NetworkManager? I have OpenSUSE 11.3 and broadcom wifi module. By default network are managed by NetworkManager. Wifi works great on opened access points. But when i tried to connect to WEP access point my hexadecimal key rejected. When i used ifup instead of NetworkManager the same key has been accepted. But i won't use ifup.
View 9 RepliesAfter spending quite some time on this, I have narrowed it down to:
Adapter works OK with NetworkManager
Adapter works OK with ifup if I run iwconfig after ifup has finished
It eppears to be linked to another thread Probl me de r seau wifi / Network manager in that dhcp needs to be running. (So it may be a 'feature' of RTL819 adaptors) So I've finally worked out that I need to start dhcp first.
[Code]...
I have just installed 11.4 KDE (having used 11.3 for a while). I was able to use YAST in 11.3 to switch from network manager, to using 'traditional', to connect to wireless network without problems. Since installing (fresh install) 11.4, only network manager seems to work without issue;
using traditional never sets up the wireless connection - or should i say appears not to as no apps will connect (as they do fine using the network manager connection). using 'ifstatus wlan0', seems to suggest there is no configuration file when using the 'traditional' gui. Has any one had similar problems
I just installed OpenSuSE 11.3 on an old IBM T20 I had kicking around and I'm using a Proxim Wireless PCMCIA Card (Atheros AR5001X). Since this laptop does not have a DVD drive I installed the system using the Netboot CD and have the SuSE 11.3 ISO on an NFS/SAMBA file server. The issues appeared after the first reboot, the adapter no longer worked. I resorted to using the wired interface to finish the install.
Once the system was up followed the trouble shooting steps outlined in various places and found the ESSID is not being picked up by the ifup scripts. Not sure if it matters but I have ESSID broadcasts turned off on all my WAPs.
The ESSID is in ifcfg-wlan0. To get wireless working I have to manually issue iwconfig wlan0 essid "xxxx"..
Both networkmanager and ifup fail..
I am running my wifi using YAST and IFUP. The card is a zd1211, and works just fine. However lately I have have to "start" it manually after booting. The only way I have found to do this is to open YAST >network settings> and "edit" the card, but NOT change anything, just click through the next buttons and it connects. I have tried using the settings "on boot" and "on hotpug" but always when I reboot, I have to go through the YAST rigmarole. This is a PITA. I am trying to avoid NM as I want to sort this out, not cover it up with more software.
View 4 Replies View RelatedI have the above mentioned USB Wifi Dongle Bus 002 Device 003: ID 148f:3072 Ralink Technology, Corp. RT3072 Wireless Adapter It works extremely well using the KDE network manager but just will not connect using ifup traditional method through yast.
Initially it was using the RT2870 driver but this only gave wirelessg speeds (and still no ifup) but after blacklisting RT2780 and using RT5370sta driver draftn speed was achieved using KDE network manager however I still could not connect through ifup. The dongle scans and sees networks using ifup but will just not connect properly (NB security WPA2-AES).
I have recently helped a friend of mine install ubuntu on their macbook which they have had since 2007 and we have run into a problem connecting to her wireless network. The WPA2 password that she uses is "invalid" while logged in under her ubuntu partition. We are able to connect to unprotected wifi networks without a problem and her home network can be accessed via OSX and my linux install on an acer aspire one (I'm running Peppermint OS at the moment). This has been a problem since day one of her ubuntu installation.
View 2 Replies View RelatedWhen I firsts installed Ubuntu 10.04, and tried to hook it up to my wireless network it noticed my connection and accepted my password, but did not connect. My wireless card doesn't have linux drivers installed. I found the correct drivers, but I am unsure of the correct way to install them in Windows so they work in Ubuntu. I am currently dual booting Windows 7 and Ubuntu.
View 9 Replies View RelatedI have installed suse 11.3 on a USB drive and can boot from it successfully. The install was done using my desktop computer. I then booted my netbook using the usb drive, linux loads and runs fine, however when i need to enter the password to make any changes it will not accept it. I can not even access the hard disk in the netbook. I rebooted using the desktop just to check that the password I was using was correct and it worked fine.
USB drive is a 250GB western digital with only linux on it
Desktop is running Windows XP service pack 3, 4GB RAM
Netbook is running Windows 7 Starter 2GB RAM.
is there any difference between ifup and ifplug?or they just do the thing.
