Suse 11.1 opera 10. When I shut down opera browser I assume it should shut down completely? Infact sometimes it does, but often it just goes to sleep (futex_wait). Any way to make it shutdown/kill itself every time ???
View 5 RepliesI'm using Gnome 2.30.2 with Ubuntu 10.4 would like to shut down X Windows properly. Using sudo init 3 from console 1 or a terminal on the Gnome desktop results nothing. There are a bunch of ways of doing accomplishing this that I've seen, but the most recommended methods each cause the same errors. The methods that I've used are sudo service gdm stop, sudo stop gdm && sudo pkill X, and sudo /etc/init.d/gdm stop. After these commands are run I receive the following message: gdm stop/waiting.
Then I switch to console 7 & notice that the screen is frozen & has the following information:
There is a blinking cursor below this message & the terminal does not respond to any command including Ctrl z.
These are the same messages that are normally quickly displayed when linux normally boots.
I disabled the battery power option in & removed other unnecessary startup processes from System, Preferences, Startup Applications. I've tried running the gdm stop commands from terminals 1 & 2 as well as consoles in X Windows & it produces the same results. For some reason though, the gdm commands do work when I used the restart option.
I have an mysql innodb ~ 20gigs. Normally shutting down mysql (service mysql stop) takes a few seconds. When I reboot Ubuntu with the reboot or shutdown command it just reboots it super fast without mysql logging (/usr/sbin/mysqld: Shutdown complete) Also during this shutdown the following is failed: umount2: device or resource busy /data: device is busy.
mysql is setup to read from /data . Why is ubuntu not waiting for mysql to properly shutdown before unmounting the filesystem and rebooting?
I 10.04 32bit server edition on a box I had lying around, set it up for samba+upnp, and everything was going great.
When rebooting, the server now turns the monitor off, and I'm not sure if anything's loading. I see the initial dell splash screen, and hear the hard drive start to run, and then the monitor goes into standby.
i glad i switched, but still have lots to learn. Any who, currently i am working on a server for some residents at my current job. I have DNS and everything setup right and it is working. Samba on the other hand is configured right but it keeps shutting down after about a minute. When i run this command:
chksmb status
it says "Dead". Ill restart the service(rcsmb start), and keep checking the status, and after about a minute it shuts down again. I have done a restart, double checked my configurations and still cant find why this is happening. (config file somewhere?)
how to stop the instance before shutting down. I tried dbstop and oracle stop, but neither work.
View 5 Replies View RelatedI have a lenovo y560 with opensuse 11.4 installed on it. My graphics card gets really hot in opensuse, so I am trying to shut it down permanently as I dont need it. I added radeon.modeset=0 to grub and even though the module is not getting loaded, the graphics card is still powered on. This is my lspci
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Madison [Mobility Radeon HD 5000 Series] [1002:68c0] (prog-if 00 [VGA controller]) Is there any way to power it off?
I have installed Opensuse 11.3 32bit on my machine. Everything works except it will not reboot or shut down. I get as far as the lizard then it stops like It does not know how to. I run su user in terminal and give init 0 command and it will shut down. but init 6 just does the same as reboot above.
View 9 Replies View RelatedOn shutting down,I get an "Ooops!Unmounting failed." since a while.I think,it`s due to an improper USB-stick removing.How can I repair this ?
View 9 Replies View RelatedI have never been able to see the splash screen, something that I'd like. I have checked the options on the bootloader and it says "splash=silent" (that's disabled?). I found it confusing, because the ubuntu kernel boots with "splash" but when I try that option on OpenSuSE 11.2 it doesn't.Also when I shut down the laptop the screen goes crazy, only the two top cms shows "something" which are blinking and crazy green and white console words moving from one place to another so fast I can't even been able to read what it actually says.Either way, the laptop shuts down without any problem (?). I think is the normal shutdown process (without splash) but it's a bit perturbing. I've had had a couple of kind of "aesthetics" issues, but far from critical. My overall experience with OpenSuSE after 4 or 5 years being "debianized" have been very nice .
View 3 Replies View Related'm running openSUSE 11.2 with KDE 4.4.2.
Since i installed KDE 4.* Whenever I go to shutdown, I get the shutdown dialogue, I hit shutdown, it logs me off, shows some text on shutdown screen, and then opens up the GUI again, bringing up a small window, where It asks for the root password, in order to shutdown. If i don't give it the root password, it goes to the login screen.
I cannot, any way, command line, GUI, or anything, shutdown without providing a root password.
If I use the command shutdown now, as root, it logs me off and goes through an endless cycle of logging off, and then asking for root to shut down, and not shutting down (All on the CLI), and everytime i give it the password, it cancels shutdown and goes back to the prompt. I eventually have to pull the battery to kill it in that case..
I have tried chmoding the shutdown scripts to make it work, it doesn't.
I cannot log into the normal user account after shutting down the OPENSUSE 11.1 system by cutting off electricity. The system always returns to the login page which requires to choose account id and enter passwd even when I type in correct normal user id and passwd. The root account can be used.
View 9 Replies View RelatedAnyone having trouble printing pages from opera 10.10 in opensuse 11.2.
View 5 Replies View RelatedI like to add a Newsgroup but it seem that I can't. Is this correct? I did a look up but found nothing really to this issue. Anyway, I just need to know if this is the case. I am using 10.61.
View 3 Replies View RelatedI've performed a new installation of openSUSE 11.3 and I see a lag while starting Opera - close to 10 - 15 seconds.... I didn't have a similar issue with 11.2.... I notice this not only in KDE but in Gnome as well.... This happens only with Opera and not any other application.... These are the details about my Opera installation:
Code:
Version 10.60 Internal
Build 6386
Platform Linux
System x86_64, 2.6.34-12-desktop Can anyone else using Opera confirm if they're facing a similar issue.... If not I can submit the logs at Opera website to see what might be the problem...
