I have a machine installed Red Hat Linux 8.I have installed xampp-linux-1.7.3a.tar. I've finished installing lampp start.But it still does not understand why when I use the website notice:"connection was refused when attempting to contact localhost".
View 4 RepliesThis is a follow-on to "samba write failure crashes linux". It has the dmesg output when the write failure occurs.The remote server is os/2 v4.50 fp3.The failure occurred in this instance attempting to write a file from the localhost to a samba-mounted resource on a remote host. The failure always happens when at least 3 MB have been transferred. Smaller files are not a problem.
Other cases:
1. Saving any email (thunderbird) attachments to the localhost,
2. Downloading anything to the localhost using Firefox.
The most notable aspect are the phrases "kernel BUG" and "invalid opcode".
[Code]...
I tried to finally set-up surround sound on my Ubuntu 10.04 machine and i was successful in doing so after a while of changing settings and tinkering. After doing so though, i was later in the day not able to get into the Pulseaudio Volume Control, therefore, everything is stuck where it is and i can't change anything. When i try to open Pulseaudio Volume Control i get the error message, Connection failed, Connection refused. My programs still play sound and i can control the sound of the programs through the programs, but i cant control the sound of the sorround sound now and my main sound bar only affects my stereo speakers, not the surround ones.
I believe this may have happened after the random disk check on restart, but i can't 100% confirm that and i'm not even sure if they are related. I still have sound, but i have no way to control the volume of my entire system at once. I did some looking around online and saw that others are having or had the same issue, and it was through different versions of Linux also. somehow reset everything so i can access PAVC and start over . I also tried steps listed in another thread here on the same topic, but they weren't working and it also seemed to be for older Ubuntu versions.
[Code]....
I'm trying to create a PAN (Personal Area Network) using a laptop (Siragon ML-1040) and my desktop computer, but I get the Connection Refused (111) error.
Blueman doesn't detect any network service between the two computers unless I start PAND on one of them and then it detects the NAP service. That, only after I enable the NAP/Workgroup services on the Services submenu in Blueman. However, it doesn't work neither with the NM plugins or without them (dhclient and that other one I can't remember the name of).
Any clues over here? I'm using pand 4.91 and blueman.
vsftpd not working on my CentOS system. I tried logging in using FileZilla but the error message was: Connection attempt failed with "ECONNREFUSED - Connection refused by server".
View 7 Replies View RelatedOver the last several days, I've been trying like hell to share my (wired) Internet connection with a netbook, running Windows XP, attached via crossover cable to my desktop's extra NIC (eth0). The eth0 link is established, but I can't get to the Internet from the Windows XP machine.I can ping one machine from the other, but any bits sent from the Win XP netbook mysteriously disappear when trying to reach any website.
There is no firewall running on the Ubuntu machine as far as I know. Windows Firewall is likewise disabled on the Windows XP machine. The Ubuntu machine connects to the Internet through another wired NIC, eth1.In Windows XP parlance, what I am trying to do would be called "bridging," where eth0 and eth1 would be the two parts of the bridge. In fact I already made it work, with both the netbook and my desktop running Windows XP. It took about 5 minutes.I can't believe what a huge pain this has been in Ubuntu. I'm pretty much ready to give up. There seems to be no way to get an Ubuntu system and a Windows XP system to share an Internet connection.
i m using RHEL5 on my server machine and open suse 10 on my client machine.both system ping each other, firewall is off of my server machine,i put a file from my client to my server machine using scp command but ftp command is not working when i want to open connection i receive a message "connection refused".what can be the issue?
View 5 Replies View RelatedRegarding fedora12. how to set up the port 8080 and or tell me why I cannot connect to localhost 127.0.0.1?
I tried to add port 8080 to firewall under other ports, but still doesn't work.
When I connect with my vps server through openssh, doesn't establish connection. Openssh is active (see its status), port 22 is open, the sshd_config file is the same of original copy (I have saved one in the case I did a mistake) the only line different permitrootpassword is set on ''no'', there isn't a firewall that block ssh connection and with other remote desktop control like remmina works well.
View 13 Replies View RelatedI've just completed a fresh install of Ubuntu Server (x64) on a HP Proliant N36L. During the installation I selected to install LAMP, SAMBA and SSH. To continue the installation of software on the server I wanted to connect remotely from windows PC on the same LAN. I am using PuTTY but when I try to connect I get "Error:Connection Refused". I have trawled the forums regarding the setup of putty and openssh and everything appears to be correctly configured.I have checked that the services are running on the server and that the IP address for the server is correct.The guides I have read online suggest that ssh should be correctly configured as part of the install, so why can I not connect from the same LAN?Is the firewall enabled by default during install?
