OpenSUSE Network :: Gateway Changing The IP Address?

Mar 14, 2010

I am coming across a strange error with my gateway. When I do a "ping", this is what I get below:

k-63a5b848c6cb4:~ # ping simba
PING simba.gateway.2wire.net (192.168.1.69) 56(84) bytes of data.
64 bytes from k-63a5b848c6cb4 (192.168.1.69): icmp_seq=1 ttl=64 time=0.041 ms
64 bytes from k-63a5b848c6cb4 (192.168.1.69): icmp_seq=2 ttl=64 time=0.029 ms
64 bytes from k-63a5b848c6cb4 (192.168.1.69): icmp_seq=3 ttl=64 time=0.023 ms
64 bytes from k-63a5b848c6cb4 (192.168.1.69): icmp_seq=4 ttl=64 time=0.015 ms

Is the gateway doing something strange?

View 3 Replies


ADVERTISEMENT

OpenSUSE Network :: Create A Gateway Server That Allows Virtual Private Network Connections?

Feb 26, 2010

I have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.

View 7 Replies View Related

OpenSUSE Network :: Unable To Ping The Default Gateway When Using Custom Settings - Unreachable Network

Jul 17, 2011

I installed openSUSE on one of my work system. The network port wasn't working when I was installing, but works fine now (checked in Windows). But for some reason, I am not able to configure the network. I used both Dynamic and Static IPs (both work fine in Windows) but still no go. I am using Yast Control Center for this purpose. I can't even ping the default gateway when I am using custom settings. When I use dynamic settings, it says Unreachable Network.

View 7 Replies View Related

OpenSUSE Network :: Using As A Network Gateway - Renew DHCP Lease

Jul 15, 2010

Why trying to avoid ranting about my Linksys router, I'll try and keep things short. I have a Linksys router in which the default firmware was terrible and would not correctly renew its DHCP lease. After getting feed up with that I flashed dd-wrt on the router and now it works better but randomly DNS queries would stop being resolved. To rule out the chances that it is my ISPs DNS servers I switched my DNS to openDNS, same problem happens (although I have to admit openDNS is a lot better than what my ISP has).

Anyways I'm about feed up with it and about an inch away from drop kicking the thing out my window. To avoid that I figured I will give it one more change and instead of using my Linksys as my network gateway I'll move all of that to my home server, and make the Linksys just an wireless AP. Besides setting up DHCP, DNS, and iptables on the server is there anything else I will need to know and setup on the server to make this work?

Side note anyone using openSUSE for DHCP know if setting up reserved IPs for certain MAC address is possible?

View 2 Replies View Related

OpenSUSE Network :: Dropping Connection - Ignoring Default Gateway

Nov 1, 2010

I recently upgraded a 11.0 installation running on Xen Server to 11.3. I am experiencing frequent network disconnections now. The ip address and default gateway is assigned statically. However, the system seems to ignore the default gateway after a while. Then after several minutes it seems like it comes back.

Code:
root@poe5e:~/ > route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.111.0 * 255.255.255.0 U 0 0 0 eth1
172.16.107.0 * 255.255.255.0 U 0 0 0 eth0
link-local * 255.255.0.0 U 0 0 0 eth0
loopback * 255.0.0.0 U 0 0 0 lo
default 172.16.107.254 0.0.0.0 UG 0 0 0 eth0
root@poe5e:~/ > ping 172.16.107.254
PING 172.16.107.254 (172.16.107.254) 56(84) bytes of data.
64 bytes from 172.16.107.254: icmp_seq=1 ttl=255 time=0.515 ms
64 bytes from 172.16.107.254: icmp_seq=2 ttl=255 time=0.484 ms
64 bytes from 172.16.107.254: icmp_seq=3 ttl=255 time=0.496 ms
64 bytes from 172.16.107.254: icmp_seq=4 ttl=255 time=0.473 ms
^C
--- 172.16.107.254 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 2997ms
rtt min/avg/max/mdev = 0.473/0.492/0.515/0.015 ms
root@poe5e:~/ > traceroute orl3akm1n
traceroute to orl3akm1n (10.111.19.19), 30 hops max, 40 byte packets using UDP
1 172.16.107.250 (172.16.107.250) 0.405 ms 0.398 ms 0.357 ms
2 * * *

When my sessions suddenly die and I have to coax it into routing correctly again.

View 1 Replies View Related

Networking :: OpenSuSE / Yast / Network Settings: Gateway Eth0 Through Wlan1?

