OpenSUSE Install :: Boot Menu Bug – Hard Disk Arrangement – Doesn’t Play Nicely With Windows
Nov 16, 2010
i come from ubuntu installation and i have had opensuse before and i remember installing any of thede two without any problem on any of many harddisk arrangement. but thge ltest opensuse 11.3 doesnt pllay nice with my windows and ubuntu installation booting. i reember using boot loader in yast and it used to load the coorect setting from scratch. but now when i chose "propose new configuration" and it founds opensuse and three other windows!
[Code]...
View 9 Replies
ADVERTISEMENT
Aug 31, 2011
I've recently added a new hard disk and due to mother board controllers this new hard disk is known as sda.Before that my boot partition was /dev/sda3 and know this changed to sdb3.Whenever grub menu appears and I choose opensuse,it can't find /dev/sda3 .It seems that I should edit menu.lst or change boot loader parameter.something like root (hd1,2).But I don't how I can do this with opensuse boot loader.Though I could do this with CentOS easily.
View 7 Replies
View Related
Jun 3, 2011
I can eventually use the ssd for a Gentoo install but it takes too much work(more than it should). What happens is that every live or install cd I've tried automatically decides that the ssd is a raid device and sets it up as raid with double the size. Its 32GB and its set up as 64GB. Of course it doesn't work.
I have to manually unmount, turn off dmraid, install and then disable dmraid completely(I have trouble doing this on OpenSuse). The SSD I'm using is a Patriot100 MLC 32GB. Other SSD's that I've tried have no problem being found and manipulated with cfdisk, fdisk or parted but my Patriot SSD just doesn't want to play nice.
View 1 Replies
View Related
Jul 7, 2009
I have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.
View 3 Replies
View Related
Jun 10, 2010
i wiped my entire hard drive that had xp as its only OS. I freshly installed a Windows 7 ultimate and everything went perfectly. I then decided to install 10.4. I split the partitions correctly (i had experience doing this already with my laptop, which has xp/10.4). Ubuntu 10.4 install went flawlessly, except for one thing. Now when i boot up the pc, it goes straight into 10.4. I have tried holding shift during the start up to force the boot menu, and it just shows the Ubuntu 10.4 OS as choices. Any clue what i could do to make Win7 appear in the boot menu?
View 9 Replies
View Related
Dec 5, 2009
I already had windows installed on the c drive so linux suse 11.2 has been installed onto d. There was a problem after I finished the install - after I rebooted no menu appeared, the pc just hung on a black screen with flashing cursor, so I put the linux DVD in again and rain a repair. It repaired the boot menu but now there is no option to boot into windows.
View 9 Replies
View Related
Apr 8, 2011
I have multi-version Kernels on a Dual Boot WinXP / openSUSE 11,3 box. It's been a LONG time since I needed to boot to Win XP and now that I find that I can't get to it, I can not say for sure what I did to break it. Looking back, I suspect that the method I used for the recent removal of one of the Kernel versions may have been innappropiate. Rather than unchecking in versions/package groups I may have just removed the unwanted kernel in the package list. Not sure. I've tried dinking around with menu.lst and Yast Boot Loader to no success. I get errors depending on what I messed with. Didn't try to reinstall grub until I checked here for help with a fix.
Here's some info:
Code:
View 9 Replies
View Related
Feb 20, 2011
Caused by Used fdisk to delete the windows partition, in my dual boot. Then I could no longer log in to ubuntu, the partition table was some how courpt and I couldnt remount I then decided to use the windows partitioner from windows setup, as I thought it is so stupid, to reformat the partition where I had ubuntu. I wanted reinstall ubuntu, and I know that during the setup I could straighten out the mess I'd made.
Windows has now installed two 8mb one cylinder partitions on my HD. When I start the PC I get a !disk error occurred Press Crlt Alt Del to restart! This happens everytime. HD boot sequence is buggered, i guess.
I can boot from other devices. USB + CD. How when I use the windows disk to boot up I can see the 2 8mb partition, which it wont let me delete. How can I delete this via linux?
