xfce mixer identifies my card (atiixp) and i put the volume to the max and make sure there is no mute, but now sound comes out from flash nor mp3's, nor assualt cube. they all worked in ubuntu with gnome. any ideas?
View 3 Repliesstill stalling after all those months, everything is explained here
[URL]
the card works fine in xubuntu jaunty, doesn't in xubuntu karmic or ubuntu karmic. i (my wife) wants to use ubutun karmic, but we still can't get this ATMEL PCMCIA wirelesscard to work on ubuntu karmic like it does on jaunty... and we have the windows INF drivers
my wireless network doesnt recognize that any network is around. The broadcom STA driver will not install and it says "Please have a look at the log file for details: /var/log/jockey.log" the jog file says
2011-07-09 21:21:33,921 WARNING: /sys/module/wl/drivers does not exist, cannot rebind wl driver
2011-07-09 21:21:33,987 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
[Code].....
I'm on 11.04, im on a macbook 6,2 i7. The wifi worked when i booted from cd but now it doesnt work once i installed.
Just noticed that my kids are no longer able to play webkinz on my 64bit system (Edubuntu). Webkinz also doesn't work on my 64bit Xubuntu system. Looks like 64bit Flash is broken? -- or something is broken between Webkinz and the latest flash. Webkinz, predictably enough, works on Windows, but also works on my 32bit Linux system with the latest flash.Just wondering if any of you out there with a 64bit system could try accessing Webkinz (if you can see the Login moniker and click it, then it's working on your system).
View 9 Replies View RelatedI was just using the mic and watched it stop working suddenly. I was in the middle of a skype test call when the graphical mixer level died down to zero in the middle of the call. When the test call was played back, the first part sounded fine then the sound got lower until it became inaudible. Since then I can't get any sound from my mic in skype.
Also, the audio input level graphically shown in Sound Preferences shows no fluctuations in sound as it used to before. The input device is enabled. I tried using Sound Recorder to record some sound clips and that worked fine. So the mic is working but Sound Preferences and Skype seem to have the mic level really low. I'm not sure what else to think considering it was working perfectly a few minutes ago. I've tried restarting, but that didn't fix it either.
I'm using Xubuntu 10.10 and trying desperately to connect to my wireless network. I have tried wicd and network manager when I crashed wicd. First of all I would get a "bad password" message, then I progressed to a "cannot assign IP" now I can connect to the network and see my netbook on my routers GUI but I can't browse. I have an ASUS 901 (bought with Xandros installed as standard). I'm not sure if I am making progress or not because half of the time, I only have a vague idea of what I am doing.
View 1 Replies View RelatedI have a new Dell XPS 9100 with 9GB ram and ATI Radeon HD 5770 1024MB GDDR5. I installed a dual boot with Windows 7 and Ubuntu 64bit. Sound worked fine withthe Windows 7, but no sound with Ubuntu. Did a reinstall with just Ubuntu 64 bit (wiping out the Windows 7). No sound.I first did:
System -> Administration->System Testing
(testing only for sound). I get:
0 [Intel ]: HDA-Intel - HDA Intel
[code]....
In ubuntu 10.04 my X-fi Fatal1ty Titanium sound card worked for my speakers but I had to use onboard sound for the mic. When I installed 10.10 the sound card no longer works at all so I have to run the speakers through the onboard sound.
The second problem I have is that Skype will not pick up my microphone all other programs seem to be able to record from the microphone just fine but skype does not. Ive tried selecting all the different input device options from the skype settings but none of them seem to work.
EDIT: Sound doesn't work at all in wine.
EDIT2: The X-fi card no longer shows up in the sound control panel.
When I installed my 64 bit system of Ubuntu 10.04 the sound worked very well and I were very happy. The problem started however when I installed Skype which uses pulseaudio. As soon as I start skype (or any other application that uses pulse, HoN for example) the applications sound output or input does not work at all. If I have pulseaudio started in some way, applications that I suppose do not use it like spotify or flash player stops to produce sounds. And when I type "pulseaudio" in the terminal it gives me this:
[Code]...
I have this old kUbuntu box here, which used to be 8.04. For some reason after a bunch of upgrades and other unrelated changes sound doesn't work any more.
Sound works on this machine when rebooting to Windows, so it's not hardware problem. It used to work on Linux on this machine before, so it's not weird hardware. (lspci says 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)) This problem persists across resets. alsamixer etc. claims sound is not muted, and volume is high. it's the same no matter which program I try to play some sounds (or which -ao for mplayer, default seems to be pulse) nothing obvious shows up in system settings
Do I really need to reinstall the system to fix that, or is there something simple I'm missing?
