I have iunstalled AA2.5 and found that after exiting it still resides in memory and blocks any sound in other applications until terminated via system monitor.There was no such behavior under Ubuntu. So my question is how to make it exit normally?
View 9 RepliesWhenever i close LMMS, it's still running in the background until i kill the process. How can i get it to exit normally?
View 2 Replies View RelatedI have a Centos 5.5 server and I had a problem with its time because it was 1 one hour ahead of my local time. I installed and activated NTP and I created a link for /etc/localtime:
Code:
ln -sf /usr/share/zoneinfo/America/Mexico_City /etc/localtime
I reboot the server and waited for 1 hour but the time wasnt correct. The server's BIOS clock has UTC time so I edited /etc/sysconfig/clock file replacing:
Code:
UTC=false for
UTC=true
I reboot the server and waited for 1 hour but the time wasnt correct. After breaking my head for about 1 hour, I realized that there is a directory /usr/share/zoneinfo/Mexico and changed my link for /etc/localtime
Code:
ln -sf /usr/share/zoneinfo/Mexico/General /etc/localtime
And It worked. What is the difference between America/Mexico_City and Mexico/General files in /usr/share/timezones, they should be identical but of course they are not?
I noticed that if I have "exit" in a bash script file., e.g. script.sh,that when the word "exit" is reached, and the script file being executed is not in the PATH nvironment, i.e. ". script.sh", the whole konsole shell profile is exited! What gives here? Is there another command compatible to "exit" to prevent this, or will I just have the leave the "." part in the PATH enviroment, which is, to my understanding, is not recommended? I desire for a "goto" function in bash script files
View 11 Replies View RelatedIn linux, creating thread is same as process (clone()), except the virtual address space gets shared with the parent.If a running main process(thread) creates new thread, and if main thread exits, why should the new thread too exit? both are different entities, The same doesn't happen if the child thread exits, the parent thread would be alive.
View 1 Replies View RelatedI dub thee sakware: "Swiss army knife" ware Username is custom, password is blank Startupmanager must be chroot 'ed...
[Code]...
I installed 11.3 32 bit KDE on my system I had been running 11.0 32 for over a year.nVidia card, AMD quad, 4 gig RAM.Blender runs fine, fast and clean, when I exit, it takes a couple of seconds before I get control back.If I play a game, ArmagetronIOQuake, FrozenBubble - when I exit I get my mouse pointer back in a few seconds, you see a couple of the windows open on the desktop for a brief second but all goes black. When you move the mouse pointer around the screen it changes as if it is going over an icon or window but it does not recover.
View 1 Replies View RelatedI wonder if this is the right sub-forum I quite often play around with beta releases. Sometime the Screen freezes. (so what) However is there a key-stroke ctrl-?-? to get to a login prompt ????(rather then press the reboot button) ???
View 3 Replies View RelatedI downloaded "American army" game for Linux (armyops221-linux.run).....How do i install this program.
View 9 Replies View RelatedWhen i open project in code blocks and click build and run, it pop out debug report and exit after that
View 3 Replies View RelatedI am running into a problem with my xen installation. So far I have:
- installed 11.4 64bit
- installed hypervisor and tools (I created br0)
- boot into xen kernel
- run a zypper update
My current configuration is:
Linux linux-c7sq 2.6.37.6-0.7-xen #1 SMP 2011-07-21 02:17:24 +0200 x86_64 x86_64 x86_64 GNU/Linux
using patterns-openSUSE-xen_server-11.4-6.9.1.x86_64:
- bridge-utils-1.4-63.1.x86_64
- xen-doc-html-4.0.2_02-4.9.2.x86_64
- xen-doc-html-4.0.2_02-4.9.2.x86_64
code....
Does anyone have the same problem? There was nothing on google on this, and the xs_handle cannot be debugged as xs.so isn't visible to me.
