OpenSUSE Install :: USB Installation - Password Not Accepted On Different Computer?
Mar 5, 2011
I have installed suse 11.3 on a USB drive and can boot from it successfully. The install was done using my desktop computer. I then booted my netbook using the usb drive, linux loads and runs fine, however when i need to enter the password to make any changes it will not accept it. I can not even access the hard disk in the netbook. I rebooted using the desktop just to check that the password I was using was correct and it worked fine.
USB drive is a 250GB western digital with only linux on it
Desktop is running Windows XP service pack 3, 4GB RAM
Netbook is running Windows 7 Starter 2GB RAM.
Trying to install a game and its asking for root password which i type in and it keeps coming back saying that its wrong but if i try and input the same password in when using package manager it works fine ?? and caps is off
When I firsts installed Ubuntu 10.04, and tried to hook it up to my wireless network it noticed my connection and accepted my password, but did not connect. My wireless card doesn't have linux drivers installed. I found the correct drivers, but I am unsure of the correct way to install them in Windows so they work in Ubuntu. I am currently dual booting Windows 7 and Ubuntu.
BackupPC usually just works. It backs up the localhost and another PC, both running Debian Unstable. However it stopped backing up the remote machine after the 22nd March.This correlates with updating OpenSSH.All I get is "Unable to read 4 bytes from Server".As suggested on the backupPC website I ranCode:sudo -u backuppc /usr/share/backuppc/bin/BackupPC_dump -v -f backupclientI was asked for the sudo password and then for a password for each directory that was to be backed up.The backuppc password was not accepted. The root password was.Could somebody point me towards a solution? Do I have to recreate the SSH keys?
I don't know that this post fits here, nor does it fit in "Applications." installing suse doesn't seem to give you the chance to name your computer. Now my computer is called "linux-0qvi" or something strange like that. I want to name my computer. Can I do this now without screwing things up??
Also, during install, there didn't seem to be an opportunity to make a separate root password. My first (and main user) account is now set up with admin rights, so I have to type in my account password every time I do something as root. Can I set a separate dedicated root password without screwing up my system?
I have recently helped a friend of mine install ubuntu on their macbook which they have had since 2007 and we have run into a problem connecting to her wireless network. The WPA2 password that she uses is "invalid" while logged in under her ubuntu partition. We are able to connect to unprotected wifi networks without a problem and her home network can be accessed via OSX and my linux install on an acer aspire one (I'm running Peppermint OS at the moment). This has been a problem since day one of her ubuntu installation.
I did a routine update on 11.04, and after it was complete my root password appears to have changed.I have NOT forgotten it, and I'm absolutely sure that I'm typing it in correctly. More frustratingly, I know that I had to use it in order to do the update, but right after it was completed, I tried to make a small change and it was telling me that it's incorrect
Installed ubuntu with dual boot Vista and installed wireless driver in ubuntu , so far so good, all accesible wireless networks comes up in the wireless list but when i want to connect to my own network it wil not accept the password and doesn't connect...
I am new to CentOS, and am having a problem with authentication.The system accepts the login if the first 8 characters of the password are correct, regardless of the length of the password.My root password is 15 characters, but entering the first 8 my login is approved, which is a bit of a security concern.I think this may be something I am missing in the PAM configuration.I've experienced the behavior on SSH as well as Webmin.
My wifes computor crashed during an update with a message to fill in a report. It would not respond to any key presses. The computor has been running 11.3 since it was realeased without problems other than jerky video. The computor will not boot it asks for the password but does not accept it, Although I can see the Home folder it does not mount. I have tried testdisk but although it sees the partions it cannot acess them.
Yes thats right. Last night I changed my logon password for better security. (have a feeling my flatmate knows it). When I tried to log in today, it wouldn't accept my password. No I know that I got it correct. I know this for a fact. So after a few tries, I decided stuff this, I am going to reset it using recovery console. But the recovery console just hangs with the following on the screen:
[4.1098198] Console: switching to colour frame buffer device 100x30
I can ctrl+alt f2, and I just get a flashing cursor. So that's it then. My ubuntu box is hosed and I am about twenty minutes away from formatting and starting again. 6 months of schoolwork, designs for architectural competitions etc all gone.
hello i am trying to change my password, but when i type in the new password i get this:"The password is longer than 8 characters. On some systems, this can cause problems. You can truncate the password to 8 characters, or leave it as it is."my question is what kind of problem could i get and how can i change so i have to log in every time i start the computer?
I'm totally new to this linux thing and I have a very strange problem. I downloaded the .iso and burned it to CD as per instructions. I had intended to install alongside existing WinXP Pro Sp3. Everything seemed to be going fine until it the installer got to the "User Info" Screen where it asks for my name, the computer's name, password, etc. At that point nothing I did would allow the "forward" button to work. I backed up a step or two and went forward again to no avail. I ended up hitting the hard reset button to get out of it. I never saw any error messages even though I scrolled through the install log at the bottom of the install window. Now my HDD is 60 Gb smaller (The part intended for Ubuntu) under Win XP and I have no idea what to do about it.
My system:
Asus P5NE-SLI Mobo Intel Core2 Duo 8400 3.0 Ghz 2 Gb ram at 800Mhz Nvidia 9800GT GPU 512Mb
Win XP seems to be working normally except for the loss of HDD space.
NetworkManager? I have OpenSUSE 11.3 and broadcom wifi module. By default network are managed by NetworkManager. Wifi works great on opened access points. But when i tried to connect to WEP access point my hexadecimal key rejected. When i used ifup instead of NetworkManager the same key has been accepted. But i won't use ifup.
