I had a google of this but can't find anything useful. I use networkmanager to configure my wireless card. Currently this only works when I'm logged in to KDE. If I log out the system loses the network connection. Is there a way to make it persistent using NetworkManager?
View 9 RepliesI want to share my WiFi internet connection over LAN, so I'm trying to set up IP forwarding. An old tutorial tells me to go to Network Settings in YaST to do this, but that applet says that NetworkManager is now handling all of that stuff.How do I enable IP forwarding while NetworkManager handles my internet connections?
View 2 Replies View Relatedsince a few weeks I have a problem connecting to other hosts when I'm using another wireless network, which has a different DNS IP than I have in my network. I have to change /etc/resolv.conf to change the nameserver. Can NetworkManager control the nameserver? If yes, how?
View 3 Replies View RelatedI have a crappy cat5 cable that only works at 10BaseT settings on any nic. I have a gigabit nic which I configure using;Quote:ethtool -s eth2 speed 10 autoneg offProblem is that this setting doesn't stick after a reboot. How do I make the change permanent?
View 4 Replies View RelatedI have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.
View 7 Replies View RelatedDoes anyone know how to permanently enable X connections from all machines on my local network. I keep having to enter 'xhost +' to allow X connections.
View 2 Replies View RelatedI have no Internet Access with Firefox
I first tried an upgrade from 11.3 to 11.4 and lost Internet Access, so i re-loaded 11.4 from scratch on clean partitions.
I am connected to my wireless WPA2/PSK connection, have an IP, am able to see the network.
I turned off and disabled the SUSE firewall.
I tried setting Firefox proxy settings to auto and to none, i dont use proxy.
I am currently posting this through an SSH connection to my 11.1 server from the new install of 11.4 on a Dell latitude D600 laptop (not using the on-board Broadcomm that is an issue for a later date).
I am running out of ideas anyone got a clue.
I just finished a fresh install of 11.3 on an HP 7900 small form factor and have no network connectivity. In Network Tools eth0 shows the state as inactive. Network Connections didn't have a connection, so after letting it create one there is no MAC address. I copied and pasted the MAC address from Network Connections eth0, set up a static address with default gateway, netmask, etc. all set appropriately and rebooted. Still no joy.
I want this to get an address via DHCP, I just set up a static address for testing.11.2 sensed the NIC without issue, but 11.3 doesn't seem to like me right now.I wanted to get this deployed on 40 machines today. Oh well.
network manager isnt showing any network interfaces. ifconfig shows wlan0 and eth0 and internet is working. how can i get network manager to manage those connections?
View 8 Replies View RelatedI remember when using openSUSE 11.3 with KDE 4.5, the network connections started to show the last date used for my "NIC".I am using the plasmoid-networkmanagement plasmoid and KNemo.After I downloaded and installed openSUSE 11.4 64-bit, the network connection no longer shows the last date used. I have set up my card via Yast and Iam connected directly to the Internet. No proxy.To find where this is located, navigate to:Configure Desktop --> Network Settings --> Network Connections --> Wired tab.
View 2 Replies View RelatedFirst a warning that I'm so clueless it hurts. Initially I entered the Linux world as a solution to my blue screening Alienware Aurora desktop (which later fried anyway ironically enough). I decided to give up on Windows for everyday use cause you can't strangle an operating system. My first and there after Linux experiences have been fantastic. Internet works without prompting through various distributions of Ubuntu, Mint, and KDE with the exception of enlightenment.
But now I come to openSUSE 11.4 and as my title suggests I'm having a hard time connecting to the internet. I've got a wireless card and router and all that jazz but I can't even select the options for wired or wireless connections under Network Connections in the Network Management Settings. Everything is greyed out except for VPN. I even have the desktop wired to the router and it still is not giving me any indication that it will connect.
I'm wary of trying to enter ip addresses and things of the like because I honestly don't know what i'm doing here.
My router is a Netgear N150 Wireless WNR1000 and in the Kinfocenter under Device Viewer I found my wireless card to be a RaLink RT2561/RT61 802.11 g PCI and my wired device thingy to be an Intel 82540EM Gigabit Ethernet Controller.
i dont have networkmanager. what can i do?
