Fedora Networking :: 14 Wireless On Dell X1 Worked, 15 Doesn't?
Jun 19, 2011
I did an inplace upgrade on my Dell Latitude X1 from Fedora 14 to 15 using dist-sync as per instructions on the website. It was not entirely smooth but I believe all the packages are now present and correct. Initially, about half the packages were still on f14 and the machine barely booted. I booted single user (nothing else was possible) and persuaded yum to fetch & install the rest.I was using wicd on 14 to connect wirelessly and it "just worked". I used wicd because I found NetworkManager didn't work.
On upgrade to 15, wicd now fails, and NetworkManager still does.icd i get an authentication failure, though the pw is correct. The only clue in the logs I can see is that wicd complains of not finding python-iwscan, and doesn't seem happy in using dhclient. Of course p-iwscan isn't in Fedora. Is p-iwlib similar? For wlassistant onnect failed.NetworkManager is currently refusing to acknowledge the existence of wireless on the machine, though occasionally it has addmitted the possibility. Then however I can neither scan for an SSID nor enter one manually ** Using iwconfig and setting the key manually *appears* to connect to the AP, but dhclient won't get IP data for it (if I ask nicely, it appears to try but isn't transmitting anything)The wireless card is an Intel ipw2200 chipset built into the X1. The ethernet port is working ok now, using a Broadcom chip.
View 5 Replies
ADVERTISEMENT
May 20, 2010
That's my situation. Didn't work in 8.04, DID work in 9.04 (flawlessly, in fact), and now again does not work in 10.04.
I have the Dell Wireless 1395, Broadcom chipset.
View 2 Replies
View Related
Dec 23, 2009
I am using a dell laptop which has Dell 1397 802.11B/G Wireless Mini Card. I not able to connect to internet and was not able to detect what actual problem is weather card is not supported (i.e. drivers are not available) .
Also, if any one can point to exact process to connect to wireless Lan using fedora12.
View 10 Replies
View Related
Mar 3, 2009
I have been running FC8 on this IBM T23 with a D-Link wireless adapter. Using MadWifi this has worked fine with Network Manager disabled. But now I have nuked that installation and replaced it with FC10. Network Manager is nice, and I would like to use it. And it kind-of works. Network Manager recognizes my router and all my neighbor's routers, but I can't connect.
[Code]....
View 5 Replies
View Related
Jul 9, 2011
my wireless network doesnt recognize that any network is around. The broadcom STA driver will not install and it says "Please have a look at the log file for details: /var/log/jockey.log" the jog file says
2011-07-09 21:21:33,921 WARNING: /sys/module/wl/drivers does not exist, cannot rebind wl driver
2011-07-09 21:21:33,987 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
[Code].....
I'm on 11.04, im on a macbook 6,2 i7. The wifi worked when i booted from cd but now it doesnt work once i installed.
View 2 Replies
View Related
Jun 21, 2011
I have recently installed Ubuntu 11.04 on a Toshiba Satellite laptop that used to have Vista installed on it. I've been trying out various Linux live discs (eventually choosing Ubuntu) for over a year now, and whenever I've been on a live disc, the laptop has been able to connect wirelessly to the internet and browse the web. I have a NETGEAR router and I have always been given the option in the upper right to connect to NETGEAR. Tonight, when I installed Ubuntu, I chose to wipe the hard drive completely (I backed up stuff already), and it asked me if I had an internet connection. I tried to connect to NETGEAR but it wouldn't work. This made me a little suspicious, but I chugged along with the installation anyway. Now that it's fully installed, when I go up to see the list of wireless connections, it doesn't give me any options; everything is greyed out. What do I do now? I just wiped an entire hard drive and can't use the internet.
View 1 Replies
View Related
Feb 6, 2010
I'm not getting a response over on the Ubuntu WIreless Forum (which looks like it's getting slammed with questions), and weigh in on whether or not you believe I have a hardware failure on my hands? As I state in the post, I ran fine from the original installed version, 8.10, through 2 upgrades (to 9.04 and 9.10). Now none of them work (When the problems began I re-installed each of them in turn in order to test).
View 2 Replies
View Related
Aug 31, 2011
i have a dell inspiron 15r that i plan on running fedora on, however, today i booted fedora from a live cd and it was completely oblivious to the fact that i have a wireless card, obviously i need certain drivers for it, problem is i dont know what drivers those would be, or where to get them, http://www.dell.com/us/business/p/inspiron-15r/pd this is my laptop model, and it says i have a "Standard Dell Wireless 1501 802.11 g/n" wireless card, if anyone could tell me how to get this working,
View 13 Replies
View Related
Oct 14, 2010
I have an HP a670y desktop computer using the included wireless antenna (looks like a big Sorry game piece). I am running Ubuntu 10.04 x64 dual booted with Windows Vista x64. I haven't had internet for a while but just got it today and decided to do some updating in both Windows and Ubuntu. It had detected my router and I copied and pasted the WEP key then it asked for my password, but my keyboard wasn't connected so I clicked cancel for the password window and it connected anyway.
