I just installed GroupWise 8.0.2 and I want to use it as a pop (and if possible) exchange client. It's been a while but I remember that if you don't want to use a GroupWise server you just needed to select 'Caching Mailbox Path' and give it an existing path. If I do that now it just keeps asking for the hostname of the GroupWise server.
Is this a bug or is this feature disabled?
I am running OpenSUSE 11.3 64-bit gnome
I am battling to install a groupwise client on my ubuntu 10,.4. I downloaded the tar.gz file from novell and then uncompressed the file to reveal a directory. Therafter i tried to use alien to convert the .rpm file to .deb and it did that as well.However when i try to install the .deb file in ubuntu from a terminal it give the following error.
===
sudo dpkg -i novell-groupwise-gwclient_8.0.0-84910_i386.deb
(Reading database ... 151254 files and directories currently installed.)
[code]....
This seems to be a problem that haunts me whatever version or variant of Ubuntu i have installed... When i start empathy the first time, everything seems fine. But every-time i reboot, i have to do: sudo apt-get purge empathy && sudo apt-get install empathy or i'm not able to use it, cause it wont login...
View 1 Replies View RelatedI just upgraded my laptop from fedora 10 to 12, in spite of all kinds of hassles I am nearly able to use the system. Except I noticed that whenever I connect to the ethernet via NetworkManager, both of firefox(3.5.6) and thunderbird(3.0) won't start a window and there is no error output. The programs just hang there so that I have to kill them explicitly. The strange thing is that if I just disconnect the network then they can start up without problem. I can then reconnect to the network and both of them work fine.
View 2 Replies View RelatedI have a Debian testing box with Xfce (no Gnome, no Nautilus). It has all gvfs-related stuff installed, including all backends and fuse interface. But any attempts to gvfs-mount anything (like sftp://... or smb://...) fail with error opening file: Operation not supported, and gigolo shows only 'unix device (file)' in the list of supported protocols.My ~/.gvfs has rwx permissions, and I'm a member of fuse group; other fuse-related stuff works for me.
View 1 Replies View RelatedI accidentally deleted my bin just after booting up when the bin application failed to start properly. I can still send items to trash (right clicking and select from drop down menu) but I cannot restore them, see the bin icon or drag items to the bin area. It is quite annoying and I would be very grateful for comprehensive instructions on how to restore the bin to full operational functionality.
View 2 Replies View RelatedJust did a clean 11.04 install, however, Ubuntu doesn't start properly, it usually stops when it gets to the purple screen, the screen with the word Ubuntu and a few red dots underneath it to show it is loading. The system usually stops there or stops before getting to that screen. I was able to start in the 'safe mode' though.
View 14 Replies View RelatedYesterday, I tried to get two monitors working by editing xorg.conf. When it failed, I tried using my old xorg.conf, but that didn't work either. dpkg-reconfigure xserver-xorg did not work (it literally did nothing). Uninstalling and re-installing xserver-xorg did not work.So now I have zero working monitors instead of two. Xorg.0.log says something about "Screen was found, but doesn't work with existing setup." Anyway, I am less concern with the specific problem I am having than with the general way to fix problems with X. I read somewhere that dpkg-reconfigure xserver-xorg doesn't work anymore, but I haven't figured out what I'm supposed to use in place of it when X won't start.
View 14 Replies View RelatedI have a 400mHz clear blue iMac here that I recieved from a friend. It was being used by an art center to display one letter as part of a sign. For some stupid reason, they put Debian on there for that. Whatever.I wanted to put some type of linux on it (not sure yet what kind) but since the Ubuntu Forums are awesome, I figured I'd use this resource instead of signing up for something new.
When I plug in the iMac and press the power button, it lights up with a green LED. Next, I hear the CRT screen power up. (with that nice satisfying crackle) followed by a loud, "Boop!" I do not see the screen light up, nor does it react to a keyboard, mouse, or monitor hooked up with the VGA on the back. It takes CDs in (which I found out) but does not give them back. (so rude.)
I have a problem with BT again, I installed blueman from SlackBuild at [URL], but when I start it (from Setting > Bluetooth Manager), it was running with a minimized window at the taskbar for a while and not appear any window or icon on the system tray.
I track its process, there's still it running background
Code:
tridc@latix:~$ ps aux | grep blueman
tridc 5394 0.0 0.4 26052 15708 ? S 15:54 0:00 /usr/bin/python /usr/bin/blueman-manager
tridc 16171 0.0 0.0 2204 628 pts/0 R+ 16:41 0:00 grep blueman
I'm trying to install ubuntu-10.04-server-i386 in Virtualbox on Windows XP Home (for use as a Drupal development server) using the instructions here [URL]... the Ubuntu server will not start properly. Instead it goes to an initramfs prompt as follows
[code]...
Another thread suggested typing 'exit' after a while but it just repeats the same output. It seems the root disk doesn't exist. I allowed the installer to set up partitions to its own recommendation (Guided?) although I'm not entirely sure what it did - I think there are two partitions but you guys will know that. The host disk is SATA. The CPU is a dualcore but I've only enabled one CPU on the guest within Virtualbox. Also, I had to enable PAE mode as without it Virtualbox crashed every time I started the guest. PAE wasn't mentioned in the instructions mentioned above. I've tried changing the various other disk parameters in Virtualbox (without fully understanding them) but no luck. I also ran run the boot info script from a desktop LiveCD and the results are given below.
[code]...
10.04, clean installs, running Gnome or LXDE.
IF
- a logged-on user wasn't properly logged off
- the system is restarted
- the same user attempts to log in
[Code].....
This seems repeatable, and happened on 2 different PCs.
When logged into Gnome as another user and trying to sudo a backup of the borked user's home before attempting a repair, a ".gvfs" file is reported "in use" and can't be copied.
It happened to me quite a few times, due to crash or more often power failure, or my sudo-errors. I now keep a few spare virgin sudo-enabled cloned accounts just in case one dies that way.
How to get compiz to auto-start. What seems to be the generally accepted method (from what a few google searches and the debian wiki tell me) of using gconf-editor and changing the window manager from 'gnome-wm' to 'compiz' in desktop > gnome > session > required_components doesn't change anything. The only method I found that did not involve using a terminal and running 'compiz --replace' every time I boot the computer was to add compiz and fusion-icon to the gnome startup apps, but this causes unwanted flickering (it starts metacity and then replaces it with compiz, ie it's simply automating what I would do with the terminal). Autostarting the fusion-icon alone does not start compiz, although it allows me to start it from it's menu if I right click the icon. Note that I sometimes use fluxbox as well, so starting it on boot isn't really an option either.
Perhaps this can be useful :
compiz:
Installed: 0.8.4-4
Candidate: 0.8.4-4
gnome-session:
Installed: 2.30.2-3
Candidate: 2.30.2-3
I am having problems with my newly upgraded 9.10 distribution that keeps locking up. I had started a thread on that but along the way, I noticed another problem with the Update manager. I posted the following text in the same thread but realized that I must start a newer thread since it has its own issues (so sorry if you see this text in my other thread).I had upgraded from 8.10 to 9.04 with ISO image and then to 9.10 with ISO image. In between, I did not reset anything in the Update manager (the upgrades were within one day of each other). Since the computer was connected to network during upgrades, I also let it fetch any newer packages as it needed them.
After the upgrade, I started having system lock ups and it requires hard boot. I tried to check for any updates using Update Manager. It reported that system was up-to-date. However, I noticed in the Settings that cdrom was selected in Sources (perhaps because I had upgraded with ISO image). I unselected the cdrom and tried to update the packages. Since I upgraded using ISO image, there is some problem here about recognizing the repository perhaps. Do you think my problem may have stemmed from upgrading twice using ISO images and not resetting the Update Manager in some fashion in between? Although the system did fetch upgraded packages during upgrades. How can I reset the update manager to start updating properly? Perhaps Authentication is an issue?Of course, I am still having trouble with lock up.
i have installed Fedora 15 from USB and it error
Quote:
GNOME 3 Failed to Load
Unfortunately GNOME 3 failed to start properly and started in the fallback mode.This most likely means your system (graphics hardware or driver) is not capable of delivering the full GNOME 3 experience.
.The interface is now Gnome 2. I have not change screen resolution 1280�720, now is 1024x768.
Result of xrandr -q
Quote:
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768
default connected 1024x768+0+0 0mm x 0mm
1024x768 0.0*
I am running into a problem with my xen installation. So far I have:
- installed 11.4 64bit
- installed hypervisor and tools (I created br0)
- boot into xen kernel
- run a zypper update
My current configuration is:
Linux linux-c7sq 2.6.37.6-0.7-xen #1 SMP 2011-07-21 02:17:24 +0200 x86_64 x86_64 x86_64 GNU/Linux
using patterns-openSUSE-xen_server-11.4-6.9.1.x86_64:
- bridge-utils-1.4-63.1.x86_64
- xen-doc-html-4.0.2_02-4.9.2.x86_64
- xen-doc-html-4.0.2_02-4.9.2.x86_64
code....
Does anyone have the same problem? There was nothing on google on this, and the xs_handle cannot be debugged as xs.so isn't visible to me.
i want to start apache and ktorrent on the systems start up, is there a program that will do it for me or do i need init scripts?
View 2 Replies View RelatedSuse 11.1 opera 10. When I shut down opera browser I assume it should shut down completely? Infact sometimes it does, but often it just goes to sleep (futex_wait). Any way to make it shutdown/kill itself every time ???
View 5 Replies View RelatedI'm using openSUSE 11.4 Tumbleweed with KDE 4.6. I started using emacs and I wound when I scroll, emacs gui does not refresh the screen properly, and the characters get messy.
Especially the first column (first chars in every lines) does not go away for a while when I scroll.
how can i restart properly X and kde?
Use case: I've update my system, with some X and kde. I don't want to restart, so i go to vt1, login as root, and type "init 3". X and kde shutted down. After i type "init 5" to get back everything.
But if i logout vt1, X and kde are also gone. I know that's normal, but i want to start X and kde as they start on boot. It's the same with a normal account and "startx" or "startkde"
I am a Java developer for a small company that develops web based solutions to our clients. My Linux skill levels are somewhere between newbie and experienced.The company I'm working for has hosted server that is self managed due to the nature of the software that we develop. The server is located in a data center and the host is fully responsible for maintaining the hardware.Recently the motherboard of the server failed and had to be replaced, this happened promptly, however when the server was booted up I was notified that our Linux is giving problems starting up.I was given access to the server via a Raritan lara (KVM-over-IP).
This enabled me to configure the network again.A few things I've noticed with this however. The old network interface was named eth0 while after the swap the new one is named eth1. There is a failure message for bringing up the NIC named eth0 (old non-existing one).Further after the re-configuring of the NIC (IP, subnet etc) I could connect to the server via SSH, our Apache was running without any visible issues (didn't notice anything in the Apache erroe log). The web frontend on JBoss was running good but I kept getting the failure to start eth0 message on startup. As well through the KVM device you never saw the login prompt, it just hangs on some point (once it was after saying httpd2 started up successfully and another after CRON).I have no idea of where to go look for this issue and I can't even say for sure that it's after the motherboard issue as I could use SSH without a problem after the NIC configuration as I used to connect to the server.I've further looked at dmseg but that also doesn't give any indication for me.
How can I set up multipath to two devices properly? I'm sure that I need to do something more then just: /etc/init.d/multipathd start
View 1 Replies View RelatedWhen I first boot my computer the Panel clock displays UTC time for about the first 2-3 minutes then switches to Local (UTC-5). My hardware (BIOS) is on UTC. Running KDE 4.3.1 on openSUSE 11.2 64 bit. I dual boot Mint 8 64 bit also and it starts correctly with local. Not the end of the world but I have never saw this behavior before.
View 1 Replies View RelatedI have iunstalled AA2.5 and found that after exiting it still resides in memory and blocks any sound in other applications until terminated via system monitor.There was no such behavior under Ubuntu. So my question is how to make it exit normally?
View 9 Replies View Relatedrandomly firefox (3.59) will not close properly, using the x button will remove it from my de, but it will keep running in the background, and i cant reopen it, receiving a message stating that another ff session is still running. i have to kill its pid id manually. not a big deal but... any idea? (11.2/kde4.3.5 release 0, x86_64)
View 9 Replies View RelatedI actually don't know what was the cause of this. Because of some display problems such as openSUSE freezes with external monitors, I have included xorg repository and updated relevant packages. A couple of days ago, suddenly my system started not refreshing the screen properly. For example, when I change a folder in Nautilus, the file pane is blank even though there are lots of files. The files appear when I move mouse cursor around or I activate some other window with alt-tab, and get back. Or in OpenOffice Witer, if I press arrow keys, there are lots of residual image of the cursor. So the screen is not properly refreshed right now.
View 5 Replies View RelatedI have a web application that I am trying to upgrade. Part of their upgrade process involves using a migration tool to transfer data from one version to another. This tool relies on cronjobs for it to function.According to them, the migration is not working because my cronjobs are not working properly.Is there a way to verify this?Below is what I had to paste in my crontab:MAILTO=webmaster@mymailhost.com* * * * * cd /srv/www/whiterhino/d7/periodic; /usr/bin/php -q cron.php
View 6 Replies View RelatedIve installed TS3 on SUSE 11.3, it recognizes microphone, but when I try to talk, it captures only noise with segments of words, not understandable at all.. When I try to capture sound by Sound Recorder, defaultly installed in gnome, it works and sound is clear. I tried to play with sound configuration in TS3(trying OSS, ALSA, PulseAudio), but no option helps, its just no input or that crippled not understandable input.
View 1 Replies View RelatedI just tried to install qtparted ver0.4.5 on my computer to help partitioning my HDs.After doing the "configure/make"-sequence (using unsermake, as required), I received following error during compilation:
"qp_libparted.cpp:1751: error: �ped_free� was not declared in scope",My parted version is 1.9.0-3.7.1 from openSuSE 11.2.My question:
1. Do you know, which other library might contain this "ped_free"-declaration?
2. Any other perted GUI, that might work better (gparted is only available on a live DVD after boot)
I have a strange keyboard problem. If I enable keyboard repeat from system settings, every key press gets repeated no matter how fast I press the key. For example if I try to type the letter 'a' I get 'aaaaaaaaaaa'. Or if I type 'mouse' I get 'mouseeeeeeeeeeee'. I've tried different delay and rate options but that doesn't change the problem. If I disable keyboard repeat I can type normally, but it's very annoying when you can't for example delete characters quickly.
View 5 Replies View Related