Also when I try to install ubuntu from the usb drive, it stalls just after the Preparing to install part. The next screen is when you set the partition table, swap drive etc. When I quit I get the following error !Process Glib WARNING getpuuid_r() failed due to unknown id!
The usb_liveCD does however mount my hard disk partitions and luckily I have managed to back everything up to an external.
results from df
/var/log# df
Filesystem 1K-blocks Used Available Use% Mounted on
aufs 766804 68140 698664 9% /
none 760892 244 760648 1% /dev
/dev/sdb1 3911856 712128 3199728 19% /cdrom
[Code].....
View 4 Replies
View Related
Oct 7, 2010
We were trying to install w7 on a reserved partition. W7 did not like the partition (whatever we tried).
Since we had 3 hard-drives, on the allocated drive we deleted all partitions and set the partition table type new to MSDOS (yast etc.....).
W7 installed fine. We did not time it, but it appeared that 11.3 installs faster plus considering 11.3 installs quite a number of applications.
There are plenty of postings re integrating W7 to the Grub-menu.
This system went through several Suse updates, hardware upgrades, basically was all over the place.... we did a "new" install of 11.3 allocating its own hard-drive.
Install......fine, and Grub entered W7 to the menu. Worked ! Mounted the windows partition to /home/yourusername/windows
So, if you really (?) need W7 and have a spare hard-drive, this maybe is a clean solution.
View 7 Replies
View Related
Sep 20, 2010
My dual boot Windows 7 and Opensuse 11.3 doesnt work anymore, i have to keep repairing the OS i want to use, i fix one and that breaks the other, how can i fix this so both work
View 7 Replies
View Related
Sep 19, 2010
Its basically an old SATA Hard Drive with a Windows XP partition I was trying to sell.When my computer does the BIOS checks, it doesn't pass the SMART test (but I can boot it anyway), although I can't boot Linux in any way with this Hard Disk connected (I even tried Live CD distros, like Parted Magic).I can boot the XP partition from inside the disk, although I guess its pretty close to not being able to. Is there any way to "fix" this Hard Drive?
View 3 Replies
View Related
Mar 28, 2011
i've had windows all my life. heard about ubuntu 10.0. thought i tried it out. i tried using some dual installation with windows or something (im running, well WAS running vista, btw) i dont know WHAT i did. i got ubuntu working, but Windows does NOT show up in the boot menu?
View 9 Replies
View Related
May 20, 2010
When I try to install 10.4 on my hard drive, I get all the way to the "Prepare Partitions" menu and there are no disks listed and all button are grayed out. I am installing on an EVGA X58 motherboard with Intel ICH10 and I have AHCI enabled. Does Ubuntu support AHCI? Do I need drivers to install?
View 3 Replies
View Related
May 25, 2011
Today I decided to give Fedora15 a shot, mainly because of Gnome3, and so decided to install it over my Ubuntu installation. This is my partition scheme:Two NTFS partitions for Windows;
One logical partition, which inside has:
/dev/sda5 for /boot
/dev/sda6 for /
[code]...
View 14 Replies
View Related
Jul 17, 2010
Since upgrading to Lucid (I think), I can't boot into Windows. When I select the Windows Vista entry in GRUB, the screen goes blank for a moment before returning me to the GRUB menu.I have tried pressing 'e' to edit the GRUB entry before booting, and what I find is that it says the root is hd0,1Since my Windows partition is sda1 in GPartEd, should that translate to, for example hd0,0 ?The only reason I want to boot into Windows in the first place is to install a BIOS upgrade from HP, which only works with their Windows software. If someone can suggest an alternative way of doing this then I won't need to boot into Windows at all.
View 9 Replies
View Related
Oct 1, 2010
I have a dual boot System with Ubuntu 10.04 Netbook Remix and Windows XP SP3 on an Asus eeePC 1000HE. I had some troubles with updating kernels etc. and I ended up with following problem:
After grub reinstall, I am able to boot Ubuntu, also I can mount the windows partition properly. Trying to boot into Windows, I get the error:
Code:
It's all on one hard drive which doesn't show any errors:
Code:
Partition table entries are not in disk order
Code:
Some partitions don't show a file system because they are luks-encrypted.
As I mentioned earlier, I am able to mount sda1. I think the problem is that the Partition Boot Sector is corrupted, even though I am not sure if the ntfs partition is damaged at all or if GRUB is the problem.
As I said I had problems with a kernel update and therefore had to reinstall GRUB. I think, but I am not sure, that I accidentally installed GRUB on sda1 (the windows partition) instead of on sda. After I installed GRUB on sda again, I was able to boot linux and fixed sda1 with testdisk. Before, sda1 showed as four partitions (sda1p1, ... , sda1p4). I was not able to mount sda1 till I fixed it with testdisk. testdisk says the Boot Sector of sda1 is OK, so does ntfsfix.
Finally, an extract from my /boot/grub/menu.lst:
Code: ...
The Windows XP entry is added by myself. I don't know much about grub, so there might be the error.
I tried to keep it as short as possible (this is only the end of the story), I hope I didn't forget anything important. Please ask if there is something not clear.
I am in Tanzania with this netbook, so it is not possible to boot Windows CD and fix the windows partition with it, also I don't have a very fast Internet connection.
Is there a way to fix this without a Windows CD? Maybe it is just a dumb mistake in the menu.lst?
View 9 Replies
View Related
Jan 24, 2011
This setup used to work:
MS Access running under Win2K in a virtualbox on a Debian machine. Win98 running on a 230MHz PC using VNC to use the MS Access. The Windows PC is upstairs, the Linux boxes are downstairs. I have not used this setup for about a year or more. Since then KDE 3.5 was vandalised and renamed KDE4. I upgraded the Virtual machine to Win XP.
Now the Linux boxes are not accessible via VNC. All the client gets is a grey screen. This goes for Linux-Linux and Windows-Linux connections. I can connect from the Win98 to the Virtual machine but the connection is slow and the display is poor. I have gathered that VNC and KDE4 do not play nicely together. I would prefer a "least effort" solution for the time being. Later on I can set up a Linux box to replace the Win 98 one.
View 1 Replies
View Related
Jun 12, 2011
Is there any way to turn off the load balancing that occurs when ubuntu detects two active network connections? To be more specific, I have two networks set up, one of which is supposed to be for regular web traffic while the other network is dedicated to streaming various things throughout the house. Whenever I try to connect my server to both networks at once ubuntu "load balances" traffic from the web network onto the streaming network, which completely defeats the segregation I was going for. So far all of my attempts to turn off that behavior haven't worked at all. I'm currently running Ubuntu 10.10.
View 3 Replies
View Related
Mar 1, 2011
I have a dualboot installation of Linux and its commercial rivals.I noticed that Linux makes great hard disk noise that I was not able to hear while using Windows.Is it due to filesystem?
View 9 Replies
View Related
Apr 24, 2011
Acer Travelmate laptop, 1.3GHz Pentium M, 12MB Ram.pensuse 11.4 (upgraded from 11.3)Vanilla install, not running anything special, always startup and shutdown from scratch, never sleepFor several minutes after KDE appears and I open an app (any app, e.g. Chrome) the hard disk is going nuts. WTF is it doing and how do I stop it? Also some programs take years to start, e.g. digicam took TEN minutes the other day even after waiting a while after booting, the disk thrashing the whole time. But in 11.3 it started almost instantly.
View 9 Replies
View Related
May 27, 2011
I am going to install the ubuntu 10.0.4LTS to my hard disk under windows XP, here is what i tried
1.down the iso:ubuntu-10.04.2-desktop-i386.iso file from ubuntun.com
2.down the unetbootin-win-549.exe and write the iso file to my USB disk
3.reboot my system to boot from usb disk
4.as i expect, every thing goes well util i got the err like this:
Installation Failed The following file did not match its source copy on the CD/DVD: /target/use/lib/openoffice/basis3.2/program/lib/plug_genli.so
[Code]...
View 9 Replies
View Related
Oct 22, 2009
I need to install windows xp and linux in separate hard disk on my computer.Is it possible?
