General :: Unable To Mount Windows Share To SUSE 11.3
Aug 13, 2010
I'm pretty new to using Linux and I installed SUSE 11.3 on Sun Virtual Box to play around with it. I am trying to mount one of my Windows shares to my SUSE system and I'm getting an error "Mount error(13): Permission denied". I have made sure my Windows permissions are open, in fact I used a test share and added everyone and gave full control. Below is the command I tried to use to mount it.
mount -t cifs -o username=Nick //computername/share /mnt/temp
I pre-created the temp folder under mnt and I tried both my PC name and my ip address in the above command with the same error each time. I also tried using my pc name in my username string as well "username=pcname/Nick" and that did not work either. Can someone advise me why this error is occuring?
Kernel version: 2.6.34-12
Thanks,
Nick
View 1 Replies
ADVERTISEMENT
Jan 22, 2011
I have installed ubuntu 10.10 and the Samba addon to configure my shares to my Windows terminals.This is what I got
Firewall off (utf disabled)
Internal Sata /dev/sda1 (EXT4 FS)
External USB HDD /dev/sdb1 mounted at /media/SG1500GB (EXT4 FS)
I have two shares
1. //home/test - Which I can see and access with no problems (can't write to it though even though I set the share as writable?, but, I can read from it). This is available to everyone. My windows terminal can see this folder and access it. This is on my main 80GB internal drive /dev/sda1.
2. //media/SG1500GB/Music. I set this up for everyone full access and I can see it at all my Windows machines but,I can't get into the folder. Windows keeps giving me an error stating network path not found.I also try to access it via the Nautilus (Places/Network/system/music) and get an error message "unable to mount location, Failed to mount windows share". This drive is mounted per the disk utility.
View 4 Replies
View Related
Sep 5, 2010
I have recently set up an ubuntu installation on an old PC. After some fiddling with both it, and the windows 7 machine, I have managed to share all of my drives. However, when attempting to access them from ubuntu, only 2 of the 4 hard disk shares will mount, with the other 2 failing with a Unable to mount location, failed to mount windows share error message.
View 2 Replies
View Related
Aug 22, 2010
I am trying to mount a shared drive on a Windows Server 2008 machine using a Linux machine (Fedora 13). I try mounting by
# mount //HOSTNAME/SHARENAME /mnt/FOLDER
and I get mount error(13): Permission denied.
I have tried other options like # mount -t nfs //HOSTNAME/SHARENAME /mnt/FOLDER -o username=USERNAME and the same thing with different filesystem types (ntfs, smbfs, cifs).
I have:
checked all firewall configurations.
verified security/sharing settings
for the drive
verified registry keys under HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesNfsSvrParameters
verified NFS server is running
I am familiar with Windows Server 2008 but I have never configured a system from scratch on my own. The computer I'm using used to have Windows 7 for sharing folders to a Linux server. I have just switched to Server 2008 and have not been able to mount anymore.
One thing that I think is that I tried setting up an identity mapping solution; however, I do not have a domain controller setup. I am still functioning on a workgroup.
View 1 Replies
View Related
Mar 27, 2011
im trying to get a network setup i followed the instruction via gentoo wiki samba what i have done
[Code]...
then i did chmod 777 to the shared folders on both machines went into nautilus it sees the folder but it will not mount the folder showing the error msg:"unable to mount location failed to mount windows share" ive been searching unbuntu forums opensuseforums and google for an answer to this issue but as of right now anything that i have tried to do has failed and nothing seems to be working.
View 12 Replies
View Related
Jul 26, 2010
I have a Dell Inspiron 1720 running Ubuntu v10.04 with a wireless card.My desktop is a Dell Optiflex running WinXP.The desktop is connected via ethernet cable to a Linksys wireless router. Certain folders on the desktop are set for sharing. Up until early last week I was able to access the desktop folders from the laptop with no issues.Suddenly I am now getting this error "Unable to mount location Failed to mount Windows share" whenever I try to access the desktop folders from the laptop.I suspect an upgrade is the culprit, but not sure.
View 3 Replies
View Related
Mar 21, 2010
i'm trying to connect to the three other machines in my house but am having quite a hard time doing so. i've never had a problem in the past with ubuntu, but, with 9.1 and windows 7, things have gotten a bit harder. i'm running 9.1 and my roommates are running windows 7. i've installed, set up and configured samba and i can see the computers on my network, but any time i try to access either of the drives, it says unable to mount location: failed to mount windows share.
View 4 Replies
View Related
May 25, 2010
I have been trying to share folders from my main PC which is running Ubuntu 10.04. I have been able to figure out Samba enough to get my a couple of folders shared, but I have been unable to share any folders which are on my external harddrive. After entering the path in my smb.conf file they appear on the network but I am unable to navigate to them. When trying to navigate to them through the network folder on the pc they are actually connected to I get an "Unable to mount location: Failed to mount windows share" dialog box. On the windows pc I am trying to share with I get, "Windows cannot acces \Josh-Desktop
ame of folder"
My smb.conf file looks like this:
That folders I cannot access are Music and Videos.
View 9 Replies
View Related
Jun 28, 2011
I have a computer running Ubuntu 10.10. I am using it to share many hard drives connected to it. I am using Samba. I have successfully shared many folders to one Windows user. I am attempting to share other folders within the shared folders to another user as read only but have not had any success. When I attempt to connect to one of the shares from another computer running Ubuntu 10.10, logged into an Administrator account with the same username and password which I setup on the Samba share I get the error: "Unable to mount location" "Failed to mount Windows share"
View 3 Replies
View Related
Jul 5, 2009
OK... I tried everything i could think of... but i still cannot get my Open SUSE 11.1 to mount my samba share at boot! I still don't understand the 11.1 boot sequence. can NE one help me... tell me what files to give you output from... Ty guys P.S. My shares originate from a Windows Server 2003 RC2 machine, and it's dns server doesn't work correctly... so my mount command is
mount -t //192.168.x.x/files/ /nET/ -o username=linux,password=xxxxxx
please let me know what other info you need... I don't have the internet, so it will be tommorow b4 i see this again!!! Thanks
View 2 Replies
View Related
Jun 11, 2010
I have shared few directories through nfs in my fedora 12 OS.Here is the output of few commands from the virtual machine running on CentOS in both normal and rescue mode
Code:
[root@localhost /]# showmount -e 192.168.0.3
Export list for 192.168.0.3:
[code]...
View 2 Replies
View Related
Apr 14, 2010
Today when I try to mount a samba drive on my Ubuntu 10.04 server, which worked before, I now get the error message below:
DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)
Any ideas is much appreciate.
View 1 Replies
View Related
Jan 24, 2011
I bought SuSE 8.0 professional a long time ago, while living in Germany. I have an old German laptop that currently has Win2K installed, and I would now like to replace Windows with Linux on it. The computer boots the initial CD fine and gives me a number of installation choices. If I do not add a "root=/dev/hda1" to the parameters it stops the installation with a "Kernel panic: VFS: Unable to mount root fs on 08:01" and if that line is there the error message changes to 03:01.
Is this because the hard drive is already formatted to NTFS? Is there a way to delete the partition and create a new one from the Linux installation disks?
View 9 Replies
View Related
Jun 23, 2010
Attempts to do a mount -t nfs4 servername:/share /mnt hang. Performing an strace of the mount shows that the mount command is attempting to find /sbin/mount.nfs4 The nfs server, client, and util packages are installled. Did ps -ef | grep idmapd; ps -ef | grep gssd to check client side daemons and things look good. Not using gssd right now tho. Just want to get the thing to mount. Firewalls are not running. Doing a showmount -e servername reports the shares as being offered. I can mount it using nfs v3 protocol.
View 8 Replies
View Related
Jan 15, 2009
I'd like to find a way to mount a windows file share securely (encrypted) as I'll be communicating over the Internet.
View 4 Replies
View Related
Aug 20, 2009
Using SUSE 11 with Gnome. I mounted a CIFS share from a Windows server as /mnt/win. With the file browser, I can browse to file system/mnt/win and then the files and folders of the Windows share come up fine and I can open them. When I use the file browser to browse to network, the server hosting this share is listed. Then I browse to that server and it lists no shares (nothing at all). I can't go any further than the server. Is there a separate authentication necessary for the file browser to see this share from the network place?
