I installed SuSE 11.2 on my laptop (its wireless and connects to the internet) and am have trouble getting my wireless HP Deskjet j4680 to be found. I tried the printer options as root, but it does not give you an opertunity to select a wireless device to connect too. Does anyone know where I can download software for this. I tried HP, no luck.
View 3 RepliesI have an intel 5300 wireless chipset which is not supported in kernel 2.6.25. I am currently using opensuse 11.0, I downgraded from 11.1 since I faced so many other problems. can I setup my wireless driver under kernel 2.6.25? if so, how could i do this?
View 7 Replies View Relatedi have the cd just do not know how to install the driver for my linksys wireless pci card 14e4:4329the device is BCM43XG
View 4 Replies View RelatedAccording to a help page (Wireless Network Card Installation - openSUSE) I need to use ndiswrapper to install the windows driver for my wireless. However it appears the command 'ndiswrapper' was not installed with the operating system. How can I obtain the package for ndiswrapper and install it? Not being connected to the wifi makes this step tricky
View 1 Replies View RelatedI got openSUSE installed, and now am trying to build my wireless driver, using the instructions here: [URL].
The wireless driver is here:
Broadcom.com - 802.11 Linux STA driver
NOTES:
- The (parenthesis: ) are my notes to show you what I was doing.
- Lines with "#" before them are what I typed into Terminal.
- Lines below (Output: ) are what was output by Terminal.
Code:
(run in su:)
lspci -n | grep 14e4
(output:)
04:00.0 0280: 14e4:4727 (rev 01)
(BUILD DRIVER:)
#su
<password>
# mkdir hybrid_wl
# cd hybrid_wl
# tar xzf <path>/hybrid-portsrc_x86-32_v5.100.82.38.tar.gz
# make
(output:)
if 'make' is not a typo you can use command-not-found to lookup the package that contains it, cnf make
(NOTE: with "cnf" it is saying "Cannot Find")
(install "make" command:)
# zypper in -t pattern devel_basis
(It installs 93 packages)
# make
(output:)
kbuild_nopedantic=1 make -C /lib/modules/`uname -r` /build M=`pwd`
make: *** /lib/modules/2.6.34-12-desktop/build: No such file or directory. Stop.
make: *** [all] Error 2
(Tried:)
# zypper in kernel-source
(It installed 3 more packages)
# make
(output:)
kbuild_nopedantic=1 make -C /lib/modules/`uname -r` /build M=`pwd`
make: *** /lib/modules/2.6.34-12-desktop/build: No such file or directory. Stop.
make: *** [all] Error 2
The problem might be derived from the fact I had to install openSUSE in Kernel (F6) > Safe Mode. If I need to install more things, please let me know ASAP! I am wired to my ethernet until then, which means I can't move from this spot until my wireless is working!
I recently upgraded to OpenSUSE 11.4 GNOME on my ancient Compaq Armada E500 (Pentium II processor w/512MB of RAM) and now I'm trying to install my wireless driver with ndiswrapper. I've done this a couple of times before, but I'm having trouble getting ndiswrapper to find my driver. The driver is located in a folder on my desktop, but when I type the command 'ndiswrapper -i home/edwin/Desktop/WPC54G_40826/LSTINDS.INF' I get a message that there is no such file or directory at ndiswrapper's location, which is usr/sbin/ndiswrapper. So how do I get ndiswrapper either to look in the directory where the file is located or get a copy of LSTINDS.INF into the usr/sbin/ directory, which must be accessed as root?
View 9 Replies View RelatedI can't get the wireless to work on my laptop its a hp Pavilion dv9700 it has a Broadcom 4321AG 802.11a/b/ g/draft-n Wi-Fi Adapter i cant seem to get it set up.
View 6 Replies View RelatedWhen I installed openSuse 11.4 it doesn't see my wireless card Broadcom. How can I install Broadcom wireless driver ?
View 9 Replies View RelatedI am currently running openSUSE 11.4 on my Toshiba A505 laptop. I'm not certain about the exact model number of the wireless adapter but I believe it's made by Realtek. It does not show up in my list of network connections in YaST so I assume I'll need a driver for it.
View 7 Replies View RelatedMy laptop has a built-in miniPCI wireless card that has Atheros AR-5001 chipset and use ath5k driver for wireless G. How do I switch to Broadcom wl driver for Linksys WPC-300n wireless N PCMCIA card?
View 9 Replies View RelatedNo wireless networking. The ethernet works fine, and the wireless interface itself works well in Windows 7 (dual boot). Tried: Ndiswrapper, notoriously quirky, does not seem to work with the XP driver (the oldest driver available for the RTL8191SE). The linux driver offered on the manufacturer's website lacks any installation instructions. I have no clue how to install a linux driver. SUSE seems to have two network managers that are constantly complaining about control: Network Manager and Yast. Neither are great and I am left missing my Ubuntu.