Dec 16, 2010

I have a laptop running OpenSuSE 11.2. I use the Yast menu to set up network settings via "traditional" ifconfig setup (not NetworkManager), because I found NM unusable in prior releases when doing network gymnastics such as router re-flashing, LAN reconfiguration, etc. where I needed control of the IP address, netmask, DHCP, tftp, etc. My laptop works fine with Yast "traditional" ifconfig configuration for eth0 connected to router to Internet. Works fine with Yast ifconfig configuration for USB WiFi as wlan1 to WiFi router to Internet. Also works fine for virtual machines on vmnets NAT-ed to the Internet. Works fine as long as there is only one network connection, that is.

Now, I have a second laptop. I want to network laptop #2 eth0 to laptop #1 eth0 for file transfer and/or Internet access WHILE laptop #1 is is linked to the Internet through wlan1. Unfortunately, I have not figured out how to get Yast/Network Configuration to do that. I have not been able to get Yast/Network Configuration to see both wlan1 and eth0 at the same time--when the Yast utility finishes, I do >ifconfig and >route, and I find that I have lost either eth0 or wlan1. Thus, when I do direct-connect file transfers, I loose the WiFi Internet connection on both machines.

I suspect that it might have something to do with Yast/Network Configuration utility not being able to handle two network interfaces on the host with different IP addresses. how to properly put an OpenSuSE machine on two networks simultaneously? And then how to turn on IP forwarding so that I can use laptop #1's WiFi as an Internet gateway for laptop #2?

View 1 Replies View Related

Networking :: Gateway Changing Hostname?

Mar 14, 2010

I am coming across a strange error with my gateway. When I do a "ping", this is what I get below:k-63a5b848c6cb4:~ # ping simba PING simba.gateway.2wire.net (192.168.1.69) 56(84) bytes of data.

64 bytes from k-63a5b848c6cb4 (192.168.1.69): icmp_seq=1 ttl=64 time=0.041 ms
64 bytes from k-63a5b848c6cb4 (192.168.1.69): icmp_seq=2 ttl=64 time=0.029 ms
64 bytes from k-63a5b848c6cb4 (192.168.1.69): icmp_seq=3 ttl=64 time=0.023 ms

[code]....

View 1 Replies View Related

Networking :: Gateway Changing The Hostname?

Mar 14, 2010

I am coming across a strange error with my gateway. When I do a "ping", this is what I get below:

k-63a5b848c6cb4:~ # ping simba
PING simba.gateway.2wire.net (192.168.1.69) 56(84) bytes of data.
64 bytes from k-63a5b848c6cb4 (192.168.1.69): icmp_seq=1 ttl=64 time=0.041 ms
64 bytes from k-63a5b848c6cb4 (192.168.1.69): icmp_seq=2 ttl=64 time=0.029 ms
64 bytes from k-63a5b848c6cb4 (192.168.1.69): icmp_seq=3 ttl=64 time=0.023 ms
64 bytes from k-63a5b848c6cb4 (192.168.1.69): icmp_seq=4 ttl=64 time=0.015 ms

Does anyone know what the problem could be?

View 1 Replies View Related

OpenSUSE Network :: Enable Static DNS Address For Mobile Broadband In KDE Network Manager?

Mar 5, 2010

How do I activate static DNS for mobile broadband. I can't find any place to write down this information. Settings are made in Network Manager - not Yast.

View 3 Replies View Related

OpenSUSE Network :: Error As "This Address Uses A Network Port Which Is Normally Used For Purposes Other Than Web Browsing

Jul 27, 2011

I am facing two issues with CUPS - 1. I have installed cups 1.3.9 over OpenSuse11 x86. Please check below -

cups:/usr/share/cups/banners # cups-config --version
1.3.9
cups:/usr/share/cups/banners # cat /proc/version
Linux version 2.6.27.7-9-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-12-04 18:10:04 +0100

I have added few printers over there and everything is working fine. I can also able to add - delete - modify any printers from "yast2 printer" command. I can also able to browse cups web interface via http://cups:631, but when I am going to manage the printers (start - stop - delete etc), none of the buttons are working in firefox5 not even in IE also. Older version of firefox is giving error as "This address uses a network port which is normally used for purposes other than Web browsing. Firefox has canceled the request for your protection." All other buttons are working properly.

2. LINUX - LINUX Printing - OK
LINUX - WINDOWS Printing - OK
WINDOWS - LINUX Printing - NOT OK

While giving printing from Windows machine (Printer attached on Linux), there is no problem to coonect the printers, but unable to print.