Is there any plan to move Opera 11 to an openSUSE repo? It came out a few days ago and I'm wondering if it will be included in "non-oss" or in "updates"?
View 2 Replies View RelatedI've asked this on Opera's forum also with no replies yet.When ever I click on a url link, Opera insists on opening two additional identical tabs over what is already there. This happens whether Opera is open already or has to be started from scratch. The link could be in KMail, Akregator or even a link on an applications About box, it makes no difference. I have set Opera up as the default web browser and I am using the following command "opera %u"
View 4 Replies View RelatedI have opensuse 11.2 and I have no sound from opera or firefox. I have checked Yast and it looks like all of the default sound apps are loaded. I have a newer PC with soundcard on the mobo. I also have XP on this machine and the sound works.
View 5 Replies View Relatedi changed my kde color scheme and it changed firefox's and opera's color scheme. sometimes it can be difficult to read links or articles on web pages. i don't want to change their default color schemes. how can i do that ?
View 1 Replies View RelatedWhen I've downloaded it it says:
The name org.freedesktop.PackageKit was not provided by any .service files
I'm on suse 11.2 gnome, 64bit.
I have opera 10.10 and I tried to install java to access some banking in so many ways. I got a headache: I uninstalled java, reinstalled it, uninstalled openjdk, reinstalled opera, enabled plugins, enabled java at the opera: config and operalugin, put the path to the plugin on the advanced tab.
View 9 Replies View RelatedWhen I tried to log in this morning I couldn't until I enabled Java scripts in my Opera browser. This must be something "new and improved". Could someone confirm this? I would prefer "old and lousy" rather than open up my computer to the world at large.
View 1 Replies View RelatedI am running into a problem with my xen installation. So far I have:
- installed 11.4 64bit
- installed hypervisor and tools (I created br0)
- boot into xen kernel
- run a zypper update
My current configuration is:
Linux linux-c7sq 2.6.37.6-0.7-xen #1 SMP 2011-07-21 02:17:24 +0200 x86_64 x86_64 x86_64 GNU/Linux
using patterns-openSUSE-xen_server-11.4-6.9.1.x86_64:
- bridge-utils-1.4-63.1.x86_64
- xen-doc-html-4.0.2_02-4.9.2.x86_64
- xen-doc-html-4.0.2_02-4.9.2.x86_64
code....
Does anyone have the same problem? There was nothing on google on this, and the xs_handle cannot be debugged as xs.so isn't visible to me.
I just installed GroupWise 8.0.2 and I want to use it as a pop (and if possible) exchange client. It's been a while but I remember that if you don't want to use a GroupWise server you just needed to select 'Caching Mailbox Path' and give it an existing path. If I do that now it just keeps asking for the hostname of the GroupWise server.
Is this a bug or is this feature disabled?
I am running OpenSUSE 11.3 64-bit gnome
I'm using openSUSE 11.4 Tumbleweed with KDE 4.6. I started using emacs and I wound when I scroll, emacs gui does not refresh the screen properly, and the characters get messy.
Especially the first column (first chars in every lines) does not go away for a while when I scroll.
how can i restart properly X and kde?
Use case: I've update my system, with some X and kde. I don't want to restart, so i go to vt1, login as root, and type "init 3". X and kde shutted down. After i type "init 5" to get back everything.
But if i logout vt1, X and kde are also gone. I know that's normal, but i want to start X and kde as they start on boot. It's the same with a normal account and "startx" or "startkde"
I am a Java developer for a small company that develops web based solutions to our clients. My Linux skill levels are somewhere between newbie and experienced.The company I'm working for has hosted server that is self managed due to the nature of the software that we develop. The server is located in a data center and the host is fully responsible for maintaining the hardware.Recently the motherboard of the server failed and had to be replaced, this happened promptly, however when the server was booted up I was notified that our Linux is giving problems starting up.I was given access to the server via a Raritan lara (KVM-over-IP).
This enabled me to configure the network again.A few things I've noticed with this however. The old network interface was named eth0 while after the swap the new one is named eth1. There is a failure message for bringing up the NIC named eth0 (old non-existing one).Further after the re-configuring of the NIC (IP, subnet etc) I could connect to the server via SSH, our Apache was running without any visible issues (didn't notice anything in the Apache erroe log). The web frontend on JBoss was running good but I kept getting the failure to start eth0 message on startup. As well through the KVM device you never saw the login prompt, it just hangs on some point (once it was after saying httpd2 started up successfully and another after CRON).I have no idea of where to go look for this issue and I can't even say for sure that it's after the motherboard issue as I could use SSH without a problem after the NIC configuration as I used to connect to the server.I've further looked at dmseg but that also doesn't give any indication for me.
How can I set up multipath to two devices properly? I'm sure that I need to do something more then just: /etc/init.d/multipathd start
View 1 Replies View RelatedWhen I first boot my computer the Panel clock displays UTC time for about the first 2-3 minutes then switches to Local (UTC-5). My hardware (BIOS) is on UTC. Running KDE 4.3.1 on openSUSE 11.2 64 bit. I dual boot Mint 8 64 bit also and it starts correctly with local. Not the end of the world but I have never saw this behavior before.
View 1 Replies View RelatedI have iunstalled AA2.5 and found that after exiting it still resides in memory and blocks any sound in other applications until terminated via system monitor.There was no such behavior under Ubuntu. So my question is how to make it exit normally?
View 9 Replies View Related