However, my audio only seems to work on SUSE. I have tried almost every distro on this machine. Ubuntu lacked sound and wireless, Fedora played startup sounds, but would not play an mp3 or wav file (fiddling with the mixer did not help). And Fedora also lacked wireless support. PCLinuxOS, my favorite, lacked sound and wireless. Tried some oldies too. ELE, DSL, Puppy, Ubuntu Netbook remix, Vector, Browserpuppy, Crunchbang, Cruncheee (just for experimental sakes) and probably others I am not remembering. So far, installing a free linux distro has cost me 14 dvd-R's and countless hours of installing, reformatting and reinstalling. Part of me really wanted crunchbang to work, as I love the minimalism and blacked-out theme.
I need wireless network access. The wireless light remains red in Linux and pressing the key does nothing to start the device. In Windows 7 it always lights white and works perfectly. Why hasn't SUSE adopted a gui for ndiswrapper? Other distros have it. Why is my brand new laptop, which is by no means abnormal in make or configuration, not 100% supported natively by any Linux distro? I just updated to the new kernel yesterday. So I should be running the most modern operating system available. Yet good-ol Windows 7 is my only fully functional environment.
Installed here with Yast epson stylus sx wireless printer and printing via cable works fine just can not print via wifi. I am aware that CUPS should be running and I see them in Yast->services running however I can not add from
Yast --> Firewall --> Allowed Services --> Services to Allow --> Cups because there is no Cups in dropdown list. Also have these
Code:
Connection http://localhost:631/9100 set
but when I log in /localhost:631/9100/printers.
Code:
Paused - "Destination printer does not exist!"
printer works as I have tried print from windows. Could the missing cups in firewall be an issue or something else? But I turned off firewall with
rcSuSEfirewall2 stop
status shows firewall is off and still cant print.
My first problem is that when I open KNetworkManager the wireless tab is desibled,I don't know why! My laptop is HP pavilion dv6-1245DX. How to get connected to my wireless router?
View 9 Replies View RelatedI'd like to know how can I find a Linux wirelles driver for wireless Belkin card.
View 1 Replies View RelatedI have WiFi printer, HP DeskJet F4500. If suse firewall is on, yast doesn't see that printer. If I turn firewall off, Yast sees printer and install it just fine. Problem is, that when i start firawall again, yast denies whole printer and turn it off mode in Yast. What firewall rule i have to make to get this work?
View 2 Replies View RelatedBought a Canon all-in-one (printer, copier, scanner) today, which prints beautifully on XP & connects to our WiFi without problem. Only downside, is it can't find a driver for Linux. Anyone out there using this printer under Linux, or any pointers to the right driver?
View 3 Replies View RelatedBought this USB wireless NIC but didn't realize v3 was on the market and only for about the past month or so..Cannot use NDISWRAPPER for intended specific purpose.A Google search reveals at least one unrequited SOL user in the Ubuntu forums..I can't even find out what chipset is in this thing, doesn't seem to be published anywhere (is there a utility that interrogates USB NICs?)So, looking for suggestions before I give up on this device, BTW here is the typical reports, people might notice that the VendorID/ProdID doesn't return much info on the Internet.Is there a way to force try the driver for v2 of this NIC? I'm not familiar with a procedure that doesn't require some level of device recognition.
View 6 Replies View Relatedrecently switched from Ubuntu. But I'm finding it difficult to get my wireless card working. It's a Dell Wireless 1395 Wlan Mini card, but works with a broadcom driver(Ethernet card is a broadcom).
View 2 Replies View Relatedwhen will support the driver of ar9271 for linux?
View 2 Replies View RelatedI had a problem with using ndiswrapper to install Windows driver on Netgear WN511TA wireless adapter card. Problem solved by replacing Netgear WN511TA with Airlink101 AWLC6080 PCMCIA wireless adapter to work in my triple-boot XP Pro/Ubuntu Karmic/openSUSE 11.2 Toshiba laptop and using the latest Linux driver version 2.3.0.0 dated January 29, 2010 from Ralinktech site. I followed driver instruction in a Ubuntuforums tutorial (Howto: Ralink RT2860(m) PCI(e) RT2860...on Intrepid).
I am wondering if I can use the same Linux driver (RT2860sta) for openSUSE 11.2 on my triple-boot XP Pro/Karmic/openSUSE laptop, ie. copying over instead of building and compiling driver from source again, because I don't quite understand the build instruction given in the README file of Ralink's Linux driver file. Specifically, I don't know how to "define the GCC and LD (?) of the target machine, and define the compiler flags CFLAGS(?), modify your need (?)", etc. I already have gcc, cpp and make installed on the Ubuntu and openSUSE parts of my machine. I did try ndiswrapper in openSUSE but it doesn't work for the Windows version of the latest Ralink driver (error: invalid driver rt2860.inf).
I downloaded the Dlink wireless G dwa-110 usb driver but I'm getting "rt73.ko failed to build. make[module]error 1" when compiling it.
