Found about this website in vector linux site,you can check before you buy if the wireless adapter works with linux or not, so I think is a good tool to check wireless adapters by manufacturer, interface or chipset, it even have links to the drivers websites,
[URL]
I'm using asus usb n-11 wireless adapter.Default kernel module drivers/staging/rt2870sta.ko hasn't id of my adapter. Please add this two strings to next kernel release
--- drivers/staging/rt2870/rt2870.h 2010-05-18 13:09:13.262882659 +0400
+++ drivers/staging/rt2870/rt2870.h 2010-05-18 12:10:20.000000000 +0400
@@ -85,6 +85,8 @@
[code]....
I have installed open suse 11.4, gnome but no luck with wireless settings so far. kernel version is iwl3945 here is stuff that i did but it says "scan is deprecated"
linux-1f6k:/home/rajbanul # dmesg | grep firmware
[ 7.249018] tg3 0000:18:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
[code].....
desktop has been running Ubuntu 10.10 just fine since December. Today, the connections menu shows nothing but "Wireless Networks: disconnected." My laptop is inches away and has a full connection.I'm not sure what diagnostic tools I have at my disposal. The one thing I've been able to do is lspci. The relevant output of sudo lspci -v | less is:
03:05.0 Network controller: RaLink RT2561/RT61 802.11g PCI
Subsystem: RaLink EW-7108PCg
Flags: bus master, slow devsel, latency 64, IRQ 20
[code]...
ive got a Ubuntu v9 and i wanna get my internet to work on it, ive looked all over the place but i cant find a driver for:
linksys wireless-G USB network adaptor
model number:WUSB54G version: 4
finding a tcl code for cognitive wireless network scene
View 4 Replies View RelatedI need a simple traffic monitor for Linux, that counts the traffic in a specific wireless network because I have volume restrictions on that one.I tried it using the following iptables rule:
[code]...
iptables -m mac -A INPUT -p all --mac-source <mac-address> ! -s 10.0.0.0/8
where <mac-address> is the router's one. 10.0.0.0/8 is the local subnet. What I actually want is something like --routed-through <mac-address>. Also, is there some way to gather iptables's statistics? Or is there maybe another tool that does what I want (reliable)?
I installled Ubuntu 10.4.1 on a brand new computer with a Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller on a Foxconn G41MXE motherboard. and I have been unable to connect to wireless network. I have gone through the wireless trouble shooting guide to no avail. When i "check for device recognition" i get the following (note the is no CLAIMED UNCLAIMED ENABLED OR DISABLED)
udo lshw -C network
*-network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
[code]...
I am using an HP G60 laptop with a built in wireless NIC but am unable to get the wireless connection working. I have followed the advice in the sticky messages above and have included the information below. I know the wireless modem is working as I have got a spare USB wireless dongle running on the desktop (ironically - I can only get it working where it is not needed!!!). The same dongle will not work on the laptop. So it is a config thing and not a hardware issue On a trivial level, left clicking on the Network Manager icon shows the "enable wireless" greyed out. Desktop and laptop are running SuSE 11.3 and KDE4.4.4. I have tried the traditional method as well as knetwork manager and have no success with either. Here are the technical details. Hardware compatibility list provides
[code]...
Ever since switching to openSUSE 11.1, I have been having problems with certain websites (using the version of Firefox that came with openSUSE 11.1). Some website's CSS code won't load until repeated reloads - for example, wachovia.com. I'll visit the website and it will be all distorted because the stylesheets did not load, and I will have to refresh a number of times before it becomes usable. Other website's images won't load until multiple refreshes, like facebook.
Is this an openSUSE issue? An openSUSE interaction with Firefox issue? I've never had this problem on XP or Ubuntu.
When i click the button to connect to a wireless network this message apears:Network management disabled
View 1 Replies View RelatedI have just installed opensuse and the codecs to replace windows on my laptop. This is my third day using open suse and some of the websites i try to open (amazon.co.uk, gmail.com and others) redirect to a chinese website called www.net.cn) This is the same with the firefox and opera browsers.
View 6 Replies View RelatedI have a firewall/router box running openSUSE 11.2 between the outside world and the LAN. This router also provides DNS for the LAN and has SuSEfirewall enabled. LAN users need (almost) full access to the internet. However, I want to block certain sites which are not required for work (you name it: facebook is my candidate). What is the most elegant way to block certain sites (which have quite a lot of different IP numbers) ?
View 2 Replies View RelatedI'm completely new to this whole hosting on linux thing. I'm using apache2 and have everything setup as if I was doing it on a windows machine but when I navigate to the site via URL it displays the source code as plan text and thats all I see. I'm running openSuse 10.3.
View 9 Replies View RelatedI was saddled with the job of maintaining my department's website (I work at a college). When I still used windows I would access my department's folder on the web server using the following procedure: (in windows XP) go to the start menu > click 'run' > enter the folder address, I would be prompted for my login and password. The folder, and the whole server in fact, would then be visible in the windows file browser, under the 'networks' icon. I could then navigate to my department's folder and modify the files I need to to update the website.