View 2 Replies View RelatedI am trying to install the cvs server for the first time on centos , the sercive xinetd seems to start. but when i try to connect to the server using this command cvs -t -d server
It prompts for the password once i enter the password it gives me the error - cvs: Connection refused
Secondly if i telnet to the port 2401 it gives Trying 10.... telnet: Unable to connect to remote host: Connection refused
I checked the if the port is up by netstat-tulpn /netstat -na didnt show me the port 2401
I get a connection refused error whenever I attempt to connect to a remote ssh server, I tried the test at and it says outbound ssh port 22 is not being blocked. I'm wondering what else could be the problem.
View 3 Replies View RelatedI am experiencing a problem with Nagios running some checks on our Ubuntu 10.04 servers.
we have 16 Nos HDD in each servers. These HDD's are checking by nagios with CPU and users.
For whatever reason, all of the checks will come up with the response: "Connection refused by host".
We have checked the server at the time of occurence and all seems fine. No memory issues, no CPU issues etc.
Then within 5-10 minutes the problem goes away.
ERROR:Connection refused (111)when i change the password.I have a freebsd dovecot server.
View 1 Replies View Relatedat the computer shop we have an ubuntu 9.10 server that we log into via ssh or webmin today i was trying to ssh into the machine and got connection refused, so i logged into webmin and found the ssh server not running when i tried to start with webmin it i got the error
Code: failed to start ssh server * /dev/null not a character device went over to the shell command part of webmin and issued ls /dev -l and looked at the output and found something of concern
[Code]....
i need to set a cluster of two nodes for lamboot, i am using fedora 7
1. passwordles ssh is set.
2. a folder in the home directory is nfs mounted, both on server( 10.1.7.136 ip of the server)and client(ip of the client 10.1.7.129). lam
3. lam 7.1.1. is installed on the system.
4. a file named lamhosts is created containg the ip's of server and client respetively
[lamuser@localhost lam]$ cat lamhost
10.1.7.136
10.1.7.129
lamboot is working on indvidual system but on
[Code].....
I have a box running Fedora 14 upstairs and I've been trying to get it to run VNC server, unsuccessfully. I've RTFM, and followed the instructions step-by-step, but it still won't run. I'm getting no error messages. But when I try to connect from either a Window or Mac client, it either get a timeout or connection refused. I've read and tried all the troubleshooting; been working on this for about 12 hours now. Is there something major that I could be overlooking?
View 14 Replies View RelatedI am running 11.2 and set ssh to boot at runlevel 3 and 5 through yast and started the service through the terminal. I have turned off the firewall on my wireless router and in the local firewall. When I try to connect from a machine in my office, I get the following
Code:
ssh: connect to host xx.xxx.xx.xxx port 22: Connection refused
When I run telnet from the machine, I get:
Code:
telnet: connect to address xx.xxx.xxx.xx: Connection refused
telnet: Unable to connect to remote host: Connection refused
netstat -tlnp on my machine shows:
Code:
tcp 0 0 :::22 :::* LISTEN 31622/sshd
How could I determine, which element of network actually refused/close connection?
View 1 Replies View RelatedI need to browse the net more securely and bypass throttling by an infrastructure-dictator by creating a SSH Tunnel directly to my internet service provider and use it as proxy.
I tried both a dynamic and local tunnel, was a able to connect to the server and log-in just fine, but when I tried to surf I get a 'Connection refused' error.
Here's what I tried:
Code:
ssh -D 8022 user@tunnel.host -N
ssh -L 8022:tunnel.host:8080 user@tunnel.host -N
(not at the same time of course)
Then I set 127.0.0.1:8022 as proxy in browser settings. As long as the tunnel is open the browser displays a blank page with no error when I try to open a remote web page, while the terminal gives me a 'Connection refused' error.
I'm using OpenSSH_4.7p1 Debian-8ubuntu1.2, OpenSSL 0.9.8g 19 Oct 2007 on Xubuntu Hardy.
In case anybody is wondering this is perfectly legitimate. The tunnel.host I connect to is a server set-up by my ISP specifically for this purpose.
Either of the examples above should work as others who have the same ISP reported that it works. Therefore, I suspect this is an issue with my own security settings which are slightly on the paranoid side but I can't figure out what. Stopping ufw and explicitly opening port 8022 didn't help.
I'm trying to establish a connection between two laptops using sftp but am getting the following error message:
Connecting to <IP>...
ssh: connect to host <IP> port 22: Connection refused
Couldn't read packet: Connection reset by peer
ftp isn't working either. Both machines are running Ubuntu and connect to the internet through the same wifi router in case that's relevant. What could be the problem?
I cant connect with ssh to my workstation using my notebooks wireless lan. with cable I'm able to connect.so the funny thing is, if I first establish a connection from my workstation to my notebook (like ssh it or just ping the notebook) I'm able to create a ssh connection from my laptop to the workstation using wireless lan.scanning my workstation from the wireless lan of my notebook with
Code:
nmap -sT -p 22 ventury
says port 22 is closed
scanning it from the notebook with cable lan,it says port 22 is opened
scanning it from the wireless lan of my notebook an have sent a ping from the workstation before says port 22 is opened.ution.