I opened the Synaptic package manager and started downloading some updates while I did some browsing on the internet. I had restarted my computer when the updates were done and it asked again for my WEP key. I copied and pasted just as I did before and entered my password and after it tried to connect it asked for my password again. I thought maybe the internet was down so I decided to boot up Windows and it connected right away. I wonder if one of my updates messed something up. Has anyone else had this happen?
View 1 Replies
View Related
Apr 23, 2011
I've been using Windows all my life (and still have to use it at work) but I made the big leap yesterday and installed Ubuntu on my personal machine (at last). With my "Windows-centric" mind, there are a million things that I still don't get, but I must say the community and forums look quite impressive and easy to access (kudos! ). I am testing this today!My current problem is with the wireless adapter. I have a Belkin N Wireless USB adapter (FSD8053v3) and Belkin, of course, doesn't make linux drivers. When I installed Ubuntu, it recognized it automatically and I could connect to my network, but navigation was very slow so I tried to install Belkin windows drivers using ndiswrapper. It worked immediately, and navigation was very fast. However after a reboot, I lost the connection, I can't even see any of the neighbouring networks.
View 9 Replies
View Related
May 13, 2010
I am trying to get the Dell 1395 (Broadcom) wireless card to work on my PC and having a nightmare. I am certain the bulk of the reason is my inexperience with Linux but all the same it is causing me no end of problems.I have found the following sites which suggest ways to get it working
[URL]
Unfortunately I can't get either method to work on my Fedora 11 installation. I don't mean that I complete the steps only to find it doesn't work, I mean I can't even complete the required steps because I appear to be doing something wrong or be missing a crucial command tool.When I try to run the broadcom method I get as far as the make (or make clean) commands.
The make clean results in:
Code:
KBUILD_NOPEDANTIC=1 make -C /lib/modules/`uname -r`/build M=`pwd` clean
make[1]: gcc: Command not found
make[1]: Entering directory `/usr/src/kernels/2.6.30.10-105.2.23.fc11.i586'
[code]..
If I try the other method I get into problems when I get to the ndiswrapper section as the install can't find ndiswrapper-common.
View 6 Replies
View Related
Nov 4, 2010
having a weird problem with my wireless connection on a Dell Latitude E6400 laptop.This machine has a Dell 1510 half-card. It uses a Broadcom chipset.I've gotten to the point where fedora sees the card, and I can create wireless connections. But every time I try to connect to a network, it scans, connects, and disconnects several times, until it gets a completely bogus IP address, that has nothing to do with any of the networks onnect to. It is always "10.42.43.1", yet I have no static configuration for that address.
Code:
# lspci|grep -i wireless
0c:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN
[code]....
View 5 Replies
View Related
Jul 7, 2011
I have a problem with my laptop fedora 15 does not detect the wireless network target of Intel Centrino Advanced-N 6230 and Bluetooth 3.0.
View 2 Replies
View Related
Jan 15, 2010
I have install 64bit version of Fedora 12 on a new Dell Inspiron 1545 with a Dell 1397 wireless card. It actually uses a Broadcom BCM4312 chip.
I have install the following rpms:
Code:
broadcom-wl-5.10.91.9.3-1.fc12.noarch
kmod-wl-2.6.31.9-174.fc12.x86_64-5.10.91.9.3-3.fc12.11.x86_64
kmod-wl-5.10.91.9.3-3.fc12.11.x86_64
code....
what I do not understand is the state of the card as unavailable. how I can activate this card?
View 2 Replies
View Related
Aug 10, 2010
I did what i did before but cant decipher why it wont work. It did work after the initial kmod PAE install, but after the update and I assume kernel change it wont work.
[Code]....
View 1 Replies
View Related
May 19, 2011
Recently I have installed Fedora 14 on my other laptop. It's a dual boot with Windows 7. Everything worked perfectly fine, networking included, until my friend didn't accidently turned off the wireless by pressing a wireless button on the laptop. Since then the wireless on Fedora doesn't work. It does on Windows thought. I've tried restarting the laptop few times, but the wireless still doesn't want to work again.
View 2 Replies
View Related
May 14, 2011
I just installed Ubuntu 11.04 on my Dell Latitude D420 and installed the restricted driver for WiFi but it still doesn't work. It worked great on 10.10.0c:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
View 3 Replies
View Related
Feb 18, 2010
I have a Dell Latitude D800 with a Dell Wireless 1350 (802.11b/g) WLAN miniPCI Card. I need to install wireless on this laptop but I see no wireless card when I know I have the above wireless card. Here are some commands that I ran that I might prove useful:
[Code]....
View 6 Replies
View Related
Nov 19, 2009
I have a bcm4312 wireless network adapter that worked in F11 after following this guide: [URL]. Now, the wireless adapter won't work.
