Networking :: Change Static Gateway Ip Address?
Mar 31, 2010
when I do "route -n", I got:
Code:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
I need to change the static configuration, like I 169.254.0.0, I don't know how it got there also I want to delete 192.168.1.1 from a static gateway. How can I do this?
View 2 Replies
ADVERTISEMENT
Jul 6, 2010
I'm running Ubuntu 10.04 and my setup is as follows:
As you can see, I am directly connected to router 192.168.25.1, and so my ip address is 192.168.25.101. I want my ip address to be 192.168.13.101, and make router 192.168.13.1 my gateway router. Is this possible under the current physical layout (I do not want to have to connect directly into 192.168.13.1, but keep my computer where it is at)?
When I run tracepath, it shows 192.168.13.1 is one hop away.
What I've tried:
The problem is under this manual setup, I cannot ping 192.168.13.1 and running command netstat -rn returns the following:
View 2 Replies
View Related
May 26, 2009
OS:Fedora core 6
I have just changed my gateway address,now I can access internet with my browser but unable to run add/remove software as it says no network connection available,system updates are not working as well. What should I do make these working?
View 4 Replies
View Related
Apr 11, 2010
I have followed some instructions to change to a static ip address and have now lost my connection to my router. The mistake I made was not copying the original "interfaces" file before making changes.The file originally had: auto wlan0 iface wlan0 inet (something - I thought it was loopback but didn't work when I added it).
The instruction told me to put:
auto eth0
iface eth0 inet static
address 192.168.1.100
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1
Which I did, using my own ip numbers, except for "broadcast". I didn't add that in because I didn't have a clue what to put there. When it didn't work, I tried putting it back to what I originally had except I can't rememebr that last bit. I added dhcp instead of what I thought it was but this didn't work either.
View 9 Replies
View Related
Jan 16, 2010
Can't change from dhcp to static ip address.I've installed Oracle's version of Linux Redhat 5, but I'm having no success changing from dhcp to a static IP address. My machine is plugged directly into a Belkin router which has the IP address: 192.168.2.1.If I use the gui: /usr/bin/system-config-network and set the network device to dhcp,it works fine. But if I set the IP address manually, I get no internet traffic, and if I ping an internet website, "network unreachable".The installation instructions for Oracle say that they want a full domainname. I've tried gateway.2wire.net. This worked in the last place I did a successful installation.It was the address of my ATT router. If I plunked that into a browser, I got the router configuration.
View 7 Replies
View Related
Oct 22, 2010
setting up my ubuntu server I would also like to run ubuntu desktop for the GUI.
setting up the static ip address with a 2wire gateway from att.
View 4 Replies
View Related
Nov 14, 2010
Does anyone know an easy way to do this? I can't seem to figure it out.
View 6 Replies
View Related
Jul 12, 2011
I have 2 lancard eth0 connected to local lan eth1 connected to bsnl broadband connection, I have centos 5.3 here I configure broadband in dial up mode. I am unable to ping outside world and unable to access some site but able to access internet like google etc, configure file is as:
eth0 Link encap:Ethernet HWaddr 00:14:85:96:1C:A7
inet addr:182.x.x.24 Bcast:1182.16.255.255 Mask:255.255.0.0
inet6 addr: fe80::214:85ff:fe96:1ca7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:736487 errors:0 dropped:0 overruns:0 frame:0
TX packets:859918 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:122617961 (116.9 MiB) TX bytes:772581200 (736.7 MiB)
Interrupt:185 Base address:0x6000
eth1 Link encap:Ethernet HWaddr 00:08:A1:7B:A0:F9
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::208:a1ff:fe7b:a0f9/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:658246 errors:0 dropped:0 overruns:0 frame:0
TX packets:620456 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:728744445 (694.9 MiB) TX bytes:100768525 (96.1 MiB)
Interrupt:193 Base address:0x4000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:21198 errors:0 dropped:0 overruns:0 frame:0
TX packets:21198 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:5867015 (5.5 MiB) TX bytes:5867015 (5.5 MiB)
ppp0 Link encap:Point-to-Point Protocol
inet addr:59.xx.xx.xx P-t-P:59.xx.xx.1 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1460 Metric:1
RX packets:793 errors:0 dropped:0 overruns:0 frame:0
TX packets:968 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:528818 (516.4 KiB) TX bytes:148274 (144.7 KiB)
[root@venus ~]# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
59.xx.xx.1 * 255.255.255.255 UH 0 0 0 ppp0
192.168.1.0 * 255.255.255.0 U 0 0 0 eth1
169.254.0.0 * 255.255.0.0 U 0 0 0 eth1
182.xx.0.0 * 255.255.0.0 U 0 0 0 eth0
default * 0.0.0.0 U 0 0 0 ppp0
I am unable to ping gateway of ISP IP i.e gateway of static IP.