How do I do this in Opensuse (using Gnome). I tried going to 'network' in nautilus and then 'open location' but no luck. I also tried 'connect to server' in nautilus (in the 'file' menu), but again no luck. which I could stomach if my college provided reliable access to computers on campus, but they don't so I have to use my laptop, which is now windows free . My current job is only going to last for a few more months, so having only so recently got rid of windows I am reluctant to re-install it just for this purpose (which is just about the only reason I currently have for using windows - the other is being able to download audiobooks from the public library, but that's another matter).
I need a textbrowser with Javascript Support. I have compiled the elinks stable 0.11x and the unstable 0.12x version mit JavaScript Support (js moz dev). Both browsers can be started and showed websites normaly. But no javascript, even simple tests like [URL] failed. I started elink with ./elink and typed then the url.
View 4 Replies View RelatedI have a website that has a massive list of royalty free stock photos and I want to download all of them. I have bought a membership for [URL] so I am able to download as much as I want from them for the next month.
Instead of going page by page and manually downloading each set of stock photos manually, I would like to automate this process. Here's my idea:
1. Download the website with the links to hotfile [URL]
2. Use grep to retrieve all the links to [URL]
3. Feed the links I recieve from grep into wget and download the works of them.
The problem I'm getting is when I use grep, It retrieves the entire line of html code where "hotfile.com" is shown. So here is an example of one link I receive in the output:
Quote:
./1776-santa-claus-vector-set.html:<div align="center"><a href="http://hotfile.com/dl/18418176/181a55b/Santa_Claus_Vector_Set.rar.html" target="_blank">HotFile</a></div>
Is there a way to just have the link shown in the output?
PS: I have everything else working, I just need an automated process of getting all the links.
I am running opensuse with LAMP, and this is my first time setting up this type of server (usually am a windows junkie) My problem i am having is that I am unable to view my website from outside the local network. I have setup my router for a dynamic dns and forwarded all the ports through the router and the local firewall. I ran the apache setup through YAST2 and everything seems fine locally but when i attempt to access it elsewhere its not connecting. computechsolutions.dyndns.biz is the dynamic dns address i have setup through my router.
View 2 Replies View RelatedI have a site that I login to to check updates. It does not have RSS because users need to authenticate themselves before getting access to the page. Is there a way to write a script that can login to the page and check whether the HTML has changed and then send me an email?
View 13 Replies View RelatedAt Dell we have worked hard to build out the Dell Consumer Support Home Page to be a thorough support website providing all levels of self-support service, as well as providing easy access to all of the relevant information needed to obtain assisted support. The design of the page has grown organically over time, but we feel it's time to give the look/feel of the page a facelift.
View 1 Replies View RelatedI want to download a website which needs login before accessing the rest of it. how I can download it?, I used webhttrack and it didn't help.
View 1 Replies View Relatedwhen will support the driver of ar9271 for linux?
View 2 Replies View RelatedI'm planning to upgrade to 11.4. Is Ralink 3090 wifi adapter is supported in it or not??
View 6 Replies View RelatedI know WEP is frowned upon and enverone should be using WPA. And my hostapd AP is working with WPA clients. However, I would like to alow some older clients that can only "talk" WEP to connect. All my attempts so far have failed! Can anyone point me in the right direction? The hostapd.conf file comments suggests that hostapd can support WEP. There are no contraindications or flags that I can find in the defconfig file that suggest that a WEP module needs to be complied-in to the final make.
View 6 Replies View RelatedWhen I try to ping with the terminal to check a website's availability, it always just keeps going on and on and on... How do I get it to stop after a set amount of pings? Is there some type of command?
View 6 Replies View RelatedI have only just got my first netbook and when I first installed 11.2 on it it would detect local networks and ask if I wanted to use any of them. Since they belonged to other people and I use a wired connection at home, I declined. I then took my netbook on travels and tried to connect to freely available networks there, but to my surprise it no longer detected them. I tried to go through YAsT and see what needs to be changed but no matter what I tried the wireless option was never offered again.
I have now come back and decided to get to the bottom of this. Here is what I get from iwlist scan:lo Interface doesn't support scanning eth0 Interface doesn't support scanning.It is as if there has never been a wireless capability. Can anyone advise on what to do to fix this?
We have reason to ask this of you following some strange firewall behaviour - But don't panic If you use openSUSE 11.2 and you think: Your Firewall should be running You are not sure but think it should be check and report back here.
This is how to check:
Go to Yast > Security and Users > Firewall
Is l7-filter support available in opensuse 11.3? When running a shaper script I get the following:
Code:
iptables v1.4.8: Couldn't load match `layer7':/usr/lib/xtables/libipt_layer7.so:
cannot open shared object file: No such file or directory
I have the xtables addons installed. Any ideas where I can obtain the missing library?
I have a new install of an OpenSuse 11.3 server and I do not see the IPSec Support option when I use Yast to set that I up. I have the firewall setup with 2 interfaces, one external and one internal and that is all working fine. When I connect via my laptop and connect in via a Cisco IPSec VPN, I get connected, but no traffic goes through.
I did search through the forums, but I don't see any hits related to the issue I'm facing. I installed the ipsec-tools, but I am still not seeing the IPSec Support in the firewall section of Yast that I see noted on many Google Searches. Is there a package or something configuration that is needed to get IPSec Support for VPN setup?
I have been searching for the multicore scheduler support for ARM, in linux kernel.
CONFIG_SCHED_MC, CONFIG_SMP are there for x86..what about ARM ? will the same configs do the job...