I have installed the kernel-source and kernel-syms but I still get the same error. What am I doing wrong?
I'm running openSuSE 11.2 64 bit.
Im making plans to buy a 15" Dell Inspiron notebook as it's currently the cheapest 15" notebook which is available in my country, and from what I have read, the Dell WiFi card used in the notebook is Broadcom based, and that Broadcom had recently released hybrid drivers for their cards. Now, after browsing through OpenSUSE's HCL [URL] it seems that a patch to the drivers is needed.how do you patch the driver? Do you just go to <extracted driver directory>/src/wl/sys/wl_iw.c and just throw in this whole chunk of text anyway into the file, or is there something more to it?
Code:
@@ -580,6 +580,7 @@
range->enc_capa |= IW_ENC_CAPA_CIPHER_TKIP;
range->enc_capa |= IW_ENC_CAPA_CIPHER_CCMP;
range->enc_capa |= IW_ENC_CAPA_WPA2;
[code]....
From my lspci output I get Broadcom 4313 and 0x14e4:0x4727It appears that Broadcom supports this card with their Linux STA driverBroadcom.com - 802.11 Linux STA driver guess on that page mine is 4313 2.4 Ghz 0x14e40x4727 Dell 1501even though my notebook is Toshiba.Then they say that the driver is included with Fedora and Ubuntu but nothing about OpenSuse. Then they go on about compiling the driver myself. I'm pretty sure the modules required for compiling drivers are not available on a fresh install and without Internet connection.Is there an easier way to get the driver? Could someone knowledgeable make some .rpm that I can download on another machine and put on a USB stick? Or do I have to wait until Suse developers get to it?
Or could someone make wl.ko file they are talking about on Broadcome Readme? It looks fairly easy to install the driver, if I knew exactly what to disable/blacklist and what security module to load.Another thing I got from dmesg, not sure if it's of any help, was that for this card pci entry that goes like 07:00.0 there's "support D1 D2", then "#PME supported from D0 D3hot D3cold" then the next line "#PME disabled". I've searched this forum but the only time 4313 was mentioned when someone made a mistake with the model number
I have finally gotten permission from Realtek to submit the new driver to the staging directory of the mainline kernel. This also means that I can allow users to download from the git source repository so that they can build their own versions. If you are interested in doing this, you will need to install some packages. To get the ones you need
[Code]....
I have a Rosewill RNX-N150pc wireless card that's been working great with Suse 11.2. But with 11.3, it's able to scan for my wireless network, and I see RX/TX packets moving, but DHCP isn't able to get an address. I've tried the 2010_0115_RT3562_RT3062_Linux_STA_V2.3.0.0 and 010_07_16_RT3062_Linux_STA_v2.4.0.0 drivers from the Rosewill site, and the rt3562sta-kmp-desktop-2.4.0.0_k2.6.34.0_12-1.1.i586.rpm package from Suse, all with the same result. I've even tried forcing an IP address on the interface with 'ifconfig', so my current guess is that the WPA-PSK security isn't working.
[Code]...
I have tired everything I know how to do and I can not install the driver for the rtl8191se. I read the instructions that say to run:
sudo make
I have been through this before with Fedora. Ubuntu supported my wireless card but not my display so I am switching to this OS. Does anyone know how to install the driver on 11.4 suse?
joecamel@linux-1b2w:~/Downloads/rtl_92ce_92se_92de_linux_mac80211_0003.0620.2011> sudo makemake -C /lib/modules/2.6.37.1-1.2-desktop/build M=/home/joecamel/Downloads/rtl_92ce_92se_92de_linux_mac80211_0003.0620.2011 modules
make: *** /lib/modules/2.6.37.1-1.2-desktop/build: No such file or directory. Stop.
make: *** [all] Error 2
joecamel@linux-1b2w:~/Downloads/rtl_92ce_92se_92de_linux_mac80211_0003.0620.2011>
I'm very new to openSUSE, so I need easy, clear instructions on how to install the driver for RaLink RT2561T wi-fi card. I have the driver and everything, I just don't have a clue on how to install it!
View 5 Replies View RelatedI can not install a driver for device EDUP WU2070. I have a disk with a driver for linux general. I don't know how to compile a makefile. My OS 11.3v doesn't see a device.
But when I run in Live CD mode all drivers install automatically and my WI-FI device work properly.
I have just installed openSuse 11.4 and have been trying to get my Edimax EW-7711In wireless card to work. I have downloaded and installed NDISWRAPPER but when I type ndiswrapper -i /path/to/rt2860.inf I get a message saying that this is the incorrect driver. However this driver drives the card for both Fedora 14 and Ubuntu 10.10, both using ndiswrapper, so what may be the problem with openSuse 11.4?
View 8 Replies View RelatedBroadcom wifi driver working only with Kernel-default, any way to get it work with desktop-kernel 3.1rc/3.0?
View 6 Replies View Related