View 2 Replies View RelatedI'm running Squeeze and I'm looking 3 days now for a solution in some weird problem. The NetworkManager Applet shows that there isn't connection although I am connected. The icon has this small "x" and when mouseover it says "No network conncection". Moreover when left clicking it, it says
"Wired Network Device not managed"
While I was looking for the solution a came across this post by an Ubuntu developer who says:network-manager-applet displays the connectivity state of network-manager's managed interfaces not every interface. So the title "network manager says disconnected but is connected and working" is actually misleading. The interface is connected and working but not from network-manager's point of view since it is not managing the interface. Additionally, in Lucid now network-manager applet displays nothing now for non-managed interfaces so is less misleading. You can check to see whether or not an interface is managed by network-manager by using the command line too nm-tool. You'll see "State: unmanaged" for unmanaged interfaces.
I am experiencing troubles when connecting to my new private network under Linux (works fine with Windows). I cannot get an ip address and the logs tell me a bit more, but I would like to know how to proceed to resolve this issue. My network adapter is an Intel Wifi Link 5100 using the iwlagn driver. Connecting to other WEP APs usually works flawless, it's the first time my system won't connect at all to this particular WEP encrypted access point.
Logs: NetworkManager: pastebin - collaborative debugging tool
wpa_supplicant: pastebin - collaborative debugging tool
I seem to have somehow messed up my repositories and now NetworkManager isn't working.
I have two errors happening, which I'm sure are related. First of all, when I try to load knetworkmanager, I get the error:
Code:
knetworkmanager: error while loading shared libraries: libkminterminals.so.4: cannot open shared object file: No such file or directory Second of all, when I restart my computer, upon loading I get a message from Akondi Server Self-Test saying several databases failed. I've never seen this before, so I think fixing these errors would be best? Some of the errors are MySql failed, akondi not registered at dbus, etc.
Lastly, I don't have a wired connection so currently my machine has no internet. I'm using a second laptop to get necessary files and I transfer them with usb.
I find that the new KDE4 notification icon is not very easy to see.The "progress" indication is a microscopic vertical progress bar, that I find very difficult to interpret.OK, it is a minor annoyance, but I do find that I regularly try to use the network on my laptop before the connection has been established.It is also a regression over the icons in 11.1 or before, which were very clear.If people agree with me on this point, I will post a bug, with the aim of getting a clearer icon.
View 1 Replies View RelatedI installed OpenSuse 11.2 LiveCD. I'm currently running patch download and installation so maybe this will fix my problem. When I use NetworkManager, WPA or WPA2 are not an option. I'm give four encryption methods (WEP 40, WEP 128, LEAP and Dynamic 801.x) Is this a problem with my Thinkpad T23's 802.11b wireless card? Do I need to install a patch?
View 4 Replies View RelatedI have a successfully connected VPN connection. When hovering on the networkmanager applet it show beside the wireless connection also the connected VPN. The icon also changed from staircase-bar to staircase-bar with forelock. Oh yeah I'm using GNOME desktop.However when right-clicking on it and choose Connection Information I can only found tab for the wireless connection. How can I have the information tab also for the VPN connection, showing like IP address and gateway used?
View 1 Replies View RelatedI just tested Networkmanager on OpenSuSE 11.2. I tried with my wired connection and it works.
I thought I test to connect with network sharing with my Android phone. The Android phone connects according to Networkmanager, but I'm not sure if it actually works as the wired connection is still active.
I tried to figure out how to disable the wired connection, but eventually gave up and just pulled the wired network plug.
But surely, there must be a way to disable connections from Networkmanager?
On fresh install of 11.4 everything worked fine, but after some updates networkmanager stopped working properly on my netbook (intel atom n270 based).When I log in, network manager shows that networking is disabled and I can't connect. Checking/unchecking the checkbox does nothing. All settings in Yast are OK.To make it work, run "/etc/init.d/network restart" and then plug in the wire OR (in case of wireless connection) I restart network from console, unchecck and check the checkbox in networkmanager and only then it starts to work as it should.