View 2 Replies
View Related
May 13, 2010
I wanted to enable file sharing in for one of my folders under the home directory. I noticed that the 'not shared' and 'shared' always defaulted back to 'not shared'. And now I see what looks like an electrical plug icon symbol over the folder icon symbol like I might see used for some of the root folders. What does the new icon indicate about the folder attributes and why does file sharing default to 'not shared'?
View 1 Replies
View Related
Jan 11, 2010
I have a windows machine (in a domain) and I have created 2 Virtual Machines with Suse 11.2 installed on them.Now, I want to share a folder in windows to both Suse images. I am succesfully able to do that.I used: mount -t cifs -o user..... command to mount it at /mnt/win on my linux and succesfully able to work with it.
Now, I want a user in my Linux box (both Linux images)to be able to write to the shared folder in windows (actually both linux images will write to the shared folder but it is based on acquairing locks and releasing them to be able to use the shared folder on windows).
I tried etc fstab and lot other options but my efforts were in vain.Simply put - I need a user in my linux box (suse 11.2) to be able to write to a windows shared folder.
View 2 Replies
View Related
Dec 10, 2010
My server info:
SUSE 11.3 , authenticated against LDAP, I am able to log in using LDAP credentials.
I did run smbpasswd -w password
After I configured the smb.conf file, I try to do this on the Terminal to make sure it will work in Windows machines but I got this error:
user@mybox:~> smbclient -L mybox.mydomain.com
Enter user's password: (I enter the user password here)
Connection to mybox.mydomain.com failed (Error NT_STATUS_CONNECTION_REFUSED)
so I went to /var/log/samba.log to check the error file, I got this :
Connection to LDAP server failed for the 1 try!
[2010/12/10 18:08:50.919813, 1] lib/smbldap.c:1330(another_ldap_try)
Connection to LDAP server failed for the 2 try!
[2010/12/10 18:08:52.133624, 1] lib/smbldap.c:1330(another_ldap_try)
Connection to LDAP server failed for the 3 try!
and it kept going on and on until I stop it.
Here is my smb.conf file, please take a look to see what I've done wrong here. I tried to to take out WORKGROUP in GLOBAL but there were error like " Work group name x.x.x.com is too long, so I put in WORKGROUP = etc.
[global]
workgroup = mybox
passdb backend = ldapsam:ldap://ldap.my domain.com:11389/
ldap suffix = dc=my domain,dc=com
name resolve order = wins bcast hosts
ldap machine suffix = ou=Computers
ldap user suffix = ou=People
ldap group suffix = ou=Groups
ldap admin dn = "cn=sambaLabs2,ou=roles,dc=domain name,dc=com"
ldap ssl = start tls
server string = "my File Server"
security = user
log file = /var/log/samba.log
log level = 1
Max log size = 50
wins support = yes
wins server = my wins servers here
winbind enum users = no
winbind enum groups = no
unix extensions = no
wide links = yes
hosts deny = ALL
hosts allow = 192.168.
interfaces = lo eth0
bind interfaces only = true
browseable = No
read only = No
usershare allow guests = No
load printers = yes
printing = cups
printcap name = cups
printcap cache time = 750
cups options = raw
map to guest = Bad User
[homes]
comment = home directories
browseable = No
valid users = %S
read only = No
writable = yes
create mask = 0660
directory mask = 0770
inherit acls = Yes
inherit permissions = yes
[sharefolder]
path = /sharefolder
valid users = @users,%S
inherit acls = Yes
inherit permissions = yes
[printers]
path = /var/spool/samba
browsable = no
public = yes
[print$]
comment = Printer Drivers
path = /etc/samba/drivers
browsable = yes
guest ok = no
read only = yes
write list = root
force group = ntadmin
create mask = 0664
directory mask = 0775
Thank you in advance.
View 1 Replies
View Related
Oct 12, 2009
Today I try to shared a folder for Windows XP using GUI in OpenSUSE 11.1. I created a folder --> right click and click on Share --> Check on "Share with Samba(Microsoft Windows)", "Public" and "Writable". Then connect from Windows using //192.168.100.1/sharefolder. It open up but I can only read (no write access as I check on "Writable"). Did I miss something?
View 1 Replies
View Related
Nov 11, 2009
I am trying to mount a nfs share which is located on my freebsd server to new centos 5.4 server but something wrong. If I try to mount nfs share on bash
"mount -t nfs server: /mnt/fornfs /mnt/nfstemp/"
It is working properly. But when I put a line in fstab like this
"server:/mnt/fornfs
/mnt/nfstemp nfs
nfsrsize=8192, wsize=8192,
timeo=14, intr, tcp 0 0"
It do not mount the share. How can I mount it at startup?
View 4 Replies
View Related
Nov 11, 2010
I've began to work on getting my access control, set up properly on my server, and want to create a "my documents" folder for each user I add. I do not want it being part of the home directory and have read everything and still can't seem to get it to work. I've got a second drive that is mounted at /private on my server, with a folder that is underlying on it call users and groups. Then from there is has the exact unix username that I set up in Users and Groups. Ex. /private/user/gary . With Samba, I added the following code:
Code:
[My Documents]
guest ok = no
comment = %u's Documents
[code]....
I've tried using %u,%U,%S, and the normal username and of all of them, it will only work with the username. I've even used force user. added root to the valid users list and it still gives me access denied or the multiple connections to a single share with multiple user names prohibited but nothing is mounted on this share. On Webmin, it doesn't show any connections to the share. I'm rather at a stumped state in which is frustrating me, because I want to have this so when I go from my desktop to my laptop I have "My Documents" On either unit. Security on the server is set to User because I've searched to see if I can't find a way to make shares visible by a guest but read only to them and when I access them from my log in to make it read write using the "Share" option.
View 9 Replies
View Related
Apr 27, 2010
I have mounted window shared partition to my RHEL 5.4 server through following command
Quote:
But I'm unable to mount the same via fstab.172.20.x.x is my windows server download is my shared folder name.
Suggest me correct fstab entries
My current fstab entry is as follows
Quote:
View 5 Replies
View Related
Nov 13, 2010
my samba server is working properly but i want to mount it permanently on linux (red hat) client.i have tried /etc/fstab and also autofs service but both are not working for me.
1. /etc/fstab i made the following entry in it //192.168.0.254/myshare /temp smbfs credentials=/root/pass 0 0 and when i use comman mount -a it shows "unknown filesystem smbfs" why this is so?
2. using autofs
my auto.master file is shown below
#
# $Id: auto.master,v 1.4 2005/01/04 14:36:54 raven Exp $
#
# Sample auto.master file
[code]....
View 13 Replies
View Related
Sep 21, 2010
Is there a way to mount a Windows Share into a Linux folder? I'm using OpenSuSE 11.1.
View 4 Replies
View Related
Jan 10, 2010
I cannot connect to a share on Windows XP machine, because it rejects my password. I'm using correct username and password. When running from console, smbclient's error message is: session setup failed: NT_STATUS_LOGON_FAILURE I can connect to said share from other Windows machine.
View 9 Replies
View Related
Mar 4, 2010
I'm trying to access shared directories on a WIN/XP box in my home lan and get that message.
I can access other shared directories on a Win-7 box, but not those on the old WIN/XP box.
Where to start to debug this?
View 4 Replies
View Related
Mar 21, 2010
i've been trying to network with the other computers that are in the house so that we can share music and pictures and what not, but, everytime i try to view one of their computers it says unable to mount location failed to mount windows share.
View 1 Replies
View Related
Apr 16, 2010
I'm using Unix services for windows on a windows system and shared a few folders using it; now how can I mount it on Linux?
There's no way you can search for this question online. These search terms -
"mount windows NFS share linux"
Also mean -
"mount linux NFS share windows"
and -
"mount share windows linux NFS"
Which actually means NFS 4 which supports SMB protocol.
So actually it's IMPOSSIBLE to search for this and so this will be a good sticky.
View 9 Replies
View Related
May 6, 2011
I am currently in a more mixed environment as I desire and I need to mount samba shares because I need to work with the data. I noticed that nautilus does not really mount the shares and some applications cannot deal with smb urls. I searched and found this old thread: [URL]. Is it possible that after all these years, this is still unchanged? To permanently mount on boot time is not an option for me as the drive will not always be available - already changes when I move within the office from fixed to WLAN (e.g. when going to a meeting and vice versa).
View 1 Replies
View Related
