Installed ubuntu with dual boot Vista and installed wireless driver in ubuntu , so far so good, all accesible wireless networks comes up in the wireless list but when i want to connect to my own network it wil not accept the password and doesn't connect...
View 6 Replies
When I firsts installed Ubuntu 10.04, and tried to hook it up to my wireless network it noticed my connection and accepted my password, but did not connect. My wireless card doesn't have linux drivers installed. I found the correct drivers, but I am unsure of the correct way to install them in Windows so they work in Ubuntu. I am currently dual booting Windows 7 and Ubuntu.
View 9 Replies View RelatedTrying to install a game and its asking for root password which i type in and it keeps coming back saying that its wrong but if i try and input the same password in when using package manager it works fine ?? and caps is off
View 4 Replies View RelatedI have recently helped a friend of mine install ubuntu on their macbook which they have had since 2007 and we have run into a problem connecting to her wireless network. The WPA2 password that she uses is "invalid" while logged in under her ubuntu partition. We are able to connect to unprotected wifi networks without a problem and her home network can be accessed via OSX and my linux install on an acer aspire one (I'm running Peppermint OS at the moment). This has been a problem since day one of her ubuntu installation.
View 2 Replies View RelatedI did a routine update on 11.04, and after it was complete my root password appears to have changed.I have NOT forgotten it, and I'm absolutely sure that I'm typing it in correctly. More frustratingly, I know that I had to use it in order to do the update, but right after it was completed, I tried to make a small change and it was telling me that it's incorrect
View 4 Replies View RelatedBackupPC usually just works. It backs up the localhost and another PC, both running Debian Unstable. However it stopped backing up the remote machine after the 22nd March.This correlates with updating OpenSSH.All I get is "Unable to read 4 bytes from Server".As suggested on the backupPC website I ranCode:sudo -u backuppc /usr/share/backuppc/bin/BackupPC_dump -v -f backupclientI was asked for the sudo password and then for a password for each directory that was to be backed up.The backuppc password was not accepted. The root password was.Could somebody point me towards a solution? Do I have to recreate the SSH keys?
View 2 Replies View RelatedYes thats right. Last night I changed my logon password for better security. (have a feeling my flatmate knows it). When I tried to log in today, it wouldn't accept my password. No I know that I got it correct. I know this for a fact. So after a few tries, I decided stuff this, I am going to reset it using recovery console. But the recovery console just hangs with the following on the screen:
[4.1098198] Console: switching to colour frame buffer device 100x30
I can ctrl+alt f2, and I just get a flashing cursor. So that's it then. My ubuntu box is hosed and I am about twenty minutes away from formatting and starting again. 6 months of schoolwork, designs for architectural competitions etc all gone.
I am new to CentOS, and am having a problem with authentication.The system accepts the login if the first 8 characters of the password are correct, regardless of the length of the password.My root password is 15 characters, but entering the first 8 my login is approved, which is a bit of a security concern.I think this may be something I am missing in the PAM configuration.I've experienced the behavior on SSH as well as Webmin.
View 1 Replies View RelatedI have installed suse 11.3 on a USB drive and can boot from it successfully. The install was done using my desktop computer. I then booted my netbook using the usb drive, linux loads and runs fine, however when i need to enter the password to make any changes it will not accept it. I can not even access the hard disk in the netbook. I rebooted using the desktop just to check that the password I was using was correct and it worked fine.
USB drive is a 250GB western digital with only linux on it
Desktop is running Windows XP service pack 3, 4GB RAM
Netbook is running Windows 7 Starter 2GB RAM.
Quote:
Code:
I've used these commands to generate my new keys and immediately got my sshd server running.
However, I now have the problem where the password is not being recognized and is repeatedly asked for.
I've tried Ubuntu, Arch, and most recently Fedora but the SUSE GNOME environment blows everything else away!
The only problem (so far) is that Network Manager requires you to enter your password every time you login to unlock the password keyring. I want to disable this.
I think some distros disable the prompt by using the login password to unlock the keyring, but I use auto-login (if that makes a difference).