View 14 Replies
View Related
May 27, 2009
I am currently running Fedora 10.92 on my desktop and have a linksys network card, one of the ones that uses the b43 wireless driver. Fedora sees the network card, wlan0, and driver but I can't get it to see the router and connect. I have tried to manually put in the ip,ssid, ect but to no avail. I tired starting network manager from terminal which worked for me in fedora 8 and ifconfig wlan0 up but nothing seems to work.
View 3 Replies
View Related
Mar 16, 2009
I have a Dell inspiron 1420 and its set up as a dual boot. Windows/Fedora.I cant get the wireless card to work. I review some previous posts but still cant get it working.
I did a /sbin/lspci
Network controller: Broadcom Corporation BCM4310 USB Controller (rev 01)
I did $rpm -q b43-fwcutter
b43-fwcutter-011-3.fc9.i386
View 14 Replies
View Related
Nov 1, 2010
I used to run an application named DBabble (client) through Wine back when I used 11.1. Then, the version of Dbabble client was 2.2h -I still have the exe-. Now I tried this same version on 11.3 with Wine, and this is what I got:
ImageBam - Fast, Free Image Hosting and Photo Sharing
Latest version of the client is 2.9i, and this one seems to work fine, but the server I want to connect needs client 2.2h. I thought it was the Wine version, but a friend tried the exe in a system with 11.1 and latest Wine, and it worked for him.
So there's probably a change in 11.3 that broke this app under Wine. Is there a solution or workaround for this on 11.3?
View 4 Replies
View Related
Apr 10, 2009
my net worked HP printer will not print-broken pipe - this started after I had to switch off the printer at the mains in order to attend to a paper jam. Now it will not print apart from a test page. I am using Fedora 10 and the device info is "hp:/net/Officejet_Pro_L7500?ip=192.168.0.4"
View 5 Replies
View Related
Dec 15, 2009
I'm using this card on a Toshiba Tecra M3 laptop. Firmware is installed. iwconfig shows the following:
Code:
eth1 radio off ESSID:off/any
Mode:Managed Channel:0 Access Point: Not-Associated
[code]...
View 2 Replies
View Related
Jan 22, 2010
I have a dell d800 laptop using a hp 802abg nic and it doesn't properly initialize until gnome desktop is loadedI'm using 128 bit key and a hidden network name.I would like to have wireless networking running before /etc/rc.local is executed at boot time to connect to nfs shares.after gnome is loaded and I login to user account, wireless networking starts and connects.When I set inittab to 3 and boot machine, ifconfig and iwcfg report card doesn't exist, when I then telinit 5 and start x/gnome card gets properly setupis it possible the card doesn't get initialize3ed because the network key needs to be entered in a file somewhere that the boot sequence can access it and init the card properly?
View 7 Replies
View Related
Nov 15, 2009
I've currently got the beta of fedora 12 installed, hope to upgrade that once the final release comes out. I'm having so many problems getting wireless to work. I've got a edimax ew-7711utn wireless adaptor. It doesn't work. Really what I want is to take it back and get a wireless card that will work.
View 6 Replies
View Related
Sep 7, 2011
I installed Fedora 15 64 bits version on my desktop, and I'm having hardtime activating my wireless card.
I tried following the instructions from this thread without success [url]
Here are the logs of some of the commands I used
lspci output
Code:
iwcconfig
Code:
Code:
View 1 Replies
View Related
Feb 9, 2011
The tap of the touchpad not working in Fedora 14 have to click with the left button of the laptop.
View 4 Replies
View Related
Jul 17, 2009
I am a convert from Ubuntu (9.04 kept freezing on my laptop; when it did work, many packages it seemed were outdated--ie only Eclipse 3.2, rdesktop was messed up [and apparently is also in Fedora]), and I am having some trouble with getting my wireless working.I am running Fedora 11.First off, there is a problem when trying to connect when using DHCP. NetworkManager gets to the second green dot, and then after a short while I am given a message that the connection was disconnected.
Configuring the interface manually, not using DHCP, allows the connection to complete. However, the internet is very slow. There is a 15-30 sec delay before website loading actually commences, and then another delay each time an ad must be fetched from another server.How can I fix this delay? I know I have encountered it in earlier versions of Ubuntu, but I can't remember how I fixed it.About the rdesktop problem, if anyone is able to help [maybe I should post another thread?], the cursor color (the color of the pointer) is inverted---where it should be white it is black, and where it should be black it is white. I use rdesktop a lot to connect to my terminal server in my basement. Any idea how to fix it?
View 5 Replies
View Related
Aug 23, 2009
I wireless network card is Broadcom Corporation BCM431, but is doesn't work after I update kernel from
2.6.29.6-217.2.7 to 2.6.29.6-217.2.8.
Linux localhost.localdomain 2.6.29.6-217.2.7.fc11.x86_64 #1 SMP Fri Aug 14 20:53:08 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
View 2 Replies
View Related