View 3 Replies View Related

OpenSUSE Wireless :: Network Manager Stuck On 'setting Network Address' Then Continuously Prompts For Hex Or ASCII Key

May 28, 2011

When I attempt to connect to a wireless network, the network manager asks me for the network's password, then says 'setting network address' for 20 or so seconds, then asks me for some random Hex or ASCII key in the same type of window I put the password in (Secrets for Noel -- KDE Daemon). Since a key is already typed into the window, I press OK, which then causes the network manager to go back to 'setting network address', then the window pops up again and keeps repeating itself.

I'm running Opensuse 11.4 with KDE, and my driver is ath9k. I don't know much about linux so please don't tell me to 'recompile this' or 'change this setting' without explaining how to do it. Please help, I've been unable to connect to wireless in OpenSUSE for 2 weeks now.

View 9 Replies View Related

OpenSUSE Network :: Can't Get An IP Address Yast2 And Network Settings Displays?

Jan 31, 2010

I've updated a desktop from 11.1 to 11.2 with the NET CD. After completion everything worked fine, though I have some issues with the NIC. been looking on the net and the provided solutions haven't been able to resolve the matter. After reboot I don't get an IP address, I go into Yast2 and network settings displays:

I have to delete the unknown device everytime after a reboot in order to get a new IP address. After that all works as it is suppsed to. I've been looking into the /etc/udev/rules.d/70-persistent-net.rules and deleted all that was in there,

View 6 Replies View Related

Programming :: How To Get Gateway Address

Nov 18, 2010

you know ,we can get a Iface's MAC Address,IP Address,NetMask by function ioctl(), But how Can I get a Iface's Gateway by ioctl or other funciton!

View 5 Replies View Related

CentOS 5 Networking :: How To Set Gateway IP Address

Apr 12, 2010

I have a requirement of switch between wireless network with a single wireless device. First it should be switched to adhoc mode and then after sometime switch to infrastructure mode to establish internet connection. Everything works fine except the gateway settings.

I have used:
system("route add default gw x.x.x.x dev wlan0") to set the gateway, where x.x.x.x is gatewayip address.
I have used this whenever switching happens in addition to ifconfig command to set the ip address and netmask. But this is not setting the gateway ip address. How to set gateway IP address?

System details below
OS :CentoS 5.3
Kernel :2.6.18

View 3 Replies View Related

Fedora Networking :: Change In Gateway Address?

May 26, 2009

OS:Fedora core 6

I have just changed my gateway address,now I can access internet with my browser but unable to run add/remove software as it says no network connection available,system updates are not working as well. What should I do make these working?

View 4 Replies View Related

General :: Get Ppp Interface Gateway Address In Debain 6

Jun 10, 2011

I am using debain 6 and using a Sierra modem c888 to connect internet. I am using wvdial package for connecting the modem. I am able to connect internet. The question I have is, how do get the gateway address of the newly created ppp0 interface?

View 1 Replies View Related

Networking :: Getting Default Gateway Ip Address On Interface From ISP

May 4, 2011

Im trying to achieve the multiple uplinks/provider found on LARTC.org. I have to get the IP addresses from my interfaces (EF1 and EF2) by using a script, but i dont know where to look at for the default gateway from each interface which got their ip address from my ISP.

View 1 Replies View Related

Networking :: Change Static Gateway Ip Address?

Mar 31, 2010

when I do "route -n", I got:

Code:

Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0

I need to change the static configuration, like I 169.254.0.0, I don't know how it got there also I want to delete 192.168.1.1 from a static gateway. How can I do this?

View 2 Replies View Related

General :: How To Configure IP Address / Gateway In Ubuntu 9.10

Mar 2, 2010

As a new user I like to know how to configure ip address, gateway etc in ubuntu 9.10. I used opensuse 11.1, their I can manage to do these but ubuntu I did not find anything.

View 2 Replies View Related

Ubuntu Networking :: Eth0 Can't Hold The Gateway Ip Address

Aug 21, 2010

I would like to configure the eth0 manually. I can configure the ip address and sub-netmask but the system can't hold my gateway ip address (I added). It will keep it 0.0.0.0. I have no problem when I getting IP address from DHCP server.

View 1 Replies View Related

Networking :: Hold Static Ip Address From A Different Gateway Router ?

Jul 6, 2010

I'm running Ubuntu 10.04 and my setup is as follows:

As you can see, I am directly connected to router 192.168.25.1, and so my ip address is 192.168.25.101. I want my ip address to be 192.168.13.101, and make router 192.168.13.1 my gateway router. Is this possible under the current physical layout (I do not want to have to connect directly into 192.168.13.1, but keep my computer where it is at)?