View 1 Replies
View Related
Dec 16, 2010
Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.
So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.
My files are as follows:
View 2 Replies
View Related
Mar 7, 2011
Im running ubuntu server 10.10 on my wirtual mashine at home. For now i have few service installed and configured:apache with phpand mysql support,ftp,phpmyadmin.. My ip address is not static, i tryed to configure by following some guide but without success.
First i edit this in /etc/network/interfaces (changing dhcp to static
Code:
# The primary network interface
auto eth0
iface eth0 inet static
[Code].....
View 9 Replies
View Related
Jan 18, 2011
I have a temporary system up with wlan0 and eth2.
I want the eth0 address to be the gateway for accessing the internet on wlan0.
How do I setup static routes?
I'm not too keen with networking...
Code:
View 1 Replies
View Related
Apr 26, 2010
I got this message on Friday from just one domain. uote:mailsrv.forthnet.gr #<mailsrv.forthnet.gr #5.5.0 smtp; 554 5.5.0 Your message was considered to be spam by the FORTHnet Antispamming Policy and was not delivered to the recipient. The following spam tests returned positive for this message:FORGED_RCVD_HELO,RCVD_IN_BRBL. For further information visitWe are not a spamming community but it seems we have a statice IP address that has a Reverse lookup to "myipaddress.static.lyse.net" and not my email domain. Would setting a cname mail.mydomain.no -> myipaddress.static.lyse.net cure this problem or are there more tricks to be performedOnce I have cured the FORGED_RCVD_HELO I can move to getting the IP removed from BARACUDA.
View 2 Replies
View Related
Jul 29, 2011
I have a fedora 14 box which has a static IP and I can not contact the internet or even my gateway router.I know it has to do with my kernal IP routing table but I can not find the command to do what I need...Here is my kernal IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
My gateway is 192.168.1.1 and my static IP is 192.168.0.2.
View 3 Replies
View Related
Apr 12, 2010
I have a requirement of switch between wireless network with a single wireless device. First it should be switched to adhoc mode and then after sometime switch to infrastructure mode to establish internet connection. Everything works fine except the gateway settings.
I have used:
system("route add default gw x.x.x.x dev wlan0") to set the gateway, where x.x.x.x is gatewayip address.
I have used this whenever switching happens in addition to ifconfig command to set the ip address and netmask. But this is not setting the gateway ip address. How to set gateway IP address?
System details below
OS :CentoS 5.3
Kernel :2.6.18
View 3 Replies
View Related
May 4, 2011
Im trying to achieve the multiple uplinks/provider found on LARTC.org. I have to get the IP addresses from my interfaces (EF1 and EF2) by using a script, but i dont know where to look at for the default gateway from each interface which got their ip address from my ISP.
View 1 Replies
View Related
Mar 15, 2010
i have a ubuntu 9.10 server on a wlan behind a debian server/router/firewall.i have had dhcp assigning the ip address to the server and then accessing the server through a port forward that has been working okay.i want to assign a static ip address to the server so that i wont have to worry about checking that as i reboot the system and so forth.
View 10 Replies
View Related
Aug 21, 2010
I would like to configure the eth0 manually. I can configure the ip address and sub-netmask but the system can't hold my gateway ip address (I added). It will keep it 0.0.0.0. I have no problem when I getting IP address from DHCP server.
View 1 Replies
View Related
Mar 21, 2011
I am trying to set up a static ip address. I am using the visual interface. The problem may be that I don't know what they mean by "DNS servers" the linksys says it is 0.0.0.0 but entering that doesn't help. It says "connected" on the "notification area" icon, but I have no internet. I have rebooted the computer and the router.I deleted Auto eth0 and when I added a new connection it is now "Wired connection 1". If I change it to "automatic DHCP" instead of manual, it works fine.What am I missing, I have easily been able to set static IPs on WinXP machines, I would think Ubuntu would be easier.