I want to do an apparently simple task but since I migrated to Opensuse I found no way to do it. I have an enhanced install of Opensuse 11.3, where I added softwares from different sources according to my needs. Now that it's working fine I would like to make the same kind of install for two friends of mine and for a virtual machine on Virtualbox. In Ubuntu I used remastersys and in few minutes it created a live DVD with all the content of my system, and all of this offline, without downloading anything else. In Opensuse the only resources that most resemble that are Kiwi and Suse Studio.
But it seems that in both the softwares must be downloaded from repositories online. That would not work for me because it would take a very long time to find out all the packages I installed, from what repositories and my internet connection is very slow so I could not do it all at once. I tried Clonezilla but I was not able to restore the content of my Opensuse partition to a different machine. It gave me error messages, didn't make the restore and I didn't find a solution anywhere online. How can I transfer the content of my Opensuse installation to another computer without having to use online resources?
I am using OpenSUSE 11.4 on my office desktop computer. I would like to prevent users tinkering my computer, since there are personal and important files. How can I ask a username and password? I have one of course, but it is asked only if I log out and then log in. In the first boot, everyone can reach the KDE desktop.I am pretty sure it is an easy task.
Have followed swerdna's guide as in the past and my wife from her win7 computer can see and has read write access to all the shares & can print to the shared printer attached to the Opensuse computer etc. However, when I try to access her Win7 shares from my opensuse computer I am presented with a username / password prompt. Here is my smb.conf
[code]...
have followed swerdna's guide (as mentioned previously) and set 'password protected sharing' to off on the win7 computer.
I work on a product that have to start automatically an application. Running Opensuse 11.2 So in the inittab I have : 1:2345:once:/root/Velox/VeloxBoot.sh 2:2345:respawn:/sbin/mingetty tty2
In the VeloxBoot.sh, if I don't press any key, my application starts after a timeout. If the user presses a key I want to have a login prompt. Unfortunately, if I start /bin/login, I have a prompt with login, but once I enter my login, it does not ask for a password and it says wrong password
for christmas my parents got both my younger sister and i acer mini computers, model d250-1958. my sister was trying to change her password that lets herself as a particular user log in. somehpw she messed up the password and its not what she thought it was and now she doesn't have any way of accessing anything. i thought that there might be an ovveride system or a reseting trick. i've looked in the manual but cant find anything of the sort for either of the two options.
I'm having a hard time installing Ubuntu 10.10 (32bits). I load the CD and everything's ok throughout the installing procedure, but when the installation is over and it says it's gonna reboot it doesn't do it!
The screen resembles a terminal with a message like "the computer is going to reboot NOW!" but it could stay like that for hours. The keyboard is locked so I can't reboot by commands, and if I press CTRL+ALT+DEL it just reprints the same message. Therefore I'm forced to turn off my computer manually.
After that, the Ubuntu desktop doesn't load. The screen shows a terminal asking for my username and password to access the computer. No graphics at all.
im trying to install ubuntu 10.10 on my notebook but it stop on the section of entering my name, computer name, user name, password... and at the bottom section it says... ready when you are...
My Netbook is ASUS EeePc HA900, I already use Ubuntu 10.04 is ok, nothing problems, then I upgrade to Ubuntu 10.10, it is still Ok. But when I upgrade to ubuntu 11.04, it have problems with Wifi, when I connect Internet via Wifi, just input the Password, it make my computer slow to halt, and have to turn the power off to shutdown the computer.
i have recently put opensuse 11.2 into a computer with XP on it. I held out on GRUB, but now i need it. I was wondering in this will interfere with my XP update.
At the moment I've got dual-bootable machine with WinXP (25GB on hard disk) and openSUSE 11.2 (20GB on hard disk). After saving the important files on my ~/home I want to wipe off all data from both my partitions and then install WinXP (with 15GB) and openSUSE 11.2 with 30GB. The problem is I'm not sure how to go about doing this? I'm guessing the problem will be the boot process. I installed openSUSE on a machine that already had WinXP and I didn't change any boot settings so it must still be controlled by XP. So presumably I'd have to:
1. Remove openSUSE first and then remove XP using the XP CD. 2. Install XP again 3. Install openSUSE on another partition as I did before but with different partition sizes.
Or should I install openSUSE first before XP? I think I'm more confident on installing XP first since I've already done it earlier. The only other complication is that this is my 'laptop' screen is broken so I use an external monitor. This is what prevented me from formatting my computer earlier.
I have netbook and i have been trying to install OpenSUSE from USB the thing is installing from USB with Mint, I could install. I have been using FUSB, liveusb-creator3.9.2, unetbootin and Univeral-USB-Installer-v1.7.2 is there any other way to install OpenSUSE onto my Netbook which does not have CD/DVD-rom?
After installing win7 I've lost the grub menu. I tried live cd and reset it. Bu I couldn' t. When I write find /boot/grub/menu. it's write (hd0,1). how can I reset the grub menu?
have managed to lock myself out of my root account...I just installed openSUSE 11.4, and during the install, I set the root password to be different then my regular user password. Both passwords I've used for a while and know backwards and forwards so it's not a case of simply forgetting a new password.The thing is, I managed to mis-type the root password wrong 2x in a row. I have tried all my passwords numerous times, with and without caps lock, I've tried su -, sudo and logging in directly as root. All to no avail. It always returns authentication failure.I know this is a worst case senario and am expecting that the easiest way to fix is just to reinstall (Not a big issue since I just installed) but I figured I would ask if anyone had a good way to fix this