View 2 Replies
View Related
Jun 28, 2011
I was going to try to install plop on a windows 2000 so that I could dual boot win and linux. I ran [URL] to install. In the command window it said that the program can't be run under a Dos box and only to continue in I was not running in windows. If I tell it to continue, windows gives me an error message that says it is trying to write directly to the hard disk. It asks me to abort or ignore. If I ignore, the program seems to run. Is this not the right way to install plop to the hard disk?
View 2 Replies
View Related
Mar 1, 2010
I have a hardisk shared on my windows machine. And I would like to be able to access this on my opensuse notebook. Just cant figure it out. Dont have much experience in opensuse. I just need to know the best way to do this. Also, can opensuse read/write NTFS? Also I have a printer on my moms machine that runs XP home. The printer is shared I would like to be able to print but its no biggie. It some type of HP 3 in 1. I just wnat it to print, I dont care about the scanner and stuff.
View 3 Replies
View Related
Nov 1, 2009
I have installed on my computer Fedora 10, now I want to install opensuse and create a dual boot environment and I want to have them both on the same hard disk. how to carry on with this task?
View 7 Replies
View Related
Jul 4, 2011
When i try to install UBUNTU 11.04 it shows me the warning that there is no OS on my hard disk.But i have windows XP SP3 & UBUNTU 10.04 on my hard disk. Will all the files be deleted on my hard disk containing Windows XP if i install UBUNTU 11.04? How can i solve the problem?
View 3 Replies
View Related
Sep 9, 2010
I have read other posts regarding the installations of different distros on external hard disk, but these did not help..
I want to install fedora 12 on a new external hard disk, so that i can boot from it on any system that supports booting from usb hard disk, and do all my work from the extenal hard disk itself. I want to know the exact procedure to install fedora on extenal hdd, and what do i need to do, so that the grub, (which i will install on the /boot partition of external hdd), get detected by the primary boot loader of mbr..
Or, I just need to boot from external hard disk.. please any one try to make it possible.
View 5 Replies
View Related
Jun 28, 2011
I just received Phil Mickelson's "Secrets of the Short Game" DVD but it keeps stopping when I play it on either my PC's DVD drive or an external DVD drive - using VLC.Is there a software that will allow me to copy and play it from my hard disk?I tried a simple Dolphin copy but that stops as well.Is there something that I am missing?Also, it will not play on my DVD player - it just keeps ejecting it
View 14 Replies
View Related
Sep 13, 2011
I would like to test 12.1 M5 on my real hardware, so I have special for this purpose two additional partitions (sda2 (to install milestone) and sda3 (to store installation ISO files)). I am running my stable 11.4 with Grub on sda1.
I do not like to burn DVDs just for short test of one milestone, so I was used to download DVD ISO, to unpack it to sda3 partition with all its files, then I changed Grub to boot install Linux from sda3. Installation complains there is no DVD or CD, then I chose to force installation from hard disk and select sda3 partition and select root directory "/". As I was used to from 11.4 this will start installation as it would be started from DVD.
But I think the problem has appeared since 12.1, where I get message: No repository found. (on sda3 / ), so the installation does not start.
I know this is not official way to install openSuse, but it worked before, and it was fast and easy for me, to install from hard disk.
View 3 Replies
View Related
Jul 5, 2011
I've used YAST to include a USB hard disk in the export list and mount it to remote machine with NFS. That worked first time the disk was mounted. On the next reboot I saw that the USB disk was mounted again in "/media" but in new folder and its previous folder existed but empty and was mounted with nfs. It seems that first nfs comes mounted in booting time and then USB gets mounted after logging as a user. USB hard disk finds its folder occupied and automatically creates new folder in "/media". What should be done in order to USB hard disk and nfs to be mounted in the same point automatically on the boot ? The second question : When I mount an external disk to be accessible remotely with nfs I get refused to unmount the disk as a USB device. Is it possible to be unmounted as a USB disk done without unmounting it as a nfs as well?
View 5 Replies
View Related