I would like to know whether ldap can be used to authenticate wireless clients with my server.server and clients are connected to a wireless router and i am able to get wireless adapter work in my ubuntu. Is there any anything extra which is required or the openldap server will work for wireless clients?
View 1 Replies View RelatedI just installed Ubuntu 10.10 on my thinkpad t30 and I can't get my usb wireless adapter to work. My adapter is a wusb54gc v3 from linksy's. My kernel is a 2.6.35-22-generic.
View 1 Replies View RelatedHow to remove keyring that is asked when the computer wants to connect to the wireless?
View 1 Replies View RelatedI have ndiswrapper installed, and have successfully installed the drivers, I have also used nm-applet (and x forwarding) to configure wireless connections. My problem is that I want to reboot and unplug my wired connection and use just my wireless connection, but when I reboot it doesn't seem to connect to my network.
is there a command line tool or an independent tool that i can launch forwarding x I can use to search for and connect to wifi networks that would also have the ability to save configuration so that when I reboot the system automatically connects to my wifi?
I have setup a nis server and client. At first I didn't have a local user defined on the client. The client then used the user and passwords from NIS, so that was ok.
The problem then is, that when the server is down, I couldn't login to my client anymore. So I created a local user with the same name on the client but with a different password (after I shut the nis server down, if nis server was on, I couldn't create a local user with the same name). I then edited etc/nssswitch.conf as follows:
Code:
# (like no NIS server responding) then the search continues with the
# next entry.
#
# Legal entries are:
#
# compat Use compatibility setup
[Code].....
If NIS server is on: client has to login with the nis password If NIS server is down: client has to login with the local password (as fallback)
However the actual behaviour is that I can only login with the local password now. The NIS pasword doesn't seem to be used anymore.
For example if I run command in terminal: sudo startupmanager, my psw is accepted and startup manager is started correctly.
But if I click "System- Administration- Start Manager" GNOME asks "Enter the administrator password" and same psw as in terminal is not accepted.
My account is assign to admin group, checked via System- Administration- Users and Groups
I love to submit all bugs as I know the importance that this can play for further development. When I click on Bugzilla it allows me to write information etc and I even sign in with my forum id (I know it is not necessarily correct) but I didn't know what else to do and thought it would work. When I sign in it does not reject me until the very final step of the bu reporting process.My question to anyone is how can I get my bug reports to be accepted or how can I sign in to this area of Fedora if required?
View 2 Replies View RelatedNetworkManager? I have OpenSUSE 11.3 and broadcom wifi module. By default network are managed by NetworkManager. Wifi works great on opened access points. But when i tried to connect to WEP access point my hexadecimal key rejected. When i used ifup instead of NetworkManager the same key has been accepted. But i won't use ifup.
View 9 Replies View RelatedJust completed setting up dual monitors on my computer, it's a dual boot Debian with Squeeze on disk one and Sid on disk two. My problem is that everything is working properly on Squeeze, but any changes I make to system settings in Sid setting up my second monitor are not being accepted. I'm at a point where I have redone everything twice and with no effect, can some one point me to some effective documentation or something I can use to correct this condition.
View 3 Replies View RelatedI'm trying to setup my debian system so that I can access it's services from the internet
I have my router set to forward ports 21, 22, and 80 to the internal ip of the server, and internet port checking tools tell me the ports are open at my external ip.
On the debian I am running Apache, ProFTPD, and SSH Server, and they all work fine for me inside the network, but whenever I try connecting with my external ip, all connections are immediately refused.
So I don't know if its a problem with my router setup, with my debian system setup, or the setups of the servers.
I'm new to networks and servers, been using Linux on the desktop for a while now but always relied on the company's IT guy for setting up everyting LAN-based.
Now I want to build up my home LAN, and want to do it with Linux. I've managed to set up LAMP and file share servers.
What I am looking for is information on what I need, and how to set up a server for the following tasks:Centralized Username and Password, that when the user logs into any one of the desktops in the LAN, it uses this for authentication
Something that allows this authentication to be utilized in other servers (file access, web access, router logging, etc.). Something to make it easier for continuing permissions from one service to another. e.g. I have IPCop filtering content, and it has provisions for tracking who is making which request if there is authentication going on. (optionally) to run a script for mounting Samba shares or mapped network drives so from one system to the next. For example, in whatever box somebody logs in, it mounts a server share ("smb://Myserver/users/<username>") to a local folder ("my_user_share").
