I have just installed opensuse and the codecs to replace windows on my laptop. This is my third day using open suse and some of the websites i try to open (amazon.co.uk, gmail.com and others) redirect to a chinese website called www.net.cn) This is the same with the firefox and opera browsers.
View 6 Replies
I'm looking for a programmatic way to run the equivalent of the below statement using SuSEfirewall2 and make it persistent:
iptables -t nat -A PREROUTING -s 192.168.1.4/32 -p udp --dport 514 -j REDIRECT --to-ports 51414
Yes I know I can add it to FW_REDIRECT in the config, but I really need to handle this on the CLI at run time (which the above statement does do), however... is there an iptables-save equivalent in SuSEfirewall2?
I installed Fedora 11 I386 DVD. I use firefox. Usually, I will go through some websites in Chinese. The Chinese characters can be recognized and displayed. However, there are several font sizes and font types in the same line. Usually, the last character is much smaller than others.
View 5 Replies View RelatedUsing Fluxbox, have tried this in XFCE and KDE. Chinese characters display properly in whatever browser I use online. I do need to see some in the file manager and this is not working.
I have installed the following chinese display files from Slack -
No results so far.
Ever since switching to openSUSE 11.1, I have been having problems with certain websites (using the version of Firefox that came with openSUSE 11.1). Some website's CSS code won't load until repeated reloads - for example, wachovia.com. I'll visit the website and it will be all distorted because the stylesheets did not load, and I will have to refresh a number of times before it becomes usable. Other website's images won't load until multiple refreshes, like facebook.
Is this an openSUSE issue? An openSUSE interaction with Firefox issue? I've never had this problem on XP or Ubuntu.
I have a firewall/router box running openSUSE 11.2 between the outside world and the LAN. This router also provides DNS for the LAN and has SuSEfirewall enabled. LAN users need (almost) full access to the internet. However, I want to block certain sites which are not required for work (you name it: facebook is my candidate). What is the most elegant way to block certain sites (which have quite a lot of different IP numbers) ?
View 2 Replies View RelatedI'm completely new to this whole hosting on linux thing. I'm using apache2 and have everything setup as if I was doing it on a windows machine but when I navigate to the site via URL it displays the source code as plan text and thats all I see. I'm running openSuse 10.3.
View 9 Replies View RelatedI was saddled with the job of maintaining my department's website (I work at a college). When I still used windows I would access my department's folder on the web server using the following procedure: (in windows XP) go to the start menu > click 'run' > enter the folder address, I would be prompted for my login and password. The folder, and the whole server in fact, would then be visible in the windows file browser, under the 'networks' icon. I could then navigate to my department's folder and modify the files I need to to update the website.
How do I do this in Opensuse (using Gnome). I tried going to 'network' in nautilus and then 'open location' but no luck. I also tried 'connect to server' in nautilus (in the 'file' menu), but again no luck. which I could stomach if my college provided reliable access to computers on campus, but they don't so I have to use my laptop, which is now windows free . My current job is only going to last for a few more months, so having only so recently got rid of windows I am reluctant to re-install it just for this purpose (which is just about the only reason I currently have for using windows - the other is being able to download audiobooks from the public library, but that's another matter).
Found about this website in vector linux site,you can check before you buy if the wireless adapter works with linux or not, so I think is a good tool to check wireless adapters by manufacturer, interface or chipset, it even have links to the drivers websites,
[URL]
The putty connection is ok, FTP also. Apache is on. Could be something at the firewall?I am trying with the IP and a directory at lampp/htdocs.
View 3 Replies View RelatedI have been trying to make it possible to upload images on my website via a web browser. I have created the HTML form, I can browse to my desktop and upload an image. But my question is, where is it on my server after I upload it? I am running 8.04 on my server.
View 3 Replies View RelatedThe issue I'm having is that browsers in Ubuntu 10.04 stall at the part of the process for loading web pages that is noted by the "Looking Up (website address)...". The page eventually continues to load, but it takes a long time. This problem effects all browsers on the machine (tried Firefox and Chromium). It is not a problem with the connection, because a Windows 7 laptop and even the Windows XP partition on the Ubuntu machine function as they should.
View 9 Replies View RelatedI am running opensuse with LAMP, and this is my first time setting up this type of server (usually am a windows junkie) My problem i am having is that I am unable to view my website from outside the local network. I have setup my router for a dynamic dns and forwarded all the ports through the router and the local firewall. I ran the apache setup through YAST2 and everything seems fine locally but when i attempt to access it elsewhere its not connecting. computechsolutions.dyndns.biz is the dynamic dns address i have setup through my router.
View 2 Replies View Relatedi am currently using monkey webserver on my linux machine for my website. I just recently found out that you can also stream music if you direct the web address to a folder inside the directory. The problem is when i try to click on a .avi all it wants to do is download the video instead of playing it in the browser or playing it in windows media player. What can I do to make an .avi to stream from my linux machine ( note this is for private use only so i can stream movies on my lunch break or when I am at a friends house this is not to share my stuff to the general public)
View 1 Replies View RelatedI have openSuSE 11.3 + KDE 4.4 running on a Thinkpad t400. Knetwork manager recognizes my wireless networks and the icon shows that my computer is connected. However, I am not able to connect to the web - browser, chat, twitter app - nothing works.
View 9 Replies View RelatedWhen I tried to log in this morning I couldn't until I enabled Java scripts in my Opera browser. This must be something "new and improved". Could someone confirm this? I would prefer "old and lousy" rather than open up my computer to the world at large.
View 1 Replies View RelatedOriginally after an installation of openSUSE 11.4, I had no internet connection at all, even when connecting with ethernet cable. But then I tried switching back to YaST and then back to Network Manager, and restarted a couple times, and now I have internet connection. DNS is also working, for Ping. The problem is that firefox does not use DNS and cannot resolve host names. I can use Firefox with IP numbers.
