I'm using openSUSE11.0 in VirtualBox 2.2 on XP so files need to be shared between it and the host. But do I have to mount the share folder every time? Here's what I typed in terminal:
sudo mount -t vboxsf share /media/share
// the first share is the folder in the host, and it works for each time
How could I set it once and for all?
I've tried using the "devices->Shared Folders" to create a shared folder but it didn't work. I still couldn't see it from the guest OS (winXP). I also, tried sharing a folder in winXP and then tried adding a network folder in dolphin - also didn't work.
View 4 Replies View RelatedI am running puppy linux in VB, I cant access shared folders.
View 3 Replies View RelatedI have a windows machine (in a domain) and I have created 2 Virtual Machines with Suse 11.2 installed on them.Now, I want to share a folder in windows to both Suse images. I am succesfully able to do that.I used: mount -t cifs -o user..... command to mount it at /mnt/win on my linux and succesfully able to work with it.
Now, I want a user in my Linux box (both Linux images)to be able to write to the shared folder in windows (actually both linux images will write to the shared folder but it is based on acquairing locks and releasing them to be able to use the shared folder on windows).
I tried etc fstab and lot other options but my efforts were in vain.Simply put - I need a user in my linux box (suse 11.2) to be able to write to a windows shared folder.
figure out how to share the folder to only special user? For example I have two computers host1 with users: user1, user2, user3 and host2 with same users: user1, user2, user3, how to share test user2 folder form host1 to only user2 from host2 ? My system is openSuse 11.1. There is all Ive understood:
host1
[test]
inherit acls = Yes
path = /home/user2/test (drwxr-xr-x)
read only = No
guest ok = Yes
read list = user2
valid users = user2
admin users = user2
host2
mount t cifs //host1/test /home/user2/test
It works but either user2 from host2 cant write to test share on host1 (drwxr-xr-x) OR all can write in this share (drwxrwxrwx). Ive googled it, searched here and read this: Chapter16.File, Directory, and Share Access Controls, but without successes.
I tried to mount a NFS share folder from another subnet. The NFS client on my SUSE 11 server could not detect it. The folder is in a different subnet. Is some one know how to make it work?
View 6 Replies View RelatedI would like to share a folder from a Linux Guest with a Windows host (with read and write access if possible) in VirtualBox. I read in these two links: here and here that it's possible to do this using Samba, but I am a little bit lost and need more information on how to proceed.
So far, I managed to set up two network adapters (one NAT and one host-only) and to install Samba on the Linux guest, but I have the following questions now: What do I need to type in samba.conf to share a folder from the Linux guest? (the tutorial provided in one of the links above only explains how to share home directories) Are there any Samba commands that I need to run on the guest to enable sharing? How do I make sure that these folders are only available to the host OS and not on the Internet? Once the Linux guest is setup, how do I access each of the individual shared folders from the Windows host? I read that I need to mount a drive on Windows to do this, but do I use Samba logins, or Linux logins, also do I use localhost? or do I need to set up an IP for this?
I had share my folder through network with other PC,now i want to Rivert(un-share) this,how can i..?
I had right-click on that folder but i didn't get any option for that....it's my first time of sharing data via samba..
I'm probably missing something really simple here...
In Ubuntu, with Nautilus, there is an easy GUI method of making folder to be shared and visible over the network.
I can't seem to find the means of doing this in Xubuntu, either in Thunar or Gigolo.
I can use either of these to browse folders on other networked machines I have shared using Nautilus.
I had Nautilus for a while on my XFCE machine and used that to share some folders, but I removed it as it was conflicting with Thunar at times.
In this post I will give a quick solution for a possible problem with sharing a folder in Fedora 15.I had to spend some time for research and frustration so, hopefully this post will save you from both. If you have Samba installed and configured to share certain folders on your Fedora machine for a Windows network but, they can't be accessed then following might solve the problem:
1. Go to Applications, Other and run FIREWALL
a). go to TRUSTED SERVICES and check SAMBA and SAMBA CLIENT that are located in the list of services
b). click APPLY
c). go to ICMP FILTER and check ECHO REPLY (PONG) and ECHO REQUEST (PING)
c). click APPLY
[Code]...