View 4 Replies
View Related
Oct 29, 2009
I cannot get a static IP to work on Fedora 11. Using Network Manager, I set the IP to 192.168.1.130, the subnet mask to 255.255.255.0 and the gateway to 192.168.1.0 but it doesn't work. I also tried 192.168.1.1 for the gateway, which is what I used in FC7 but still no luck. I verified that these are the settings that I used in FC7, I don't remember ever having a problem before with this.I do remember someone telling me not to use Network Manager in conjunction with Network Configuration... does that make sense? That was for FC9 on my laptop and it was for the wireless so perhaps that doesn't apply here. I did try unchecking the box for Network Manager and using strictly Network Configuration but it still didn't work.
View 10 Replies
View Related
Aug 2, 2011
I'm using a 3G+ stick, by Sfr in France.
Is it possible to get a static local ip address ?
I wasn't able to find the answer with google.
View 3 Replies
View Related
May 19, 2009
I am running 2.6.27.21:170.256.fc10.i686 on my laptop.
I am trying to connect to a network at a university in China right now and I cannot figure out how to connect.
IP: 192.168.213.179
subnet mask: 255.255.255.0
default gateway: 192.168.213.1
DNS: 202.202.96.33
DNS: 61.128.128.74
View 5 Replies
View Related
Apr 18, 2010
My new line provider/ISP won't give me a static IP address - it's DHCP or nothing. Is there some trick I can use to allow myself to host a web page? I was thinking of getting a static address elsewhere, like at my sometime place of employment, and redirecting, but it just moves the problem downstream.Realistically, assume I leave my computer on and hardly ever reboot (CentOS is pretty stable), then will I typically keepthe same address for weeks or months at a time? If so, I could live with logging in to my registrar a few times a year to change the address, as bizarre as that would be
View 5 Replies
View Related
Jul 31, 2010
I am trying to find out if it is possible for me to have a static ip address with my 3G usb modem ? I am using gnome network manager in Ubuntu 10.04 but it there is no option for me there for a static IPV4 address. I know with a wireless or ethernet connection you would modify /et/dhcp3/dhclient.conf and/or /etc/network/interfaces. I don't think those two would do for a PPP connection. When I go to /etc/ppp/ I see no .conf file that I could modify.
View 2 Replies
View Related
Feb 17, 2009
I am a windows user with no linux experience prior to Friday. Im setting up a music server (SqueezeCenter) running Fedora 10.
With the help of posts of this site Ive made good progress with complicated stuffnamely getting Samba and VNC working. My Fedora machine and my windows machines now see each others shared files, and I can control my Fedora machine from my windows machine. (The Fedora machine will ultimately be headless.)
But Im having trouble with a seemingly simple issue setting up my Fedora box with a static IP address. With DHCP enabled on my network Ethernet adapter, all works fine. I then used the System>Administration>Network menu to disable DHCP and to assign the same IP address that DHCP chose. When I do this, two cases need to be distinguished:
1. If I keep the box checked for Controlled by Network Manager, the Network Manager Applet reports a network connection, I nevertheless cannot access the internet, but my Fedora machine is able to communicate with my Squeezebox music player (connected to my network via my DSL modem Ethernet connections, and with a fixed IP address). 2. If I uncheck the box Controlled by Network Manger, then the Network Manager Applet reports no network connection and my Fedora machine is not able to communicate with my Squeezebox music player (and I of course have no internet connectivity).
Ive seen references on other posts suggesting that the Network Manager service be disabled. But I see no way to manually configure the network.
View 4 Replies
View Related
May 1, 2010
I want to force my IP address to 192.169.0.99but my router always allocates me 192.168.0.2I have attached a screen showing my settings.I'm using the broadcom wireless card to connect to the router?Any thoughts, I have tried to change the setting with and without the network manager.
View 3 Replies
View Related
Feb 4, 2010
Recently, I've set up Ubuntu Server 9.10 x86_64 (no GUI). I have two NIC cards in this machine. One is a wireless card that I would like to set a static IP address to. The other is an integrated NIC. Everything works just fine when I have everything set up under DHCP. I can ping both NIC cards with no issues. But as soon as I change over to a static setting, things work unexpectedly...
Things to keep in mind:
-All machines are running under the same subnet
-All machines are connected to a wireless router (freshly flashed with the latest firmware)
-This is a fresh install of Ubuntu Server 9.10 x86_64
--Static IP address on the WIRED (eth0) NIC works great. No issues. Can ping from my wireless laptop, and can ping from the machine to the outside world (ping google.com) as well as the gateway itself with excellent response times.