It seems I cannot mount and unmount a USB Drive, it gives me the following error:
Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/DAVE-1
I have changed FSTAB, and now it looks like this:
proc/procprocdefaults00
sysfs/syssysfsnoauto00
usbfs /proc/bus/usb usbfs auto,user 00
devpts/dev/ptsdevptsmode=0620,gid=500
code....
I have been using SDB:NVIDIA_the_hard_way and have run into a problem. When I run the script, it gives me the following error message: You appear to be running an X server; please exit X before installing
View 7 Replies View RelatedI'm having an issue when I'm trying to install SuSE linux onto my desktop.I go through all the steps and everything looks okay, but when it starts to install the packages, I get an error message that basically says:kernel.desktop - unable to install, exit status 127.I have a ATI X1950 video card in the computer, as well as a AMD 64 FX CPU in the system.
View 7 Replies View RelatedI am relatively new at Linux and am having some problems with an install of openSUSE 11.2. I installed 11.2 on my Thinkpad X31 dual boot with WinXP. It seems to work very well except the network. I looked up swerdna's instructions on setting network cards up. I used YaST to try and set the system up as described in swerdna's instructions. Everything looks fine my network card and wireless card show up in the overview settings screen and everything sets up fine. But when I exit YaST the network doest show up no icon in the system tray and it doesn't even try to connect.
I did go into hardware to see if it was identifying my hardware and my network card shows up as "Thinkpad R40" and the wireless shows up as Cisco Aironet Wireless 802.11b. As far as I know this is correct. I have tried three other distro's and this one has gotten the closest to working so far.
Suse 11.1 opera 10. When I shut down opera browser I assume it should shut down completely? Infact sometimes it does, but often it just goes to sleep (futex_wait). Any way to make it shutdown/kill itself every time ???
View 5 Replies View RelatedI just installed GroupWise 8.0.2 and I want to use it as a pop (and if possible) exchange client. It's been a while but I remember that if you don't want to use a GroupWise server you just needed to select 'Caching Mailbox Path' and give it an existing path. If I do that now it just keeps asking for the hostname of the GroupWise server.
Is this a bug or is this feature disabled?
I am running OpenSUSE 11.3 64-bit gnome
I'm using openSUSE 11.4 Tumbleweed with KDE 4.6. I started using emacs and I wound when I scroll, emacs gui does not refresh the screen properly, and the characters get messy.
Especially the first column (first chars in every lines) does not go away for a while when I scroll.
how can i restart properly X and kde?
Use case: I've update my system, with some X and kde. I don't want to restart, so i go to vt1, login as root, and type "init 3". X and kde shutted down. After i type "init 5" to get back everything.
But if i logout vt1, X and kde are also gone. I know that's normal, but i want to start X and kde as they start on boot. It's the same with a normal account and "startx" or "startkde"
I am a Java developer for a small company that develops web based solutions to our clients. My Linux skill levels are somewhere between newbie and experienced.The company I'm working for has hosted server that is self managed due to the nature of the software that we develop. The server is located in a data center and the host is fully responsible for maintaining the hardware.Recently the motherboard of the server failed and had to be replaced, this happened promptly, however when the server was booted up I was notified that our Linux is giving problems starting up.I was given access to the server via a Raritan lara (KVM-over-IP).
This enabled me to configure the network again.A few things I've noticed with this however. The old network interface was named eth0 while after the swap the new one is named eth1. There is a failure message for bringing up the NIC named eth0 (old non-existing one).Further after the re-configuring of the NIC (IP, subnet etc) I could connect to the server via SSH, our Apache was running without any visible issues (didn't notice anything in the Apache erroe log). The web frontend on JBoss was running good but I kept getting the failure to start eth0 message on startup. As well through the KVM device you never saw the login prompt, it just hangs on some point (once it was after saying httpd2 started up successfully and another after CRON).I have no idea of where to go look for this issue and I can't even say for sure that it's after the motherboard issue as I could use SSH without a problem after the NIC configuration as I used to connect to the server.I've further looked at dmseg but that also doesn't give any indication for me.