View 9 Replies View RelatedInstalled opensuse 11.4 and wireless network started automatically. Then I changed the name of the computer in YAST, and restarted. Now I cannot get NM to start automatically at boot. The red X shows up on the panel app Network Management and settings buttons do not activate the wireless device. I have to start NetworkManager from the command line. After about 30 seconds the wireless hardware symbol turns on and then I can connect to the network.
HP Pavilion Dv7
opensuse 11.4 64bit AMD
RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
KDE desktop
[code]....
How can I enable the network with Networkmanager WIHTOUT logging in in OpenSuse 11.2?
If I define a connection for ethernet the System connection is greyed out. I want to use Networkmanager because I have also wireless connections...
I installed a new 11.2 and now my huawei e1692 works (thanks to huawei e1692 don't work -
openSUSE Forums).
kde=Versione 4.3.4 (KDE 4.3.4) "release 2"
kernel=2.6.31.5-0.1-desktop
[code]...
I'm currently struggling with the following problem: Connecting to a wired network with NetworkManager (0.7.1) is no problem at all: Everything is set up automatically, including the default route:
[Code]....
When I now add the route manually it works. But as soon as the cable is plugged in, the NetworkManager overwrites the routing table entry again (which makes it quite annoying). Does anyone know a way to avoid this behaviour?
I've run into a situation where knetworkmanager tells me networking is disabled. If I switch to the ifup method in Yast then I can get online but when I switch back to user controlled knetworkmanager tells me that networking is disabled.I've actually had this happen twice.The first time I somehow managed to get it working again (I thought it was by right clicking on the icon in the system tray). This time I don't see the same option.Has anybody got any suggestions on how to get knetworkmanager working again.
View 9 Replies View Relatedi've been able to narrow down a freezing issue on my laptop, down to NetworkManager when i have a cifs share mounted in fstab.removing the cifs mount, or using 'ifup' method appears to fix the issue.the problem is when my laptop resumes from sleep, and when using NetworkManager with cifs share, then i get a 20second freeze when using the launcher while the network sorts itself out. this happens on either wifi or wired connections. this freeze only occurs when using the Launcher for the first time after resume. if i dont use the launcher then everything is fine untill i do (ie: i have network access and desktop shortcuts work fine)
View 1 Replies View RelatedI'm working with a Ubuntu 10.04 LTS system with two network interfaces (both Ethernet). I wish to setup this system such that it is simultaneously connected to my local and an OpenVPN network and able direct traffic between the connections depending on what program is sending the traffic. The problem: Under my current OpenVPN configuration all network traffic is directed to the VPN.
My OpenVPN config file (some details omitted)
--remote [gateway ip] # vpn12 load:
--remote [gateway ip] # vpn11 load:
--remote [gateway ip] # vpn15 load:
--remote [gateway ip] # vpn16 load:
[code]....
In practice, I would like OpenVPN to operate out of one of my two network interfaces and leave the other interface connected to the local network. Then by default all network traffic should be directed to my local network unless I specify (on a per program bases) that certain traffic should go though the VPN. These two network connections can (should) stay completely independent of each other and do not need to talk to each other.
I'm having some trouble with my networkmanager on openSuse 11.2. I want it to get the DNS Server from DHCP, but it notices that I had another process modify it (dhcpcd to be exact) and it just won't overwrite it, resulting in an out of date DNS server to be used.
View 2 Replies View RelatedJust installed OpenSUSE 11.2 and I have to say it feels great.Only gripe I currently have is the NetworkManager that is starting up very slowly. When I have logged into KDE KNetworkManager applet says that NetworkManager is not running and hence I have no network connection. This is fixed if I start NetworkManager (as root) or just wait a couple of minutes. I have one ethernet interface only, no wireless
View 4 Replies View RelatedI cannot seem to find where the conf files for NetworkManager are stored in suse 11.3. I want to manually edit my IP address without using the gui.
View 5 Replies View Related