I just installed 10.04 but sound doesn't work.
$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
[Code]....
Every time I log in Ubuntu 10.04, everything works fine, but there is this annoying problems with the sound volume and icon: It always appears as muted, and if I try to turn the volume up, or down, it wont make any difference, it stays muted.
Plus, if I try to shut it down, it always redirects me to the log in screen, always. The only way to turn down the laptop is, then, to unplug the wire.
I have Wine installed in ubuntu/Kubuntu Jaunty and I can play games like Roller Coaster Tycoon fine in it (it works great and has sound) but when I try to use my disk for Ear training (which is an .exe file) I can view/use the program perfectly except there is no sound, the disk works in the school computers so I know its not faulty, but the sound just doesn't work in Wine.
I changed the format in Wine to all the different Windows (Vista, XP, 2000, etc.) and the sound didn't work in them either, everything in Alsa mixer is turned up 100% and I've tested it with both my head phones and computer speakers, but theres never any sound.
I bought a Toshiba Nb205 laptop with a Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) inside. After I first got it I installed Ubuntu onto it, and that's where the problems started. After everything was installed I noticed that my sound doesn't work. So I looked everywhere. I tried so many solutions offered on these forums including messing around with Alsamixer and nothing seemed to be working. Then one day I luckily stumbled upon this website that directed me here: [URL] So I went there and picked the Linux 2.6(X86)(DEB) from the drop down list and installed it. I rebooted my machine, and I now had sound.
However, the only problem is that I can't control the volume of the sound. When I play something, it stays at one volume and one volume only. Nothing on sound preferences will work. The only way I can raise or lower the volume is if I do it in the application that I run, like if I am playing a ..... video, I have to use their volume control to control the volume. My master volume won't work at all.
I have a Acer Aspire One netbook running Lucid Lynx.Sound quality is fine through my speakers, but when I plug in headphones things go awry. The headphones are working because the speakers mute and I can hear musical instruments playing on the track, but I can't hear any of the voices in the music.It's as if the voices are muted, but I can still hear the guitars, drums, bass, etc. When I unplug the headphones the track plays normally, voices and all, through the speakers.
View 2 Replies View RelatedI use ubuntu 10.10 and for some reason the sound doesn't work. tried everything reinstalling ALSA and alsa driver doesn't even work any help, it's a toshiba satellite L505-S6946
View 5 Replies View Relatedfirst because of my nvidia card if I don't put nomodeset my screen turns off.also whenever I try to update my nvidia drivers either the ones from the ones from the website or the propriety drivers I get a MCU failure or something like that and to fix that i have to change "nvidia" in my xorg.conf to "nv" but then my resolution loads to 640x480 which i cant change and it says im not using the propriety drivers so then i changed "nv" to "vesa" which makes my screen highest screen resolution 1280x 720 and apparently my refresh rate is 0. but i cant do anything good without the propriety drivers.Also my sound doesn't work at all unless i plug in some headphones.
View 7 Replies View Relatedafter installing trying to install veetle on my ubuntu 10.04 64 bit I always get the message at the start-up:could not update /home/user/.ICEauthority.my sound control does not work anymore (message: 'waiting for sound system to respond')using Krusader I get the message 'Cannot talk to klauncher: The name org.kde. klauncher was not provided by any .service files.I checked the owner of .ICEauthority and the permission and they are OK. Same for my /home. None of the suggestions found in the other threads worked.Veetle has been installed using the install.sh script and there is no unistall option
View 3 Replies View RelatedI have these Creative Inspire M4500 4.1 surround sound speakers.I got them to work succesfully on my older computer by installing the ALSAmixer. and then unmuting the channels. However on my new computer even after installing ALSAmixer, i cannot seem to be able to get playback from my rear two speakers. I tried the community ubuntu documentation and ALSA's own guide(which seemed too complicated for me.)
View 9 Replies View Relatedive just installed dosbox, my favorite dos emulator. in windows, i usually used to play doom and both sound and video worked flawlessly. when i tried running doom in dosbox in ubuntu, the game ran perfectly, but the problem is with the sound. the soundblaster sound effects stutter and are not even working at times. the soundblaster based music doesnt even work! i either blame pulse-audio or the defaut config settings.