If I then turn on the WIRESLESS (wlan0) NIC after setting up a static address for it in /etc/network/interfaces, then turning the wlan0 on by issuing "sudo ifconfig wlan0 up", wlan0 shows up, but does not have an IP address associated with it, even though I set it up as static. I also cannot ping wlan0 from my laptop. I assumed that was because I needed to restart the networking service. So after issuing "sudo /etc/init.d/networking restart", I am able to ping wlan0 from my laptop with no issues.
Here is where things get strange. Lets say that I physically pull the plug on eth0. After dong this, wlan0 stops responding to the ping request that was initiated by my laptop at the same exact time. If I plug the cable back in, both eth0 and wlan0 begin to respond once again. But soon after I try to SSH to wlan0, wlan0 decides that it no longer wants to respond to the ping. I should note that it does ask me for a username and a password, but after I entered my password, the ping stops responding. Why should the wlan0 be affected in any way if something happens to eth0?
This all started when I set the server up with only a static configuration on wlan0. It appeared to be working well. I was able to ping the machine from my laptop as well as SSH into the machine. I went to bed and the next morning, I was no longer able to ping the machine. I let the ping run for a small amount of time with a few responses here and there. Then after a little more time of letting ping run, it tends to respond. Almost like I bothered it enough to decide that it was appropriate to start working again.
Ideally, I would like to have ONLY a wireless connection. But if I need to have eth0 up, it would be great to have option work as well. Bottom line is that my wireless is flukey. And I would like to find out why.
View 9 Replies
View Related
Mar 18, 2010
How can I give my VirtualBox OSE a static IP address. My virtualbox is running Windows Xp 32-bit, and I am wanting to give it a static IP Address.
For example, my ubuntu pc has the ip address, 192.168.2.101 I want my VirtualBox to have the ip address, 192.168.2.201
I also want my Virtualbox to have port 95 open.
View 1 Replies
View Related
Nov 10, 2010
I have an Ubuntu Server 10.04.1 that I have given a static IP address. Every six hours or so I will lose connectivity to it and when I type ifconfig to look at the network information, it has been given an address via dhcp. If I run the /etc/init.d/networking restart command the IP address goes back to my static address and things are fine for another 6 hours or so. Here is what is in my interfaces file:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 10.60.82.15
netmask 255.255.0.0
broadcast 10.60.255.255
gateway 10.60.254.254
This machine is also a DHCP server and I checked to make sure there are no other DHCP servers on my network. Right now my fix is to have a Cron job running that runs the reset command every 5 hours, but I would like to find a more permanent solution.
View 8 Replies
View Related
Feb 13, 2010
I want to configure a VPN over the Internet.I installed the 'openvpn' package, generated the key file, transfered it by a secure way to the client, and setted up the configuration file.
So, in that configuration file I input the IP addresses of the tunneled interfaces. Both IPs are static in the tunnel.
Then, I've heard somewhere that I can assign a dynamic configuration IP for the client. I do this registering a range.
Well, when I tried to change static IP to dynamic IP (changing '192.168.0.2' to '192.168.0.0/24') in the configuration file, the OpenVPN didn't work.
Obviously I don't know what I'm doing, and I really, don't believe that simply changing the IP will make it work, but I tried.
I hope I explained my problem as well.
My configuration file:
# OpenVPN Server Configuration File
dev tun 0
ifconfig 192.168.0.1 192.168.0.2
cd /etc/openvpn
secret key_file
In client I execute the 'openvpn' without the '--daemon' parameter.Then I want that my client uses a IP in a range (192.168.0.0/24, for example), instead of a static IP (192.168.0.2).I also thought to use a DHCP server, but I'm not sure that will work.
View 6 Replies
View Related
May 12, 2010
I have 17 system (sys1,sys2,sys3.....sys17) in my office, and i am willing to setup a dedicated system to act as a firewall for that i have selected sys1 with two NIC(eth0 for local network and eth1 for internet) and i have configured to access internet in my office for that i have opened a wellknown port 80.but my clients are not accessing the internet..
and please check my sample IP configuration !!!
interface : eth1 (ISP IP)just for example
IP :192.168.0.2
gateway:192.168.0.1
dns:202.56.230.5
dns:202.56.230.6
Interface : eth0 (my local lan )
192.168.1.1
255.255.255.0
IP address of xp clients ranges form 192.168.1.2 to 192.168.1.16 with default 255.255.255.0
my question is that which gateway address and dns i have to give to my clients for accessing internet ?...
View 1 Replies
View Related