View 4 Replies View RelatedIn Network Settings in OpenSuse 11.1 while using "Traditional Method with ifup" I am able to set up a box as a server and connect via http over the net BUT Firefox cannot browse. If I switch to "User Controlled with NetworkManager" I can run Firefox but my server is not contactable. How do I do both?
View 4 Replies View RelatedI had to uninstall a proprietary ATI driver because it wrecked my X server. Apparently I removed the wrong package, because now the X server won't even start, even with the "nomodeset" flag.
QUESTION 1.How can I configure WiFi on the command line with NetworkManager or ifup, whichever is easier?
QUESTION 2.Which packages do I need to download to restore the X server?
I have searched around a bit for a knetwork manager issue I am having on my opensuse 11.2 32 bit install. My wireless card is an 04:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) I am currently using the Broadcom wl driver
I am on the Internet with this machine as I am typing using the older "ifup" method. I am having great difficulty connecting to the Internet when I use knetwork manger though. The strange part is when I am connected to my router with knetwork manager, I can log into my Router, but I can not get to any web-page/ping any outside address.
so far the best (I was able to locate) advice I was able to get is located in this post. < Broadcom wireless, partchy internet - openSUSE Forums > following a posted how to to disable IPV6 (I suspect this may be the issue??), I was unable to locate modprobe.conf, or modprobe.conf.local, even after I updated via updatdb. I gave a shot at entering in "disable_ipv6=1" into "menu.lst". However, this did not solve my issue with knetwork manager. If my network information is needed when I am "connected" utilizing knetwork manager
I've had 11.4/KDE working pretty well on dual boot Asus G73SW for a few weeks now. Only issues were the FN-* functions that control keyboard lights and whatnot but no biggie since the essential worked.The last couple of days the update notification was indicating 1,201 updates to be made. Yeah it seemed extreme but I googled around and checked the forums and there was nothing related. I figured I might be missing some packages since I installed from the live KDE CD (still 1202 updates!!!???). So I updated. Big mistake!!!!! Ever since NetworkManager cannot connect to the internet, be it wired or wireless.
Initially it could not even see my home network but it picked it up after I removed the plasmoid from the panel and reinstalled it. However it doesn't respond when I click the network icon and still no connection.I managed to get eth0 working with ifup but not wifi. The last part of network manager log file is quoted below. I can send the whole thing to whoever is interested. I can't make sense of it but maybe someone on the forums can.
Code:
Jul 13 11:09:08 linux-yy10 NetworkManager[1649]: <info> NetworkManager (version 0.8.9997) is starting...
[code]....
How do you mannually set up a network using Yast/ifup? I'm trying to get my wireless running on a Broadcom 1390 WLAN. I've gone through the stickies in the wireless forum (this is my first stab at Linux) and have gotten the drivers installed and the internet working (albeit intermittently) using Knetwork manager. It seems that some folks that have had the same issue did not have problems setting the network up manually with Yast & ifup. I've disabled network manager in Yast, and I went through man ifup. It seems I need a "pre-configured interface," but I don't know how to make that happen.
View 9 Replies View RelatedI love to submit all bugs as I know the importance that this can play for further development. When I click on Bugzilla it allows me to write information etc and I even sign in with my forum id (I know it is not necessarily correct) but I didn't know what else to do and thought it would work. When I sign in it does not reject me until the very final step of the bu reporting process.My question to anyone is how can I get my bug reports to be accepted or how can I sign in to this area of Fedora if required?
View 2 Replies View RelatedBackupPC usually just works. It backs up the localhost and another PC, both running Debian Unstable. However it stopped backing up the remote machine after the 22nd March.This correlates with updating OpenSSH.All I get is "Unable to read 4 bytes from Server".As suggested on the backupPC website I ranCode:sudo -u backuppc /usr/share/backuppc/bin/BackupPC_dump -v -f backupclientI was asked for the sudo password and then for a password for each directory that was to be backed up.The backuppc password was not accepted. The root password was.Could somebody point me towards a solution? Do I have to recreate the SSH keys?
View 2 Replies View RelatedSo I thought I was getting the hang of networking stuff, but, apparently not. Anyhoo, I have a startup script (very basic one liner)ifup -a Reading the man page for ifup it says this should bring up all devices listed in interfaces file (so contained in there I have):After starting my machine I run ifconfig which returns no output.If I do ifup eth0 I get: ifup: interface eth0 already configured.So finally, if I run dhcpcd this brings up my nic. If I then do ifdown -a and kill the dhcpcd process and then manually type ifup -a, it all magically comes back.Would someone explain what step I am missing in the process to have all my cards startup as part of the boot process?
View 11 Replies View RelatedJust completed setting up dual monitors on my computer, it's a dual boot Debian with Squeeze on disk one and Sid on disk two. My problem is that everything is working properly on Squeeze, but any changes I make to system settings in Sid setting up my second monitor are not being accepted. I'm at a point where I have redone everything twice and with no effect, can some one point me to some effective documentation or something I can use to correct this condition.
View 3 Replies View RelatedTrying to install a game and its asking for root password which i type in and it keeps coming back saying that its wrong but if i try and input the same password in when using package manager it works fine ?? and caps is off
View 4 Replies View RelatedFor example if I run command in terminal: sudo startupmanager, my psw is accepted and startup manager is started correctly.
But if I click "System- Administration- Start Manager" GNOME asks "Enter the administrator password" and same psw as in terminal is not accepted.
My account is assign to admin group, checked via System- Administration- Users and Groups
I did a routine update on 11.04, and after it was complete my root password appears to have changed.I have NOT forgotten it, and I'm absolutely sure that I'm typing it in correctly. More frustratingly, I know that I had to use it in order to do the update, but right after it was completed, I tried to make a small change and it was telling me that it's incorrect
View 4 Replies View RelatedI'm trying to setup my debian system so that I can access it's services from the internet
I have my router set to forward ports 21, 22, and 80 to the internal ip of the server, and internet port checking tools tell me the ports are open at my external ip.
On the debian I am running Apache, ProFTPD, and SSH Server, and they all work fine for me inside the network, but whenever I try connecting with my external ip, all connections are immediately refused.
So I don't know if its a problem with my router setup, with my debian system setup, or the setups of the servers.
Installed ubuntu with dual boot Vista and installed wireless driver in ubuntu , so far so good, all accesible wireless networks comes up in the wireless list but when i want to connect to my own network it wil not accept the password and doesn't connect...
View 6 Replies View RelatedI am new to CentOS, and am having a problem with authentication.The system accepts the login if the first 8 characters of the password are correct, regardless of the length of the password.My root password is 15 characters, but entering the first 8 my login is approved, which is a bit of a security concern.I think this may be something I am missing in the PAM configuration.I've experienced the behavior on SSH as well as Webmin.
View 1 Replies View RelatedYes thats right. Last night I changed my logon password for better security. (have a feeling my flatmate knows it). When I tried to log in today, it wouldn't accept my password. No I know that I got it correct. I know this for a fact. So after a few tries, I decided stuff this, I am going to reset it using recovery console. But the recovery console just hangs with the following on the screen:
[4.1098198] Console: switching to colour frame buffer device 100x30
I can ctrl+alt f2, and I just get a flashing cursor. So that's it then. My ubuntu box is hosed and I am about twenty minutes away from formatting and starting again. 6 months of schoolwork, designs for architectural competitions etc all gone.
I having a problem with my network. I'm trying to assign an IP alias of eth0:1 to eth0. If I use ifup eth0:1 is fails and corrupts the network. Making the network useless. But if I just enter 'ifconfig eth0:1 10.1.1.51', it work fine? My scripts look like these:
Code:
:network-scripts; cat ifcfg-eth0
NAME="System eth0"
DEVICE=eth0
ONBOOT=yes
[Code].....
I'm having a weird problem, eth0 does not start neither on bootup nor ifup...not even issuing /etc/init.d/networking restart...i will show you some info just to check
[Code]...
I installed Jessie with Cinnamon alongside Win 7 - all went quite well though I did have to do a bit of guessing along the way.
Following online tutorials etc, I tried to install sudo from the terminal. It did not go well - some stuff appeared that was not shown in the instructions from many sites. So I abandoned it, or so I thought.
Then I discovered that my root password was no longer recognised. So I reset it, following online instructions.
This was successful apparently, as I can log in as root and see this in the terminal.
But on trying to start Synaptic ( and later others), I found that the new root password would is not authenticated, but my user password does authenticate successfully. This seems to be the wrong way round!
Quote:
Code:
I've used these commands to generate my new keys and immediately got my sshd server running.
However, I now have the problem where the password is not being recognized and is repeatedly asked for.