View 1 Replies View RelatedI am experiencing problems with the Gnome ALSA Mixer. I installed Ubuntu on my MacBook Pro inside Windows (I am running Windows via bootcamp), and when I am running Ubuntu the sound doesn't work. After researching the problem online, I was told that one needed to download an application called the "Gnome ALSA Mixer", and switch the mute to off (apparently the mute is default). I downloaded the application, but whenever I try to run it the application window is blank. There are no controls of any sort. I was told when installing Ubuntu inside windows that the disk efficiency (I think thats what is was) is very much reduced, but I don't know if this has anything to do with that.
Also, is there a way to prevent the trackpad from registering stimulus while typing? I find it very obnoxious that every time I try to type in my password or the like that the curser clicks off of where I'm typing, so I am constantly having to move the pointer back and re-click in the area I'm trying to type in (if that makes sense).
I have installed Ubuntu on my MSI Mega PC but have no sound, also the display on the front of the computer doens't work. Unsure if there are drivers for this but here goes:
[Code]...
I used to run an application named DBabble (client) through Wine back when I used 11.1. Then, the version of Dbabble client was 2.2h -I still have the exe-. Now I tried this same version on 11.3 with Wine, and this is what I got:
ImageBam - Fast, Free Image Hosting and Photo Sharing
Latest version of the client is 2.9i, and this one seems to work fine, but the server I want to connect needs client 2.2h. I thought it was the Wine version, but a friend tried the exe in a system with 11.1 and latest Wine, and it worked for him.
So there's probably a change in 11.3 that broke this app under Wine. Is there a solution or workaround for this on 11.3?
That's my situation. Didn't work in 8.04, DID work in 9.04 (flawlessly, in fact), and now again does not work in 10.04.
I have the Dell Wireless 1395, Broadcom chipset.
on fc7-10 the sound on my laptop worked, in fc11 it is broken. just did a yum update How to get sound up and going?
[Code]...
I've been using Ubuntu 10.10 for a few months now (after about a 5 year hiatus from all things Linux) and when I first booted up, everything worked perfectly out of the box except audio. I have a Creative Sound Blaster Audigy 4 sound card, and after searching the forums I used [URL] to successfully get my audio working.
Now, I'd like to try Kubuntu. Like Ubuntu, when I use the live CD everything but audio works. However, I can't install gnome-alsamixer like I did to fix the sound under Ubuntu (of course, I may not have had all the repositories enabled, I didn't think of this until later). Also, KMix didn't seem to offer an option that worked.
I have a motherboard Gigabyte H110M-H DDR3 1.0 and a VGA Nvidia NVS 300 (It doesn't have HDMI connector, but after Debian installation, it shows audio HDMI), After installling Debian 8.4 Jessie amd64, I noticed the sound doesn't work, the motherboard audio codec is a Realtek ALC887, I don't have a HDMI Monitor, nor my VGA has HDMI Connector, but is a little bit strange that Debian recognizes HDMI Audio, if a run "# cat /proc/asound/cards" it shows me two audio cards, the HDMI and the ALC887 and if I run "# cat /procs/asound/modules", both cards are using snd_hda_intel. It is installed PulseAudio and Pavucontrol, I have checked if the audio was muted, but the sound volume is set to 100%, I don't know what to do anymore... I have a computer with a realtek codec too, but it's another model ALC665 or something like that, and the system is equipped with an ATI HD 5450 with HDMI Audio, I have checked the what modules the Debian is using, and both uses the snd_hda_intel, but the sound works with HDMI and Realtek Codec.
View 8 Replies View RelatedI got a sound issue with my debian system
here is some outputs
lsmod
Quote...
i just reported a bug to launchpad (#511562. i'm not sure if this bug is in flashplugin-installer or pulseaudio.when i use firefox or chrome for watching a flash video from videos for example, all works good. i then transfer the sound to a remote sink using sound preferences > output > internal audio analog stereo on myuser@otherhost. after this is done, the flash video halts. this is also true if i restart firefox and start a new video, already having transferred the sound. sometimes you can see the video taking huge skips forward. for example, on a 3 minute music video, i see 3-4 different frames from different places in the video. the sound is ok though! 100% reproducible and if i transfer the sound back to local speakers the video resumes and plays perfectly.
View 1 Replies View RelatedI'm not great with computers. I have no clue how to fix this kind of thing. I went into Alsamixer, and it says my card is an Intel 82801CA-ICH3. I have updated all of the files that needed updated, turned up the master volume and it still doesn't work. Somebody please explain this to me in words I can understand.
View 1 Replies View Related