How can I set up multipath to two devices properly? I'm sure that I need to do something more then just: /etc/init.d/multipathd start
View 1 Replies View RelatedWhen I first boot my computer the Panel clock displays UTC time for about the first 2-3 minutes then switches to Local (UTC-5). My hardware (BIOS) is on UTC. Running KDE 4.3.1 on openSUSE 11.2 64 bit. I dual boot Mint 8 64 bit also and it starts correctly with local. Not the end of the world but I have never saw this behavior before.
View 1 Replies View Relatedrandomly firefox (3.59) will not close properly, using the x button will remove it from my de, but it will keep running in the background, and i cant reopen it, receiving a message stating that another ff session is still running. i have to kill its pid id manually. not a big deal but... any idea? (11.2/kde4.3.5 release 0, x86_64)
View 9 Replies View RelatedI actually don't know what was the cause of this. Because of some display problems such as openSUSE freezes with external monitors, I have included xorg repository and updated relevant packages. A couple of days ago, suddenly my system started not refreshing the screen properly. For example, when I change a folder in Nautilus, the file pane is blank even though there are lots of files. The files appear when I move mouse cursor around or I activate some other window with alt-tab, and get back. Or in OpenOffice Witer, if I press arrow keys, there are lots of residual image of the cursor. So the screen is not properly refreshed right now.
View 5 Replies View RelatedI have a web application that I am trying to upgrade. Part of their upgrade process involves using a migration tool to transfer data from one version to another. This tool relies on cronjobs for it to function.According to them, the migration is not working because my cronjobs are not working properly.Is there a way to verify this?Below is what I had to paste in my crontab:MAILTO=webmaster@mymailhost.com* * * * * cd /srv/www/whiterhino/d7/periodic; /usr/bin/php -q cron.php
View 6 Replies View RelatedIve installed TS3 on SUSE 11.3, it recognizes microphone, but when I try to talk, it captures only noise with segments of words, not understandable at all.. When I try to capture sound by Sound Recorder, defaultly installed in gnome, it works and sound is clear. I tried to play with sound configuration in TS3(trying OSS, ALSA, PulseAudio), but no option helps, its just no input or that crippled not understandable input.
View 1 Replies View RelatedI just tried to install qtparted ver0.4.5 on my computer to help partitioning my HDs.After doing the "configure/make"-sequence (using unsermake, as required), I received following error during compilation:
"qp_libparted.cpp:1751: error: �ped_free� was not declared in scope",My parted version is 1.9.0-3.7.1 from openSuSE 11.2.My question:
1. Do you know, which other library might contain this "ped_free"-declaration?
2. Any other perted GUI, that might work better (gparted is only available on a live DVD after boot)
I have a strange keyboard problem. If I enable keyboard repeat from system settings, every key press gets repeated no matter how fast I press the key. For example if I try to type the letter 'a' I get 'aaaaaaaaaaa'. Or if I type 'mouse' I get 'mouseeeeeeeeeeee'. I've tried different delay and rate options but that doesn't change the problem. If I disable keyboard repeat I can type normally, but it's very annoying when you can't for example delete characters quickly.
View 5 Replies View RelatedI am trying to uninstall/reinstall banshee. It is not playing nice with my setting sine yesterday.I can't even change the login name of my last.fm account within banshee anywhere.Everytime I uninstall/reinstall it, banshee just continues to reuse my non-working settings.
View 3 Replies View Relatedi got everything working on my laptop, i just can't set up my network sharing..
I have a desktop pc running Windows 7, and this laptop running openSuse 11.1!
I use Gnome by the way... When i get to Network in Nautilus, i double click on Windows Network -> Workgroup -> Windows7PC, but at that point i don't see any folders or anything..
This is my smb.conf file:
Code:
# smb.conf is the main Samba configuration file. You find a full commented
# version at /usr/share/doc/packages/samba/examples/smb.conf.SUSE if the
# samba-doc package is installed.
# Date: 2008-12-03
[Code].....
In firewall i added Samba in broadcast, followed some tutorial on the net..