So;user "fred" ="smb://Myserver/users/fred" and user "wilma" = "smb://Myserver/users/wilma" but both would find their respective one mounted under "~/my_user_share". This would be irrespective of which box they are loggin in with. If the server share location changes (new server/servername), I change it on the server so the next time they log in it points to the right place.
I guess it is similar to Window's Active Directory, though I'm not sure what it's called, how to configure it and what it is and is not capable of doing.
Our corporate wireless network uses continuously changing passwords with RSA tokens.So every time we need to connect to the wireless we need to enter a new password off the RSA token. For extra fun using the wrong password a couple of times in a row causes the users account to be locked.Network manager automatically stores and reuses the password, with the net result that it is constant getting my account locked.Is there some way to prevent it from storing my password for that network?
View 1 Replies View RelatedI installed Jessie with Cinnamon alongside Win 7 - all went quite well though I did have to do a bit of guessing along the way.
Following online tutorials etc, I tried to install sudo from the terminal. It did not go well - some stuff appeared that was not shown in the instructions from many sites. So I abandoned it, or so I thought.
Then I discovered that my root password was no longer recognised. So I reset it, following online instructions.
This was successful apparently, as I can log in as root and see this in the terminal.
But on trying to start Synaptic ( and later others), I found that the new root password would is not authenticated, but my user password does authenticate successfully. This seems to be the wrong way round!
After forgetting my general password/password lost by Ubuntu (uses @...) I use the Psychocats lost password guide: [url]
This allowed me to reset my password but now after login the Network Manager applet pops up and demands a password.
This password is the original password that has now been changed. Putting this original password works.
I've now changed my password back to the original one to avoid the Network Manager prompt but I can't find where to change the Network Manager password or tell it to use my general password.
If I change my general password Network Manager asks for the old one.
Booted up my laptop with wireless disabled (using the little switch on the laptop). I flipped the switch, network manager showed all the wireless networks, but didn't connect to any. So I picked mine, and it asked for the WPA key. Now normally (if I had booted with wireless enabled) it would connect without asking for the WPA key. So I rebooted again with wireless enabled this time, and same deal. It seems that it's just forgotten the key altogether.
I put in the key and it's all back to normal, but I'd like to know where/how network manager is storing the WPA key, and why it forgot it.
Iam trying to get samba work with no password on my home network. I want to have Writeble permissions for creating files and folders and sub folders in the shared folder with no password needed.
I have this set up
Code:
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
[Code].....
I can access the /home/seb/ directory but cant write in it. And with the same permissions for the down directory I cant even access the folder from the other pc it only says "Could not display "smb://laptop/down".The file is of an unknown type"
And finally how can I clean up the smb.conf so it is readable?
I'm using 9.10 most recent updates. I want to connect to a wireless network and get a dialog box offering "WPA & WPA2 personal" as the only choice. The passphrase I was given is 6 letters but the "Connect" button does not light up until I get to 8 when entering wpa/wpa2.
Do I need to convert the passphrase somehow?
Atheros 9k and Linksys "Wirelss G router with SRX200".
I recently bought hp mini netbook.
I used my friend's (who lives upstairs) internet on my desktop with the router
so I have the 26 digits WEB KEY.
I entered the the web key but the computer is keep saying "The network password needs to be 40bits or 104bits depending on your network configuration.
This can be entered as 5-13 ascii characters or 10 or 26 hexadecimal characters."
This is confusing because I Thought 26 hex is 168 bits or something like that.
So is there way to change 26 hex to 10?
My netbook has Broadcom 802.11 b/g WLAN
I'm setting up a shared laptop. When I connect the laptop to a wifi network, network-manger remember the password without asking the user if it should.Our wifi network is WPA2 enterprise protected, so we all have our unique personal username/password.I didn't find how to configure network-manager to not remember wifi passwords.
View 3 Replies View Related