I got a 64bit version of Kubuntu 10.04, up to date, installed on both, my workstation(ventury) and my notebook (defiant).the question is: Do I always have to ping my notebook first if I want to ssh from it to my workstation or is there some other solution? And why does it work fine with cable, but not with WiFi?
having a port 22:connection refused problem with SSH. None of what I have read has been what I have been experiencing, so I figured I would post here. The worst that could happen is this gets completely ignored, or I am told that there is already a solution, that I missed it, and directed to it. Here is my problem:
Just learned how to ssh into my machine a few days ago. Everything has been running smoothly until I ran into a little problem: all of a sudden I can't connect anymore. I have sshd-server installed and updated. I have sshd turned on
Code:
/sbin/service sshd start
And I even ran:
Code:
/etc/init.d/sshd start
Because I was told that it would start ssh from boot. Nothing has changed from today and yesterday and I haven't been having problems with port 22 being blocked.
I have also tried to ssh into the machine by the machine itself:
Code:
ssh <IP of machine>
with the same error.
I have been trying for weeks to solve this one and have researched everywhere I know to look. Nothing has helped. I am trying to ssh to my other machine (machine1=galla, machine2=cachin). Both run Maverick Meerkat 10.10. I get the following error when trying to ssh to galla:ssh: connect to host galla port 22: Connection refused
uname -a outputs:Linux galla 2.6.35-27-generic #48-Ubuntu SMP Tue Feb 22 20:25:46 UTC 2011 x86_64 GNU/LinuxAlso, sshd does not stay running. I can start it, but a ps tells me it is never running. I imagine herein lies the problem. But why won't it stay running?I am not running any firewall on galla (iptables -L told me that).P.S. I can sucessfully ssh out of galla to cachin. And, even if I just try to ssh localhost on galla, same thing happens.
Connecting remotely through FileZilla works ok, but I can't connect from localhost (FWIW I'm running WordPress and would like to be able to upload plugins from the dashboard).
I've got vsFPTPd installed and - I think - running:
Code:
# service vsftpd start
vsftpd start/running, process 25782
All ok so far... however I can't see it on any of my ports:
Code:
# nmap localhost
Not shown: 995 closed ports
PORT STATE SERVICE
22/tcp open ssh
[code]....
And of course if I
Code:
telnet localhost:21
That's 'Connection refused...'
Nothing in 'netstat --listen' either.
The odd thing is, I can connect fine using FileZilla.
To confirm, I have
Code:
local_enable=YES
set in my vsftpd.conf.
I want to fix my dns if I issue command service named restart it just wont execute the command all it say is connection refused error from rc.d just cannot figure out what the problem is my server is ruining on red hat Linux 9 which is also my proxy server.
View 6 Replies View RelatedI'm try to connect to pop.gmail.com via openssl usingopenssl s_client -connect pop.gmail.com:995and i always have one error socket: Connection refusedconnect:errno=29what can i do to make it work?
View 5 Replies View RelatedI am getting tcp client connection refused error, when trying to establish tcp client connection from redhat linux to solaris unix. Connect system call is giving connection refused error
View 3 Replies View RelatedI am using redhat on server and open suse on client. When I want to ssh from my server machine the following error occur "connection refuse". I execute the following command on clien machine "/etc/init.d/sshd start". It shows the following error just after command execution "sshd re-exec requires execution with an absolute path".
View 1 Replies View RelatedIn my sshd_config file I have the following
Code:
Does this mean that all of my network interfaces are listening as opposed to just one specific network interface? Would 0.0.0.0 include 127.0.0.1?
Also, this computer(A) is on a LAN at my house. It has two network interfaces(eth0 & eth1), both on different subnets. I can connect from another computer(B) on my LAN to this one on one interface(eth0) via SSH just fine. The other interface(eth1) on this computer is hooked up to it's own gateway to the internet using DSL. I'm using this interface(eth1) for running bind.
Anyhow, here's my issue. When using a computer(C), which is a hosted VM , from outside my LAN, to connect to computer(A) via SSH, I get connection refused. So I checked my hosts.deny & hosts.allow files, both empty. I run nmap from computer C and SSH comes up as closed. So I'm thinking it's a firewall issue.
Here's what my iptables -L looks like:
Code:
I've been meaning to learn more about iptables, but which chain is for which network interface? I have also tried running nmap from computer(C) to test bind out on tcp 53 that comes up closed. I run udp 53 and that comes up as closed but then again udp is funny because it's stateless. If I run netcat on udp port 53 from computer C I get a blank line as if it's still running. However, I get that for all other ports anyways so that's of no use.
Unless my AT&T DSL is blocking those ports. But if that were the case would the error 'Connection refused' come up when I try to connect via SSH?
What other tests can I run to troubleshoot?