If your Samba is configured correctly, your shared folder should be available on your Windows network.A little hint: if you don't want other users to use passwords for accessing your shared folder, select SHARE as an Authentication Mode in Samba GUI Configuration Tool, Preferences, Server Settings, Security
We have a storage server here running Windows. I have full permission to my share, blah blah, whole 9 yards. When I'm on Ubuntu and connect to it, I cannot create a folder or paste any items in "my" folder unless I put it in a sub folder.\storagejason = cannot create folders.\storagejasonstuff = can create folders.So, I come here asking the obvious question: dubya tee eff??
View 1 Replies View Relatedmy ubuntu machine disk is already full, i want to set the save location of of bittorrent to a network share in windows is this possible?
View 3 Replies View RelatedI recently applied a bunch of updates to my guest OS (Ubuntu) inside VirtualBox (NOTE: NOT updates to virtual box. Updates to the OS) and now on startup, I get the error:
"An error occurred while mounting /media/share. Press S to skip mounting or M for manual recovery"
I tried a fix which said to comment out the mounting in /etc/fstab and instead put it into rc.local, but this does not work.
Also, when I press "M" to try it manually and type:
mount.vboxsf -w mysharedfolder /media/share
I get the error:
mount.vboxsf: mounting failed with the error: No such device
But before I updated Ubuntu, that shared folder worked perfectly!
Is there a way to mount a Windows Share into a Linux folder? I'm using OpenSuSE 11.1.
View 4 Replies View RelatedI have four PCs in my house that are running opensuse 11.2 and I want to create a home network to share files, scanner and printer.
View 4 Replies View Relatedi have 3 comps(running suse 11.3) and a laptop(running vista sp2). i have installed samba on all suse comps. i have a printer attached to one of the comps and it has been shared also the internet connection on that comp has been shared. all the computers are connected using lan cables through an ethernet switch. i also have a wireless router which is connected to the ethernet switch.
I am able to view all the comps on the network except the laptop running vista. all the desktops are visible on the network and are able to print and share files on the network and also connect to the internet. the laptop running vista can connect to the internet but its not visible on the network and nor can it share files across the network or access the printer.
I've just installed Ubuntu 9.10 and Samba 3.4. I've shared a folder and have accessed the share from a Windows 7 client. However, I've struggled to configure the share and folder so that the Win7 client can create files and/or folders in the share. Kept getting Permission Denied errors. Finally, (using Webmin) I set the permissions on the file folder so that "Other" had write access. I don't understand why this was necessary (and how unsecure this is). I already had the write access checkbox ticked for "User" but it wasn't enough.
View 1 Replies View Related1. I have Ubuntu 10.04.1 installed alongside Windows Home premium 7 on a Compaq CQ5110f with 2 dual processors, 320 GB HDD, 4 gb Ram, less than a year old/ It is giving me some error messages. It is wanting to lock the drive or various programs after being left unused for a few minutes, I have not found where I can disable this. I do not need passwords, really. I am the only user. I reinstalled it once, on top of itself (Ubuntu) and it worked fine briefly, then started doing it all again.
I use to sometimes install Ubuntu as a windows app. on a previous version, maybe 9.04 - 9.10, but think I can not do it on this version?
So, Can I install as WIndows app on this version of Ubuntu? CAn I install Ubuntu on one drive alone, and windows on the other drive alone, install both in same computer and get dual booting? I think before, to do that I had to reset boot drives in BIOS to whichever I had the OS I wanted to use?
Or MUST they be installed on same drive for dual booting to be available?
I am attaching screen shots of the messages I get, etc. I have tried to share files and folders, but it does not allow me to select Share this folder as some security thing is not installed, And the time I am required to enter password to use comp[iter after being idle a few minutes, seems to be tied to my folder, which is JOHN. I may have to think about removing Ubuntu from this drive, add a SATA drive and use two, one for Windows and one for Ubuntu.