View 3 Replies View Relatedi have a problem with my new router and ubuntu 10.10. The problem is that my internet connection show me that my laptop had connect to internet but my browser can't open a website ( this problem is the same with my netbook ) to fix it always must turn it off and after on either it never makes.
View 4 Replies View RelatedI absoultely cannot figure this out... No matter which browser (FireFox, FireFox4, Seamonkey, etc) I try to use, I always get this error message:
Replace "seamonkey" with whichever browser stated previously.
I want to know if it's possible to write chinese character in the different applications (openoffice, thunderbird ecc) and how to do it (keeping the original language of the OS, talian)
View 6 Replies View RelatedHow do you install a Chinese character set on the computer so that I can read Chinese file names?
View 1 Replies View Related1. lp file_with_english_chinese2. lp -ozh_CN.utf8 file_with_english_chineseThe normal ascii characer prints ok but the chinese character are blank.
View 4 Replies View RelatedI've choice English as "primary language" in language configuration in Yast, and have also installed Chinese as secondary language.In most programs Chinese displays normally, like Evolution, Firefox, Dolphin, but in VLC media player and some other applications, Chinese couldn't be displayed properly.
View 8 Replies View RelatedI've installed 11.4 KDE x86-64,which downloaded last night,a GM version. Things working great except 2 thing : SCIM & wifi.SCIM Chinese input works great when 11.3 KDE,but in 11.4 KDE it ONLY works in Dolphin,not works in Firefox.........
View 5 Replies View RelatedI've been using pipes and redirects for a long time and just realized that I don't know exactly how they are different. I just know that if you want to store the output in a file, then you use >. Otherwise most of the time you just use |. difference between pipes and redirects?
View 1 Replies View RelatedI am trying to install OpenSwan VPN but get the following [FAILED] errors. I also changed the redirects but it still reports them as failed?Quote:
[root@localhost /]# /sbin/sysctl -w net.ipv4.conf.all.accept_redirects=0
net.ipv4.conf.all.accept_redirects = 0
[root@localhost /]# /sbin/sysctl -w net.ipv4.conf.all.send_redirects=0
net.ipv4.conf.all.send_redirects = 0
[root@localhost /]# ipsec verify
[Code]...
I'm trying to open a web page to automate some data checking, and I'm getting a "too many redirects" exception. I'm not experienced enough with Java to know what to try next, and would like some help.
I'll show the code for what I've tried, but first, details about the website:[URL].. The website is a series of aspx pages. Going to the above address in a browser gets you to "default.aspx"--a search page. You don't see the redirects (specifically to a Login.aspx page--which redirects back to default.aspx). I can get the search page with either Firefox or wget--and on the same computer that I'm writing the Java code on. So, Firefox and wget are doing something that my code isn't. Also, I'm not behind a proxy.
I've searched about the redirect exception, and one or two pages blame poor website development. That may be true, but I don't have any control over the website. So, fixing the website is not an option.
I did find this page where someone has the same issue. I used some code given in one of the responses to discover the default.aspx->Login.aspx->default.aspx redirection loop.
Much of my code was pulled from the Working with URLs and Working with Cookies tutorials from Oracle. I tried adding the cookie handler thinking that maybe Login.aspx was trying to create a session ID or some other connection-specific identifier. But either cookies are not the solution OR I just didn't code it the right way.
[Code]...
After more searching, I'm 99% certain it's a cookie-handling issue. I added some more code (not included in the above) that examines the full response from the redirect to the Login.aspx page. The response includes a Set-Cookie header for "ASP.NET_SessionId". Now to find some code that will store and send the session ID.
I have tested the networks at several schools in the area,and at the town hall. It is not possible to surf on www on any of these networks using a PC running Linux. My conclusion is that there has to be some kind of filtering of traffic that exclude PC's running Linux.
From the same PC I can send and receive email,I can ping and trace (mtr) addresses on www, and I can view webpages that are on servers on the inside of the filtering-gateway. The filter used is InterScan Web Security Virtual Appliance from TrendMicro I have also demonstrated for the admins at the town hall that using Linux-PC on a "clean" network, surfing is no problem. By doing these small tests I have demonstrated that Linux is not the problem.
Tomorrow I'm going to visit the network providers admins, so that they could see what happens when a PC running Linux tries to access www. What kind of things should I test to document, or find the problems? So far I have just used MTR to document slow respons, wget --no-proxy to document that www hangs and ends time out, ifconfig to show NiC settings, and route...
The network provider is the same company that refused to turn on IMAP on the exchange servers, resulting in 3 week without mail at our school. All the other schools had to upgrade Outlook in order to connect to the new exchange-server with MS MAPI settings.
I am creating podcasts that I like to download to my android phone. I host the podcasts on my home webserver and use dyndns for the website when outside the network. However, when I type in my dyndns website from inside my network, it will not work.
I realize i can use the ip address to get to the site, but since I use beyondpod for my podcasts, it's all saved in settings. So what i'd like to be able to do is download the podcasts to my phone from either inside or outside the network.
For some reason my soundcard is recording every playback sound. This become apparent when I was trying to make a Skype call and the other people couldn't hear me. I checked my sound preferences and noted that the input was recording what they say (they could hear an echo). Also if I played back anything it would redirect to them. This has never happened to me and I've made a lot of calls in the past.
I tested with Audacity and it records fine, but when I play back the recording, it redirects to the input channel so it's not a problem with Skype. (my soundcard is a VIA VT1708B 8-Ch). Somewhere I read that the output of aplay -l is useful.
Here it is:
