Fedora Networking :: Can't Share A Folder On Samba Network?
Jul 12, 2011
In this post I will give a quick solution for a possible problem with sharing a folder in Fedora 15.I had to spend some time for research and frustration so, hopefully this post will save you from both. If you have Samba installed and configured to share certain folders on your Fedora machine for a Windows network but, they can't be accessed then following might solve the problem:
1. Go to Applications, Other and run FIREWALL
a). go to TRUSTED SERVICES and check SAMBA and SAMBA CLIENT that are located in the list of services
b). click APPLY
c). go to ICMP FILTER and check ECHO REPLY (PONG) and ECHO REQUEST (PING)
c). click APPLY
[Code]...
If your Samba is configured correctly, your shared folder should be available on your Windows network.A little hint: if you don't want other users to use passwords for accessing your shared folder, select SHARE as an Authentication Mode in Samba GUI Configuration Tool, Preferences, Server Settings, Security
View 3 Replies
ADVERTISEMENT
May 5, 2010
I am used to Ubuntus simple sharing with samba. Just install it, reboot and then share the files.Then do I klick on network folder and see all the shared files on the computers in the network.
How do I install it so I only need to go into network folder and see the other computers shared files.Then, how do I share files?
I hope it's not so difficult and that I have to change i config-files.
I am new to Fedora.
View 4 Replies
View Related
Mar 1, 2009
I have a fedora 10 box with two network card on eth0 I have a pppoe connection to the internet, on second card eth1 I share my internet connection end I set up a samba server but I don't know if the settings are good. How to do this settings right to work fine, the ip are assigned by dhcp I don't use any static ip .When I try to browse the internet from the other computers some site's like {.com ; .org ; .info} are block, other site from {.ro} are working. Someone tell me something about turn off all my filters, but I don't know where to find this filter to turn it off. And when I use samba I can't have and internet access or vice versa. My network look like that:
Code:
eth0
|<--pppoe connection
|
MyComputer
(fedora 10)
|
eth1
|
switch
|
comp.1 comp.2
Win OS MacOS
View 2 Replies
View Related
Jan 12, 2011
I am getting this error when I try to share a folder through samba.
Error 255 cannot convert name "Everyone" to a SID
I do not have a file /etc/init.d/samba Has this been replaced by /etc/init.d/smbd ?
Also, I have a /var/lib/samba/usershares folder but it is empty. Is there supposed to be something inside?
View 4 Replies
View Related
Sep 4, 2010
I can't share my /var/www folder on this machine - it worked fine on my Desktop, it just asked me to install the samba windows something.
What's going wrong with this.
Here is the error I get after right clicking and going to sharing and trying to share the folder...
Code:
View 5 Replies
View Related
Apr 24, 2011
I'm having some trouble mounting a Samba share on my two Ubuntu machines. The Samba share is setup so that all files are readable and writable by everyone (it's only accessible via the local network). When I create a new folder on the share with either of my Ubuntu machines, the folder becomes non-writable by anyone ie. I can't place anything into the folder. I'm using the following command to mount the share:
[Code].....
I think the problem is with the way I'm mounting the share on my Ubuntu machines. If I go to the share using smb://192.168.1.160 in a file browser, I can create new folders which are readable and writable by everyone. But, if I create the new folder where it's mounted at /mnt/backup, no-one can modify or change it.
View 2 Replies
View Related
Sep 24, 2010
I have been having off and on issues with my samba file shares. I am sharing a NTFS formated hard drive where the mount point is in my home directory, as well as a printer connected via USB. I am to the point where printing works (using it as an ipp print share, samba is configured for it, but I don't know if it works or not), and I can access the shared folder from Windows, but I can't access the shared folder from any Ubuntu machine. I get the error:
[Code]....
View 5 Replies
View Related
Oct 8, 2010
I have 2 Ubuntu machines: a desktop in my bedroom, and a laptop.
I have my music shared on my desktop machine, and can access it through the network menu item in the nautilus manager, but I want the files from the share to be mounted on the disk so I can access it through the commandline.
If I right-click the shared folder in Nautilus, it says its location is smb://rob/music
If I do:
mount -t smbfs //rob/music /mnt/music, it tells me that it cant locate rob.
So I try "ping rob" and that doesn't work.
I can't make a hosts entry for rob which happens at this moment to be 192.168.0.8, because my router assigns different IP addresses to various machines at different times, and I cant seem to find a way to make static maps from MAC address to ip address.
So, how come nautilus can see my samba share on the machine "rob", but the mount commands cannot?
View 7 Replies
View Related
Sep 1, 2010
I've used Samba for several years and when it works it's great. Unfortunately from time to time it seems to get messed up and either all the 7 machines on my home network can't be seen or I can't access the shares on some. I have 2 Windows XP computers 4 Kubuntu and one Linux Mint KDE, all the latest versions. I'd rather not plough through all the documentation for Samba, but would really like a "model" smb.conf with a few comments about parts that might have legitimate variants. I have researched this with Google searches many times but have failed to find the information I need in concise form.
View 4 Replies
View Related
Feb 24, 2009
I'm trying to setup a Samba network share with a Fedora Directory Server backend. This will be used primarily for Windows users to authenticate before accessing the share. I am using Fedora Core 10 and have all of the latest updates installed. When I try to connect from a Windows machine, I am prompted for a username and password. I enter the username and password of the account I created in Fedora Directory Server in OU=People. The credentials are rejected. At the same time in the log file I see this:
[2009/02/24 16:50:16, 3] auth/auth_sam.c:check_sam_security(282)
check_sam_security: Couldn't find user 'Administrator' in passdb.
[2009/02/24 16:50:16, 2] auth/auth.c:check_ntlm_password(318)
check_ntlm_password: Authentication for user [Administrator] -> [Administrator] FAILED with error NT_STATUS_NO_SUCH_USER
Administrator is the user I created in Fedora Directory Server. If I perform an ldapsearch it will find the user as uid: Administrator so I know it is able to be looked up in FDS. But I'm guessing that's not the problem.
[Code]...
View 4 Replies
View Related
Mar 22, 2010
i have an old desktop that i have decided to use as a central point for localhost/website files. I have 2 laptops, a ubuntu and vista, and i want them both to be able to see the public_html folder on my desktop, and be able to create/update folders and files.
I have set up the samba sharing and that's working fine, but when i create folders using my laptop, they are not writeable to the desktop or other laptop because my laptop is the creator. Is there a way that I can set it so that whenever folders/files are created from either laptop, they have full permissions?
View 2 Replies
View Related
Feb 25, 2010
i did install and configure samba buy google tutorials. I can ping the centos box from windows but cannt access folder which is on centos. I can ping the machine.
View 9 Replies
View Related
Jul 17, 2010
I want to use samba for file sharing like on a Windows home network. Actually they are all Linux machines but nfs is too complicated. On my host machine I installed samba and system-config-samba. I created a new share for /home, check marked writable and visible and put access to everybody. For preferences-->server settings--> security the "authentication mode" is set to user, encrypt passwords is no, and guest account is no guest account. Under preferences-->samba users I added myself as a user with the same windows user name as my Linux user name and the same password.
My client is a virtualbox fedora (used for testing purposes but actual clients will be real computers on my home network). I entered the address smb://192.168.1.184. When asked for the user name and password I put my regular user name and password since that was what I set in samba users. However, the password dialog keeps coming up and won't let met into my own computer. If I quit it says something like access is denied. How can I get my home network back? I liked this feature when my home computers ran XP but I switched them to Fedora 12.
View 2 Replies
View Related
Jan 23, 2011
I am having the following problems with samba.
1. I cant share a folder on an external USB drive. (I have no problem doing so in UBUNTU)
2. I cannot seem to get Samba Swat to work.
I've Tried 127.0.0.1:901
my ip address:901
severname:901
I made sure that xinet was installed and started as well as smb and nmb. I can access other shares on the server just cant get samba swat to work nor can I set up a share on an External USB. I can access it from my side but not my Wifes side. I even made the root of the drive a share like so:
in smb.conf
[FreeAgent Drive]
comment=Shared Server Drive
path= /media/FreeAgent Drive
read only = no
browseable = yes
create mask = 0777
directory mask = 0777
valid users = argedion, perky
what am i missing or doing wrong? I have a simular set up on a server running UBUNTU 10.10 and it is sharing paths from a USB external. (note: I did not have to share the root of the drive in ubuntu.)
I know that Fedora is not UBUNTU nor GOD willing will it ever be. forgot to mention that firewall is off and i cannot access it even as root
View 14 Replies
View Related
Mar 15, 2011
I would like to share a folder from a Linux Guest with a Windows host (with read and write access if possible) in VirtualBox. I read in these two links: here and here that it's possible to do this using Samba, but I am a little bit lost and need more information on how to proceed.
So far, I managed to set up two network adapters (one NAT and one host-only) and to install Samba on the Linux guest, but I have the following questions now: What do I need to type in samba.conf to share a folder from the Linux guest? (the tutorial provided in one of the links above only explains how to share home directories) Are there any Samba commands that I need to run on the guest to enable sharing? How do I make sure that these folders are only available to the host OS and not on the Internet? Once the Linux guest is setup, how do I access each of the individual shared folders from the Windows host? I read that I need to mount a drive on Windows to do this, but do I use Samba logins, or Linux logins, also do I use localhost? or do I need to set up an IP for this?
View 1 Replies
View Related
Sep 7, 2011
I'm working on sharing a user's home folder using the username and password of the user's lLnux account. I noticed that home folder sharing is quite easy as I just need to change the smb.conf file to enable it. However I can't seem to login anyway. It seems that Samba keeps its own records of username and passwords. Is there a way that I can map/sync the Linux users' usernames and passwords automatically to Samba? The end result should be that whenever I add a new user or a user changes his/her Linux login password,Samba automatically changes its password as well.
View 1 Replies
View Related
Feb 19, 2010
I've installed Ubuntu Server 7.10 Gutsy and Webmin 1.500 on it. The thing that I want to do is: I want to share a folder an sub folders for windows users ( guest user) I should modify those folders from my ubuntu desktop 9.10 karmic they are all same folders. Is it possible? if yes how can i make it. you can tell from webmin or samba configuration file.
View 8 Replies
View Related
Feb 5, 2011
We have 10.x ubuntu server with XP clients. We have samba share folders at LAN. Is there any possibility that we can disable copy and paste option for some specific folders, while other data folders remain as usual in our shared data?
View 4 Replies
View Related
Jun 13, 2011
I would like to know how to share a folder in samba with no need of password for individual user without using guest
View 5 Replies
View Related
Dec 23, 2010
The scenario like this. I'm working on Ubuntu 10.10. I've enable samba sharing with full guest access enable. In my office I had another server (CentOS 5.5) installed just for me and I've created a Apache VirtualHost which root document pointed to share folder on my comp
This is my fstab setting
//my ubuntu computer name/sharing/www /media/www cifs context=system_ubject_r:httpd_sys_content_t:s0,username=username,password=******,iocharset=utf8,fi le_mode=0777,dir_mode=0777 0 0
After label the mount folder as httpd_sys_content_t the Apache web server working in correct way (duno much but at least it can index files and excute some php code so) then the troll come in : if some file was created by my ubuntu (personal comp) then the file would be listed in Apache virtualhost correctly.
But if I'm ssh to CentOS server goto /media/www which was mounted to my unbuntu computer. Then type command like $mkdir something Suprising that folder ./something could not be accessed by Apache anymore except I remount by umount and mount it again or "setenforce 0" What is wrong with my system can anyone point me out of this headache
View 1 Replies
View Related
Jun 13, 2011
I would like to know how can I share a folder in samba with no need of user and password with write permission, with no need of using guest user.
View 3 Replies
View Related
Aug 31, 2010
On one of my Samba shares on my server I have a folder of mp3 files of my CDs. The one I am having an issue with is "Clarence Carter/Dr. C.C." (yes, the one with the ULTIMATE party song). The "Dr. C.C." folder name is normal locally on the server, but across Samba it comes out "DMOU3A~H". It's definitely Samba doing it, because I get the same result whether accessing the share from Linux or Windoze. I can still access the folder this way, but it would be nice to not have Samba mangle the folder name this way. I am using Samba 3.4.2 on an Athlon64 X2 system running Slackware64.
View 1 Replies
View Related
Aug 16, 2011
Maybe the most stupid question you guys ever heard, but i do not find the solution.Now that i have acces on the netbook i would like to share a folder on my desktopcomputer so i can acces it with the netbook when im in the bedroom.(moviefolder)But how do i share a folder in Fedora 15?
Username and password are the same on desktopcomputer and netbook.
desktop computer is named koen-pc
netbook is named koen-net
View 7 Replies
View Related
Jun 18, 2011
Was trying out Fedora 15 but could figure out something: How do I share a folder?
When doing some Googling all I could find were forum posts on how to manually configure samba with smb.conf (a place I refuse to go, its 2011 people), and gnome-user-share which only shares ~/Public and doesn't show up on my Windows computer.
I do know that at least in Ubuntu 10.10 with Gnome 2 all I had to do was right click on a folder at click Sharing. I'm looking for similar ease of use in Fedora.
View 1 Replies
View Related
Nov 7, 2009
I know this might seem stupid, but I can't seem to connect my 2 PCs to share a folder (directory)
The both have Fedora 11 and they are connected through a Linksys WRT54G (one on LAN and the other on WiFi)
View 6 Replies
View Related
Mar 3, 2010
F12 / Gnome 2.28.2 I'm just trying to share the /home/Public folder with my Mandriva laptop. The "manual" on Gnome's website doesn't give much info, other than clicking the option to share the folder and deciding whether to use a password or not. There has to be more to it, otherwise it'd work.
All I'm looking to do is copy files to and from the folder on the desktop machine from the laptop..
View 1 Replies
View Related
Apr 26, 2011
Start>Run>\192.168.0.1storage gives me "The specified network password is not correct." It lists my domain as "ANTEC" which is the name of my computer, though I've changed the workgroup to WELLS. I've run:
setsebool -P samba_domain_controller on
Trying to connect to samba locally gives me this:
Code:
[tedward@hp-firegate ~]$ smbclient //192.168.0.1/storage -Utedafur
Password:
session setup failed: NT_STATUS_LOGON_FAILURE
[code]....
View 6 Replies
View Related
Nov 16, 2010
I had share my folder through network with other PC,now i want to Rivert(un-share) this,how can i..?
I had right-click on that folder but i didn't get any option for that....it's my first time of sharing data via samba..
View 4 Replies
View Related
Jul 31, 2011
I'm probably missing something really simple here...
In Ubuntu, with Nautilus, there is an easy GUI method of making folder to be shared and visible over the network.
I can't seem to find the means of doing this in Xubuntu, either in Thunar or Gigolo.
I can use either of these to browse folders on other networked machines I have shared using Nautilus.
I had Nautilus for a while on my XFCE machine and used that to share some folders, but I removed it as it was conflicting with Thunar at times.
View 4 Replies
View Related
Oct 10, 2010
System: openSUSE 11.3, Gnome
In the Windows network, there are 2 or more shares as follows:
I can access both shares in nautilus e.g. "smb://bla.bla.company.com/share $". The shares are mounted then in "home/user/.gvfs/". ok.
In one of shares, is a file-based repo, which I can access easily with svn.
Unfortunately when I try to checkout any normal folder from a share (as in MS$ with Tortoise), I fail...
What's more in the file-based repo, external references exist to other shares in the network, the name is as "file:///X:/folder/file.txt". SVN gives error messages about such references and does not access files (where "X:/" is also mounted, but as a "test$ to smb://bla.bla.company.com/test$" in "home/user/.gvfs/ ").
My questions:
- what is the best solution to mount shares, so I can access all the SVN repos?
- How can I access normal files and folders from a share with svn?
- How can the problem with external file references in a file-based SVN repo can be solved? without to checkout/commit files "manually"...
- Some checkouted scripts (Perl, etc.) use libs from shares:
"Use lib qw(r:/tools/perl/lib/). how to get around this as well?
- How can I change mount-names: "test$ on smb://bla.bla.company.com/test$" to something like "share-test$?
- How can I change the mount location? in "home/user/SAMBA/" instead of "/home/user/.gvfs/"..
I had tried to use "fuse-smb": installed, created config, but when I run "fusesmb /home/user/SHARES/", i get an error message: smb.conf is missing.. Where can I get this config?
And one last question: Can someone recommend me a svn-gui? i have tried tried rabbitcvs, esvn and some others .. but all either do not work or crash.
I'm not sure, but maybe I can use svn and tortoise in wine, and checkout/commit the necessary files from/to "home/user/project/"? there raises the questions whether it is possible to install tortoise in wine and how to mount the shares on the wine? How to manage the hard-coded lib-names in some scripts...
View 1 Replies
View Related