When I run tracepath, it shows 192.168.13.1 is one hop away.

What I've tried:

The problem is under this manual setup, I cannot ping 192.168.13.1 and running command netstat -rn returns the following:

View 2 Replies View Related

Server :: Setting Up The Static Ip Address With A 2wire Gateway From Att

Oct 22, 2010

setting up my ubuntu server I would also like to run ubuntu desktop for the GUI.

setting up the static ip address with a 2wire gateway from att.

View 4 Replies View Related

OpenSUSE Network :: Manually Changing DNS Settings?

Jan 8, 2011

once upon a time i manually entered my ISP's DNS servers in /etc/resolv.conf Now i have changed ISP, my old DNS setting are still present even though i have edited my resolv.conf file to my new ISP's DNS servers. Internet still works fine, i just want to use my new ISP's DNS as my old ISP will be closing its doors very soon. Am i doing something wrong, or better put.forgot to edit another file..? I did do this a while ago, so i apologise in advance for my incompetence. I'm stilling running 11.1 / Router has DHCP configured. my resolv.conf file is below

Code:
cat /etc/resolv.conf
### /etc/resolv.conf file autogenerated by netconfig!
#
# Before you change this file manually, consider to define the
# static DNS configuration using the following variables in the
# /etc/sysconfig/network/config file:
# NETCONFIG_DNS_STATIC_SEARCHLIST

[Code]...

View 9 Replies View Related

OpenSUSE Network :: Changing Hostname Via DHCP?

Jan 29, 2011

I cannot uncheck the "Change Hostname via DHCP" box because it is disabled. Next to it says "No interface with dhcp". How can I fix it? I'm using OpenSUSE 11.3/KDE4

View 3 Replies View Related

OpenSUSE Network :: How To Set IPs Address On My Server

Jan 25, 2010

How to set IPs address on my server using Linux Suse 10.0. Its an old system which was configured before, the type of the modem was changed were by i need also to change the some IPs on the server.

View 2 Replies View Related

OpenSUSE Network :: IP Conflict Address?

Mar 17, 2010

I installed 11.2 on VMware 6.03. My os is windows 7.When I try to go online a pop up showed up

View 1 Replies View Related

OpenSUSE Network :: Can't Get IP Address From DHCP

Jun 3, 2010

I had 200 workstation with both Windows XP and SuSe Enterprise Linux. Sometime, a few clients can't get IP address from DHCP with SuSe OS. With the same computer, if I reboot and chose Windows XP, it work fine. The log message or the boot message was "No IP Address yet ...backgrounding". I tried to reconfig network device, restart services, change another port, change another line LAN, set static IP Address .... but there's no luck for me.

View 5 Replies View Related

Ubuntu :: Getting A Gateway To The Internet When Setting Eth0 With A Fixed IP Address - Lucid Lynx

Jul 7, 2010

I have trouble getting a gateway to the internet when setting eth0 with a fixed IP address. The gateway address (192.168.2.1 my modem/router) resets to 0.0.0.0 whenever I apply the changes. DHCP works fine but I need a fixed address for my server.

View 6 Replies View Related

Networking :: Setup Firewall / Gateway Address And Dns / Give To Clients For Accessing Internet?

May 12, 2010

I have 17 system (sys1,sys2,sys3.....sys17) in my office, and i am willing to setup a dedicated system to act as a firewall for that i have selected sys1 with two NIC(eth0 for local network and eth1 for internet) and i have configured to access internet in my office for that i have opened a wellknown port 80.but my clients are not accessing the internet..

and please check my sample IP configuration !!!

interface : eth1 (ISP IP)just for example
IP :192.168.0.2
gateway:192.168.0.1
dns:202.56.230.5
dns:202.56.230.6

Interface : eth0 (my local lan )

192.168.1.1
255.255.255.0

IP address of xp clients ranges form 192.168.1.2 to 192.168.1.16 with default 255.255.255.0

my question is that which gateway address and dns i have to give to my clients for accessing internet ?...

View 1 Replies View Related

OpenSUSE Network :: Changing MAC Using Ifconfig Causes Connectivity Lost?

Jun 15, 2010

I am using Suse 10 sp2. By running ifconfig I am changing the mac address. Everything is happening successfully, but this is adapter losing the network connection. Even when I give a static IP. I am not able to ping any other IP.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved