Programming :: How To Get Gateway Address
Nov 18, 2010you know ,we can get a Iface's MAC Address,IP Address,NetMask by function ioctl(), But how Can I get a Iface's Gateway by ioctl or other funciton!
View 5 Replies
ADVERTISEMENT
CentOS 5 Networking :: How To Set Gateway IP Address
Apr 12, 2010I have a requirement of switch between wireless network with a single wireless device. First it should be switched to adhoc mode and then after sometime switch to infrastructure mode to establish internet connection. Everything works fine except the gateway settings.
I have used:
system("route add default gw x.x.x.x dev wlan0") to set the gateway, where x.x.x.x is gatewayip address.
I have used this whenever switching happens in addition to ifconfig command to set the ip address and netmask. But this is not setting the gateway ip address. How to set gateway IP address?
System details below
OS :CentoS 5.3
Kernel :2.6.18
Fedora Networking :: Change In Gateway Address?
May 26, 2009OS:Fedora core 6
I have just changed my gateway address,now I can access internet with my browser but unable to run add/remove software as it says no network connection available,system updates are not working as well. What should I do make these working?
OpenSUSE Network :: Gateway Changing The IP Address?
Mar 14, 2010I am coming across a strange error with my gateway. When I do a "ping", this is what I get below:
k-63a5b848c6cb4:~ # ping simba
PING simba.gateway.2wire.net (192.168.1.69) 56(84) bytes of data.
64 bytes from k-63a5b848c6cb4 (192.168.1.69): icmp_seq=1 ttl=64 time=0.041 ms
64 bytes from k-63a5b848c6cb4 (192.168.1.69): icmp_seq=2 ttl=64 time=0.029 ms
64 bytes from k-63a5b848c6cb4 (192.168.1.69): icmp_seq=3 ttl=64 time=0.023 ms
64 bytes from k-63a5b848c6cb4 (192.168.1.69): icmp_seq=4 ttl=64 time=0.015 ms
Is the gateway doing something strange?
General :: Get Ppp Interface Gateway Address In Debain 6
Jun 10, 2011I am using debain 6 and using a Sierra modem c888 to connect internet. I am using wvdial package for connecting the modem. I am able to connect internet. The question I have is, how do get the gateway address of the newly created ppp0 interface?
View 1 Replies View RelatedNetworking :: Getting Default Gateway Ip Address On Interface From ISP
May 4, 2011Im trying to achieve the multiple uplinks/provider found on LARTC.org. I have to get the IP addresses from my interfaces (EF1 and EF2) by using a script, but i dont know where to look at for the default gateway from each interface which got their ip address from my ISP.
View 1 Replies View RelatedNetworking :: Change Static Gateway Ip Address?
Mar 31, 2010when I do "route -n", I got:
Code:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
I need to change the static configuration, like I 169.254.0.0, I don't know how it got there also I want to delete 192.168.1.1 from a static gateway. How can I do this?
General :: How To Configure IP Address / Gateway In Ubuntu 9.10
Mar 2, 2010As a new user I like to know how to configure ip address, gateway etc in ubuntu 9.10. I used opensuse 11.1, their I can manage to do these but ubuntu I did not find anything.
View 2 Replies View RelatedUbuntu Networking :: Eth0 Can't Hold The Gateway Ip Address
Aug 21, 2010I would like to configure the eth0 manually. I can configure the ip address and sub-netmask but the system can't hold my gateway ip address (I added). It will keep it 0.0.0.0. I have no problem when I getting IP address from DHCP server.
View 1 Replies View RelatedNetworking :: Hold Static Ip Address From A Different Gateway Router ?
Jul 6, 2010I'm running Ubuntu 10.04 and my setup is as follows:
As you can see, I am directly connected to router 192.168.25.1, and so my ip address is 192.168.25.101. I want my ip address to be 192.168.13.101, and make router 192.168.13.1 my gateway router. Is this possible under the current physical layout (I do not want to have to connect directly into 192.168.13.1, but keep my computer where it is at)?
When I run tracepath, it shows 192.168.13.1 is one hop away.
What I've tried:
The problem is under this manual setup, I cannot ping 192.168.13.1 and running command netstat -rn returns the following:
Server :: Setting Up The Static Ip Address With A 2wire Gateway From Att
Oct 22, 2010setting up my ubuntu server I would also like to run ubuntu desktop for the GUI.
setting up the static ip address with a 2wire gateway from att.
Ubuntu :: Getting A Gateway To The Internet When Setting Eth0 With A Fixed IP Address - Lucid Lynx
Jul 7, 2010I have trouble getting a gateway to the internet when setting eth0 with a fixed IP address. The gateway address (192.168.2.1 my modem/router) resets to 0.0.0.0 whenever I apply the changes. DHCP works fine but I need a fixed address for my server.
View 6 Replies View RelatedNetworking :: Setup Firewall / Gateway Address And Dns / Give To Clients For Accessing Internet?
May 12, 2010I have 17 system (sys1,sys2,sys3.....sys17) in my office, and i am willing to setup a dedicated system to act as a firewall for that i have selected sys1 with two NIC(eth0 for local network and eth1 for internet) and i have configured to access internet in my office for that i have opened a wellknown port 80.but my clients are not accessing the internet..
and please check my sample IP configuration !!!
interface : eth1 (ISP IP)just for example
IP :192.168.0.2
gateway:192.168.0.1
dns:202.56.230.5
dns:202.56.230.6
Interface : eth0 (my local lan )
192.168.1.1
255.255.255.0
IP address of xp clients ranges form 192.168.1.2 to 192.168.1.16 with default 255.255.255.0
my question is that which gateway address and dns i have to give to my clients for accessing internet ?...
Programming :: Pass Ip Address, Port Address And Some Parameters From Command Line?
Apr 1, 2011I want to pass ip address,port address and some parameters from command line using python script.The ip address and port address for establishing socket connection and remaining parameters to execute different connection.
View 1 Replies View RelatedProgramming :: Shared Memory Address Area In Process Address Space?
Feb 21, 2011if i attach a shared memory to my process whch part of the address space it will add(like stack, heap, data, code...).
View 3 Replies View RelatedProgramming :: Physical Versus Virtual Mac Address And Mac Address From NIC's Firmware?
Apr 6, 2011I need a small shell based program that prints the mac address of physical ethernet adapter from it's firmware. I need this utility for license generation and appliance activation. I have tried several example but none of them is flawless, The easiest method I have found is to parse the output of "ifconfig" command but it has also some drawbacks.
1. Firstly program should differentiate between physical and virtual adapters. Physical means installed on board(wired or wireless) or installed additionally. Virtual adapters are those created by VPN or created by virtualization apps such as VirtualBox/VMWare etc. I am not interested in virtual ones.
2. In case of more them one physical adapters(wired and wireless), it should print the mac address and description(name & vendor) of both/all adapters.
3. If media is disconnected then also it should be able to read the mac address and description(name, vendor) of card.
4. This one is bit complex. I know that 'ethtool' can show you the universal mac address but it's limited to use only 2 types of drivers and won't work in all cases.
Programming :: Translate Virtual Address To Physical Address In Application?
Nov 18, 2009I want to translate the virtual address to physical address in linux C application, how to do that?
View 1 Replies View RelatedProgramming :: Access At Physical Address - I/O Address In My Map Memory?
Dec 17, 2008When I try to access at physical address (0xD0000), we known that it is necessary to convert physical address to virtual address using function IOREMAP(0xD0000, 1024) and return me 0xC00D0000.
Now our doubt is when I have a board with I/O in address 0x150, is it necessary to convert this address to other virtual address??? or with inb(0x150) return me state of I/O in this address? How can I known where is this I/O address in my map memory?
Programming :: Set Gateway Using C++?
Nov 26, 2010I'm trying to set the gateway with my c++ program. My function receive the gateway on the first parameter.
The return of execution of ioctl() is 0, so it's working good, but when I run the "route" command on console, the configured gateway isn't there.
Check the output and the function below:
$ route
Quote:
Destination Gateway Genmask Flags Metric Ref Use Iface
10.0.0.0 * 255.0.0.0 U 0 0 0 eth0
[Code].....
Programming :: Find The Mac Address For A Given Ip Address?
Feb 16, 2010I am trying to find out the mac address of the eth0 port on linux probe. This port is controlled by kernal and hence I don't have control over it. How do I find out the mac address of this port ? Is there any system call which will take the ip address and will do the lookup on the linux's ip table to get the mac address ?
View 6 Replies View RelatedProgramming :: Delete The Default Gateway Via NETLINK Kernel API?
Apr 15, 2010I am looking for a way to delete the systems default gateway from the routing table via the NETLINK API.Unfortunately, the documentation I found about NETLINK is incomplete.There are some basics (communicating with the kernel, reading the routing table) but not much more.Does anyone know the packet format for deleting a routing table entry, especially deleting the default gateway? I can set or change the default gateway with the following parameters (there are more, but I left out all the non-essential ones):
NL-Msg Header:
nlmsg_flags = NLM_F_REQUEST | NLM_F_CREATE;
nlmsg_type = RTM_NEWROUTE;
[code]....
Programming :: The IP On The Second Address?
Sep 24, 2010when i do nslookup by name (loop2) i get the followings:
Code:
#nslookup loop2
server: mainsrv-local.local
[code]...
Programming :: Compress Ip Address Ranges?
Sep 19, 2010I've googled til my brain went boom... So the short story goes; I have lots of ip address ranges in multiple files which need to go into an iptables firewall... Sounds simple right?
Example of files:
1.0.1.0-1.0.1.255
1.0.1.0-1.1.0.255
[code]....
Programming :: Extract URL From Firefox Address Bar ?
Nov 27, 2010I'm trying to create an application that monitors, among other things, what site the user is currently viewing. I would like to know if there is any way to get the current URL from the Firefox's address bar on a Linux machine. I know that under Windows I can use the DDE server approach, but under Linux this task is proving very tricky. I've considered an approach involving an extension to Firefox, but this would require the user to install the said extension himself. Which is not something I want. If an extension can be installed by a different program's installer than that could work, but I don't know if that's possible or not.
View 14 Replies View RelatedProgramming :: Getting Multicast Address From Recvfrom
Mar 1, 2010I'm using at struct sockaddr_in to receive multicast data sent out from another machine. When I print out the source address using inet_ntoa it gives me the source address of the PC that sent the data. This is ok but I would like to know if there is a way of getting the multicast address that the data was 'sent to'. I know I can see the multicast address in tcpdump being directed to my PC but I would like to be able to display the multicast address too? Is this possible or does the sockaddr_in give me the source address of the packet not the multicast address that the packet was sent to?
View 1 Replies View RelatedProgramming :: Change MAC Address Via C Code?
Apr 12, 2010I need a way to change the machine MAC address via a C code in linux. Ive find a way to retrieve it but not to change it.
View 4 Replies View RelatedProgramming :: Get The Ip Address Of The Client Machine?
Jan 2, 2011I am connecting to linux server(RHEL4.7) using putty from my windows machine. Is there any way to get the ip address of my windows machine using C program in linux.
View 9 Replies View RelatedProgramming :: Packing Sockaddr_storage With Either V4 Or V6 Address?
Mar 29, 2011Running into a weird issue when packing sockaddr_storage with either v4 or v6 address.
To demonstrate the problem, I created a sample test program(limiting it to v4 only addresses). The problem was observed on MAC OS 10.5.8 and Linux RHEL kernel 2.6.9-42 with gcc as the compiler.
* Function packAddrs() runs a for loop packing v4 addresses into a single structure. The input address is same for every iteration, output memory size is adjusted using realloc.
* After successfully packing an address, it prints the packed structure contents using displayPackedAddrs()
* The output is fine for first two iterations. However, at the 3rd iteration, the packed contents seem to have got corrupted. It prints only the first packed address. I have tried using (malloc and memcpy) instead of realloc but no improvement.
Included below is the code and execution output.
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
[code]....
Programming :: Access The Address Of A Character Pointer?
Jul 12, 2010i was trying to access the address of the character pointer it gives me the values stored in the variable.
Code: #include<iostream>
using namespace std;
int main()
{
char *i;
[Code]....
why is my code not giving the address of the variable i when it is a character pointer.
Programming :: Extract Source Email Address - Awk?
Dec 17, 2010I have a small bash/awk program that extracts the date/time/size of thousands of email headers. I'm trying to also extract the last "Received from:" string from these email headers which will give me the senders email server. on extracting the last occurrence of this string, and printing the information after it?
View 3 Replies View Related