OpenSUSE Hardware :: Radeon Driver Opengl Support ( Lack Of )?
Sep 20, 2010
I'm an owner of a ATI mobility radeon X1300 card. Since ATI tagged my card as legacy, i'm stuck with the open source radeon drivers. Wich doesn't bother me, as i know they are slower and openGL support doesn't equal fglrx. What does bother me is that the current version 7.9 dev. claims to have full opengl support up to 2.1. I'm trying to use a extention that is part of the openGL version 1.3 and it's failing. This is a known issue for a long time now and it really disappoints me. "Compressed textures" is what i'm talking about.
Is there any way to make sure that drivers aren't tagged with something they support if they obviously don't? I guess the KDE4 kwin vs drivers thing is the same as i'm trying to say now. Drivers should be documented with what they effectively support and not what they should support. What can I do to make this public to xorg developers? I could only think about posting this here as i have no idea where to put it elsewere. Could someone please point me in the right direction to where i should send this complaint?
View 2 Replies
ADVERTISEMENT
Jun 4, 2011
I have the HD4850 and, I wanted to know if it is possible to use the CLI to see which version of OpenGL is the latest version I can use according to my driver. If it's not possible via the CLI then, what's the next best way? (I can't find a website for the radeon driver listing the latest OpenGL support per supported card).
View 6 Replies
View Related
Apr 26, 2010
This is just to report that I've got 3D support successfully enabled on my Mobility Radeon HD3200 chip with the open source driver on openSUSE 11.2. I did this to replace the proprietary fglrx driver that has already been installed for quite some time on my system.
Uninstalled fglrx, and here we go... Basically what I did was to get the latest X.Org server (1.8) and Mesa from Index of /repositories/X11:/XOrg/openSUSE_11.2 I changed all the corresponding system packages to the versions in that repository. I noticed that I cannot get any 3D support when pairing the last X server with the updated openSUSE 11.2 kernel (2.6.31.12_0.2). With RadeonHD driver it gives me no acceleration at all (No DRI), perhaps it is still intentionally disabled to prevent lockups in r600 cards. With Radeon KDE wouldn't start.
So to get usable driver support I have to update the stock kernel to the one in Index of /repositories/Kernel:/HEAD/openSUSE_11.2 I installed the 2.6.34-rc5-22 kernel and reboot. Immediately I notice that KMS is working, but I could not get DRI to work, presumably caused by the drm being unable to locate two related firmware files (it is there in the kernel, just doesn't know why it is not being loaded). Other than that I do not know why I can't get any acceleration with KMS on. To workaround I passed the 'nomodeset' parameter to the kernel to run in UMS mode instead, and voila! with UMS 2D + 3D accelerations are working. I can enable kwin effects just fine.
Since this is a laptop I need suspend & resume and power management working. Good news is s2ram works perfectly with extra parameter. And all the new Radeon power management options: DynamicPM, ClockGating and ForceLowPowerMode can be enabled just fine! (For UMS you need to generate a xorg.conf and put those options in)Performance is good. So far it's faster than fglrx in some areas and slower in some other area. Now this is truly amazing!
View 9 Replies
View Related
Jul 22, 2010
I'm a new Mandriva user,and have no clue about Linux system,but to be honest I don't want to use Windows product anymore. So I got the Mandriva 1 Spring Gnome,and installed it on my DELL Optiplex Desktop,works fine and very fast,therefore I decided to do the same with my Studio XPS 1640,but after I got a dark screen,so I used an external display(My TV) then realized that it doesn't support the video card on it ( ATI Radeon HD4670 ),and I don't know what to do.
View 1 Replies
View Related
Jun 24, 2011
It's a long long story how I got to this point but I'll save that for later. Ubuntu says subAir does not work due to lack of SSL support. That's only one reason why it doesn't work. I've gotten past that and a few more issues. Here is what I've done: Used stunnel to get around the SSL issue.stunnel -c -f -d 127.0.0.1:8080 -r streaming.one.ubuntu.com:443
subAir still will not work and return a 403 because it wants to do a GET /I got around that two ways. One was a reverse squid proxy and another was an Apache proxy. Ok, now we're cooking. Except now subAir is sending POST data to the subsonic server and ubuntu's version does not seem to like that. Try it yourself
curl -d "c=myapp" https://streaming.one.ubuntu.com/rest/getIndexes.view -v
curl https://streaming.one.ubuntu.com/res...s.view?c=myapp -v
sigh.... so here I am thinking about writing a POST to GET 'thing' or maybe we can get some more info on how ubuntu's subsonic api works.
View 2 Replies
View Related
Dec 18, 2009
I have an ATI Radeon 9600 video card on openSUSE 11.2 and I wish to enable 3D acceleration to get all the eye-candy working. As I understand it, fglrx will not work because ATI has relegated support of this video card to the legacy driver, which does not support the latest version of X. This leaves me to use the open source radeon driver. 3D acceleration works here, but when I move windows around I get lines on my screen suggesting something wrong with the refresh rate. Are there any modifications I can make to my xorg.conf file so that I can get acceptable performance with this video card, or am I relegated to using NVidia video cards?
View 3 Replies
View Related
Apr 1, 2014
I'm using Debian Jessie. All the firmware packages are properly installed, and so are the radeon free driver packages.
However, Gallium falls back to llvmpipe, which from what I understand is a software rasterizer and not actually hardware rendering.
Everything works fine except some specific things like KDE's cube animation, which says it can't be enabled because it requires OpenGL.
How do I get Debian to run Gallium properly?
I attached some relevant info...
glxinfo | grep -i opengl
View 14 Replies
View Related
Aug 4, 2010
I've installed openSUSE 11.3, and I want to have hardware 3D acceleration on my Radeon 5850. Far as I can tell, I don't have any right now (for example, I installed armagetron and it uses software rendering).
I'm a technical enough user, but I'm new to openSUSE and to Linux, and my previous attempt of installing ATI drivers (proprietary ones on Fedora) resulted in the OS being unable to boot. I figure that asking for directions would help make things work out better this time.
View 7 Replies
View Related
Nov 11, 2010
I got 11.3 64-bit installed properly the first time around and working with a Radeon HD4350. I noticed X to be somewhat sluggish on certain apps under KDE so a couple of days ago I tried to install the Catalyst 10.10 tool from the unofficial repository. I didn't like it and uninstalled it.
After some research it turned out that the proper driver is radeon so I uninstalled the radeonhd driver and rebooted hoping Xorg will pick up the radeon driver automatically as it is included with my kernel. Didn't work and I couldn't even get past the failsafe login screen. Regular boot doesn't even get to the login screen. Just hangs and won't respond to any keyboard commands.
I followed the instruction at this SDB Configuring graphics cards in openSUSE 11.3 using the ATI Xorg -configure option from level 3 console and creating a radeon xorg.conf file. It all works to the point of "startx" as regular user which just brings me back to console. Rebooting and does the same things as before under failsafe and regular. Even nomodeset doesn't help. The output error from startx in failsafe console mode is the following:
Code:
Could not open library ksmserver: Cannot load library /usr/lib64/libkdeinit4_ksmserver.so (libatiuki.so.1: cannot open shared object file: no such file or directory) reinstalling is not an option as I have a lot of custom stuff on this box.
View 9 Replies
View Related
Nov 12, 2009
Ati 11.2 repo isn't accessable. Ati catalyst 9.3 dont want to install.
View 9 Replies
View Related
Mar 31, 2010
I just replaced my older monitor with a slightly newer, much nicer Dell 1905FP. I need to have it rotated, but I have no clue how to rotate it. I have seen several xorg.conf modifications that are supposed to work for some of the nvidia drivers, but nothing for the generic radeon driver. The radio buttons in SaX2 are grayed out as well. How do I set up X11 to rotate my display? Preferably without installing the other ATi driver, as I have tried before to switch to that one, and have been unsucessfull.
View 5 Replies
View Related
Jul 27, 2010
recently I have downloaded opensuse 11.3.tried to install latest version of graphic driver.but after uncompressing it says:
which: no XFree86 in (/home/muhammad/bin:/usr/local/bin:/usr/bin:/sbin:/usr/sbin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/usr/lib/jvm/jre/bin)
Error: ./default_policy.sh does not support version
default:v2:i686:lib::none:2.6.34-12-desktop:; make sure that the version is being
correctly set by --iscurrentdistro
Removing temporary directory: fglrx-install.fvzKbN
I have installed kernel sources,xorg x11 headers and gcc.
View 9 Replies
View Related
May 9, 2010
Is the radeon open source driver 6.13 supporting Xorg 6.5 and Mesa 7.8.1?
View 9 Replies
View Related
Dec 24, 2009
When I first installed openSUSE 11.2, it has no xorg.conf of course, but it detected the subject card and loaded radeon instead of radeonhd. When I used Sax2 to create an xorg.conf for a problem, I noticed that it for the device it created:
[Code]....
When I rebooted with this xorg.conf, lsmod says that it's still radeon that is loaded:
[Code]...
I know that radeonhd does cause some issues with KDE desktop effects, but according to Radeon - openSUSE, the cards above X1900 should be using radeonhd. Instead of either of these, should I try to use the ATI driver fglrx? It seems from my gleaning of forum posts that these have some problems, but I am having some desktop effect issues that maybe would be addressed with that driver.
View 4 Replies
View Related
Feb 20, 2010
I didn't found working driver for my card yet. Using OpenSUSE 11.2 KDE, Motherboard MSI 648F Neo, Pentium4 2.8GHz, 2 x 1GB DDR.I've found, that my card should be supported according to HCL/ATI Video Cards - openSUSEInstallation following ATI drivers - openSUSE Easy Way didn't work because of chcecksum difference (x11-video-fglrxG02), Repositary Way too. Hard Way Installation resulted to disability of Graphic Environment and I wasn't able to fix that (finally, I somehow get running KDE, but Kwin always broke down, so system was unuseful).
I also tried packages found by Software search (Software.openSUSE.org), so package 'xorg-x11-driver-video-radeonhd' but nothing works for me, some of them provide result of "glxingo | grep direct" -> "No", some of them "Yes", but in this case I wasn't able to run "glxgears", because of error "drmRadeonCmdBuffer: -22. Kernel failed to parse or rejected command stream. See dmesg for more info." Desktop Effects I cannot run anyway. how to get graphic acceleration working. It will be great if is here someone with exactly same, or similar card, he could write a step-by-step guide to do that. Starting with fresh installation of OpenSUSE (not corrupted by my previous tries) is not problem.
View 9 Replies
View Related
Mar 13, 2010
I tried to install the driver using the easy and hard way, but unfortunately I couldn't install it. When the file manager opens up through terminal after I type in the command using super user mode, I select the downloaded file and it opens it up in kwrite.
View 9 Replies
View Related
Aug 23, 2010
I have a problem with free ATI driver with Radeon X850XT 256Mb VRAM. I cant get 3d acceleration in OpenSUSE 11.3.
System : Linux lv426 2.6.34-12-desktop #1 SMP PREEMPT 2010-06-29 02:39:08 +0200 x86_64 x86_64 x86_64 GNU/Linux
Here boot.msg :
<6>[ 5.847172] [drm] Loading R400 Microcode
<6>[ 5.854547] [drm] radeon: ring at 0x00000000B0000000
<3>[ 6.032976] [drm:r100_ring_test] *ERROR* radeon: ring test failed (sracth(0x15E4)=0xCAFEDEAD)
<3>[ 6.035637] [drm:r100_cp_init] *ERROR* radeon: cp isn't working (-22).
[code]...
View 4 Replies
View Related
Feb 13, 2011
After finally figuring out how exactly how to compile something from source, I did it with Wine. However, there's a problem, when I'm trying to play a game on Steam (Half-Life) on a TNT2 graphics card (With NVIDIA drivers 71.86 installed as well as all of the packages needed to compile Wine from source), everything either lags or has an error.
One of these errors is that OpenGL32 isn't being initialized after attempting to start the game in that mode. Another error (or I should say problem) is that in Direct3D mode, it just.. crashes lol. Also, in Software mode, it LAGS horribly and I don't think it has to do with the hardware limitations I have on this machine. I did however install the glx and gl drivers AFTER I compiled Wine, do I have to do yet another install?
Debian Lenny 5.0.8
667MHz Celeron Coppermine
NVIDIA TNT2 32mb VRAM card
View 3 Replies
View Related
Mar 13, 2010
I recently bought a HIS HD 4670 IceQ card but can't get it to work in openSUSE 11.2 Under Windows the card works fine, so I assume there is no hardware problem. I tried this card in two computers with different mainboards, but it does not work. Several times I reinstalled openSUSE completely from scratch (tried both 32bit and 64bit versions) but no luck. The problem: Right after the installation it uses the radeonhd driver. This basically works, but without 3D (no Tuxracer...) and even 2D is slow (dragging around windows on the desktop is slow, page scrolling in firefox also).
Then I tried to install the ati proprietary driver, both from rpm (the rpm's from the "official" ati repository have a checksum error, as already mentioned in another thread!), and by downloading the driver from AMD and running the install script. The install script seems to work successfully. The kernel module is compiled and loaded. "aticonfig --initial" makes a rudimentary xorg.conf. But then, when starting X, it does not work:
- on one of the 2 tested systems, even kdm does not start, the screen simply stays black with a frozen cursor top left, even CTRL+ALT+backspace doesn't do anything - on the other system, kdm starts and shows the login screen, but when trying to start KDE kwin crashes, and the windows have no title bar (when I googled for this symptome I found lots of people also having this problem...) - trying to configure the system using sax2 didn't help, even sax2 doesn't display properly I have now spent 4 days trying to get this to work and now I'm really tired of those buggy graphics drivers, be it proprietary or open source...
Can anyone recommend me a graphics card that is approximately as powerful as the radeon 4670 (I bought this card because it is said to be the most economical card (both in price and energy consumption) that allows to play Anno 1404 reasonably well on windows), but is known to work in openSUSE 11.2, even in 3D mode (tuxracer...)?
View 4 Replies
View Related
Apr 8, 2011
I upgraded a HP Proliant server to openSUSE 11.4 (X86-64) with KDE, and I'm encountering various graphical problems. This machine's been running SUSE versions since 11.0 on similar hardware with few major issues, and I did the 'upgrade' by a new install keeping only /home partition intact. This Server has 10GB memory. It has a PCI ATI ES1000 with 64MB and uses the radeon driver. It boots up fine under the monitor's correct resolution of 1600*1000, but
1) It flickers one time each 4 of 5 seconds
2) during works more and more memory is used : starting at 9% and going up to 51% after 20 minutes and I receive then allocation error in /var/log/messages
[Code]...
View 9 Replies
View Related
Nov 12, 2010
My friend just recently gave me an Nvidea Geforce 4 64mb, and it is supposed to be better than my ATI x700 Pro. I was wondering if there was openGL support for this card, and how do i replace it with my ATI card?
View 1 Replies
View Related
Mar 9, 2011
My understanding is that there is no Optimus support for Linux at this time.Will a default CentOS installation work fine with just the integrated graphics.in other words, will Optimus and the discrete graphics be ignored? Will OpenGL still work correctly with the Intel integrated graphics?I am considering an i5-based laptop with Optimus support, where I might go with a dual-boot configuration.
View 1 Replies
View Related
Feb 6, 2011
I'm not to sure this is the place I should post this, but couldn't find any place for it to fit. So here is the deal..I am running 10.10 with the standard LAMP setup. I am running a drupal 7 site no problems. What I need to do is run a multi site sub directory. (domain.com/newsite). So far the best I can do is get a directory index of the second site (domain.com/newsite), but cant run the installer. (I did the symbolic link to the doc root of the drupal install.)If I type in the url domain.com/newsite/install.php I get not found. I placed an index.html test page and it renders fine. I think I'm close but just not there yet.
Any ideas from anyone? I can get Sobdomains to work fine on a test mache, but sadly I need the domain/site to work due to lack of DNS support at the moment. I tried to get some info from the drupal forum, but everything always points to subdomin setups. I also posted over there, but it seems like the forums have very little support and are a bit on the slow side.
[Code]...
View 9 Replies
View Related
Jun 29, 2011
After a bit of work I got 3d acceleration (direct rendering) working on my system. Now, whenever I use intensive graphics, (certain screen savers, Google Earth overlay animations) all performs fine for a while (1-2 minutes) and then causes a full system freeze. Only solution at that point is a hard power reboot. I don't know where to look for a solution, since I can not check any diagnostic files when the system is frozen.
System:
Intel Pentium 4 CPU 3.00GHz
ATI FireGL V3100 graphics Card
OpenSuse 11.4 with radeon driver.
View 9 Replies
View Related
Mar 15, 2010
Am trying to install the correct driver for my RV710 Radeon HD4350 grahics card.which version out of these two I should install: * x11-video-fglrxG02 (for HD2000 series and later) * x11-video-fglrxG01 (for Radeon 9500 - X1900)
View 3 Replies
View Related
Feb 21, 2009
I have downloaded latest Nvidia drivers but am not having much luck getting .run to install properly. How do I go about this?
View 2 Replies
View Related
Apr 1, 2010
The platform I used is Intel Q45 chipset. But my customer insist on openSUSE version 10.2. The problem I met is that I cannot get any graphic driver for Q45 chipset upon openSUSE 10.2 developing.
View 4 Replies
View Related
Feb 9, 2011
The AMD tool ATI Catalyst does not provide Linux support for the ATI HD 6850. Running the tool allows the monitor to display in 1080P. However, it results in a watermark stating the hardware isn't supported.
Is there an open source driver that will support this card?
Can the Windows driver be co-opted for Linux?
When will there be an open source driver to support video cards?
View 7 Replies
View Related
Mar 18, 2010
when will support the driver of ar9271 for linux?
View 2 Replies
View Related
Sep 4, 2011
After installing OpenSuse 11.3x86_64 specifically for the ATI radeon HD 4850 proprietary driver that was created with intended compatibility from ATI, I have intense screen tearing.
View 4 Replies
View Related