I am used to Ubuntus simple sharing with samba. Just install it, reboot and then share the files.Then do I klick on network folder and see all the shared files on the computers in the network.
How do I install it so I only need to go into network folder and see the other computers shared files.Then, how do I share files?
I hope it's not so difficult and that I have to change i config-files.
I am new to Fedora.
I wanted to enable file sharing in for one of my folders under the home directory. I noticed that the 'not shared' and 'shared' always defaulted back to 'not shared'. And now I see what looks like an electrical plug icon symbol over the folder icon symbol like I might see used for some of the root folders. What does the new icon indicate about the folder attributes and why does file sharing default to 'not shared'?
View 1 Replies View RelatedEvery time I try to empty the waste bin I get dolphin error - 'The file or folder /.local/share/Trash/files/IMGP1676.DNG does not exist'I tried to recreate the file 'IMGP1676.DNG' , deleted it i.e. sent i to the waste bin and then tried the empty waste bin again, although this time it was there and deleted it still reported the same error.du -h .local/share/Trash/files/ 12K .local/share/Trash/files
View 2 Replies View RelatedQ: How can I allow my users to mount a cifs share without an entry in fstab in OpenSuse 11.4?
I have an answer myself. Until OpenSuse 11.2 I could mount my samba shares by making mount.cifs and umount.cifs setuid root. Today I installed OpenSuse 11.4. Unfortunately mount.cifs isn't anymore allowed to be setuid due to security concerns. Security is not an issue in my case, so I copied the mount.cifs and umount.cifs from 11.2 to make it work again:
1. Download cifs-mount-3.4.2-1.1.3.1.x86_64.rpm from this repository (I use 64 bit):
"http://download.opensuse.org/distribution/11.2/repo/oss/suse/x86_64/"
2. Extract the files mount.cifs and umount.cifs from the rpm and copy them to /sbin
3. Make them setuid root:
Code:
linux-y5qw:~ # chmod u+s /sbin/mount.cifs
linux-y5qw:~ # chmod u+s /sbin/umount.cifs
4. Mount your cifs shares as a normal user:
Code:
martin@linux-y5qw:~> /sbin/mount.cifs //192.168.2.2/data /home/martin/data/ -ousername=martin
Password:
OpenSUSE installed in a Virtualbox Virtual Machine and I want to set a shared folder.
1 - Set up a Virtual Machine and install OpenSUSE 11.2
2 - Create a shared folder on host (HostFolder)
3 - Setup the shared folder in Virtualbox Via the Virtual Machine details or via Devices > Shared Folders...
4 - Install dependencies for running the Virtualbox installer You need to install the right development kernelpackage for your machinetype (use 'zypper search -i kernel' to see what's installed) sudo zypper make gcc kernel-source kernel-hosttype/default-devel
5 - Run the Virtual Machine and go to Devices > Guest Additions This mounts an iso image in your OpenSUSE guest.
6 - Open a root terminal and run
cd /usr/src/linux
make oldconfig && make prepare && make scripts && make dep
cp ../linux-obj/$HOSTTYPE/default/Module.symvers .
make prepare
* A commenter on previously mentioned thread says this step is unnecessary but it doesn't work without on my system. I suggest trying step 7 first and returning to step 6 if that fails. *
7 - Run ./VirtualboxLinux yourhosttype .run from the mounted iso image.
8 - Create shared folder in OpenSUSE (GuestFolder)
9 - Test with sudo mount -t vboxsf HostFolder /home/user/GuestFolder It works? Great! Let's set up the system so it automounts for your regular useraccount instead of root-only access.
10 - Add this line to /etc/fstab HostFolder /home/user/GuestFolder vboxsf defaults,uid=1000,gid=1000 0 0
11 - It works for me but if it still doesn't automount after a reboot; sudo mount -a
The only things i need out of it are: mars_nwe (Netware server under Linux) and a reverse telnet server (the dos machine is a bbs) I need the virtual server to support a very old dos machine, and while i COULD use samba for drive mapping, the VNC server I'm useing on the dos machine is a progrm called TINY which pretty much means i'm stuck useing the novell dos network stack.
how best to configure opensuse for this? I'm running the install off of the live-dvd which has quite a bit selected by default. I'm not in need of an x-server or a desktop manager, as this will be a set it up and forget about it once it works VM
I have some problems accessing a smb share by name. Few day ago I was able to access the share by name but seems that today I cannot access anymore. I tried to restart the computer .. but nothing happened. Notice that the dns server is responding and is working correctly.
How can I debug this problem. It's annoying because I don't know all the IP addresses of our internal servers.
I have a share accessible from XP. However if I go for lunch and come back when I click on the share in Explorer it says its not accessible. When I click on it again it works. Its like the network card in the Suse server is going to sleep but I cant see any settings for it. I know where they are in XP and wonder if they are somewhere in openSuse? Or if there is some other explanation.
View 6 Replies View RelatedI have Ubuntu on one machine and open SUSE on the other. Both connected with an ethernet cable to the same router. Both connect to the internet ok. I did manage to set up 2 machines both running Ubuntu with file sharing but now I have switched one to SUSE I seem to be getting into a mess. Ubuntu sees the SUSE machine but does not open any folders. SUS does NOT see the Ubutu machine. I have looked for a beginners guide to setting up file shaing with SUSE without success. (I like SUSE better because I can use my Audiophile sound card "out of the box")
View 9 Replies View RelatedSystem: openSUSE 11.3, Gnome
In the Windows network, there are 2 or more shares as follows:
I can access both shares in nautilus e.g. "smb://bla.bla.company.com/share $". The shares are mounted then in "home/user/.gvfs/". ok.
In one of shares, is a file-based repo, which I can access easily with svn.
Unfortunately when I try to checkout any normal folder from a share (as in MS$ with Tortoise), I fail...
What's more in the file-based repo, external references exist to other shares in the network, the name is as "file:///X:/folder/file.txt". SVN gives error messages about such references and does not access files (where "X:/" is also mounted, but as a "test$ to smb://bla.bla.company.com/test$" in "home/user/.gvfs/ ").
My questions:
- what is the best solution to mount shares, so I can access all the SVN repos?
- How can I access normal files and folders from a share with svn?
- How can the problem with external file references in a file-based SVN repo can be solved? without to checkout/commit files "manually"...
- Some checkouted scripts (Perl, etc.) use libs from shares:
"Use lib qw(r:/tools/perl/lib/). how to get around this as well?
- How can I change mount-names: "test$ on smb://bla.bla.company.com/test$" to something like "share-test$?
- How can I change the mount location? in "home/user/SAMBA/" instead of "/home/user/.gvfs/"..
I had tried to use "fuse-smb": installed, created config, but when I run "fusesmb /home/user/SHARES/", i get an error message: smb.conf is missing.. Where can I get this config?
And one last question: Can someone recommend me a svn-gui? i have tried tried rabbitcvs, esvn and some others .. but all either do not work or crash.
I'm not sure, but maybe I can use svn and tortoise in wine, and checkout/commit the necessary files from/to "home/user/project/"? there raises the questions whether it is possible to install tortoise in wine and how to mount the shares on the wine? How to manage the hard-coded lib-names in some scripts...
have a server here running opensuse 11.3 that I need to access via network using samba.
Samba is working so far and I can ping the serve and browse the shares from windows (WinXP) computers; but only via the IP.Now I've read up on samba on this forum and other sources, like the official samba documentation and compared my smb.conf with an older one on another server which works (and even copied this one over to the new one) - to no avail.I seem to be missing something and I just can't find it.Since the problem is probably not in the smb.conf (previously working one doesn't work on new server) - where else could I have screwed up?
I have a samba server on my LAN. It can be accessed without any problems from Windows machines on the LAN without password. I have two computers that I have updated to OpenSuse 11.2 (both used to run 10.3). Since doing this upgrade I can no longer access the samba share from the Suse machines. Basically, both Dolphin and Konqueror ask for a username and password to access "avoca" (the workgroup).
View 9 Replies View Related