or wav file (fiddling with the mixer did not help). And Fedora also lacked wireless support. PCLinuxOS, my favorite, lacked sound and wireless. Tried some oldies too. ELE, DSL, Puppy, Ubuntu Netbook remix, Vector, Browserpuppy, Crunchbang, Cruncheee (just for experimental sakes) and probably others I am not remembering. So far, installing a free linux distro has cost me 14 dvd-R's and countless hours of installing, reformatting and reinstalling. Part of me really wanted crunchbang to work, as I love the minimalism and blacked-out theme.
I need wireless network access. The wireless light remains red in Linux and pressing the key does nothing to start the device. In Windows 7 it always lights white and works perfectly. Why hasn't SUSE adopted a gui for ndiswrapper? Other distros have it. Why is my brand new laptop, which is by no means abnormal in make or configuration, not 100% supported natively by any Linux distro? I just updated to the new kernel yesterday. So I should be running the most modern operating system available. Yet good-ol Windows 7 is my only fully functional environment.
I'm an owner of a ATI mobility radeon X1300 card. Since ATI tagged my card as legacy, i'm stuck with the open source radeon drivers. Wich doesn't bother me, as i know they are slower and openGL support doesn't equal fglrx. What does bother me is that the current version 7.9 dev. claims to have full opengl support up to 2.1. I'm trying to use a extention that is part of the openGL version 1.3 and it's failing. This is a known issue for a long time now and it really disappoints me. "Compressed textures" is what i'm talking about.
Is there any way to make sure that drivers aren't tagged with something they support if they obviously don't? I guess the KDE4 kwin vs drivers thing is the same as i'm trying to say now. Drivers should be documented with what they effectively support and not what they should support. What can I do to make this public to xorg developers? I could only think about posting this here as i have no idea where to put it elsewere. Could someone please point me in the right direction to where i should send this complaint?
I'm trying to find out when QME2572 (Qlogic) card became support by the kernel. We have a RHEL 5.1 system that is moving to new hardware, however the kernel at this release doesn't support the new hardware, due to the Qlogic card change. I tired the Redhat KB and Bugzilla. Is there a Kernel change list etc I can search. Never really played around with the kernel too much so I'm just after some pointers for looking up this information. Offically its not supported until Redhat 5.3, I'm trying trying to research kernel info so I can tell the customer they have to upgrade.
View 3 Replies View RelatedThis is just to report that I've got 3D support successfully enabled on my Mobility Radeon HD3200 chip with the open source driver on openSUSE 11.2. I did this to replace the proprietary fglrx driver that has already been installed for quite some time on my system.
Uninstalled fglrx, and here we go... Basically what I did was to get the latest X.Org server (1.8) and Mesa from Index of /repositories/X11:/XOrg/openSUSE_11.2 I changed all the corresponding system packages to the versions in that repository. I noticed that I cannot get any 3D support when pairing the last X server with the updated openSUSE 11.2 kernel (2.6.31.12_0.2). With RadeonHD driver it gives me no acceleration at all (No DRI), perhaps it is still intentionally disabled to prevent lockups in r600 cards. With Radeon KDE wouldn't start.
So to get usable driver support I have to update the stock kernel to the one in Index of /repositories/Kernel:/HEAD/openSUSE_11.2 I installed the 2.6.34-rc5-22 kernel and reboot. Immediately I notice that KMS is working, but I could not get DRI to work, presumably caused by the drm being unable to locate two related firmware files (it is there in the kernel, just doesn't know why it is not being loaded). Other than that I do not know why I can't get any acceleration with KMS on. To workaround I passed the 'nomodeset' parameter to the kernel to run in UMS mode instead, and voila! with UMS 2D + 3D accelerations are working. I can enable kwin effects just fine.
Since this is a laptop I need suspend & resume and power management working. Good news is s2ram works perfectly with extra parameter. And all the new Radeon power management options: DynamicPM, ClockGating and ForceLowPowerMode can be enabled just fine! (For UMS you need to generate a xorg.conf and put those options in)Performance is good. So far it's faster than fglrx in some areas and slower in some other area. Now this is truly amazing!
I have an intel 5300 wireless chipset which is not supported in kernel 2.6.25. I am currently using opensuse 11.0, I downgraded from 11.1 since I faced so many other problems. can I setup my wireless driver under kernel 2.6.25? if so, how could i do this?
View 7 Replies View Relatedi have the cd just do not know how to install the driver for my linksys wireless pci card 14e4:4329the device is BCM43XG
View 4 Replies View RelatedAccording to a help page (Wireless Network Card Installation - openSUSE) I need to use ndiswrapper to install the windows driver for my wireless. However it appears the command 'ndiswrapper' was not installed with the operating system. How can I obtain the package for ndiswrapper and install it? Not being connected to the wifi makes this step tricky
View 1 Replies View RelatedI got openSUSE installed, and now am trying to build my wireless driver, using the instructions here: [URL].
The wireless driver is here:
Broadcom.com - 802.11 Linux STA driver
NOTES:
- The (parenthesis: ) are my notes to show you what I was doing.
- Lines with "#" before them are what I typed into Terminal.
- Lines below (Output: ) are what was output by Terminal.
Code:
(run in su:)
lspci -n | grep 14e4
(output:)
04:00.0 0280: 14e4:4727 (rev 01)
(BUILD DRIVER:)
#su
<password>
# mkdir hybrid_wl
# cd hybrid_wl
# tar xzf <path>/hybrid-portsrc_x86-32_v5.100.82.38.tar.gz
# make
(output:)
if 'make' is not a typo you can use command-not-found to lookup the package that contains it, cnf make
(NOTE: with "cnf" it is saying "Cannot Find")
(install "make" command:)
# zypper in -t pattern devel_basis
(It installs 93 packages)
# make
(output:)
kbuild_nopedantic=1 make -C /lib/modules/`uname -r` /build M=`pwd`
make: *** /lib/modules/2.6.34-12-desktop/build: No such file or directory. Stop.
make: *** [all] Error 2
(Tried:)
# zypper in kernel-source
(It installed 3 more packages)
# make
(output:)
kbuild_nopedantic=1 make -C /lib/modules/`uname -r` /build M=`pwd`
make: *** /lib/modules/2.6.34-12-desktop/build: No such file or directory. Stop.
make: *** [all] Error 2
The problem might be derived from the fact I had to install openSUSE in Kernel (F6) > Safe Mode. If I need to install more things, please let me know ASAP! I am wired to my ethernet until then, which means I can't move from this spot until my wireless is working!
I recently upgraded to OpenSUSE 11.4 GNOME on my ancient Compaq Armada E500 (Pentium II processor w/512MB of RAM) and now I'm trying to install my wireless driver with ndiswrapper. I've done this a couple of times before, but I'm having trouble getting ndiswrapper to find my driver. The driver is located in a folder on my desktop, but when I type the command 'ndiswrapper -i home/edwin/Desktop/WPC54G_40826/LSTINDS.INF' I get a message that there is no such file or directory at ndiswrapper's location, which is usr/sbin/ndiswrapper. So how do I get ndiswrapper either to look in the directory where the file is located or get a copy of LSTINDS.INF into the usr/sbin/ directory, which must be accessed as root?
View 9 Replies View RelatedI'm planning to upgrade to 11.4. Is Ralink 3090 wifi adapter is supported in it or not??
View 6 Replies View RelatedI know WEP is frowned upon and enverone should be using WPA. And my hostapd AP is working with WPA clients. However, I would like to alow some older clients that can only "talk" WEP to connect. All my attempts so far have failed! Can anyone point me in the right direction? The hostapd.conf file comments suggests that hostapd can support WEP. There are no contraindications or flags that I can find in the defconfig file that suggest that a WEP module needs to be complied-in to the final make.
View 6 Replies View RelatedI can't get the wireless to work on my laptop its a hp Pavilion dv9700 it has a Broadcom 4321AG 802.11a/b/ g/draft-n Wi-Fi Adapter i cant seem to get it set up.
View 6 Replies View RelatedWhen I installed openSuse 11.4 it doesn't see my wireless card Broadcom. How can I install Broadcom wireless driver ?
View 9 Replies View RelatedI am currently running openSUSE 11.4 on my Toshiba A505 laptop. I'm not certain about the exact model number of the wireless adapter but I believe it's made by Realtek. It does not show up in my list of network connections in YaST so I assume I'll need a driver for it.
View 7 Replies View RelatedI'm using asus usb n-11 wireless adapter.Default kernel module drivers/staging/rt2870sta.ko hasn't id of my adapter. Please add this two strings to next kernel release
--- drivers/staging/rt2870/rt2870.h 2010-05-18 13:09:13.262882659 +0400
+++ drivers/staging/rt2870/rt2870.h 2010-05-18 12:10:20.000000000 +0400
@@ -85,6 +85,8 @@
[code]....
I have only just got my first netbook and when I first installed 11.2 on it it would detect local networks and ask if I wanted to use any of them. Since they belonged to other people and I use a wired connection at home, I declined. I then took my netbook on travels and tried to connect to freely available networks there, but to my surprise it no longer detected them. I tried to go through YAsT and see what needs to be changed but no matter what I tried the wireless option was never offered again.
I have now come back and decided to get to the bottom of this. Here is what I get from iwlist scan:lo Interface doesn't support scanning eth0 Interface doesn't support scanning.It is as if there has never been a wireless capability. Can anyone advise on what to do to fix this?
Found about this website in vector linux site,you can check before you buy if the wireless adapter works with linux or not, so I think is a good tool to check wireless adapters by manufacturer, interface or chipset, it even have links to the drivers websites,
[URL]
My laptop has a built-in miniPCI wireless card that has Atheros AR-5001 chipset and use ath5k driver for wireless G. How do I switch to Broadcom wl driver for Linksys WPC-300n wireless N PCMCIA card?
View 9 Replies View RelatedI installed SuSE 11.2 on my laptop (its wireless and connects to the internet) and am have trouble getting my wireless HP Deskjet j4680 to be found. I tried the printer options as root, but it does not give you an opertunity to select a wireless device to connect too. Does anyone know where I can download software for this. I tried HP, no luck.
View 3 Replies View RelatedI have installed open suse 11.4, gnome but no luck with wireless settings so far. kernel version is iwl3945 here is stuff that i did but it says "scan is deprecated"
linux-1f6k:/home/rajbanul # dmesg | grep firmware
[ 7.249018] tg3 0000:18:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
[code].....
I had a problem with using ndiswrapper to install Windows driver on Netgear WN511TA wireless adapter card. Problem solved by replacing Netgear WN511TA with Airlink101 AWLC6080 PCMCIA wireless adapter to work in my triple-boot XP Pro/Ubuntu Karmic/openSUSE 11.2 Toshiba laptop and using the latest Linux driver version 2.3.0.0 dated January 29, 2010 from Ralinktech site. I followed driver instruction in a Ubuntuforums tutorial (Howto: Ralink RT2860(m) PCI(e) RT2860...on Intrepid).
I am wondering if I can use the same Linux driver (RT2860sta) for openSUSE 11.2 on my triple-boot XP Pro/Karmic/openSUSE laptop, ie. copying over instead of building and compiling driver from source again, because I don't quite understand the build instruction given in the README file of Ralink's Linux driver file. Specifically, I don't know how to "define the GCC and LD (?) of the target machine, and define the compiler flags CFLAGS(?), modify your need (?)", etc. I already have gcc, cpp and make installed on the Ubuntu and openSUSE parts of my machine. I did try ndiswrapper in openSUSE but it doesn't work for the Windows version of the latest Ralink driver (error: invalid driver rt2860.inf).
I put together a step-by-step guide of how I installed openSUSE 11.1 on my ASUS Eee PC Seashell 1005HA Netbook. I planned on going back and re-installing using my own guide to check for mistakes, etc. but I never seem to get around to it, so I'll just post what I have and let you guys comment if you run into issues. Side notes: This guide assumes you want to wipe out Windows XP and run only openSUSE. Sorry, I'm a Gates hater.
I still haven't figured out how to configure the function keys support for volume controls and wireless. I'm hoping the "eeepc kernel module" mentioned by malcolmlewis here: Suse on my Asus 1005HA - openSUSE Forums will do the trick.
What include support a driver for USB modem Huawei E219 (HSDPA/UMTS) and Huawei EC226 (3G/EVDO)?
View 1 Replies View RelatedBought this USB wireless NIC but didn't realize v3 was on the market and only for about the past month or so..Cannot use NDISWRAPPER for intended specific purpose.A Google search reveals at least one unrequited SOL user in the Ubuntu forums..I can't even find out what chipset is in this thing, doesn't seem to be published anywhere (is there a utility that interrogates USB NICs?)So, looking for suggestions before I give up on this device, BTW here is the typical reports, people might notice that the VendorID/ProdID doesn't return much info on the Internet.Is there a way to force try the driver for v2 of this NIC? I'm not familiar with a procedure that doesn't require some level of device recognition.
View 6 Replies View Related